Loading…
Tenderkart now works inside Claude and ChatGPT: search and analyse tenders right from your chat
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹30.8 LAccepted-AOC | L1 | Accepted-AOC Being Lowest | |
| 2 | L2₹31.1 L+₹27,899.69 (0.91%)Rejected-Finance | L2 | Rejected-Finance Not Being Lowest | |
| 3 | L3₹31.5 L+₹65,075.63 (2.11%)Rejected-Finance PLOT NO RZ B 1 59 KH NO 534 535 BLOCK B 1 NEW ROHANPURA PP NO 1416 NAJAFGARH NEW DELHI 110043 | NEW DELHI | NAJAFGARH | DELHI | 110043 | L3 | Rejected-Finance Not Being Lowest | |
| 4 | L4₹33.3 L+₹2.5 L (7.95%)Rejected-Finance B 101 3RD FLOOR JHILMI COLONY DELHI 110095 | DELHI | EAST DELHI | DELHI | 110095 | L4 | Rejected-Finance Not Being Lowest | |
| 5 | L5₹33.4 L+₹2.6 L (8.37%)Rejected-Finance RZ D 29A GALI NO 05 SYNDICATE ENCLAVE NEAR DABRI MORE NEW DELHI 110045 | SOUTH WEST DELHI | DELHI | 110045 | L5 | Rejected-Finance Not Being Lowest |
Tender Value
₹33 L
EMD Value
₹66,000
Closing Date
3 Oct 2022, 6:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
GE (Central) Delhi Cantt-10
GE (Central) Delhi Cantt-10
PROVN OF CERTAIN SANCTION WORK IN THE AREA OF AGE B/R-I AGE B/R-II AND AGE E/M CENTRAL UNDER GE (CENTRAL) DELHI CANTT 10
2022_MES_547285_2
GE/C-46/2022-23
Open Tender
Civil Works
Item Rate
180 days
GE (Central) Delhi Cantt-10
GE/C-46/2022-23
9 documents required · 9 mandatory
₹500
Yes
GE (Central) Delhi Cantt-10
₹66,000
Yes
7 Oct 2022
13 Sept 2022
5 Oct 2022
13 Sept 2022
3 Oct 2022
20 Sept 2022
13 Sept 2022 - 20 Sept 2022
Amount
S & F Pre-painted galvalume aluminum Zinc coating GI based Corrugated steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws complete all as specified and directed.
M&L for MS work as in purlins, rafter, rails and fastenings and heavy bracket framing (Beam, tee, angle, channel or flat sections) includingdistance pieces, cleats etc.Fe 410 -W (GdeE- 250) quality A all as specified and directed.
M&L for Straight or Circular raking cutting Fair cutting n exc 10 cm width or girth on exposed surfaces of brickwork such as in splays, chamfers, etc.including rubbed finish and good well surface all as specified and directed.
M&L for Preparation of new or previously untreated steel surfaces of any description, over 10 cm width or girth, not otherwise described, and applying two coats of synthetic enamel paint over a coat of red oxide zinc chrome primer, complete all as specified.
M&L for machine pressed precast concrete interlocking paver block with gray cement and no pigment, any shape and size confirming to IS- 15658 -2006 of 60mm thickness, M-35 Gde,Over and including 25mm thick layer of sand complete all as specified and directed.
M&L for 100mm thick PCC (1:4:8) Ty D2 as in sub base over rammed earth. Complete all as specified and directed.
M&L Fibre reinforced translucent corrugated sheeting with two corrugations side lap fixed with coach screw and washer in roof .wall etc Incl dismantiling of sheet. Complete all as specified and directed.
Roughening/hacking surfaces of old concrete floor by picking, sweeping clean and washing down with water to remove dust, etc.Complete all as specified and directed.
M & L for 75mm thick cement concrete 1:3:6 type C2 (using 40mm graded stone aggregate) as in plinth protection laid in alternate bays filled with bitumastic filling & surfaces finished fair and even without using extra cement, complete all as specified.
M&L for cement concrete 1:2:4 type B1(using 20mm graded stone aggregate) as in blocks for hold fast, coping, including form work to concrete surfaces, complete all as specified.
Taking down cement plaster from brick or stone walls incl racking out joints hacking for key, scrubbing down with water etc. Complete all as specified and directed.
M &L 15mm thick ready mix cement plaster with bulk density 1.4 to 1.70 Kg per ltr, water ration 17 to 19 % by weight with compressive str as per IS 4031 part 6 applied as per the manufactore instr including necessaery cement screed and prepartion of surface to received ready mix plaster. Complete all as specified and directed by Engineer-in-Charge..( (Water proofing compound shall be measured and paid separately)
Material and labour for preparation of new plastered surfaces as of walls and applying Two coats of weather proofing exterior acrylic emulsion paintof DULUXWeather shield Max or APEX ULTIMA from Asian paint over one coat of primer from the same manufacturer white lime wash complete all as specified and directed.
M&L FOR applying two coat of siver SHIELD BITUMINIOUS paint on APP MEMBRANE which is use for heat reflectore incl preparation of old surface complete all as specified and directed by Enginer in Charge.
M&L for 32 mm bore pipe Low density poly ethylene pipes (LDPE) of pressure rating 6 kg/ cm2 fix in wall and ceiling complete all as specified and directed.
M & L for Non skid 600x600x8 to 10mm thick coloured ceramic tiles(joint less) as in floor over hacking surface of existing floor on 15mm thick screed bed in CM 1:6 including pointing in coloured cement to match the shade of tiles including dismantling the old tiles. complete all as specified and directed.
Demolition of Brick work of stone/boulder masonry, build in cement mortar including all quoins, arches, pillars etc, but excluding ashlars facings, dressed stonework and precast concrete articles. complete all as specified and directed.
M&L for brick work with sub class 'B' brick straight or curved on plan exc 6 metre mean radius with old size bricks, built in cement mortar 1:6, complete all as specified.complete all as specified and directed.
S& F ( Fe 410-W( Gde-E250) quality-A) Framed work as in doors or gates of angle or other section with gusset plates, rails, braces, etc., complete, drilled for fixing of steel sheeting or other covering. Doors, etc. to be prepared for hanging or sliding with and including either hooks and hinges or steel hanging door fittings (exclusive of steel sheeting or other covering, running rails and guides) and hanging; also fastening and fixing complete
Cutting holes in brick wall built in cement mortar for inserting hold fasts, depth of embedded postion of hold fast /lugs measured from the face the jambs into the wall exc half brick but n.exc one brick thick and making good the dismantaled portion in cement mortar 1:3 or in cement concrete 1:2:4 type B-1, using 20mm graded stone agg complete all as specified upto six storey height. complete all as specified and directed.
S & F Expanded metal n exc 4 kg weight per square meter, cut to length, bent to shape required and tying with and including annealed mild steel wire not less than 0.9mm dia or fixing with galvanised steel staples supplied and fixed complete to wood or steel members all as specified and directed.
S&F 300mm long, stainless steel of AISI 316 grade, sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and fixed, complete all as specified.(Make-Kitch/Arch/Q-rail/D-line)
S&F 100 mm long mild steel butt hinges, medium weight, cold rolled and fixed. complete all as specified and directed.
M&L for excavating in post holes soft/loose soil (or similar holes) each n exc 0.5 cu. m, getting out, returning, filling in and ramming earth or broken rubble mixed with earth around, in layers not exceeding 25 cm, complete all as specified and directed.
M&L for Cement concrete type D2 1:4:8 (40mm graded aggregate) as in foundations, filling and mass concrete. complete all as specified and directed.
M&L for removing excavated soil materials n.exc 50m and depositing where directed at a level. complete all as specified and directed.
M&L for removing excavated materials to a distance exc 1.50 Km but not exc 5 Km outside defence land and depositing where directed.
S and F Framed work such as grills, gratings, etc.. with ends of bars shouldered and/or riveted, or forged into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walk ways; railings; framework of water tanks and similar work conforming to Fe.290.Gde-E-165. complete all as specified and directed.
M & L for applying three coat of cement base paint on newly plastered surfaces of walls including preparation of new surfaces complete all as specified and directed.
M&L for surface excavation n.exc (not exceeding) 30 cm deep and averaging 15 cm deep and getting loose /soft soil and getting out. complete all as specified and directed.
M & L for Chequered cement concrete tiles 20cm x20cm x 25mm thick,set, jointed and pointed in neat cement slurry in floors with grey cement and no pigment set jointed and pointed in neat cement slurry in floors, and cut and polished including 15mm thick screed bed in CM ( 1:6) complete all as specified and directed.
S&F for providing and fixing 9mm thick designer ceiling board in ceiling fixed with screws as per manufactures instructions (Make : Everest) laid on hot dipped galvanized iron imposed grid with 24mm wide T-section exposed flanges which shall be under coated white. The frame shall comprise of main runner made from 0.33mm thick galvanized steel sheet & size of 24x32x300mm and spaced at 12mm centres securely fixed to the structural soffits by approved hangers at 1200 mm maximum centres. hangers of GI wire 4mm dia to be fixed by the approved rowl plug, level adjusters and screws etc. The last hanger at the end of each main runner shall not be greater than 450mm from adjacent wall flush fitting of 1200mm long cross tee with(double stitching) to be inter locked between main runners at 600mm centre to from 1200x600mm modules cross tee longer than 600mm modules to be formed by fitting 600mm long cross tee, tee perimeter wall angle shall be of 0.45mm thick galvanized steel of size 19x19mm and 300 mm long of white colour all as per instruction complete all as specified & directed.
M&L 25 mm thick PCC 1:2:4, type B-0 using 12.5mm graded crushed aggregates as in floor surface all as specified and directed.
S&F mild steel as in hand rail, balusters, noising to steps, post and struts in fencing including cutting tops to shape as directed, drilling holes, notching for wire, drilling, bolting or riveting etc, conforming to Fe-290 , Gde-E-165 all as specified and as directed by Engineer-in-Charge.
S &F 3.15 mm dia galvanised steel chain link fencing, 100X100 mm mesh, made up into mattrsses or cages, lapped, wired a all as specified.
M&L mild steel TMT bars 10 mm dia and over conforming cut ot length bent to shape required incl cranking, bending & hoooking for columns ends & hinging with MS wire annealed not less than 0.90mm dia complete all as specified and directed .
S&F for mild steel screw bolts(machine made) with hexagonal or square heads at one end screwed the other, or screwed both ends, each screwed end to be fitted with washers and one hexagonal or square nut, length of bolt not exceeding 30 cm and dia of neack exc 12 mm but not exc 20 mm complete all as specified and as directed by Engineer-in-Charge.
All as per Item No. 37 above but 6mm dia & over upto 10mm dia but in stirrups. complete all as specified and directed.
S&F Powder coated 50 micron,anodised aluminium windows and ventilator shutters, fixed type without sash bars, etc;aluminium section weighing 0.55 kg/m includingnecessary joining cleats glazing clips rubber packing aluminium anodised snap beading screws etc complete all as specified .
S&F Powder coated 50 micron,anodised aluminum frame for windows/ventilators with one or more rebates incl incl grills, jointing cleats for fixing etc complete all as specified.
S&F Stainless steel wire cloth 0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed stainless steel wire staple, complete all as specified.
S&F for Solar control film 25 micron reflective type sticked to glass panes as per instructions of manufacturers
M&L for Solid PVC Wall Lining consisting of 5mm thick Plain colour PVC sheet inclusive of solvent cement and fixing at site on Aluminium Frame as per specifications and drawing complete all as specified and directed.
M& L Fibre reinforced translucent corrugated sheeting with two corrugations side lap fixed with coach screw and washer in roof .wall etc Incl dismantiling of sheet. Complete all as specified and directed.
M&L for Hardcore of guage exc 63mm but n exc 100mm, deposited spread and levelled in layers n exc 15cm thick, watered and rolled/rammed to a true surface. complete all as specified and directed.
M&L for 75mm thick Cement concrete type B- 2, 1:2:4 (40mm graded aggregate) even and smooth as in harrd standing. complete all as specified and directed.
M & L for light shade Virified Ceramic tiles 10 mm thick (square/ rectangular) polished, area of each tiles not exceeding 0.36 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match includin 15 mm thick screed bed in CM1:6 Complete all as specified and directed.
M&L for formwork to sides of Square or rectangular pillars, posts, struts, piers, columns and stanchions & foundation etc. rough finished complete all as specified and directed.
M&L for excavation in trenches n exc 1.5m wide and n exc 1.50m in depth for foundation etc and getting out in soft/loose soil complete all as specified.
Returning filling in, incl spreading levelling watering and well ramming in layers n exc 25cm (after the pipes have been laid and tested) in soft/loose soil complete all as specified.
M&L cement concrete 1:3:6 type C 2 (20mm graded stone aggregate) as in sub base, hard standing of 75mm thick, complete all as specified.
M&L Kota stone slab 18-20 mm thick with uniform texture in floor (size 580mm x 580mm) if stair case dont mention size in one length with laid over and including 15 mm thick screed in CM 1:6 and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing complete all as specified and directed
M&L kota stone with uniform texture of 18-20 mm thick in , skirting, dado and pillars in one single piece (size decided by Engineer-in-Charge) laid over and including cement screed 15mm thick in cement morter 1:4 and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing , bevelled edge of corner etc complete all as specified and directed.
M&L mild steel work as in tubular trusses including special shaped washer etc complete using ERW or induction butt welded tubes conforming to IS-1161-1979 grade St-240 including necessary welding etc complete all as specified and directed.
M&L cement concrete 1:3:6 type C 2 (20mm graded stone aggregate) as in sub base, hard standing of 75mm thick, complete all as specified.
Formwork to sides of concrete foundations, foorting rough finished surface of concrete fair or rough complete all as specified and directed.
Formwork to sides of pillars,posts, struts, piers, columns and stanchions, rough finished surface of concrete fair or rough complete all as specified and directed.
M&L for feinforced cement concrete normal mix (1:2:4) using 20 mm graded stone :aggregate as in foundation, footing complete all as specified and directed.
M&L for reinforced cement concrete normal mix (1:2:4) using 20 mm graded stone aggregate as in Columns, pillars, piers, posts and struts. Complete all as specified and directed.
M&L for applying three coat of W/Wass on newly plastered surface of wall including preparation of newly plastered surface.complate all as specified and directed.
M & L for Point wiring complete with 1.5 sqmm single core PVC insulated FRLS cable 1100 volts grade with multi stranded copper conductor drawn through Existing PVC conduit/cassing capping , including provision of 1.5 sqmm PVC insulated copper cable FRLS as earth continuty and fabricated branded modular metal flush box / M S Steel terminal boxes, concealed in walls with suitable modular inner and outer plate / 3 mm thick laminated top sheet cover for housing switches , socket out let and fan regulators etc , all as specified and as directed for the followings:- complete all as specified and directed by Engineer in charge.
(a) One 3 pin 5 Amps socket outlet point controlled by one way switch on independent board. complete all as specified and directed.
(b) One light/fan point controlled by one way switch complete all as specified and directed.
S&F switch Modular type 6 Amps 1 Way,1 module, 230V AC complete all as specified and directed by Engineer in charge.
Supply and fix LED batten luminaire surface mounted T-8, 4 feet system wattage of 22 Watts with lifetime of 50000 burning hours with 70% of its initial lumen maintained. CRI>80, Power Factor > 0.95, THD< 10%, colour temperature - 6500K, surge protection 2.5KV in CM, IP-20 protected, meets LED IS specifications, Class - 1, Short circuit and over circuit protection, voltage range - 150 to 270 Volts AC, temperature range 0 to 50 DegreeC, system efficacy at luminarie level > 100 Lumens/watt and including connecting up with PVC sheathed 1.5 sqmm 3 core copper conductor flexible wire from ceiling rose to fitting fixed complete all as specified and directed.
S&F Modular socket outlet 2/3 pin 6 Amp socket 2 module complete all as specified and directed by Engineer in charge.
Supply and fix wall mounted fan 400mm size, 230 volts , 50 Hz 1420 RPM with 90 degree oscillation and having speed control by pull cord (two) system complete all as specified and directed.
Schedule of Credit
stage.html
html • 0.07 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .