General Fund 2023-2024

Amount

Supply and delivery of following pipe line materials (with ISI mark) etc., complete 32mm GM Non Return valve

32mm dia G.I bend with coupler

32mm dia G.I Union

32mm G.M. Gate valve

20mm G.I Coupling

20mm CICP Tap

32mm HDPE hose

25mm PVC pipe

32mm HDPE hose clip

1000 litre HDPE water tank ISI mark

HDPE pipe (75mm)

Earth work excavation for foundation and depositing on bank with in the initial lead of 10m and a lift of 2m in hard stiff clay, stiff block cotton, hard red earth, shales, murram, gravel, stoney earth and earth mixed with small size boulders etc.,as per std specification

Plain Cement Concrete 1:4:8 Mix (one Part of cement, four Part of M- Sand and Eight Part of aggrigate) using 40 mm size ISS HBG metal from approved quarry including cost and conveyance of all materials to site. Loading and unloading charges and labour charges for mixing. Laying and curing etc., complete as per TNDSS NO : 28 & VI (S2) VI (S5A) VII standard specifications as directed by Engineer incharge.

Brick Work in Cement Mortar 1:5 Mix (one cement, five sand) using 2nd Class country brick of size ( 9” x 4 1/2” x3") including curing finishing and cost and conveyance of all materials and labour charge etc., complete as per std specification

Plastering in C.M. 1:5 (one cement five sand) to 12 mm thick including all cost and conveyance of all materials and labour charge etc., complete as per std specification

Cement paint two coats of approved colour and quality including preparation of plastering wall surface, finishing neatly and all other labour, materials cost etc., complete as per std specification

Lowering HDPE pipes and specials to trench and laying to proper grade and alignment and as directed by the TWAD officers

Refilling the foundation with excavated earth including consolidation as directed by the TWAD Board officers

Supply and delivery of wet type 20 x 150 LPM 2.0 HP submersible pumpset with motor and confirming to IS 8034/89 and IS 9283/79 with ISI marking wth DOL pannel board as per standard

Supply and delivery of wet type 50 x 150 LPM 7.5 HP submersible pumpset with motor and confirming to IS 8034/89 and IS 9283/79 with ISI marking wth DOL pannel board as per standard

Three phase panel board, DOL with Two level Guard, and Auto start supply and delivery of direct online starter confirming to ISI 3947, IEC 60947-1 and as ameded thereafter with suitable KW rating

Single phase panel board with Two level Guard, and Auto start supply and delivery of direct online starter confirming to ISI 3947, IEC 60947-1 and as ameded thereafter with suitable KW rating

Supply and delivery of 2.5 sq mm flat type PVC insulated 2 core copper cable confirming to OS694/1990 with ISI marking suitable for submersible pump set etc complete

Labour charge for the erection of submersible pump set in borewell including fixing and joint submersible cable with proper clamps upto stater to require depth and also fixing of raiser pipes to the required depth valve erection clamp pressure gauges upto the exterior wall of pump room

Supply and delivery of MS Kiosk of size 0.75m x0.45mx0.75m made up of MS angle of size 50mm x 50mm x 4mm alround covered with 16 gauge MS sheet

Writing Name board with schemes details

D.V.BHOOPATHI NAIDU