Loading…
Tenderkart now works inside Claude and ChatGPT: search and analyse tenders right from your chat
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹42.4 LAccepted-AOC | L1 | Accepted-AOC LOWEST AND REASONABLE | |
| 2 | L2₹52.3 L+₹7.5 L (16.8%)Rejected-Finance MAAN SAROVAR 96 SAI NAGAR GODHANI ROAD NAGPUR 440030 | NAGPUR | NAGPUR | MAHARASHTRA | 440030 | L2 | Rejected-Finance BEING L2 | |
| 3 | L3₹55.9 L+₹11.1 L (24.8%)Rejected-Finance | L3 | Rejected-Finance BEING L3 | |
| 4 | L4₹57.7 L+₹13.0 L (28.9%)Rejected-Finance | L4 | Rejected-Finance BEING L4 | |
| 5 | L5₹58.5 L+₹13.7 L (30.7%)Rejected-Finance 21 GURUKRIPA PATIL LAYOUT GOPLA NAGAR NAGPUR 440022 | NAGPUR | NAGPUR | MAHARASHTRA | 440022 | L5 | Rejected-Finance BEING L5 |
Tender Value
Refer Docs
EMD Value
₹93,600
Closing Date
15 Aug 2022, 6:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
GE AF NAGPUR
OFFICE OF GARRISON ENGINEER AIR FORCE VAYUSENA NAGAR NAGPUR- 440007
ADDITION ALTERATION TO OMQ 90, BOUNDARY WALL OF ACH AND PROVN OF JAFFERY WALL ALONGWITH GATE NEAR BLDG NO 331 AT VSN NAGPUROF ACH AT VSN NAGPUR
2022_MES_534061_1
GE/NAG/22-23/8542/17
Open Tender
Miscellaneous Works
Item Rate
240 days
GE AF NAGPUR
As per NIT
7 documents required · 7 mandatory
₹500
GE AF NAGPUR
₹93,600
4 Oct 2022
7 Jul 2022
22 Aug 2022
7 Jul 2022
15 Aug 2022
21 Jul 2022
Amount
Excavating in soft/loose soil in trenches, n. exc. 1.5m wide and n. exc. 1.5m in depth ; for foundation, etc. or for shafts , wells, cesspits, manholes, pier holes, etc. n exc 10 sqm on plan and n. exc. 1.5 in depth and getting out all as specified and as directed.
Excavating in hard/dense soil in trenches n exc 1.5 m wide and n exc 1.5m in depth; for foundation, etc. or for shafts, wells, cesspits, manholes, pier holes, etc. n exc 10 Sqm on plan and n exc 1.5 m in depth and getting out all as specified and as directed.
M&L for cement concrete type D2 1:4:8 (40mm graded aggregate) in foundations, filling and mass concrete complete all as specified and as directed.
Returning, filling in, including spreading, levelling, watering and well ramming in layers not exc 25 cm all as specified and directed
Removing excavated material exc 1.5km but n. exc. 5km and depositing where directed at a level n. exc. 1.5m above the starting point all as specified and directed
Demolition of brickwork or stone/ boulder masonry work any type of CM all as specified and as directed.
M&L brickwork with flyash bricks, straight or curved on plan exc 6m mean radius, built in CM 1:4 all as specified and directed by Engr-in-charge
M&L brick work with flyash bricks, straight or curved on plan exc 6 m mean radius, built in cement mortar 1:6 all as specified and as directed
M&L for brickwork except bricks, straight or curved on plan exc 6m mean radius, built in CM 1:4 etc all as specified and as directed
M&L for rendering 15mm th in CM 1:4 finished even and smooth without using extra cement all as specified and directed
M&L for applying two coats of cement based paint over over a coat of alkali resistant primer over newly plastered wall surfaces after necessary preparation all as specified and as directed by Engr-in-charge
M&L for Two coat of exterior emulsion paint of white or Air Force blue colour or equivalent colour as approved by GE , using ultra clean paint or Dulax ICI or Apex Ultima of Asian Paints or equivalent in Berger Paints over wall surfaces , edges of slab, roof/ chajja projection and column etc. after necessary preparation all as specified and as directed
Dismantling wrought iron or mild steel work of any description not otherwise provided all as specified and as directed
S&F Framed brackets of angles or tees with web and flanges cut to shape, drilled and countersunk for screw, including bending and welding angles, as necessary, gusset plates, rivetting etc n exc 10 kg each brackets, conforming to Fe 290 Gde E-165 (Brackets over 10 kg each to be measured under Structural steel) all as specified and as directed.
Refixing Framed brackets of angles or tees with web and flanges cut to shape, drilled and countersunk for screw, including bending and welding angles, as necessary, gusset plates, rivetting etc n exc 10 kg each brackets, conforming to Fe 290 Gde E-165 (Brackets over 10 kg each to be measured under Structural steel) all as specified and as directed.
M&L for preparation of new steel surfaces of any description, over 10 cm in width or girth, not otherwise described and applying two coat of synthetic enamel paint over a coat of red oxide primer all as specified and directed
M&L for rough formwork to Formwork to sides of pillars,posts, struts, piers, columns and stanchions all as specified and as directed
M&L for Fair finished formwork to sides of pillars, posts, struts, piers, columns and stanchions all as specified and as directed
M&L for rough finish formwork to Formwork to sides of concrete foundations, footings, bases of columns, raft and raft beams, sides and soffits (if any) of foundation and plinth beams; and similar work; vertical or to batterall as specified and as directed
M&L for Reinforced cement concrete M-25 (20mm graded aggregate) in foundations, including rafts, footings, foundation beams; plinth beams; bases for columns, etc.; basement slabs, under-reamed piles and mass concrete all as specified and as directed
M&L for RCC (nominal mix) type B1 1:2:4 (20 mm graded aggregate) in foundations, including rafts, footings, foundation beams; plinth beams; bases for columns, etc; basement slabs, under-reamed piles and mass concrete all as specified and as directed.
M&L for RCC M-25 (20mm graded aggregate) cement concrete in Columns, pillars, piers, posts and struts all as specified and as directed
M&L for RCC (nominal mix) type B1 1:2:4 (20 mm graded aggregate) in columns, pillars, piers, posts and struts all as specified and as directed.
M&L for Mild steel TMT bars 10mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, footing and plinth beams hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips all as specified and as directed
M&L for Mild steel TMT bars 5mm dia and over upto and including 10mm dia in stirrups, spacers and binders all as specified and as directed
Excavating in post holes (or similar holes) each in loose/soft n exc 0.5 cum, getting out in loose/soft soil, returning, filling in and ramming earth or broken rubble mixed with earth around, in layers not exceeding 25cm, watering, and removing surplus soil to a distance n exc 50 m and making good surface.
Dismantling of Plain or corrugated steel sheeting, any gauge, thickness, including Nainital or similar pattern roof covering all as specified and as directed.
S & F of Steel work in tubular trusses including special shaped washer etc. complete using ERW or induction butt welded tubes conforming to IS 1161-1979 grade St.-240 all as specified and as directed.
S & F of Poly carbonate sheet including aluminium profile with rubber beading and profile screws complete all as specified and as directed.
S & F of Pre-painted galvalume aluminium zinc coating GI based corrugated steel sheet 0.50 mm of an colour having tensile strength of 550Mpa as in roof covering / cladding to wall, fixed with self tapping screws all as specified and as directed.
Demolition of cement concrete (unreinforced) in ground floors and pavings n exc 15 cm thickness (below or above ground level) including floor finishes all as specified and as directed
Dismantling floor, hearth or wall tiling including cement mortar bedding and disposal of rubbish off the premises all as specified and as directed
M&L for providing PCC 1:2:4, type B1 (using 20 mm graded aggregate), 40 mm thick, finishing cement concrete surfaces even and smooth using extra cement all as specified and as directed
M & L for providing screed bed or bedding layer of mortar 15 mm thick for laying floor finishes in CM 1:6 all as specified and as directed.
M&L for rendering 10 mm thick in CM 1:3 for laying wall tiles or vertical surfaces (skirting/ dado etc) all as specified and as directed.
M&L for Glazed ceramic coloured tiles in vertical surface 300*450*7 mm thick set and jointed in neat cement slurry and pointed in white or colour cement to match in backing of skirting and dado all as specified and as directed.
S&F joint free Non-skid Coloured ceramic tiles 7 to 8 mm thick (square/ rectangular) area of each tiles exceeding 0.06sqm but not exceeding 0.11 sqm, in floors etc.set and jointed in neat cement slurry and pointed in white or coloured cement to match all as specified and as directed.
S&F in repairs 15mm dia Bib taps cast copper alloy with crutch or butterfly handles screwed down screwed for iron pipe fixed in repair all as specified & directed Code :FLR 5047N Quarter turn Make -Jaquar or equivalent in specified makes
S&F in repairs paper holder of fixed to walls with chromium plated (CP) brassscrews all as specified & directed . Code : AHS-1553 paper holder Made -Jaquar or equivalent in specified makes
S&F in repairs wash basins vitreous china (flat baci or angle back type andy size ,including cutting for and pinning in ends of brackets or erecting stand but inclusive of fixing of supply and waste pipe Code JDS-WHT-25501 semi-recessed Basin size (MM)400 xMake-430X525X165 all as specified & directed Make- Jaquar or equivalent in specified makes
S&F in repairs chromium plated shower roses with or without swevel joints andy size including fixing to steel pipe or union CODE- OHS 1789 over head shower 120mm dia all as specified & directed Make-Jaquar or equivalent in specified makes
S&F in repairs Glass shelf 22' with brass chromium plated railling all as specified & directed make jaquar Code: AKB-35771 or equivalent in specified makes
S&F in repairs Glazed shelf with brass chromium plated railling all as specified & directed make jaquar Code: CAN-1173 or equivalent in specified makes
S&F in repairs Towel rail of stainless steel including screws and wooden /plastic cleats make of jaquar Code: AHS 1581H towel Rack with lower hanger or equivalent in specified makes
S&F in repairs soap dish including fixed to plugs with chromium plated brass screws all as specified & directed make of jaquar Code :AQN-7731 or equivalent in specified makes
S&F in repairs Brass chromium plate concealed stop cock full turn regular body with adjustable wall flange size 15mm of and all as specified and as directed. make- Jaquar Code-CON-083 KN or equivalent in specified makes
S&F in repairs Brass chromium plated mode 3 in 1 wall mixture model regular half turn all as specified & directed make Jaquar . Code CON-281KN or equivalent in specified makes
S&F in repairs PVC mirror cabinet of size350x450mm of make PRAYAG PODUCT CODE NO551 or equicalent on COMMANDER including taking sown old inbuilt cabinet all as specified and as directed.
S&F in repairs Brass chromium plated tumbler holder all as specified & directed make Jaquar CODE: AKP-35741P or equivalent in specified makes all as directed
S&F in repairs Low level flushing cistren (exclusive of brackets) and connections to pipes and fixing of chain and pull or lever if any.make -Jaquar CHS-WHT-205 or equivalent in specified makes
S&F in repairs brass chromium plate pillar cock quarter turn type of central hole basin mixer with popup waste system with 450mm long braided hoses in all as specified & directed make -Jaquar FUS-29052 B or equivalent in specified makes
S&F in repairs water closet (squatt pattern cimplete includint provision of lime concrete beddingane vitreous china wash white (excluding fixing bolt ,fiushing cistern and flush pipe) (EWC) Code No- CNS-WHT-753SB in 'S' or 'P' trap Size 790 x350 x630 mm all as specified & directed Make-jaquar or equivalent in specified makes
S&F in repairs plastic water closet seat ,cover black ,closet pattern with flat bottom and cover and mild steel chromium plated or aluminised hinging device.Code No- CNS-WHT-111N (soft closing seat cover) all as specified & directed Make- jaquar or equivalent in specified makes
S&F in repairs 15mm dia 2 way Bib cock cast copper alloy with crutch or butterfly handles screwed down screwed for iron pipe fixed in repair all as specified & directed Code :OPL-15041 Make- jaquar or equivalent in specified makes
S&F in repairs brass chromium plate hand shower(Health faucet) with 1meter long easy flex tube in chrome finish and wall hook with NRV (back flow preventer) all as specified & directed Code No : ALD-577make Jaquar or equivalent in specified makes
S&F in repairs Towel rack 600mm long with lower hangersof CP with and including chromium plated brass screws and wooden /plastic cleats all as specified & directed jaquar Code: AQN-7781 make-Jaquar or equivalent in specified makes
S&F PVC waste pipe 32mm dia fixed to waste coupling complete all as directed .
M&L 20mm thick granite (of any type ) work (table rubbed and polished ) in steps, jambs, pillars, window cills, cooking platforms and like in cement (1:4) including pointing in wihte cement (1:2) using marble dust with admixture of pigment ot match with shade of granite all as specified & directed
M&L granite (of any type) tiles 20mm thick machine cut, in skirting/ dado laid over cement screed and jointed with grey cement slurry, and pointed with white cement with admixture of pigment to match the shade of granite stone including grinding and polishing complete all as specified & directed
Providing and fixing Powder coated aluminium (minimum thickness of powder coating 50 micron) work for doors, windows, ventilators and partitions (Fixed portions) with extruded built up standard tubular sections/ appropriate Z sections and other sections of approved make conforming to IS: 733 and IS:1285, fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions, i.e. at top, bottom and sides with required EPDM rubber/ neoprene gasket etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminium snap beading for glazing/ paneling, C.P. brass/ stainless steel screws, all complete as per architectural drawings and the directions all as specified & directed
Providing and fixing Powder coated aluminium (minimum thickness of powder coating 50 micron) for shutters of doors, windows & ventilators including providing and fixing hinges/ pivots and making provision for fixing of fittings wherever required including the cost of EPDM rubber/ neoprene gasket required (Fittings shall be paid for separately) with extruded built up standard tubular sections/ appropriate Z sections and other sections of approved make conforming to IS: 733 and IS:1285, fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions, i.e. at top, bottom and sides with required EPDM rubber/ neoprene gasket etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminium snap beading for glazing/ paneling, C.P. brass/ stainless steel screws all complete as per architectural drawings and the directions all as specified & directed
S &F tinted glass 5.5 thick, ordinary quality and glazing with oil putty in square exc 0.5 sq. m in each pane all as specified & directed
S&F 25mm thick Prelaminated particle board, exterior grade, prelaminated bothside with decorative choice lamination fixed with screws all as specified & directed
S&F aluminium anodised sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded section and fixing bolt and sliding bolts of extruded sections or cast aluminium alloy 300 mm long and fixed all as specified and as directed.
S&F floor door stopper of aluminium alloy body double and tongue anodised with rubber shoe and fixed of size 150 mm all as specified and as directed.
S&F aluminium anodised barrel tower bolt of extruded section 200 mm long and fixed all as specified and as directed.
S&F extruded aluminium alloy handle fabricated type anodised 150 mm long all as specified & directed
S&F Door closer hydraulically regulated, designation No 3, aluminium (die cast ) body, universal type, suitable for door shutters of 851 to 1000 mm in width and of weight between 61 to 80 Kg and fixed all as specified & directed
S&F Double action floor spring hydraulically regulated made up of minimum 1.25 mm thick aluminium alloy sheet foundation box, main body with stainless steel cover governing pivot made of brass, other parts made of mild steel heavy duty all as specified and directed.
M&L for factory made Machine pressed rubble moulded precast conctete interlocking paver block any shape and size with grey cement and pigments confirming to IS 15658-2006 of 60 mm thickness, M-35 Grade with 50 mm thick stone dust cousioning all as specified and directed
Supply and fix Framed work as in doors or gates of angle or other section with gusset plates, rails, braces, etc., complete, drilled for fixing of steel sheeting or other covering. Doors, etc. to be prepared for hanging or sliding with and including either hooks and hinges or steel hanging door fittings (exclusive of steel sheeting or other covering, running rails and guides) and hanging; also fastening and fixing complete all as specified & directed
Material and labour for machine cut kota stone flooring 20-25 mm thick over cement screed bed laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing and making 2 nos of 3mm thick grooves on edge of treads of staircase etc all as specified & directed
M&L concertina coil of 600mm dia including horizontal barbed wire for fixing the coil and necessary clips etc all as specified & directed
M& L for PCC (1:3:6) Type C-1 using 20mm graded aggregate in lintels upto 1.5m clear span, cills, steps; seismic and other similar bands, plinth courses, string courses, lacing courses, parapets and railings upto 60 cm in height, copings, kneelers, apex stones, bed plates, kerbs not provided for in Item 04028, water troughs and the like including weathering, slightly rounded or chamfered angles and throating, all as specified & directed
M&L providing precast cement concrete louvres and jallies, type B0 1:2:4 set in cement mortar 1:4, 25mm thick (measured solid), including all mouldings but excluding frame (precast frame shall be measured separately and paid for under item 04032) all as specified and as directed.
M&L for applying two or more coats of 100% premium acrylic emulsion paint having VOC less than 50 gm/ litre and UV resistance as per IS 15489:2004, alkali and fungal resistance, dirt resistance exterior paint of required shade (company depot tinted) with silicon additives @ 1.43 litre/ 10 sqm over and including priming coat of exterior primer applied @ 0.90 litre/ 10 sqm over new surfaces all as specified & directed
Supply, laying and testing cable XLPE Insulated ,screened, PVC bedded, galvanized steel strip or wire armoured, electric power cables (heavy duty) 1100 Volts grade with stranded aluminium conductor of size 6.0 sq mm 2 core all as specified & directed
M & L for High density polyethylene pipes (HDPE) of pressure rating 6 kgf/cm2 of size 25 mm dia laid in trenches for passing of LT cable complete all as specified and directed.
Supply & Fix integral 40 Watt LED post top light fixture IP 65 rated protection, resistant to impact and corrosion complete with all accessories & connector etc internally pre-wired and including connecting up with twin core twisted flexible copper conductor cable with suitable size, all as specified. Make : CG Cat Prt No. LPTO-40-CDL, Luker, Philips, Wipro.
Supply & Fix light grade GI pipe of size 40 mm dia including cutting, making thread for fixing garden post top light upon pipe with necessary fixing accessories complete with one coat of Aluminium paint over coat of redoxide on GI pipe all as specified and directed.
Supply and fix thermoplastic cable junction boxes IP 65 with metric knockout for cable entry with terminal of size 130 x 130 x 77 mm on pole with MS clamps, nut bolts, washers and glands suitable for 6 sq mm 02 core cable all as specified and directed
Supply & Fix MCB SP 6-32 Amps, breaking capacity 10 KA 'C' curve confirming to IS/IEC 60898-1 2002,integrated label holder, sliding bottom clamp , IP 20 protected terminal, sliding shutters, 240 volts, 50 HZ including making necessary incoming and outgoing electrical connection with suitable size of copper lugs etc all as specified & directed
M/s Prakash R. Verma
NEELKAMAL BUILDERS
M/s Ashwin Bhange
Asha Enterprises
stage.html
html • 0.05 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.04 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .