Special repairs to bldg No P-121 (Single Offrs Accn) and chain link fencing to selected areas at Aurangabad under GE (S) Ahmednagar

Amount

Demolition of cement concrete (un reinforced) in ground floor and paving n.exc 15 cm thickness, (above or below ground level) all as specified and as directed.

Demolition of brickwork or stone/boulder masonry, built in cement mortar or cement lime mortar including all quoins, arches, pillars, etc but excluding ashlar facings, dressed stonework and precast concrete articles all as specified and as directed.

Taking down shutters of any description exc 1 Sqm but n.exc 2 Sqm each leaf all as specified and as directed.

Taking down chowkhats or frames n.exc 1.5 Sqm each (without taking off shutters from frames) all as specified and as directed.

Dismantling of fencing wire mesh any type complete all as specified and as directed complete all as specified and as directed.

Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing) removing rubbish off the premises complete all as specified and as directed.

Dismantling stone slabs and tiles/ interlocking tiles etc of any description or thickness in floors, aprons etc laid bedded and pointed in any mortar all as specified and as directed

Taking down cement or cement lime plaster on brick/stone walls etc. including racking out joints hacking for key scrubbing down with water etc etc completed all as specified and as directed.

Taking up or down 15mm bore GI steel tubing and connections complete all as specified and as directed.

Taking up or down 20mm bore GI steel tubing and connections complete all as specified and as directed.

Dismantling of posts or struts (wood, steel or RCC) any section including taking out embedded in concrete, brick work in masonary portion and making good disturbed ground complete all as specified and as directed

Excavation in post holes, in any type of soil soil each not exceeding 0.5 Cum, getting out, returning, filling in and ramming earth or broken rubble mixed with earth around, in layers not exceeding 25 cm thick, watering and removing surplus soil to a distance not exceeding 50 M and making good surface complete all as specified and as directed.

Excavation in trenches, n exc 1.50m wide and n exc 1.50m in depth; for foundations, etc. or for manholes etc not exc 10 Sqm on plan and not exc 1.5m in depth and getting out in soft/loose soil all as specified and as directed.

Returning, filling in (soil), including spreading, leveling, watering and well ramming in layers not exc 25cm thick all as specified and as directed.

Removing excavated material (soil) n exc. 50m and depositing where directed at a level n exc. 1.5 m above the starting point all as specified and as directed.

M&L for PCC 1:3:6, type C2 (using 40 mm graded aggregate) as in foundations, filling and mass concrete complete all as specified and as directed.

M&L for brick work with sub class B bricks, old size, straight or curved on plan exc 6m mean redius built in cement mortar 1:6 complete all as specified and as directed.

S&F 35mm thick second class hardwood factory made plain, framed, panelled shutter (two panels) with lock rail and panel of 9mm thick B.W.P commercial ply or 12mm thick veneered particle board with commercial veneering on both faces; size of rail and stile as per IS: 1003 (Part-I), kiln seasoned and chemically pressure treated and fixed complete all as specified and as directed.

S&F 35mm thick second class hardwood factory made glazed and skeleton door shutters, open rebated and prepared to receive glass, gauze, etc (without sash bars), edges of framing plain, chamfered or rounded, fitted with cut and mitred beads for securing glass, etc complete all as specified & as directed.

S&F factory made PVC solid, single door frame (chowkats) of size 50 mm x 47 mm made out of 5 mm plain colour PVC sheet reinforced with mild steel square tube, supplying and fixing in opening all as specified in SSR part-II 2010 Section-8, clause 8B.3 complete all as specified and as directed.

S&F factory made solid PVC moulded door shutters, 28 to 30mm thick (stile:), with 2,4 or 6 raised panel design with 2mm thick 3D wood grain moulded PVC Sheet on the front face & 2mm plain colour PVC sheet on back face, supplying & fixing in frame at site as per specifications & drawing given in SSR complete all as specified and as directed.

S&F 100 mm size butt hinges, medium weight, cold rolled mild steel, and fixed all as specified and as directed.

S&F 75 mm size butt hinges, medium weight, cold rolled mild steel, and fixed all as specified and as directed.

S&F 200mm long aluminium andised barrel tower bolts of extruded section all as specified and as directed.

S&F 150mm long aluminium andised barrel tower bolts of extruded section all as specified and as directed.

S&F 150 mm size aluminium andised pressed handle, cast type complete all as specified and as directed.

S&F 125 mm size aluminium andised pressed handle, cast type complete all as specified and as directed.

S&F 250mm long aluminium sliding door bolts with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections complete all as specified and as directed.

S&F 300 mm long mild steel, ordinary rat tail rod pattern helical door spring including roller and roller plate complete all as specified and as directed.

S&F galvanised mild steel wire cloth, 0.56mm nominal dia of wire and average width of aperture 1.18mm complete all as specified and as directed.

S&F mild steel angle/flat iron as in fencing posts/struts for securing barbed/chain link fencing of any description including drilling holes, notching for wire etc.; flat iron fillets (for securing wire mesh etc.) including all necessary drilling, bolting or rivetting and similar work conforming to Fe-290 Gde E-165 complete all as specified and as directed.

S&F mild steel round bars conforming to Fe 410W (Gde E 250 ) quality or Fe 290 (Gde E 295) as in line bars for fixing chain link fencing complete all as specified and as directed.

S&F mild steel screw bolts, 10mm dia and 65mm long (machine made) with hexagonal or square heads at one end and screwed the other or screwed both ends, each screwed end to be fitted with washers and one hexagonal or square nut, complete all as specified and as directed.

Supply only mild steel galvanised chain link fencing of any gauge and any size, made out of GI wire, complete all as specified and directed. Note :- Dia and mesh size shall be as decided by GE and weight of chain link fencing shall be decided by BOO ordered by GE.

Fixing only chain link fencing wire mesh, any type including securing bolts etc. and fixed complete all as specified & as directed.

S&F in repairs, galvanized, 2 strand, steel barbed wire, 2.24 mm dia, barbed with 2 mm dia barbs, at 75 mm spacing and straining and fixing to any type of standard rails, straining bolts, including securing or tying at crossings with and provision of galvanized mild steel wire staples or steel pins etc complete all as specified and as directed.

S&F mild steel framed work confirming to Fe 290, Gde-165 as in doors or gates of angle or other section with gusset plates, rails, braces, etc., complete, drilled for fixing of steel sheeting or other covering. Doors, etc. to be prepared for hanging or sliding with and including either hooks and hinges or steel hanging door fittings (exclusive of steel sheeting or other covering, running rails and guides) and hanging; also fastening and fixing complete all as specified and as directed.

S&F powder coated aluminum windows, three track, made out of aluminium sections (make Jindal or equivalent) including all necessary fittings, 5.5mm thick itched glass, netlon wire mesh, rubber/ neoprene beading, locking arrangements including taking down existing windows complete all as specified and as directed, comprises of following sections :- (a) Window frame (i) Bottom-Section 20671 (Wt not less than 0.699 Kg/m) (ii) Top & Size - 20672 (Wt not less than 0.594 Kg/m) (b) Shutter (i) Vertical (end)- 20669 (Wt not less than 0.481 Kg/m) (ii) Vertical (lock) - 20689 (Wt not less than 0.481 Kg/m) (iii) Bottom - 20718 (Wt not less than 0.263 Kg/m) (iv) Top - 20668 (Wt not less than 0.377 Kg/m)

M&L for water proofing treatment to RCC roof slab, parapet, chajja etc comprising with the following treatment/specification from bottom to top including taking down/demolition existing decayed water proofing treatment with plaster/PCC padding of any thickness on roof:- (i) Taking out old bituminous felt roof treatment including plaster/PCC padding and roughening the old concrete slab by picking, sweeping clean and washing down with water to remove dust etc and disposal of rubbish n exceeding 500 mtr distance from starting point. (ii) 25mm thick(average) PCC type B-0,(1:2:4) using 12.5mm graded stone aggregate finished even & smooth without using extra cement mixed with WPC @ 3% by weight of cement. (iii) Cleaning of roof surface and applying one coat of cold bituminous primer @ 0.30 ltr /Sqm conforming to IS:3384-1986. (iv) APP based polymeric membrane 3mm thick (minimum), weighing 3.5 Kg/sqm reinforced with polyester non woven fabric (weighing not less than 150 gms/Sqm) shall be applied over bituminous primer as specified above by torch application. The overlaps shall be minimum 100mm on the transverse direction and 75mm on longitudinal direction. (v) Applying two coat of aluminium paint over the APP modified membrane @ 0.11Kg/sqm. Note: Water proofing compount will be measured & paid seperatly.

Supply only integral water proofing compound, ISI mark all as specified and as directed.

Special treatment to sunken portion with 10mm thick plaster in CM 1:4 with WPC liquid complast 421 and applying one coat each of Nittoproof 100 and Nittoproof 120 on plaster surface. Rendering again 10 mm thick plaster in CM 1:4 mixed with complast 421 in sunken portion of WC and CI pipe joints shall be filled / jointed with mixture of cement, fine sand and Nittoproof 130 and provide hole in the wall and fix 600 mm long 20 mm dia GI spouts light grade 1:3:6 filling, floor area of WC upto 3.00 Sqm each complete all as specified and directed. Note :- The rates including for drilling of the hole RCC @ 1.00 m centre to centre, to a depth to a length of 30 mm and fixing of PVC pipes of dia 15/20 mm laid dry and grouting with cement slurry mixed with can bax 100 chemical with pressure grouting with minimum 3 Kg/Sqm all as specified and as directed.

M&L for 75 mm thick PCC 1:4:8, type D2 (using 40 mm graded aggregate) as in sub-base complete all as specified and as directed.

M&L for 75mm thick PCC 1:3:6, type C2 (using 40mm graded stone aggregate) as in plinth protection, etc finished the surface even and smooth without using extra cement including provision of joint of size 10 mm wide & 10 mm deep and filling with bitumen mastic joint filling at every 3m length and at corners complete all as specified and as directed.

M&L for non skid ceramic coloured tile 7 to 8 mm thick area of each tile exc 0.18Sqm but n. exc 0.36 Sqm in floors etc over and including 15 mm thick screed bed or bedding layer of cement mortar 1:6, set & jointed in neat cement slurry and pointed in coloured cement to match complete all as specified and as directed.

M&L for glazed ceramic coloured (plain or printed) tiles of size 350x 250x 7 mm/ 450X 350X 7mm thick over 10 mm thick plaster in cement mortar 1:4 on vertical surfaces such as in skiting/dado complete all as specified and as directed.

M&L for light colour vitrified tiles, 10 mm thick (Square or rectangular), area of each tile exc 0.36 Sqm but n exc 0.42 sqm as in floors, laid over & including 15 mm thick screed bed in CM 1:6, set and jointed in neat cement slurry & pointed in white or coloured cement to match colour of tiles, complete all as specified and a directed.

All as per serial item No 46 above but in dado / skirting or on vertical surfaces, laid over and including 10 mm thick backing coat in cement mortar 1:4 .

M&L for granite of any type work (table rubbed and polishing) in steps, jambs, pillars, windowcill, cooking platform and like in CM(1:4) including pointing to white cement (1:2) using marble dust with admixture of pigment to match the shade of granite complete all as specified and as directed.

M&L for 60 mm thick precast cement concrete interlocking tiles (glossy finish/ rubber matt finish) hydraulically pressed cemented tiles of grey colour with pigments, (glossy finish/ rubber mat finish) factory made, M-35 grade as in floor laid over & including 25 mm thick sand cusion and including filling of interstices with fine sand complete all as specified and as directed. Note Size, shape & pattern of tiles shall be as appoved by GE.

M&L for precast cement concrete coloured chequered tiles with glossy finish of size 25cm x 25cm 25mm thick, machine pressed with grey cement and pigments set, jointed and pointed in neat cement slurry laid over & including 20mm thick screed bed in cement mortar 1:6 complete all as specified and as directed.

M&L for rendering 15mm thick in cement mortar 1:4 on fair faces (External serfaces) of brick work or concrete surfaces finished surfaces even and fair all as specified and as directed.

M&L for rendering 10mm thick in cement mortar 1:6 on other than fair faces (Internal surfaces) of brick work or concrete surfaces finished surfaces even and smooth without using extra cement all as specified and as directed.

M&L for preparing new plastered surface of walls and applying two coats of oil emulsion distemper over a coat of chalk whitining complete all as specified and as directed.

M&L for complete removal of existing treatment, preparation of surfaces of walls and applying one coat of primer over a coat of 1 mm thick (average) white cement putty, sanding the surfaces till smooth finish is obtained and finally applying two coats of oil emulsion distemper etc complete all specified and as directed

M&L for complete removal of existing treatment, preparation of surfaces of walls and applying two coats of cement base paint over a coat of alkali resistent primer complete all as specified and directed.

M&L for preparation of new plastered surfaces of walls applying two coats of cement base paint over a coat of primer all as specified and as directed

S&F 3mm thick sheet glass, ordinary quality and glazing with oil putty in square n exc 0.5 Sqm in each pane all as specified and as directed

S&F tinted glass 5.50mm thick as in glazing to aluminium door, windows, partitions etc including pad/gasket complete all as specified and as directed

M&L for preparing new surfaces of wood and wood based materials of any description exc 10cm width or girth and applying two coats of synthetic enamel paint over a coat of pink primer all as specified and as directed

M&L for preparation of new steel surfaces of any description over 10cm width or girth not otherwise described and applying two coats of synthetic enamel paint over one coat of red oxide primer all as specified and as directed

M&L for preparation of new steel surfaces of any description not exceeding 10cm width or girth not otherwise described and applying two coats of synthetic enamel paint over one coat of red oxide primer all as specified and as directed

S&F GI steel tubing, 15mm bore medium grade with and including all fittings and fixed to walls or laid in floors complete all as specified and as directed.

S&F GI steel tubing, 20mm bore medium grade with all fittings and fixed to walls or laid in floors complete all as specified and as directed.

S&F in repairs 15mm bore wall mixer, brass Chromium plated for mixing hot & cold water screwed down for iron pipe and fixed complete all as specified and as direcetd.

S&F in repairs 15mm bore bib taps fancy type, Chromium plated, cast copper alloy with crutch or butter handle, screwed down screwed for iron pipe or for brass ferrule and fixed complete all as specified and as directed.

S&F in repairs stop valves, fancy type 15 mm bore, chromium plated cast copper alloy, screwed both ends for iron pipe and fixed complete all as specified and as directed.

S&F in repairs 15mm bore pillar taps, cast copper alloy with capstan heads, Chromium plated, screwed down high pressure, with or without lettered `Hot' or Cold with long screwed shanks and fly nuts, screwed for iron pipe and fixed complete all as specified and as directed.

S&F in repairs brass chromium plated swivel shower rose 125mm size, including shower arm, fixed to steel pipe and union complete all as specified and as directed.

S&F in repair 32 mm bore low density polythene pipe (LDPE) of pressurerating 6Kgf/Sqcm fixed to wall or laid in floors etc including all fittings and fixed complete all as specified and as directed.

S&F in repair grating doom 125mm dia with waste hole of PTMT (Minimum weight 40gms) complete all as specified and as directed.

S&F in repairs vitreous China wash hand basin, white 580 x 450 mm size flat back incl cutting for and pinning in ends of brackets, waste coupling and waste & vent pipe fixing includin 32mm bore chromium plated waste coupling with rubber washers etc complete all as specified and as directed.

S&F in repairs vitreous china wash down water closet pan (padestal pattern) any colour P or S trap with and including white or coloured plastic seat cover with mild steel chromium plated hinging device including all connections and fixed complete all as specified and as directed.

S&F in repairs PVC low level flushing cistern, 10Ltrs capacity including ball valve, bracket inlet, PVC pipe, PVC connection 600 mm long etc.complete all as specified and directed.

S&F in repairs PVC connection 15mm size with PTMT nuts of length 450mm fixed complete all as specified and as directed.

S&F in repairs, health faucet, premium quality with one meter stainless steel tube, hook & hand faucet including connected accessories complete all as specified as directed.

S&F in repairs sheet glass shelf assembly with 8mm thick toughned glass 12cm wide including chromium plated bracket guard and railing with all fittings complete all as specified and as directed.

S&F in repairs wall corner sheet glass shelf assembly size 12"x12" with 8mm thick toughned glass with all fittings complete all as specified and as directed.

S&F rotational moulded polytethne storage tanks of 1000 ltrs capacity. (cylinderical vertical with closed top) hoisted and fixed in position including dismantling old tank complete all as specified and as directed

S&F in repairs ball valves high pressure of 20mm bore of pipe, PTMT with epoxy coated aluminium rod & high density plastic ball screwed for iron pipe and fixed, (minimum weight for 20mm - 210gm) complete all as specified and as directed.

S&F in repairs tubular towel rail, 20mm dia, D type, 60cm long between flanges, brass Chromium plated fixed with and including Chromium plated brass screws and wooden/plastic cleats complete all as specified and as directed.

S&F in repairs, 75 mm bore, PVC (SWR) pipes, single socketed, in any length with rubber ring joints, laid in trenches or in floors all as specified and as directed.

S&F in repairs, 110 mm bore, PVC (SWR) pipes, single socketed, in any length with rubber ring joints, laid in trenches or in floors all as specified and as directed.

S&F in repairs, 75 mm dia PVC (SWR) bends with access door, of any radius complete all as specified and as directed

S&F in repairs, 110 mm dia PVC (SWR) bends with access door, of any radius complete all as specified and as directed

S&F in repairs, 75 mm dia PVC (SWR) nahani/floor trap with grtaing including jointing to waste pipe with solvent cement, complete all as specified and as directed.

Taking down carefully copper/Aluminum point wiring (Light, Fan, Socket or power) complete fitting such as switches, ceiling, regulator, sockets etc removing materials to be store for keeping in safe custody for taking credit and making good disturbed surfaces of walls, floors etc all as specified and as directed.

M&L for point wiring (Light Point/fan Point) complete with and including single core FRLS PVC insulated unsheathed flexible bright annealed multi stranded copper conductor cables 1.5 Sq mm (22/0.30 mm) 1100 volts grade drawn through and including heavy grade PVC rigid conduits 20 mm or higher dia as required at site, totally surface/concealed in walls/floors/ceiling including all conduit accessories/fittings / junction boxes/inspection covers etc; of heavy grade, ISI marked with and including factory made terminal boxes with cover plates suitable for modular type switches, sockets, fan regulators etc including 1.5 Sq mm (22/0.30 mm) 1100 V grade FRLS PVC insulated, unsheathed flexible multi stranded copper conductor cable as continuous earth wire connected to metallic bodies of luminaries / fans etc; at one end and to common earth dolly at other end, complete all as specified and as directed.

All as per serial item No 88 but for Bell point, with cables 1.5 sqmm complete all as specified and as directed

All as per serial item No 88 but for 5 Amps socket in same board with 1.5 sq mm cable complete all as specified and as directed

All as per serial item No 88 but for 5 Amps socket in independent board with 1.5 Sqmm cable complete all as specified and as directed

All as per serial item No 88 but with 2.5 Sqmm cables for one 15A, 6-pin socket outlet point on independent board with & including 2.5 Sqmm FRLS cable as earth wire complete all as specified and as directed

All as per serial item No 88 but for 2 way switches with 1.5 Sqmm cable controlled by two switches complete all as specified and as directed

S&F modular switch single pole one way 6/10 Amps 1 module complete all as specified and as directed

S&F modular switch single pole one way 16 Amps 1 module complete all as specified and as directed

S&F of modular socket 6 amp-2/3 pin combined 2 module complete all as specified and as directed.

S&F modular socket 6 A/16 amp -2/3 pin combined 2 module complete all as specified and as directed.

S&F modular Switch 2 way 1 module complete all as specified and directed.

S&F modular fan regulator step type,120W -2 module complete all as specified & as directed

S&F LED lights fitting 1x18W, 220V, AC decorative box type with driver, holder including LED tube light connecting up with three core flexible copper conductor cable of suitable size from ceiling rose complete all as specified and as directed.

S&F LED lights fitting 1x10W, 220V, AC decorative box type with driver, holder including LED tube light connecting up with three core flexible copper conductor cable of suitable size from ceiling rose complete all as specified and as directed.

S&F lamp holder, PVC/Polycarbonate type with back plate suitable for batten/pendant fitttings complete all as specefied and as directed

S&F lamp LED 9/10 Watt, 230 volts 50 Hz AC complete all as specified and as directed all as specified and as directed.

S&F LED light fitting 1x9W/1X10W bulkhead luminaires including LED light driver holder connecting up with three core flexible copper conductor cable of suitable size all as specified and as directed.

S&F ceiling rose surface bakelite three terminal type complete all as specified and as directed

S&F electrical bell (multi music type), AC, 230 Volts complete all as specified and as directed

S&F electrical bell push modular type 6 Amp complete all as specified and as directed

S&F in replacement of old unserviceable MCB DB double door 12 way SPN with suitable rated busbar 240 V complete all as specified and as directed.

S&F in replacement of old unserviceable MCB DB double door 4 way TPN with suitable rated busbar 415 V complete all as specified and as directed.

S&F MCB single pole 240 volts 6 to 32 Amps "C" complete all as specified and as directed

S&F MCB SPN 240 Volts 40 to 63 Amps "C" Curve complete all as specified and as directed

S&F MCB TPN 415 Volts 63-100 Amps "C" Curve complete all as specified and as directed

M&L for sub main wiring with 2 runs of 4 sqmm, single core, PVC insulated & unsheathed cable, conforming to IS-694, 1100 volts with copper conductor, multi stranded, drawn in and including suitable size casing / caping (ISI marked) with all accessories such as Tees, Elbows, junction box etc as requied alongwith one run of 2.5 sqmm single core PVC insulated & unsheathed copper conductor as continuous earth wire dolly and connecting to existing main switch board / distribution board of each building / qtr as ordered and testing on completion including taking down old submain wiring and any type of casing/caping, complete all as specified and as directed. Note : Two runs of 4 Sqmm cable, one run of 2.5 Sqmm cable and one run of PVC casing/caping will be measured as one Rm unit.

M&L for sub main wiring with 2 runs of 2.5 Sqmm, single core, PVC insulated & unsheathed cable, conforming to IS-694, 1100 volts with copper conductor, multi stranded, drawn in and including suitable size casing / caping (ISI marked) with all accessories such as Tees, Elbows, junction box etc as requied alongwith one run of 2.5 Sqmm single core PVC insulated & unsheathed copper conductor as continuous earth wire dolly and connecting to existing main switch board / distribution board of each building / qtr as ordered and testing on completion including taking down old submain wiring and any type of casing/caping, complete all as specified and as directed. Note : Two runs of 2.5 Sqmm cable, one run of 2.5 Sqmm cable and one run of PVC casing/caping will be measured as one Rm unit.

S&F in replacement single pole and neutral enclosure with a two pin and earth plug and socket complete with one single pole MCB of capacity 20 Amp 240 Volts complete all as specified and as directed

S&F 35/40 Watt building mounted LED Security light fitting complete made up of pressure die cast housing with toughned glass and individual high power LEDs with secondary optics, IP66 protection and impact resistance of IK07 & 10KV external SPD, including GI bracket made out of GI pipe 40/50 mm bore, medium grade pipe 1.2 m long bend to shape required fixed to pole / wall with 02 Nos MS clamps made out of flat iron 40 x 5 mm including nuts, bolts and washer, painting with two coats aluminium paint over a coat of primer, suitable for LED fitting, complete all as specified and as directed

Supply, laying and testing cable XLPE Insulated , screened, PVC bedded, galvanized steel strip or wire armoured, electric power cables (heavy duty) 1100 Volts grade with stranded aluminium conductor of size 50 sq mm 3.5 core including dismantling and taking out old underground cable, cable cover etc complete all as specified and as directed.

Supply and spreading sand for cusioning for electric cable 8 cm below the cable and 15 Cm above the cable, including hand punning complete all as specified and as directed. Note : Punned thickness will be mesured and paid.

Supply and laying reinforced factory made precast concrete cable protection cover class LV type-2 flat size 250 mm x 150 mm x 40 mm, ISI marked complete all as specified and as directed.

S&F in repairs, GI tubing light grade of 40 mm dia for cable protection on pole/wall/floor/ or in trenches and drain etc complete with necessary clamp, nut, bolts and washers and socket and making good the disturbed surface of wall, floor or roof etc all as specified and as directed

M&L in replacement earthing complete with galvanized steel earth plate electrode 60 cm X 60 cm X 6 mm thick, buried directly in ground (earth pit not less than 2.25 mtr deep below normal ground level) with top edge of plate not less than 1.5 mtr below ground level, connecting to the GI wire 4 mm dia , by means of nut bolts, check nuts and washer of the GI . Earth wire connected upto main earth point/DBs alongwith 15mm dia GI pipe, medium grade, including provision of concrete pit in PCC (1:2:4) type B-1 using 20 mm graded stone aggregates with 40 mm thick RCC (1:2:4) cover with reinforced with XPM (weight not less than 4 Kg / Sqm) and frame of angle iron 25mm X 25 mm X 3mm with lugs 2 Nos and with 6 mm dia MS bar handle made to shape, GI light grade 20 mm bore pipe for watering perforated at bottom 1.75 mtr long placed on top edge of earth plate, common salt and charcoal filling, test point made out of Phosphorus Bronze with fixing arrangement, funnel, wire mesh and earth work in hard/dense soil, returning filling in and removal of surplus soil to a distance not exceeding than 50 mtr, all as per electric plate No 3 of SSR Part I 2009 and connection to earth test point all as specified and directed including testing on completion.

sonu enterprises

M/s S.R lahoti

M/S Tirupati Goroba Shendge

M/s IBEX Engineers and Contractors

M/s.M G Kulkarni

M/S. M.A. Sharief engineers and contractors