PROVISION OF FORTIFIED/ UNDERGROUND PAD TRENCH, PROVISION OF CONVENTIONAL GREASETRAPS (BEHIND FOOD COURT, APSARA, KKC AND SWEET SHOP, PROVISION OF OPEN SHEDS AND HARD STANDINGS, ADDN/ ALTN TO BULDING NO T-267 (SWO OFFICE), ADDN/ ALTN TO BUILDING NO T

Amount

B/R PORTION

Excavation over areas, not exceeding 1.5m deep and getting out in soft/loose soil complete.

Excavation over areas, exceeding 1.5m deep and n. exc 3.0 m and getting out in soft/loose soil complete

M&L for 100 mm thick PCC 1:4:8 type D-2 using 40mm graded stone aggregate), as in sub floors, sub bases, etc complete all as specified & directed.

M&L for brick work with sub class ‘B’ old size bricks, straight or curved on plan exceeding 6m mean radius, built in cement mortar 1:6 complete.

M & L Rendering 15 mm thick on fair faces of brick work or concrete surfaces in CM 1:4 on wall surfaces, finishing the surface even and smooth without using extra Cement complete all as specified. Note:- Integral water proofing compound shall be measured and paid for separately.

M&L for rendering 10mm thick in cement mortar 1:6 on faces of brick work or concrete surfaces, finished even and smooth without using extra cement complete.

Supply only Liquid water proofing compound all as directed.

S&F framed brackets of angles or tees with web and flanges cut to shape, drilled and counter sunk for screw, including bending and welding angles, as necessary gusset plates, riveting, etc, n exc 10 kg each bracket confirming to Fe-290 Gde-E-165 including necessary welding ,complete all as specified & directed by Engr-in-Charge.

S&F mild steel plates plain or chequered, 5mm thick or over in thickness in available size of Fe 410-W (Gde-E-250) quality-A, including necessary welding ,complete all as specified and directed by Engineer-in-Charge.

M&L for applying polythene film, 50 micron thick, laid on a coat of bitumen primer @ 0.30 to 0.50 kg per sq.m complete all as specified and directed.

Returning, filling in excavated approved soil, including spreading, levelling, watering and well ramming in layers not exceeding 25cm each complete.

Removing excavated soil not exceeding 50m and depositing where directed at a level not exceeding 1.5m above the starting point complete

S&F Oil & Grease Trap of for capacity of 100 users including inlet & outlet connection for necessary connectivity & of min Capacity - 1000 Ltr of material Stainless Steel 304 grade & Min Thickness should be 1.2mm & Min Sludge Holding Capacity - 450 Ltr & Min Grease Holding Capacity - 200 Ltr , complete all as specified & directed by Engr-in-Charge

S&F 8.00 mm thick mild steel plates plain or chequered, 5 mm thick or over in thickness in available size of Fe 410-W (Gde-E-250) quality-A, including necessary welding on site , complete all as specified and directed by Engineer-in-Charge.

Cutting into existing manholes for connecting new drains 100 mm dia, making good to pipes and rendering, cutting out existing benching for and forming channel (1/2 round or 3/4 section) in plain cement concrete 1:2:4, type B-1 using 20 mm graded crushed stone aggregate, finishing surfaces and reforming benching as required, complete all as specified and directed.

Dismantling of PVC drain pipes, jointed in cement mortar and taking out of renches, if required complete all as specified and directed.

S&F PVC (SWR) pipes single socketed,100 mm bore, in any length with rubber ring joints fixed to wall and floor, complete all as specified and directed.

S&F PVC (SWR) 100 mm Bore (dia), bends any radius, complete all as specified and as specified and directed.

Surface excavation n.exc 30cm deep and averaging 15cm deep and getting out in any type of soil.

M&L 100mm thick Cement concrete 1:2:4 Type B-2 (using 40mm graded stone aggregate) as in flooring including finishing even and smooth without using extra cement complete all as specified and directed.

M&L for sand filling under floor or in foundation or below interlocking tile of 25 mm thick layer including watering and consolidation etc complete all as specified and as directed.

S&F for 60 mm thick machine pressed precast concrete interlocking paver block With grey cement and No pigment, shape and size confirming to IS 15658-2006 M-35 Grade over completed all as specified and directed.

Excavating in post holes (or similar holes) in any type of soil each not exceeding 0.5cum, getting out, returning, filling in and ramming earth or broken rubble mixed with earth around, in layers not exceeding 25cm ,watering and removing surplus soil to a distance not exceeding 50m and making good surface complete.

M&L cement concrete in foundation filling and mass concrete type D2 1:4:8 (using 40mm graded Agg) in post holes all as specified.

S&F galvanised corrugated mild steel sheeting, with two corrugation side lap fixed with 'L' type or 'J' type or cranked hooked bolts with washers in roof, 0.63mm thick, grade-O quality, with 120 grms/sqm zinc coating and grade 'B' Class 8 complete all as specified and directed by Engineer-in-Charge.

Preparing new plastered or un-plastered surfaces of walls and applying two coats of Acrylic exterior emulsion paint in camouflaging (Disruptive) pattern in three colours (Green, grey and brown) over a coat of acrylic primer, complete all as specified and directed. Make : Asian/ Berger/ Nerolac/ ICI/ Shalimar/ Johnson

M & L Hardcore using broken stone boulders not exceeding 63mm deposited spread and levelled in layers not exceeding 15 cm thick watered and rammed to a true surfaces complete all as specified & directed.

M&L 75 mm PCC 1:4:8 type D-2 as in sub base complete all as specified and directed

M&L for 40 mm thick PCC (1:2:4) type B-1 using 20 mm graded stone aggregate as in floor finished even and smooth without using extra cement complete all as specified and directed

Demolition for floor, hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off the premises, complete all specified and directed.

M&L coloured/printed ceramic tiles 7 to 8 mm thick area of each tiles exc 0.18 sqm but not exc 0.38 sqm, laid in floors etc., set and jointed in neat cement slurry and pointed in white or coloured cement to match the shade of tile laid over and including 15mm thick bedding layer in cement mortar (1:6) including necessary cutting and waste as per site requirement complete all as specified and directed by Engineer-in-Charge.

M&L coloured/printed ceramic tiles 7 to 8 mm thick but on vertical surfaces such as skirting incl including 10mm thick rendering in cement mortar 1:4 rough finish to receive the tiles complete all as specified and directed.

M&L for glazed coloured ceramic tiles, first quality (or approved class, colour and design/ shade) of 450X 350X 7mm/450x300x7mm thick in vertical surfaces, as in dado/ skirting etc set & jointed in neat cement slurry & pointed in coloured cement to match with coloured tiles, over and including 10mm thick rendering in cement mortar 1:4 rough finish to receive the tiles complete all as specified and directed.

Demolition of stone/brick masonry built in cement mortar incl quoins, arches, etc but exceeding ashlar facing dressed stone Work etc complete all as specified and directed

Taking down cement plaster on brick or stone walls, etc. including raking out joints, hacking for key, scrubbing down with water, etc, complete all as specified and directed.

Rendering 10mm thick on brick work or concrete surface in cement mortar (1:4), finished even and smooth without using extra cement including Taking down cement plaster on brick or stone walls, etc including raking out joints, hacking for key, scrubbing down with water etc.complete all as specified and as directed

M & L Rendering 15 mm thick on fair faces of brick work or concrete surfaces in CM 1:4 on wall surfaces, finishing the surface even and smooth without using extra Cement complete all as specified. Note:- Integral water proofing compound shall be measured and paid for separately.

M&L for Preparation of old decorated plastered or un-plastered surfaces of walls by scraping the surfaces, brooming down or steel wire brushing down smoke soot, mould, mass and efflorescence salts and trading oil and greasy spots etc and applying one coat of Acrylic washable distemper on wall surfaces including preparation of surfaces by filling cracks/ holes with white putty, complete all as specified and directed.

Preparation of newly or plastered or un-plastered surfaces of walls and applying two coat of Acrylic washable distemper over a coat of primer after applying 3mm thick wall care putty in two layer on prepared surface complete all as specified and directed.

Demolition of cement concrete to ground floor(unreinforced) and paving n.exc 15cm thickness (below or above ground level) and removing rubbish of out side MOD land, complete all as specified and directed.

M&L 100 mm PCC 1:4:8 type D-2 as in sub base complete all as specified and directed

M&L for sand filling in floors or in foundations including watering and consolidation all specified and directed

M&L Chequered cement concrete tiles 25cm x 25cm x 25mm thick, set, jointed and pointed in neat cement slurry in floors with grey cement and no pigment and including screed bed of 20mm thick in CM (1:4) etc.complete all as specified

Dismantling of wall and ceiling boards (fibre, pulp, insulation, etc.) or insulation boards/ slabs/ blankets on any description, any thickness, including cover fillets.

Framed work as in false ceiling, doors or gates of angle or other section with gusset plates, rails, braces, etc. complete drilled for fixing of steel sheeting or other covering. Doors, etc. to be prepared for hanging or sliding with and including either hooks and hinges or steel hanging door fittings (exclusive of steel sheeting or other covering, running rails and guides) and hanging; also fastening and fixing complete conforming to Fe-410 A quality grade, all as specified and directed.

Prelaminated particle board 9mm thick, interior grade, prelaminated one side with decorative choice lamination & other side balancing white lamination with all-around 6mm thick teak wood beading as in false ceiling fixed to metal frame complete all as specified and directed.

Taking down chowkhats of frames of any description n.exc 1.50 sqm with shutters (without taking off shutters from the frames) and making good disturbed portion complete all as specified and directed.

Taking down chowkhats of frames of any description exceeding 1.5 Sqm and n.exc 4 Sqm(without taking off shutters from the frames) and making good disturbed portion complete all as spd.

Taking down shutters of any description exc. 1sqm and not exc. 2 sqm each, complete all as specified and directed.

S & F Powder coated aluminum (minimum thickness of powder coating 50 micron) work for doors, windows, ventilators and partitions (Fixed portions) with extruded built up standard tubular sections/ appropriate Z-sections and other sections of approved make conforming to IS:733 and IS:1285, fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions, i.e. at top, bottom and sides with required EPDM rubber/ neoprene gasket etc. Aluminum sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle,Aluminium snap beading for glazing/ paneling, C.P. brass/ stainless steel screws, all complete as per architectural drawings and the directions of Engineer-in-Charge.

S & F Anodised powder coated aluminum window and ventilator shutters, fixed type without sash bars, aluminum sections weighing of 0.55 kg/RM including fixed with aluminum beading, silicon lining and gaskets, necessary joining cleats, glazing clips, rubber packing, anodised aluminum snap beading, screws etc complete all as specified and directed ( thickness of powder coating not less than 50 micron)

5.5 mm thick sheet glass, ground or obscured or frosted/ tinted and glazing with oil putty or fixed with bead/glazing pins in squares of exe 0.5 sqm in each pane all as specified and directed.

S&F of 2nd class hard wood Plain solid straight chowkhats of wrought framed rebated on the solid, rounded or chamfered put together with glue pinned at joints complete including tarring back of surface in contact with walls all as specified & directed

S&F of 2nd class hard wood 35 mm thick, plain framed, panelled door shutters (two panels) with lock rail and panel of 9mm BWP commercial ply or 12mm veneered particle board with commercial veneering on both faces. The size of rail and stile as per IS-1003 (Part-I) kiln seasoned and chemically pressure treated, fitted to chowkats including all necessary fittings all as specified & directed.

Providing, cement concrete 1 : 2 : 4 type B-1 using 20 mm graded aggregate in lintels upto 1.5m clear span, cills, steps; seismic and other similar bands, plinth courses, string courses, lacing courses, parapets and railings upto 60 cm in height, copings, kneelers, apex stones, bed plates, hold fasts, kerbs, water troughs and the like including weathering, slightly rounded or chamfered angles and throating, as directed

Dismantling of plain or corrugated steel sheeting of any gauge, thickness etc in roof coverings/ cladding/ eave etc complete all as specified.

S&F galvanised corrugated mild steel sheeting, with two corrugation side lap fixed with 'L' type or 'J' type or cranked hooked bolts with washers in roof, 0.63mm thick, grade-O quality, with 120 grms/sqm zinc coating and grade 'B' Class 8 complete all as specified and directed by Engineer-in-Charge.

Preparation of new steel surfaces of steel or iron work or CGI/PGI sheeting in walls or roofing over 10 cm width or girth, not otherwise described and applying two coat of synthetic enamel paint over a coat of red oxide/zinc chromate in camouflaging (Disruptive) pattern (Green, Grey & Brown colour) complete all as specified and directed. (Make: Berger/Johnson/Nerolac/asian/shalimar)

S&F Roof trusses (framed), trussed, posts, struts, purlins, crane gantries, rails and fastenings and heavy bracket framing (Beam, tee, angle, channel or flat sections) including distance pieces, cleats, base plate and gusset plates etc confirming to Fe 410 -W (Gde-E- 250) quality-A complete all as specified and directed.

Preparation of new or previously untreated surfaces of Steel surfaces of any description not otherwise described over 10cm width or girth and applying a coat of synthetic enamel paint over a coat of red oxide complete all as specified

M&L brick work with sub class ‘B’ bricks (locally available best quality) straight or curved on plan to radius half brick wall built in CM (1:6) complete all as specified and directed.

Demolition of stone slabs and tiles of any description or thickness in floors aprons etc laid beded and pointed in any mortar complete all as specified and directed.

M&L for 18-20mm thick granite stone (slab) of any colour/type, (table rubbed and polished) work as in floors/ vertical surfaces, cooking platforms and like, set in neat cement including pointing in white cement with admixture of pigment to match with shade of granite, complete laid over and including 15mm thick screed bed in cement mortar (1:6) laid and jointed with gray cement slurry mixed with pigment, complete all specified and directed.

Machine cut kota stone slab flooring 20-25mm thick over cement screed base laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing and including 15mm thick screed bed in cement mortar (1:6) laid and jointed with gray cement slurry mixed with pigment, complete all specified and directed.

Demolition of cement concrete (reinforced) to Roofs, floors (other than ground floors), beams, staircases, landing, chajjas and similar suspended work complete all as specified and directed.

M&L RCC (nominal mix) as in slabs supported on walls, beams and columns in floors, roofs, landings, balconies, canopies, deck slabs and in shelves and the like Type B1 1:2:4 (20 mm graded aggregate) incl demolition of cement concrete reinforced of any description in any position complete all specified and directed.

S&F mild steel TMT bars 10 mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9 mm dia or securing with clips, complete all specified and directed.

Form work to soffits of suspended slabs n exc 200mm thick (Horizontal or sloping) rough finished surfaces of concrete, complete all specified and directed.

M&L for cement concrete 1:3:6 type C-2 (40mm graded aggregate) 25 mm thick for sub-base in sub floor sub base, floor and paving etc cement complete all as specified and directed.

M&L for sand filling of 50mm thick in floors or in foundations including watering and consolidation all specified and directed

S&F 500 litre capacity rotational moulded polyethylene water storage tank (cylindrical vertical double layered with closed top) duly provided with necessary fittings/ fixtures for connecting inlet, outlet, washout and overflow pipes; hoisted and fixed in position

Taking up or down 15 mm dia steel tubing in wall, ceiling or floor and connections, including cleaning for refixing or removal to store etc complete.

S&F 15 mm dia medium grade galvanised with all fittings and fixed complete to walls and ceilings or laid in floors.

S&F in repair 15mm bore gun metal, globe or gate valves, with iron wheel head, screwed both ends for iron pipe complete all as specified and directed.

S&F in repair 15 mm bore CP Bib tap cast copper alloy fancy type crutch or butterfly handles screwed down for iron or for brass ferrule complete.

S&F in repair stop valve/angle valve, fancy type, chromium plated, cast copper alloy screwed down, high pressure, with crutch or butterfly handle of 15mm dia. Screwed both ends for iron pipe or for unions and fixed. all as specified & directed.

S&F in repair Brass CP sink mixer for hot & cold for 15mm dia complete fixed to connection as specified and directed.

S&F sinks with drainage board made of stainless steel 1.00 mm thick kitchen or laboratory with plugs, washers and wastes; including bedding in cement mortar to dwarf wall or including fixing cantilever brackets and connecting union to pipe overall size 915mm x 460mm bowl size 410mm x 330mm x 160mm complete all as specified and directed.

E/M PORTION

Supply and fixing of semi integrated solar light 20W/180W complete with solar panel, battery, charge controller , LED luminaire, mounting bracket, cables, and all necessary accessories including proper installation , alignment of the solar panel for optimal efficiency, wiring, and securing all components as per standard specifications and shall be tested for functionality, performance, and reliability, and commissioned to the satisfaction of the Engineer-in-Charge. Note : All materials used shall be conforming to relevant IS/IEC standards.

M&L for Point wiring complete as specified with 1100 volt grade 1.5sq.mm. (nominal area) single core PVC FRLS insulated unsheathed cable multi-stranded copper conductor drawn through and including rigid non-metallic PVC conduit of suitable size but not less than 20mm dia , with all fittings, fixed on concealed along with necessary metal flush boxes of required module mounting for modular fittings in the wall suitable for housing modular pattern switches/ sockets/ regulators etc. duly earthed with same cable size FRLS type as for wiring above but green in colour as continuous earthing wire complete all as specified for :- (a) One light /fan/bell point controlled by one nos, one way 5/6 Amps switch.

(b) All as per srl item no 1.0 here-in-before but using One 3/5 pin Modular type socket outlet, 5/6 Amp on the same board controlled by one nos, one way switch.

(c) All as per srl item no 1.0 here-in-before but using One 3/5 pin modular type socket outlet, 5/6 Amp, independent controlled by one nos, one way switch.

All as per srl item No 73.00 here-in-before but using cable of size 2.5 sqmm (for phase & neutral) and 1.5 sqmm as continuous earth cable for 15/16 Amps modular type socket outlet, independent controlled by one nos, one way switch complete all as specified.

S&F modular piano type switch one way one module, SP, flush type, 5/6 Amps, 230 volts AC, 50 Hz complete all as specified.

S&F modular piano type socket outlet flush type 2 module, 3 pin, 5/6 Amps, 230 volts AC, 50 Hz, multipurpose type complete all as specified.

S&F modular piano type switch one way one module, SP, flush type 15 Amps, 230 volts AC, 50 Hz complete all as specified.

S&F modular piano type socket outlet flush type 2 module, 3 pin, 5/15 Amps, 230 volts AC, 50 Hz, multipurpose type complete all as specified.

Supply & fix wall mounted fans 230 volts single phase oscillating , Air boll high speed 450 mm sweep suitable for wall mounting complete all as specified and directed.

S&F in replacement of sheet metal enclosure DB SPN 8 way, double door, 240 volts AC, surface mounting complete with suitable busbar, neutral link & earth link suitable for MCB DP/SPN as incomer & MCB SP as outgoing complete all as specified.

S&F in replacement of MCBs, SP, 6-32 Amps, 230 volts,10 kA rupturing capacity, C curve type complete all as specified.

S&F in replacement LED building security light 35 Watt or higher, IP 66 with battery back up, Auto on/off/dimm Functioning as per product TDS complete all including and connecting up including mounting including GI pipe of suitable dia and clamps, nut, bolts, washers with all accessories. Make- Halonix HLSLD-ML04-30-CWL-INV-RTC-R /Havells/ Wipro

S&F in replacement of wiring for submain with PVC insulated unsheathed copper conductor cable, multi stranded, single core, FRLS type, 1100 volts grade 2 x 1.5 sqmm complete drawn in and including casing capping ISI marked of suitable size and its accessories along with 1x 1.5 sqmm PVC insulated unsheathed copper conductor cable, multi stranded for continuous earth wire including making good the disturbed surface complete all as specified.

S&F in replacement of MCBs, SPN, 32 Amp, 230 volts, 10 kA rupturing capacity, C curve type complete all as specified.

Supply and fixing LED luminaire 600 mm x 600 mm,35/36 watt, 220 V AC recessed type with high efficiency PMMA diffuser soft glare free light complete with driver, holders & LED lamp suitable for roof ceiling including connecting up with driver three core flexible copper conductor cases of suitable size complete all specified and directed.

Supply and fixing ceiling fans complete with blades, down rods, regulator and accessories, 230 V, 1200 mm sweep. Min air delivery 210 CFM with service value 6.00 BEE. Five star rated with brushless direct current motor (BLDC) and making good disturbed surfaces by cement mortar along with fixing with help of hole fastener including hanging arrangement i.e. hook complete all as specified and as directed.

S&F Anti suicide fan rod for ceiling fan with all fitting and fixed complete all specified and as directed.

S&F in ceiling rose 3 terminals, PVC/Polycarbonate/Bakelite, isolated body 230 volts AC, 50 Hz complete all as specified.

S&F in replacement LED tube light fitting 1x20 watts, 220 volts AC, 1200 mm, with aluminum housing & integrated electronic driver complete with driver with polycarbonate diffuser & thd< 10% including connecting up with three core twisted flexible copper conductor cable of suitable size from ceiling rose complete all as specified. Make- Havells/Phillips/Wipro

M&L for taking down existing Geyser of any capacity and submitted to E/M subdivision with all the connected accessories, all as per direction of engr-in-charge.

S&F sheet metal steel plug & socket DB SP with metal clad 2 pin & earth plug and socket SP 20 Amps, 230 volts AC, surface mounting type complete with one MCB SP, 20 Amps, 10 kA complete all as specified.

Supply and fix electric water heater, storage type steel body with copper inner tank and heating element capacity 50 litre, BEE 5 Star rated complete with all accessories such as safety valve, thermostat, NRV, connection piece etc. complete all as specified and as directed. Make-Bajaj/ Racold/ Havells/ Crompton

M&L for fixing of exhaust fan 450 mm sweep Heavy duty type 220 V, single phase 50 Hz metallic body 4 blades along with bird repellers including cutting chases/glass and making good disturbed surfaces by cement mortar along with fixing with help of hole fastener. Complete all as specified and as directed. Note- Work includes making hole in wall and making good disturbed surface using cement mortar. Make- Ventil AirDB Havells/ or equivalent in Hindware/Bajaj/Crompton

S&F in replacement of wiring for submain with PVC insulated unsheathed copper conductor cable, multi stranded, single core, FRLS type, 1100 volts grade 2 x 4 sqmm complete drawn in and including casing capping ISI marked of suitable size and its accessories along with 1x 4.0 sqmm PVC insulated unsheathed copper conductor cable, multi stranded for continuous earth wire including making good the disturbed surface complete all as specified.

Supply, install, testing & commissioning of outdoor type transformer AC,3 phase,50 Hz 400 KVA capacity, ONAN type copper wound step down 11/0.433 volts (at no load) double wound oil immersed naturally air cooled with external cooling tubes, core type delta connected on primary side(HV) and star connected on secondary side (LV) in accordance with vector Group DYN11 with neutral brought out on secondary side (LV) and having 6 teps tap changer +/- 2.5%,+/-5.0%,+/-7.5% by means of hand operated off load tap changer gear. The maximum temperature rise should not exceed 50 degree Celsius in oil and 55 degree Celsius in HV/LV winding when measured by resistance method after continuous full load run on an ambient tem 40 degree celesius,transformer shall be of BOLTLESS core design and conforming to IS-1180 part -1 2014 and energy efficiency level 2,complete transformer mounted on suitable four wheel trolley with necessary protection to move any where in the station as required complete all as specified and as directed by the Engineer-in-Charge. Make: ALBA/AREVA/ Schneider/ ABB/ ITL or equivalent Note: (i) the contractor should submit design and drawing for the transformer and trolley for the necessary approval from the accepting officer.

(a) Rating and Terminal marking plate- one (b) Earthing Terminal- Two (c ) Lifting Lugs- Two (d) Drain valve with Blanking plate - One (e) Filter Valve with blanking plate- One (f) Conservator-One (g) Oil Level indicator with minimum marking (h) Dehydrating breather-One (j) Air Release devise - One (k) Thermometer Pocket-One (l) Pressure relief valve - One (m) Roller unidirectional-Four (n) Both side (HV and LV) cable Box (o) Separate Brought out Neutral Terminal (p) Off Circuit Tap Changer (q) 100 MM dia stem type Thermometer

Supply of Trolley size of 3658 mm Length X 1829 mm Width with main chassis of size 100mm X 50mm MS channel of 6 mm thick, support channel of size 75mm X 40mm MS channel of 6 mm thick and floor with 8 mm thick chequred plate. Side walls made up with welded wire mesh and Rear door fixed by hinges & lock. Axle 02 Nos of 63mm square, rim double plated 04 Nos. Tyres 04 Nos of size 7-50:16. Toe hook shall be made of forged steel, suspension system axle will be fitted with leaf spring and roof covered with GI sheet. Isolator and fuse mountings are of 63X63X40cm Box Pipe including connection between transformer and switch fuse box , 500 amps main switch 4 pole with HRC fuse protection , 50x50x5mm MS Angle and 75x38 mm " C" Channel clamp 2 nos for transformer. Carrying capacity of 5 Ton for mounting of 400 KVA Transformer. Rate quoted by the contractor inclusive of the following : (i) connection with flexible single core copper cable 1100 volt grade of size suitable for full load current ratings of transformer from transformer to Main switch. (ii) Main switch 500 amps 4 pole with and incl HRC fuse including necessary fixing arrangement with its closed enclosure. Make : Narain Trolley Udhoyg / New India equipments/ Indotech engineers / as approved by GE

Note:- An amount of Rs.21,967.60 on account of credit schedule for Sch 'A' Part-II Shall be deducted from the total amount of BOQ to arrive at the contract sum.

M/S ABBAS M. ENTERPRISES (BID ID -3379911)