GE/BAS-74/22-23 REPAIR AND POLISHING OF ALL TYPES OF WOODEN FURNITURE FOR MADHOPUR MIL STATION AT BSO YARD UNDER GE BASOLI

Amount

REPAIR TO TABLE 3’ X 2’ (WITH / WITHOUT DRAWER) (FD-42,283 & all) (For srl item No 1 to 4) Material and labour for replacement of table top with 18/19mm thick Pre-laminated Particle board (exterior grade) one side teak face, ISI Marked, including 4mm thick half round teak wood beading shall be provided al-round the top of table as shown on drawing complete all as specified and directed by the Engineer-in-Charge .

Supply and fixing new leg of required size made out of well seasoned 1st class teak wood as shown on drawing complete all as specified and directed by the Engineer-in-Charge .

Supply and fixing new front /side rail of required size made out of well seasoned 1st class teak wood as shown on drawing complete all as specified and directed by the Engineer-in-Charge .

Material and labour for replacement of drawer with fancy knob as shown on drawing complete all as specified and directed by the Engineer-in-Charge .

REPAIRS TO CHAIR EASY (FD-201 and FD-229):- For Srl No 5 to 9) Material and labour for replacement of damaged front/rear legs of Chair easy with well seasoned 1st class Teakwood as shown on drawing complete all as specified and directed by the Engineer-in-Charge .

Material and labour for replacement of damaged arm-rest of Chair easy with well seasoned 1st class Teakwood as shown on drawing complete all as specified and directed by the Engineer-in-Charge .

Material and labour for replacement of damaged fillet for canning of seat and back of Chair easy with well seasoned 1st class Teakwood as shown on drawing complete all as specified and directed by the Engineer-in-Charge .

Material and labour for preparation of surfaces by removing of old existing fade out polish from Chair wooden furniture by scrapping or with caustic soda and rubbed down by emery paper including filled up the cracks and pores with a paste of putty and applying two coats of French polish of approved quality with high gloss finish on exposed surfaces as shown on drawing complete all as specified and directed by Engr-In-Charge.

Material and labour for removing old plastic cane from Chair and recanning with 2MM new plastic cane good quality as directed Boarder of chair shall be canning with 3 MM as shown on drawing complete all as specified and directed by the Engineer-in-Charge.

REPAIR TO CHAIR DINING CUSHIONED (FD/MAP-II/04) (For Srl item No 10 to 16) Material and labour for replacement of damaged front leg of chair dining with well seasoned 1st class teak wood as shown on drawing complete all as specified and directed by the Engineer-in-Charge .

Material and labour for replacement of damaged rear leg of chair dining with well seasoned 1st class teak wood as shown on drawing complete all as specified and directed by the Engineer-in-Charge .

Material and labour for replacement of damaged back rest of chair dining with well seasoned 1st class teak wood as shown on drawing complete all as specified and directed by the Engineer-in-Charge .

Material and labour for replacement of damaged side/front/back rail of chair dining with well seasoned 1st class teak wood as shown on drawing complete all as specified and directed by the Engineer-in-Charge .

Material and labour for preparation of surfaces by removing of old existing fade out polish from Chair wooden furniture by scrapping or with caustic soda and rubbed down by emery paper including filled up the cracks and pores with a paste of putty and applying two coats of French polish of approved quality with high gloss finish on exposed surfaces as shown on drawing complete all as specified and directed by Engr-In-Charge.

Material and labour for removing old cushioned seat from Chair dinning and S&F new cushioned seat and ply wood of approved quality with tapestry cloth for chair dinning as directed & as shown on drawing complete all as specified and directed by the Engineer-in-Charge.

REPAIR TO CHAIR DINING (FD-279 and FD-270,228) (For Srl item No 10 to 22) Material and labour for replacement of damaged front leg of chair dining with well seasoned 1st class teak wood as shown on drawing complete all as specified and directed by the Engineer-in-Charge .

Material and labour for replacement of damaged rear leg of chair dining with well seasoned 1st class teak wood as shown on drawing complete all as specified and directed by the Engineer-in-Charge .

Material and labour for replacement of damaged back rest of chair dining with well seasoned 1st class teak wood as shown on drawing complete all as specified and directed by the Engineer-in-Charge .

Material and labour for replacement of damaged stiffener of chair dining with well seasoned 1st class teak wood as shown on drawing complete all as specified and directed by the Engineer-in-Charge .

Material and labour for replacement of damaged side/front/back rail of chair dining with well seasoned 1st class teak wood as shown on drawing complete all as specified and directed by the Engineer-in-Charge .

Material and labour for preparation of surfaces by removing of old existing fade out polish from Chair wooden furniture by scrapping or with caustic soda and rubbed down by emery paper including filled up the cracks and pores with a paste of putty and applying two coats of French polish of approved quality with high gloss finish on exposed surfaces as shown on drawing complete all as specified and directed by Engr-In-Charge.

Material and labour for removing old plastic cane from Chair and recanning with 2MM new plastic cane good quality as directed Boarder of chair shall be canning with 3 MM as shown on drawing complete all as specified and directed by the Engineer-in-Charge.

REPAIR TO CHAIR WRITING CUSHION (FD - 1107) (For Srl item No 23 to 927) Material and labour for replacement of damaged front legs of Chair writing made out of well seasoned 1st class Teak wood as shown on drawing complete all as specified and directed by the Engineer-in-Charge .

Material and labour for replacement of damaged rear legs of Chair writing made out of well seasoned 1st class Teak wood as shown on drawing complete all as specified and directed by the Engineer-in-Charge .

Material and labour for removal of old damaged back seat of Chair writing cushion and S&F new Back rest with leatherite cloth cover over rubberised foam of approved quality complete all as shown on drawing or as specified and directed by the Engineer-in-Charge

Material and labour for removal of old damaged seat of Chair writing cushion and S&F new seat with leatherite cloth cover over rubberised foam of approved quality complete all as shown on drawing or as specified and directed by the Engineer-in-Charge

Material and labour for preparation of surfaces by removing of old existing fade out polish from Chair wooden furniture by scrapping or with caustic soda and rubbed down by emery paper including filled up the cracks and pores with a paste of putty and applying two coats of French polish of approved quality with high gloss finish on exposed surfaces as shown on drawing complete all as specified and directed by Engr-In-Charge.

REPAIR TO TABLE WRITING (FD – 33,249,275) (for item No 28 to 33 ) Material and labour for replacement of table top with 18/19mm thick Pre-laminated Particle board (exterior grade) one side teak face, ISI Marked, incl 4mm thick half round teak wood beading shall be provided al-round the top of table as shown on drawing complete all as specified and directed by the Engineer-in-Charge .

Supply and fixing new leg of required size made out of well seasoned 1st class teak wood as shown on drawing complete all as specified and directed by the Engineer-in-Charge .

Supply and fixing new stiffener of required size made out of well seasoned 1st class teak wood as shown on drawing complete all as specified and directed by the Engineer-in-Charge

Material and labour for replacement of old drawer and S&F new drawer with fancy knob as shown on drawing complete all as specified and directed by the Engineer-in-Charge .

Material and labour for replacement of box completely with 18/19mm thick pre laminated particle board one side teak faced (exterior grade) with 4mm thick teak wood edging all round including Knob and lock as shown on drawing complete all as specified and directed by the Engineer-in-Charge .

Material and labour for preparation of surfaces by removing of old existing fade out polish from Chair wooden furniture by scrapping or with caustic soda and rubbed down by emery paper including filled up the cracks and pores with a paste of putty and applying two coats of French polish of approved quality with high gloss finish on exposed surfaces as shown on drawing complete all as specified and directed by Engr-In-Charge.

REPAIR TO TABLE CENTRE (FD-274 & 235):- (for Srl item No 34 to 38) Material and labour for replacement of table top with 18/19mm thick Pre-laminated Particle board (exterior grade) one side teak face, ISI Marked, incl 4mmthick half round teak wood beading shall be provided al-round the top of table as shown on drawing complete all as specified and directed by the Engineer-in-Charge .

Supply and fixing new leg of required size made out of well seasoned 1st class teak wood as shown on drawing complete all as specified and directed by the Engineer-in-Charge .

Material and labour for replacement of damaged front/side rail of table with well seasoned 1st class Teakwood as shown on drawing complete all as specified and directed by the Engineer-in-Charge .

Material and labour for replacement of damaged stiffners of table with well seasoned 1st class Teakwood as shown on drawing complete all as specified and directed by the Engineer-in-Charge .

Material and labour for preparation of surfaces by removing of old existing fade out polish from Chair wooden furniture by scrapping or with caustic soda and rubbed down by emery paper including filled up the cracks and pores with a paste of putty and applying two coats of French polish of approved quality with high gloss finish on exposed surfaces as shown on drawing complete all as specified and directed by Engr-In-Charge.

REPAIR TO TEA POY (FD-232 and FD-278) (for srl item No 39 to 41 ) Material and labour for replacement of table top with 18/19mm thick Pre-laminated Particle board (exterior grade) one side teak face, ISI Marked, incl 4mm thick half round teak wood beading shall be provided al-round the top of table as shown on drawing complete all as specified and directed by the Engineer-in-Charge .

Supply and fixing new leg of required size made out of well seasoned 1st class teak wood as shown on drawing complete all as specified and directed by the Engineer-in-Charge .

Supply and fixing new stiffener of required size made out of well seasoned 1st class teak wood as shown on drawing complete all as specified and directed by the Engineer-in-Charge .

REPAIR TO BED PLYWOOD TOP (FD-213,246 & all) (For srl item No 42 to 45) Material and labour for replacement of top of bed ply wood with 12 mm thick commercial plywood, BWR grade, ISI marked of make Kit ply/century ply/green ply fixed on the top of bed plywood with screws as shown on drawing complete all as specified and directed by the Engineer-in-Charge .

Material and labour for replacement of head board with legs completely for bed with new of required size made out of well seasoned 1st class Teak wood as shown on drawing complete all as specified and directed by the Engineer-in-Charge .

Material and labour for replacement of unserviceable foot boardwith legs of bed ply wood top as shown on drawing complete all as specified and directed by the Engineer-in-Charge .

Material and labour for replacement of damaged long rail of bed with well seasoned 1st class Teakwood as shown on drawing complete all as specified and directed by the Engineer-in-Charge .

Repair & recanning of chair verandah(FD-259, FD-256) Material and labour for replacement of unserviceable plastic cane from chair verandah and recanning of the existing with 4MM vide 1/2 Rd plastic cane good quality in Mat pattern including painting with two coat of synthetic enamal paint white before canning and 04 Nos PVC rubber shoes to the legs as shown on drawing complete all as specified and directed by the Engineer-in-Charge.

REPAIR TO TABLE DINING FOR 6 PERSONS (FD-239 and FD-1115) (for srl item No 47 to 50 ) Material and labour for replacement of table top for table dining 06 persons 18/19mm thick Pre-laminated Particle board (exterior grade) one side teak face, ISI Marked, including 4mm thick half round teak wood beading shall be provided al-round the top of table as shown on drawing complete all as specified and directed by the Engineer-in-Charge

Material and labour for replacement of damaged long rail of table dining 6 persons with well seasoned 1st class Teakwood as shown on drawing complete all as specified and directed by the Engineer-in-Charge .

Material and labour for replacement of damaged leg of table dining 6 persons with well seasoned 1st class Teakwood as shown on drawing complete all as specified and directed by the Engineer-in-Charge

Material and labour for replacement of damaged short rail of table dining 6 persons with well seasoned 1st class Teakwood as shown on drawing complete all as specified and directed by the Engineer-in-Charge .

REPAIR TO TABLE DINING 120x90)(FD/MAP-II/03 ) (for srl item No 51 to 55 ) Material and labour for replacement of table top for table dining 18/19mm thick Pre-laminated Particle board (exterior grade) one side teak face, ISI Marked, including 4mm thick half round teak wood beading shall be provided al-round the top of table as shown on drawing complete all as specified and directed by the Engineer-in-Charge

Material and labour for replacement of damaged long rail of table dining with well seasoned 1st class Teakwood as shown on drawing complete all as specified and directed by the Engineer-in-Charge .

Material and labour for replacement of damaged leg of table dining with well seasoned 1st class Teakwood as shown on drawing complete all as specified and directed by the Engineer-in-Charge

Material and labour for replacement of damaged short rail of table dining with well seasoned 1st class Teakwood as shown on drawing complete all as specified and directed by the Engineer-in-Charge .

Material and labour for preparation of surfaces by removing of old existing fade out polish from table wooden furniture by scrapping or with caustic soda and rubbed down by emery paper including filled up the cracks and pores with a paste of putty and applying two coats of French polish of approved quality with high gloss finish on exposed surfaces as shown on drawing complete all as specified and directed by Engr-In-Charge.

TABLE DRESSING LADIES FD-32,FD-251 & 378 :- (For Srl Item No 56 to 59)Material and labour for repair of Box Table Dressing Ladies of size 1200mm x 600mm made out of 18mm thick PPB exterior grade melamine faced. ISI marked with and including aluminium channel 12mm x 22mm all round complete.

Material and labour for Frame of size 1200mm x 365mm made of Sheesham wood, with & including back of 6mm thick ply wood ISI Marked commercial for looking mirror complete. all as shown on drawing and specified .

Material and labour for preparation of surfaces by removing of old existing fade out polish from wooden furniture by scrapping or with caustic soda and rubbed down by emery paper including filled up the cracks and pores with a paste of putty and applying two coats of French polish of approved quality with high gloss finish on exposed surfaces as shown on drawing complete all as specified and directed by Engr-In-Charge.

KHAJURIA BUILDERS