REPAIR TO PLASTER, FLORING AND MISC B/R REPAIRS IN CERTAIN MD ACCN IN MES COLONY AT AF STN TUGHLAKABAD UNDER GE (AF) TUGHLAKABAD

Amount

Taking down cement plaster including raking out joint hacking for key scrubbing down with water etc complete all as specified and directed by Engineer-in-charge. Note:- Quoted rate shall be deemed to be included for work up to 15 mtr height including scoffolding

M&L for 15mm thick rendering in CM (1:4) on concrete or masonry surfaces mixed with water proofing compound @ 3% by weight of cement, surfaces to be finished even & smooth without using extra cement including taking down the cement plaster on brick or stone walls etc. complete all as specified and directed by Engineer-in-charge. Note - (i) WPC shall be measured and paid separately (ii)Quoted rate shall be deemed to be included for work up to 15 mtr height including scoffolding

Supply only integral water proofing compound ISI Marked complete all as specified and directed by Engineer-in-charge.

M&L for rendering 10mm thick in cement mortar (1:6) to brick or concrete wall surfaces finished even & smooth without using extra cement including taking down the cement plaster on brick or stone walls etc. complete all as specified and directed by Engineer-in-charge. Note:- Quoted rate shall be deemed to be included for work up to 15 mtr height including scoffolding

M&L 5mm thick rendering in CM 1:3 on concrete surface as in ceiling finished even and smooth w/o using extra complete including taking down loose cement plaster on brick, stone walls and concrete surfacescomplete all as specified and directed by Engr-In-Charge Note:- Quoted rate shall be deemed to be included for work up to 15 mtr height including scoffolding

M&L Preparing new plaster surface of wall of any description and apply two coats of exterior weathercproof water base emulsion paint in white or tinted paint over a coat of primer complete all as specified and as directed. Note:- Quoted rate shall be deemed to be included for work up to 15 mtr height including scoffolding

M&L Preparing old plaster surface of wall of any description and apply two coats of exterior weathercproof water base emulsion paint in white or tinted paint complete all as specified and as directed. Note:- Quoted rate shall be deemed to be included for work up to 15 mtr height including scoffolding

M&L for Preparing new surfaces of walls applying two coat of Oil Bound Distemper over a priming coat including providing putty of 1 mm thickness over plastered surfaces to prepare surface even and smooth complete all as specified and directed.

M & L for preparation of old plastered surfaces of walls and applying two coat of Oil Bound distemper of approved tint, ncluding providing putty of 1 mm thickness over plastered surfaces to prepare surface even and smooth complete all as specified and directed.

M&L preparation of New surfaces of ceilling and applying three coat of white wash on it complete all as specified and directed.

M&L preparation of Old surfaces of ceilling and applying two coat of white wash on it complete all as specified and directed.

M&L for gunniting to RCC works in column beams, slabs, chajja, facia, landing, balconies etc by removing/ dismantling of RCC (loose concrete) and cutting of steel bar including plaster cleaning of surfaces with wire brushes and applying epoxy, paint anti corrosive coating of minimum 40-50 microns thick with sikatop Armatec 108 or Colusal VL of MC Bauchemie to rusted steel reinforcement after removing cleaning all rust and supply and fixing welded steel wire mesh 75mm x75mm with 4mm dia steel wire as facies/drops and similar works etc and expoxy based or other equivalent suitable bonding against treatment to be carried out on old concrete surface with Sikadur 32 of Sikka. Nito bond EP of fosroc or equivalent (as per manufacturers instruction) to bond old and new concrete mixing @ 2% by weight of cement polycrete and providing gunniting with a minimum pressure of 2 to 2.5 Kg sqcm and applying upto 50 mm thick gunniting in cement mortar (1:2) (one part of cement and two part of ghaghar sand) using ordinary port land cement of 43 grade over wherever required, complete all as specified and directed by Engineer-in-Charge. Note:-(i)After placing the additional reinforcement all concrete surface shall be thoroughly scrubbing with (ii) Additional reinforced TMT bars where incoperated in work and quoted rate is including 15mm thick cement plaster in 1:4 (iii) Work to be carried out as in patches as directed by Engr-in-charge. (iv) Rate for steel scaffolding as directed to be included in quoted rate. (v) All demolished material removed from MOD land completely. (vi) Work will be executed at height upto 15 mtrs. (vii) All splashes of cement mortor on existing wall/doors & windows shall be covered and clean by the contractor

Demolition of Brickwork or stone/boulder masonry, built in cement mortar or cement lime mortar including all quoins, arches, pillars, etc, but excluding ashlar facings, dressed stonework and precast concrete articles all as specified and directed

M&L Brickwork with subclass ‘B’ bricks, straight or curved on plan exc 6m mean radius built with cement mortar1:4 complete all as specified and directed

Demolition of cement concrete of any type description and in any position complete all as specified.

M&L for PCC 1:3:6 type C-2 using 40mm graded aggregate as in foundation,sub base under tiles etc complete all as specified and directed by Engr-in-charge.

M & L for machine pressed coloured rubberisd moulded precast concrete interlocking paver block any shape and size confirming to IS 15658-2006 to 60 mm thickness M-35grey cement and pigment complete all as specified and directed by Engr-in-charge.

M&L for sand filling under sub base including watering and consolidating as in cushioning bed for interlocking paver block complete all as specified and directed by Engr-in-Charge.

Dismantling floor, hearth or wall tiling including cement mortar bedding, removing rubbish off the premises all specified.

M & L for 20 cm x 20 cm x 25 mm thick chequered cement concrete tiles set jointed and pointed in neat cement slurry in floors with grey cement and no pigments complete all as specified.

M&L for 25 mm thick PCC 1:2:4 type B1using 20mm graded stone aggregate as in flooring, finished even and fair complete alla s specified and directed by Engr-In- Charge

M & L glazed ceramic colour tile in area size 450mmx300mmx7mm thick set and jointed in neat cement slurry and pointed in coloured cement on vertical surfaces such as in dado/skirting etc over and including 10 mm thick rendering in cement mortar 1:4 complete all as specified and as directed.

M & L non skid ceramic coloured tiles as in works, 7 to 8 mm thick (square/rectangular) area of each tile exceeding 0.06 sqm but not exceeding 0.11 Sqm ( 300 mmx300mm x 7mm thick) set and jointed in neat cement slurry and pointed in colour cement as in floor over and including 15 mm thick screed bed or bedding layer of cement mortar 1:6 complete all as specified and as directed.

S & F non-skid ceramic coloured tiles of 7 to 8 mm thick (square/rectangular) area of each tile exc 0.18 sqm but n.exc 0.38 sqm in floorsset and jointed in neat cement slurry and pointed in colour cement as in floor over and including 15 mm thick screed in CM 1:6 complete all as specified.

S & F non-skid coloured tiles of 7 to 8 mm thick (square/rectangular) area of each tile exc 0.18 sqm but n.exc 0.38 sqm on vertical surfaces such as skirtings including 10 mm thick rendering etc complete all as specified.

M&L for 20mm thick Granite of (any type) work (table rubbed and polished) in steps , jambs,pillars window cills ,cooking platforms over cement screed and jointed with grey cement slurry like in cement mortor 1:4 including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite and including 10mm thick screed bed all as specified and directed.

M&L PCC 1:3:6 type C-2, (using 40 mm graded stone aggregates) as in plinth protection; 75 mm thick; finished even and smooth without using extra cement including necessary formwork complete all as specified and directed.

Taking down chowkats or frame with shutter (without taking out shutter from the frame) not exceeding 1.50 sqm each as doors, windows & ventilators etc. and removal from site all as specified and directed

S&F Solid PVC Door Frame of size 50mm x 47mm made out of 5mm plain colour PVC sheet reinforced with M.S. Square tube, suppling & fixing in opening as per specification & drawing and as directed by Engineer-in-Charge

S&F for 30 mm thick factory made solid panel PVC door shutter confirming to criteria of testing as per IS : 4020, consisting of frame made out of MS tube of 19 guage thickness & size 19x19mm for stiles and 15x15mm for top & bottom rails MS frames shall have a coat of red oxide primer of approved make and shall be covered with 5mm thick heat moulded PVC `C' channel of size 30x50mm forming styles and 5mm thick 75mm wide PVC sheets for top rail lock rail and bottom rail on either side and 10mm (5mmx2) thick 20mm wide cross PVC sheet as gap insert for top rail and bottom rail panelling of 5 mm thick PVC sheet to be fitted in the MS frame welded/sealed to the stiles & rail with 30 mm wide x 5 mm thick PVC sheet beading on either side and joined together with solvent cement, adhesive and an additional 5 mm thick PVC strip of 20 mm width is to be struck on the interior side of 'C' channel using PVC solvent adhesive complete as per manufacturers specifications & drawings ass as directed by Engineer-inCharge.

S&F Aluminium anodised 100 mm long Butt hinges with galvanised mild steel screws complete.all as specified and directed

S&F Aliminium anodised barrel tower bolts, 150 mm long complete.all as specified and directed

S&F Aluminium anodised handles, cast type anodised 125 mm long complete.all as specified and directed

Taking down chowkhats or frame exc 1.5 Sqm but n.exc 4 Sqm each with shutters (W/out taking off shutters from the frames). complete.all as specified and directed

S& F Pressed steel frames of size 125 X 60 mm for doors with one or more rebates including necessary fixing lugs, hinges, lock strike plate, etc, (thickness of sheet shall be 1.25mm) and making good the wall with plaster in CM 1:6 complete.all as specified and directed

S&F for pressed steel frames of size 105 X 60 mm for doors with one or more rebates including necessary fixing lugs hinges, locks strike plate etc, (thickness of sheet shall be 1.25mm) and making good the wall with plaster in CM 1:6 complete all as specified.

M&L PCC 1:3:6 type C-1 using 20 mm graded stone aggregate for filling inback side of pressed steel frame door frames, bed block of hold fast etc complete all as specified and as directed.

S&F 2nd class HW 35 mm thick local made panelled shutters with lock rail and panel of 9mm BWP commercial ply or 12mm veneered particle board with commercial veneering on both faces. The size of rail and style as per IS-1003 (Pt-I) kiln seasoned and chemically pressure treated complete all as specified and as directed.

S&F 35 mm thick glazed skeleton shutters open rebated and prepared to receive guage etc (without sash bars) edges of framing plain chamfered or rounded fitted with cut and mitred beads for securing glass etc and fitted to chowkats complete all as specified and as directed.

Taking down shutters of any description exc. 1 sqm and n. exc. 2 sqm each and removing from site. complete all as specified and as directed.

Taking down shutters of any description n exc. 1 sqm each and removing from site. complete all as specified and as directed.

S& F 18 mm solid PVC ply of 1st quality of both side white colour fixed with screw, solvent cement/adhessive complete all as specified and directed by Engineer-in-charge.

S&F brass Locks, 2 levers for cupboard/Glass doors, grade I, size 50mm complete all as specified and as directed.

S&F Magnetic catcher for Wardrobe, Cub-boards Etc.complete all as specified and as directed.

S&F in repair stainless steel wire cloth 0.36 mm nominal dia of wire and avarage width of aparture 1.40 mm and fixed with tinned tacks or galvanised wire stapple complete all as specified and as directed.

S&F 300 mm size mild steel ordinary rat rail rod pattern springs including roller and roller plate complete.

S&F 250 mm long stainless steel sliding door bolt with hasp, staple(bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections of stainless steel (ISI Marked). complete all as specified and as directed.

S&F 200 mm long mild steel barrel tower bolts, ISI market stove enamelled block with bright bolt and fixed complete all as specified and directed.

S&F stainless steel handles, fabricated type of size 150 mm (ISI Marked).complete all as specified and directed.

S&F stainless steel handles, fabricated type of size 100 mm (ISI Marked).complete all as specified and directed.

S&F 100 mm long aluminium anodised hasp and staple safety tape including bolts to hinge plate and fixed with screws complete all as specified and as directed.

M&L for Preparation of new wood surface of any description over 10cm width or girth applying two coat of synthetic enamel paint over a coat of pink primer complete all as specifed and directed.

M&L anodised aluminium frame (minimum 50 micron powder coating) for doors, windows, ventilators with one or more rebates including cleat for fixing etc. complete all as specified and directed by Engr-in-charge.

S&F aluminium powder coating of any colour (Thickness of powder coating not less than 50 micron) window and ventilator shutter side hung type/ sliding without sashbar, aluminium sections weighing 0.55kg/m incl necessary joining cleat glazing clips, rubber neoprene packing, alumimium anodised snap beading, screws , peg stay 150mm long -1 No, hinges type B-21 100mm long -2 Nos, suitable handle -1 No complete all as specifiedhandles 2 Nos in each door, hinges, aluminium snap beading screws complete all as specified.

Supply and fixing in repairs 7mm thick aluminium powder coated grill of make ' Deco grill DG-104 model fitted in to suitable aluminium channel and fixed to windows / ventilators including channel complete all as directed by Engr-in-charge.

S&F 5.5 mm thick froasted glass panes and glazing exc 0.5 sqm with oil putty or fix in aluminium door / widnow complete all as specified and as directed.

S & F in repairs 20 mm dia galvanized steel tubing, medium grade, with all fitting RM and fixed complete to walls celling or laid in floors complete all as specified and directed by Engr-in-charge.

S & F in repairs 15 mm dia galvanized steel tubing, medium grade, with all fitting RM and fixed complete to walls celling or laid in floors complete all as specified and directed by Engr-in-charge.

Dismantling of existing water tank (PVC/RCC/AC) exceeding 500 litre but not exceeding 1000 litre capacity and removing from site complete all as specified and as directed. Note:- Dismantled water tank shall become the contractor's property as Schedule of Credit.

S & F 1000 ltr capacity rotational moulded polyethylene water storage tanks (cylindrical vertical with closed top) hoisted and fixed in position including 20mm bore ball PTMT valve high pressure with polyethylene float and fly nut complete all as specified.

Demolition of cement concrete is reinforced (reinforcement) cut as required to facilitate demolition) In Roofs, floors (other than ground floors), beams staircases, landing, chajjas, and similar suspended work complete all as specified.

Dismantling of wrought iron or mild steel of any description not otherwise provided for all as specified and directed by Engr-in-charge.

Supply and fixing framed work such as grills, gratings, tank cover, drain covers made of angle,for monkey proofing, channel, bars and sheets etc. with ends of bars shouldered and/or riveted, or forged into spikes, framed guard bars, barred iron doors, ladders, framed balusters, walk ways, railings, framework of water tanks and similar work conforming to Fe 290 Gde E-165 complete all as specified and as directed.

M&L Pre-painted galvalume aluminium zinc coating GI based corrugated steel sheet 0.50mm of an colour having tensile strength of 550Mpa as in roof covering/cladding to wall, fixed with self tapping screws complete all as specified and as directed.

Material and labour for preparation of new steel surfaces of any description over 10 cm in width or girth not other wise described and applying two coats of synthetic enamel paint over a one coat of red oxide zinc chrome primer complete all as specified and as directed.

Material and labour for preparation of old steel surfaces of any description over 10 cm in width or girth not other wise described and applying two coats of synthetic enamel paint complete all as specified and as directed.

S & F in repairs for PVC (SWR) pipes single socketed in any length with rubber ring joints fixed to wall of 160 mm dia complete all as specified.

S & F in repairs for PVC (SWR) bend of 160 mm dia complete all as specified.

S&F in repair of sinks with drainage board of stainless steel 1 mm thick kitchen or laboratory with plugs, washers and waste pipe; including bedding in cement mortar to dwarf wall or including fixing cantilever brackets and connecting union to pipe overall size 915 x 460mm bowl size 410mm x 330mm x 160mm, etc complete all as specified and as directed.

S & F in repair vitreous china squatting pan “ORISSA PATTERN” size 580mmx440mm ‘white’ with integral foot rest (excluding flushing cistern and flush pipe) including connection to trap and to flushing pipe anti syphonage pipe etc and removing old IWC outside MD land complete all as specified

S & F PVC in repairs PVC flushing cistern 10 ltrs capacity, low level, white with inlet, ball valve, float and handle including brackets complete all as specified

S & F in repair vitreous china wash basin, white, flat back, size 550 mm x 400 mm fixed on and including cast iron cantilever bracket 32 mm dia brass waste coupling, waste pipe and including PTMT pillar tap 15mm, waste fitting and union, removing old WHB outside MD land complete all as specified and directed

Supply only PVC connection 15 mm dia and 450 mm long with both end brass fly nut complete all as specified

S & F in repairs for bib taps 15mm bore (for iron pipe) cast copper alloy with fancy type chromium plated butter fly handle screwed down including fixed in repair all as specified. Make: -Prayag

S & F in repair for angle stop valves 15mm bore (for iron pipe) fancy type chromium plated screwed down high pressure with butterfly handle screwed both ends including fixed in repair all as specified.

S & F in repairs of PVC waste pipe 32 mm bore with PTMT waste coupling (half or full threaded) Min weight 45 gms compleate all as specified.

M&L for PVC (SWR) Multi floor trap of 75mm dia, plain with grating including jointing with solvent cement all as specified and directed.

S&F 600x 450mm mirror with PVC frame and 5 mm thick glass with PVCsheet backing and fixed to wooden plugs with chromium plated brass screws and cup washers all as specified and directed.

Excavating in trenches not exc 1.5m wide and not exc 1.50 m depth, for foundations, etc, or for shafts, wells, cesspits, manholes, pier holes, etc and not exceeding 10 square meter on plan for manholes etc and getting out in soft/loose soil complete all as specified and directed.

S&F PVC (SWR) pipes single socketed 110mm dia in any length with rubber ring joints fixed to walls

S&F PVC (SWR) pipes single socketed 110mm dia in any length with rubber ring joints laid in trenches

S& F PVC (SWR) bends 110mm dia any radius complete all as specified and as directed.

S&F PVC (SWR) pipes single socketed 75 mm dia in any length with rubber ring joints fixed to walls

S& F PVC (SWR) bends 75mm dia any radius complete all as specified and as directed.

Dismantling brick tiles or terracing tiles, single layer on roofs complete all as specified and directed by Engr-in-Charge.

Demolition of mud in roofs any thickness, Includung Surface preparation by removal existing roof treatment of tar felt treatment/APP Membrane/PCC/Plaster/ and all foreign material such as grass roots dust etc and removing all debris from MOD land complete all as specified and directed by Engr-in-Charge.

M&L applying water proofing treatment with APP modified polymeric membrane centre core of 100 micron HMHDPE, weight not less than 3 Kg/Sqm and clear thickness of membrane not less than 3 mm, on newly prepared surface with torch application as per manufacturer instruction complete all as specifid and as directed with the following description :- (a) Apply evenly a coat of bituminous primer conforming to IS -3384 @ 0.40 Kg/Sqm. (b) A coat of bonding bitumen confirming to IS -702 of grade 85/25 @ 1.20 Kg/Sqm as a IInd course. (c) Laying of APP modified polymeric membrane as a IIIrd course. (d) A coat of bonding bitumen confirming to IS -702 of grade 85/25 @ 1.20 Kg/Sqm as a forth course. (e) Finishing of top top surface by two coats of aluminium paint

M&L plain cement concrete 1:2:4 type B0 using 12.5 mm graded aggregate as in roof for maint. the uniform slope etc any thickness at any height and in any position all as specified and directed by engr-in-charge at site.

M&L for 10mm thick plastering in CM (1:3) on concrete roof surfaces Sqm with water proofing compound @ 3% by weight of cement, surface finished even and smooth without using extra cement complete all as specified and directed by Engr-in-charge. Note - WPC shall be measured and paid separately.

M&L for Plain cement concrete (1:2:4) type B-0, using 12.5mm graded crushed stone aggregate as in coping including weathering, slightly rounded or chamfered angles and throating including necessary form work,for filling in bed block of hold fast , back side of steel frame etc complete all as specified and directed.

Taking down for servicing the ceiling fan of 1200/1400 mm sweep and wall mounted fan any size at any locations by removing of old grease from bearing of ceiling fan and re-filling new grease including replacement of the worn out nut bolt, rubber, real bush, gun metal split pin, cleaning the complete fan by removing entire dirt, dust and wiping with soap water, cotton waste and commissioning, testing after assembling, connecting to electric system complete all as specified and directed by Engr-in-Charge. Note::- Other spare parts if any required except mentioned in the item will be measured and paid separately in the relevant items in this schedule.

All as per ser item No 91 above but but Exhaust fan of size 230 mm to 300 mm sweep.

Taking down carefully copper /Aluminium point wiring any type (light, fan, socket or power) complete, fittings such as switches, ceiling roses, pendants, regulators sockets etc removing materials to store for keeping in safe custody or for taking credit and making good disturbed surfaces of walls ,floors etc.

Taking down old DB's any size from site and making the good to the disturbed surface complete.

M&L for point wiring complete with 1.5 Sqmm (nominal area) PVC insulated, multi stranded, FRLS copper conductor cable unsheathed in and include PVC conduit with all fittings medium grade ISI Marked and PVC insulated FRLS copper conductor cable of size 1.5 sq mm as earth wire, connected to common earth dolly suitable for mounting modular switches incl modular metal flush boxes and modular face plate all as specified and as directed by Engr-in-charge, (The works includes cutting of chases and making good disturbed surfaces and rate deemed to included in quoted rate complete all as specified and as directed.

One light/fan point controlled by one way switch

One socket point outlet 5/3 pin 5 amps controlled by one switch on the same board.

One socket point outlet 5/3 pin 5 amps controlled by one switch on indipendent board.

All as per item no 95 above but One 3 pin socket out let 15 Amps on independent board, with cables 2.5.0 Sq mm size and earth wire 1.5.0 sqmm.

M&L for modular socket outlet 6A, 2/3 pin combined 2 module

M&L of modular socket outlet 6A/16A, 2/3 pin combined 2 module

M&L for modular switch 1 way 6 Amps 1 module, suitable for 230 Volts Ac supply.

M&L for modular switch 1 way 15/16 Amps 1 module, suitable for 230 Volts Ac supply.

M&L for ceiling rose , 3 phase / PVC/ polycarbonate, isolated body.

M&L for modular white cover plate with frame 1 module.

M&L for modular white cover plate with frame 3 module

M&L for modular white cover plate with frame 6 module

M&L for modular white cover plate with frame 8 module.

M&L for modular metal flush box for 3 module

M&Lfor modular metal flush box for 6 module

M&L for modular metal flush box for 8 module .

S&F in replacement of sheet metal enclousure for MCB DB double door single pole and neutral 8 way with 200 Amps rated bus bar 240 volts double door type.Make: Havells/ndo Asian /ABB/Legrand

All as per item No 112 above but 4 way DB

S&F in replacement of sheet metal enclosure distribution board with hinged cover metal door epoxy powder coated/made of insulating meterial like, ploystyrene, double door 12 way TPN with suitable rated bus bar for (vertical operation) incorporation of MCCB 4 pole 125 Amps 25 KA complete all as specified and directed.make:-Havells/ndo Asian /ABB/Legrand Note : MCCB's,MCB's,Isolators shall be measured and paid separately.

Supply and fix in replacement of 15/16 amp 3 pin plug tops complete all as specified and directed.

Supply and fix in replacement of 15 Amp switch socket 2 in 1, 3 pin box type ISI mark

S&F in replacement of exhaust fan of size 300 mm sweep, 1400 RPM, 4 metal blade, double ball bearing type, metal body, ISI marked with copper winding suitable for 230 Volts, single phase, 50 Hz, AC, with all connected accessories incl taking down the old exhaust fan and keeping in safe custody or for taking credit all as specified and directed by Engr-in-Charge.Make Usha /bajaj/halonix/crompton greasve

S&F in replacement of ceiling fan of 1200 mm sweep, three blade type with double ball bearing suitable for 230 volts, 50 Hz ACs of copper wound with all standard accessories and incl taking down the old exhaust fan and keeping in safe custody or for taking credit all as specified and directed by Engr-in-Charge.Make Usha /bajaj/halonix/crompton greasve

S&F in replacement of step type electronic fan regulator of the Modular socket type, single phase 220 V complete all as specified and directed by Engr-in-Charge.

S&F in replacement of step type electronic fan regulator of the flush type/ socket type, single phase 220 V complete all as specified and directed by Engr-in-Charge.

S&F in replacement of louvers of 250mm to 450 mm sweep upto G+3 storey , exhaust fan made out of MS sheet heavy duty of 22 gauge and making good the disturbed surface of wall both inner and outer side and match with the existing surfaces complete all as specified and directed by Engr-in-Charge. NOTE- Contractor will make all arrangements of safety devices and safety of their workmen and govt property while carying out the work.

M&L in replacement of exhaust fan of 250 mm sweep ventilating fan, speed 1350 RPM suitable for 230 volts, 50 Hz and incl taking down the old exhaust fan and keeping in safe custody or for taking credit all as specified and directed by Engr-in-Charge.

Supply and fix in replacement electric water heater storage type metal body and heating element upto 2 KW capacity 25 litre, BEE 5 Star rated complete with all accessories such as safety valve, thermostate,NRV, connection piece etc. and keeping in safe custody or for taking credit all as specified and directed by Engr-in-Charge

Schedule of Credit

M/S S.K.Electricals (BID ID -3451231)

Neeraj Enterprises (BID ID -3440130)