REPAIR/MAINT OF MAIN PUMPING RAW WATER PIPE LINE AND ALLIED WORKS UNDER GE NASIK ROAD.

Amount

Taking up cast iron/DI pipe of 300 mm dia incl fitting with spigot & socket ends of following dia all as directed at site.

Supply and laying Ductile iron pipes K-9 (tyton joint ) with spigot and socket ends centrifugally cast in any length laid in trenches of size 300 mm dia

Dismantling existing unserviceable non-returning valves of 300mm bore both end flanged including unscrewing of nut & bolts and removal of insertion sheet.

Supply and fix non return valve flanged of class 1.6 PN ,300 mm (12”)dia.

Dismantling existing unserviceable sluice valve of 300mm bore both end flanged including unscrewing of nut & bolts and removal of insertion sheet.

Supply and fix Valves, Sluice, flanged of class 1.6 PN ,300 mm (12”)dia.

Dismantling existing unserviceable air release valve of 80mm bore both end flanged including unscrewing of nut & bolts and removal of insertion sheet.

Supply and fix cast Iron Air Valves with two air Outlets, 80 mm dia bore and fixing Up in CI/DI water supply mains ,300 mm (12”)dia.

M & L for CI fitting such as bends (any type radius and angle ) tapers any type ( straight, bend, Tee, reducers, socket , collers,caps and plugs ) upto 300mm dia

Dismantling of brick work masonry

Demolition of reinforced cement concrete of any description and in any position not otherwise specifically provided for (reinforcement cut as required to facilitate demolition)

Demolition of cement concrete of any description and in any position not otherwise specifically provided for.

M & L for cement in foundation filling mass & concrete type D2 (1:4:8) (using 40 mm graded stone aggregate)

M & L for reinforced concrete pipes of 300MM dia, class NP2, laid and jointed complete with collars

Material and labour for providing cement concrete in in lintels upto 1.5m clear span, cills, steps; seismic and other similar bands, plinth courses, string courses, lacing courses, parapets and railings upto 60 cm in height, copings, kneelers, apex stones, bed plates, kerbs not provided for in Item 04028, water troughs and the like including weathering, slightly rounded or chamfered angles and throating, as directed roof kerbs or mud stops ,rounded or chamfered on edges type B1 (1:2:4)(using 20 mm graded stone aggregate.

M & L for Brickwork with fly ash bricks straight or curved on plan exc 6 m mean radius laid in CM 1:6 complete all as specified and directed by Engr-in-Charge.

Taking down plastering on lathing (other than wire-netting), without removing lathing, in lime mortar (one side only measured in cases where both sides are plastered) in cement lime or cement mortar

M & L for 15 mm thick rendering in cm (1:4) on fair faces of brick works or concrete surfaces finished even and smooth (without using extra lime or cement).

Formwork to sides of concrete foundations, footings, bases of columns, raft and raft beams, sides and soffits (if any) of foundation and plinth beams; and similar work; vertical or to batter in rough finished and flat surfaces of concrete

Formwork to fare finished square/rectagular/polygonal surfaces of conrete sides of pillars, posts, struts, piers, columns and stanchions

S&F TMT bars 10mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips

Ditto all as per item No-16 here in before , but 6 mm to 8 mm dia.

M&L for reinforced cement concrete (nominal mix) 1:2:4, type B1 (20mm graded aggregate) in Foundations, including rafts, footings, foundation beams; plinth beams; bases for columns, etc.; basement slabs, under-reamed piles and mass concrete

M&L for reinforced cement concrete (nominal mix) 1:2:4, type B1 (20mm graded aggregate) in Columns, pillars, piers, posts and struts

Dismantling wrought iron or mild steel work of any description not otherwise provided for

S&F Rolled mild steel in Fe-410-W(Gde-E-250) quality-B as in main and cross beams, hip and jack rafters; purlins where connected to common rafters and running rails and guides for sliding doors; fixed with angle cleats or other connecting plates

M&L for painting steel and iron surfaces of any description in two coats of synthetic enamel (ordinary tint ) over priming coat of red oxide including preparation of new or previously untreated surfaces of steel over 10cm in width or girth,not otherwise described

NOTE :- AMOUNT OF SCHEDULE OF CREDIT RS. 35100.00 WILL BE DEDUCTED FROM TOTAL AMOUNT OF BOQ.

Abhiraj Enterprises

sapana enterprises

P C DAVE AND SONS

MANOVANDANA CONSTRUCTION

UNITED ENTERPRISES

Bidder Name

sapana enterprises

MAHIMA CONSTRUCTION

UNITED ENTERPRISES

P C DAVE AND SONS

Abhiraj Enterprises

MANOVANDANA CONSTRUCTION