Interior or Renovation work of 24 staff quarters at Ladakh Bhawan, Chanakyapuri , New Delhi

Dismantling C.I. pipes including excavation and refilling trenches

after taking out the pipes, manually / by mechanical means

breaking lead caulked joints, melting of lead and making into

blocks including stacking of pipes & lead at site within 50 metre

lead as per direction of Engineer-in-Charge:

Dismantling G.I. pipes (external work) including excavation and

refilling trenches after taking out the pipes, manually / by

mechanical means including stacking of pipes within 50 metres

lead as per direction of Engineer-in-Charge:

Dismantling of flushing cistern of all types (C.I. /PVC/Vitrous China)

including stacking of useful materials near the site and disposal of

unserviceable materials within 50 metres lead.

Dismantling o Wash basins, Urinals, WC including stacking of useful

material near the site and disposal of unservicable materials within

1.12 on item Nos 48.00

Demolishing R.C.C. work manually / by mechanical means

including stacking of steel bars and disposal of unserviceable

material within 50 metres lead as per direction of Engineer-in-

Extra for cutting reinforcement bars manually / by mechanical

means in R.C.C. or R.B. work (Payment shall be made on the cross

sectional area of R.C.C. or R.B. work) as per direction of Engineer -

Extra for scrapping, cleaning and straightening reinforcement from

R.C.C. or R.B. work.

Carriage of material by mechanical transport including loading

unloading and stacking

1.1.1 Lime, murrum, building rubbish

TOTAL OF DISMANTLING 1,019,183.80

Earth work in excavation by mechanical means (Hydraulic

excavator)/ manual means over areas (exceeding 30 cm in depth,

2.6 1.5 m in width as well as 10 sqm on plan) including getting out and

disposal of excavated earth lead upto 50 m and lift upto 1.5 m, as

1 directed by Engineer-incharge. cum 6 205.45 1,232.70

Filling available excavated earth (excluding rock) in trenches,

plinth, sides of foundations etc. in

2.25 layers not exceeding 20cm in depth, consolidating each deposited

layer by ramming and watering,

2 lead up to 50 m and lift upto 1.5 m. cum 1 253.95 253.95

Providing and laying in position specified grade of reinforced

5.1 cement concrete, excluding the cost of centering, shuttering,

3 finishing and reinforcement - All work up to plinth level :

1:1.5:3 (1 cement : 1.5 coarse sand (zone-III) derived from natural

5.1.2 sources : 3 graded stone aggregate 20 mm nominal size derived

from natural sources) cum 1.2 8,364.20 10,037.04

Reinforced cement concrete work in beams, suspended floors,

roofs having slope up to 15° landings, balconies, shelves, chajjas,

lintels, bands, plain window sills, staircases and spiral stair cases

5.3 above plinth level up to floor five level, excluding the cost of

centering, shuttering, finishing and reinforcement with 1:1.5:3 (1

cement : 1.5 coarse sand(zone-III) : 3 graded stone aggregate 20

4 mm nominal size). CUM 5 10,719.30 53,596.50

Centering and shuttering including strutting, propping etc. and

5 removal of form for :

Foundations, footings, bases of columns, etc. for mass concrete

Lintels, beams, plinth beams, girders, bressumers and cantilevers

Steel reinforcement for R.C.C. work including straightening, cutting,

5.22A bending, placing in position and binding all complete above plinth

5.22A.4 Thermo-Mechanically Treated bars of grade Fe-500D or more. kg 690 89.65 61,858.50

Providing and laying factory made chamfered edge Cement

Concrete paver blocks in footpath, parks, lawns, drive ways or light

traffic parking etc, of required strength, thickness & size/ shape,

made by table vibratory method using PU mould, laid in required

colour & pattern over 50mm thick compacted bed of sand,

compacting and proper embedding/laying of inter locking paver

blocks into the sand bedding layer through vibratory compaction

by using plate vibrator, filling the joints with sand and cutting of

paver blocks as per required size and pattern, finishing and

sweeping extra sand. complete all as per direction of Engineer-in-

80 mm thick C.C. paver block of M-30 grade with approved color

design and pattern. 439,872.00

Providing and fixing double scaffolding system (cup lock type) on

the exterior side, up to seven story height made with 40 mm dia M.S.

tube 1.5 m centre to centre, horizontal & vertical tubes joining with

cup & lock system with M.S. tubes, M.S. tube challies, M.S. clamps

and M.S. staircase system in the scaffolding for working platform

etc. and maintaining it in a serviceable condition for the required

duration as approved and removing it there after .The scaffolding

system shall be stiffened with bracings, runners, connection with the

building etc wherever required for inspection of work at required

locations with essential safety features for the workmen etc.

complete as per directions and approval of Engineerin- charge .The

elevational area of the scaffolding shall be measured for payment

purpose .The payment will be made once irrespective of duration

of scaffolding.

Note: - This item to be used for maintenance work judicially,

necessary deduction for scaffolding in the existing item to be done.

SUB TOTAL OF CIVIL WORKS 835,166.40 0.00

2 MASONRY AND PLASTER

Cement concrete flooring 1:2:4 (1 cement : 2 coarse sand : 4

graded stone aggregate) finished with a floating coat of neat

cement, including cement slurry, but excluding the cost of nosing of

steps etc. complete.

11.3.1 40 mm thick with 20 mm nominal size stone aggregate SQM 1620 545.00 882,900.00

Brick work with common burnt clay F.P.S. (non modular) bricks of

2.2 6.4 class designation 7.5 in superstructure above plinth level up to floor

V level in all shapes and sizes in :

6.4.1 Cement mortar 1:4 (1 cement : 4 coarse sand) CUM 12 8,512.10 102,145.20

Half brick masonry with common burnt clay F.P.S. (non modular)

2.3 6.13 bricks of class designation 7.5 in superstructure above plinth level

up to floor V level.

6.13.2 Cement mortar 1:4 (1 cement :4 coarse sand) SQM 120 1,018.05 122,166.00

Extra for providing and placing in position 2 Nos 6mm dia. M.S. bars

at every third course of half brick masonry. 120 86.45 10,374.00

CEMENT PLASTER :- 15 mm cement plaster on the rough side of

single or half brick wall of mix.

2.6 13.4 ROUGH CEMENT PLASTER :- 12 mm cement plaster of mix

POP PUNNING (12mm-15mm) : Providing and fixing Average 12mm

to 15mm thick POP Punning over cement plaster in line & plumb

finished smooth to receive paint. (Internal surfaces of walls).

Providing and laying water proofing treatment in sunken portion of

WCs, bathroom etc., by applying cement slurry mixed with water

proofing cement compound consisting of applying : a) First layer of

slurry of cement @ 0.488 kg /sqm mixed with water proofing cement

compound @ 0.253 kg/sqm. This layer will be allowed to air cure for

4 hours. b) Second layer of slurry of cement @ 0.242 kg/ sqm mixed

with water proofing cement compound @ 0.126 kg/ sqm. This layer

will be allowed to air cure for 4 hours followed with water curing for

48 hours. The rate includes preparation of surface, treatment and

sealing of all joints, corners, junctions of pipes and masonry with

polymer mixed slurry.

Supplying chemical emulsion in sealed containers including delivery

2.34.1 Chlorpyriphos/ Lindane emulsifiable concentrate of 20% Litre 200 200.90 40,180.00

Diluting and injecting chemical emulsion for POST-

2.9 2.35 CONSTRUCTIONAL anti-termite treatment (excluding the cost of

chemical emulsion) :

Treatment of soil under existing floors using chemical emulsion @

one litre per hole, 300 mm apart including drilling 12 mm diameter

holes and plugging with cement mortar 1 :2 (1 cement : 2 Coarse

sand) to match the existing floor:

2.35.3.1 With Chlorpyriphos/Lindane E.C. 20% with 1% concentration SQM 2600 256.15 665,990.00

FOAM CONCRETE FILLING UNDER TOILETS AND PNTRY:- Filling and

compacting Foam Concrete for raising level of toilets and pantry

2.10 MR and finishing in a coat of lean concrete screeding with CUM

waterproofing compound complete in all respects to take Tile

Flooring as per flooring specifications. 113 5,556.80 627,918.36

Providing and laying in situ seven course water proofing treatment

with APP (Atactic poly-propylene) modified Polymeric memberane

over roof consisting of first coat of bitumen primer @ 0.40 litre per

sqm, 2nd, 4th & 6th courses of bonding material @ 1.20 Kg/sqm,

which shall consist of blown type bitumen of grade 85/25

conforming to IS : 702, 3rd and 5th layers of roofing membrane APP

modified Polymeric membrane 1.5 mm thick of 2.25 Kg/sqm weight

consisting of five layers prefabricated with centre core as 20 micron

2.11 14.86 HMHDPE film sandwiched on both sides with polymeric mix and the sqm

polymeric mix is protected on both side with 20 micron HMHDPE

film. 7th, the top most layer shall be finished with brick tiles of class

designation 10 grouted with cement mortar 1:3 (1cement : 3 fine

sand) mixed with 2% integral water proofing compound by weight

of cement over a 12 mm layer of cement mortar 1:3 (1 cement : 3

fine sand) and finished neat (item of laying brick tiles shall be paid

for separately).

SUB TOTAL OF MASONRY AND PLASTER 4,012,736.76 1,495,306.75

3 PAVING AND WET WORKS

Providing and fixing Ist quality ceramic glazed wall tiles conforming

to IS: 15622 (thickness to be specified by the manufacturer), of

approved make, in all colours, shades except burgundy, bottle

green, black of any size as approved by Engineer-in-Charge, in

skirting, risers of steps and dados, over 12 mm thick bed of cement

mortar 1:3 (1 cement : 3 coarse sand) and jointing with grey

cement slurry @ 3.3kg per sqm, including pointing in white cement

mixed with pigment of matching shade complete. 360 1,063.45 382,842.00

Providing and laying Ceramic glazed floor tiles of size 300x300 mm

(thickness to be specified by the manufacturer), of 1st quality

conforming to IS : 15622, of approved make, in all colours, shades,

except White, Ivory, Grey, Fume Red Brown, laid on 20 mm thick

bed of cement mortar 1:4 (1 Cement : 4 Coarse sand), jointing with

grey cement slurry @ 3.3 kg/ sq.m including pointing the joints with

white cement and matching pigments etc., complete.

Providing and laying vitrified floor tiles in different sizes (thickness to

be specified by the manufacturer) with water absorption less than

0.08% and conforming to IS: 15622, of approved make, in all colours

3.3 11.41 and shades, laid on 20mm thick cement mortar 1:4 (1 cement : 4

coarse sand), jointing with grey cement slurry @ 3.3 kg/ sqm

including grouting the joints with white cement and matching

pigments etc., complete.

Providing and laying Vitrified tiles in different sizes (thickness to be

specified by manufacturer), with water absorption less than 0.08 %

and conforming to I.S. 15622, of approved make, in all colours &

3.4 11.46 shade, in skirting, riser of steps, over 12 mm thick bed of cement

mortar 1:3 (1 cement: 3 coarse sand), jointing with grey cement

slurry @ 3.3 kg/ sqm including grouting the joint with white cement &

matching pigments etc. complete.

Grouting the joints of flooring tiles having joints of 3 mm width, using

epoxy grout mix of 0.70 kg of organic coated filler of desired shade

3.5 11.48 (0.10 kg of hardener and 0.20 kg of resin per kg), including filling /

grouting and finishing complete as per direction of Engineer-in-

8.2 Providing and fixing 18 mm thick gang saw cut, mirror polished,

premoulded and prepolished, machine cut for kitchen platforms,

vanity counters, window sills, facias and similar locations of required

size, approved shade, colour and texture laid over 20 mm thick

3.9 base cement mortar 1:4 (1 cement : 4 coarse sand), joints treated

with white cement, mixed with matching pigment, epoxy touch

ups, including rubbing, curing, moulding and polishing to edges to

give high gloss finish etc. complete at all levels.

8.2.2 Granite of any colour and shade

8.2.2.2 Area of slab over 0.50 sqm SQM 65 4,425.35 287,647.75

KITCHEN/ PANTRY/ HAND WASH COUNTER :- Providing and fixing

pantry and toilets with Granite stone top (with straight edge

polished nosing) complete with base cabinet made of 20mm BWP

board, outside surface (shutters) finished in 1mm thick Laminate of

approved shade. All internal surfaces to have balancing laminate.

3.10 MR The rate inclusive of necessary hardware, handle lock sets, self RMT

closing hinges, spring loaded shutter, latch inside, all cabinet

hardware complete as per Architects approval. (BR of stone to be

taken as Rs 1600/Sqmt). Width of work top counter 600mm/

detailed drawings.

TOTAL FOR PAVING & WET WORKS 4,707,699.25 1,075,581.13

6 DOORS & WINDOWS

DOOR FRAMES- Providing wood work in frames of doors, windows,

clerestory windows and other frames, wrought framed and fixed in

6.1 9.1 position with hold fast lugs or with dash fasteners of required dia &

length ( hold fast lugs or dash fastener shall be paid for separately).

9.1.1 Second class teak wood CUM 11.5 131,576.95 1,513,134.93

FLUSH DOOR:- Providing and fixing ISI marked flush door shutters

conforming to IS : 2202 (Part I) non-decorative type, core of block

board construction with frame of 1st class hard wood and well

matched commercial 3 ply veneering with vertical grains or cross

bands and face veneers on both faces of shutters :

35 mm thick including ISI marked Stainless Steel butt hinges with

necessary screws 420 2,015.75 846,615.00

Extra for providing lipping with 2nd class teak wood battens 25 mm

6.3 9.23 minimum depth on all edges of flush door shutters (over all area of SQM

door shutter to be measured) 420 401.40 168,588.00

Providing and fixing wooden moulded beading to door and

6.4 9.40 window frames with iron screws, plugs and priming coat on

unexposed surface etc. complete:

9.40.1 2nd class teak wood

Providing 40x5 mm flat iron hold fast 40 cm long including fixing to

frame with 10 mm diameter bolts, nuts and wooden plugs and

6.5 9.53 embedding in cement concrete block 30x10x15cm 1:3:6 mix (1 EACH

cement : 3 coarse sand : 6 graded stone aggregate 20mm nominal

MORTICE LOCK AND LEVER HANDLES- Providing and installing

Tubular Handle TH 123 with Roses & Escutcheon in SS packaged

with Mortice lockset 55mm backset, 20 SS forend, SS strike plate and

EP Cylinder for all flush doors. 152 2,894.71 439,995.54

HANDLES;- Providing and fixing bright finished brass handles with

screws etc. complete:

TOWER BOLTS:- Providing and fixing aluminium tower bolts, ISI

6.11 9.97 marked, anodised (anodic AC 10 as per IS : 1868 ), transparent or

dyed to required colour or shade, complete:

DOOR STOPPER:- Providing and fixing bright finished brass hanging

6.12 9.82 type floor door stopper with necessary screws, etc. complete. EACH

UPVC Windows : Supply and Fixing of Tripple Track/ Tripple Channel

UPVC Windows, DGU/ Sandvich Glasses (6 mm Reflective Glass + 10

6.13 MR mm Air Gap + 6 mm Plain Toughned Glass) on two tracks and SS sqm

Mesh on One Track, complete as per the requirement of engineer

SUB TOTAL OF DOORS & WINDOWS 3,018,056.33 2,344,312.14

8 FINISHES & MISCELLANEOUS

PRIMER: Applying one coat of water thinnable cement primer of

7.1 13.43.1 approved brand and manufacture on wall surface. Water thinnable SQM

Providing and applying white cement based putty of average

thickness 1 mm, of approved brand and manufacturer, over the

plastered wall surface to prepare the surface even and smooth

13.48A Finishing walls with 100% Premium acrylic emulsion paint having

VOC less than 50 gm/litre and UV resistance as per IS 15489:2004,

7.2 Alkali & fungal resistance, dirt resistance exterior paint of required

shade (Company Depot Tinted) with silicon additives.

13.48A.1 New work (Two or more coats applied @ 1.43 litre/ 10 sqm. Over

and including priming coat of exterior primer applied @ 0.90 litre/10

Steel work welded in built up sections / framed work, including

cutting, hoisting, fixing in position and applying a priming coat of

approved steel primer using structural steel etc. as required.

In gratings, frames, guard bar, ladder, railings, brackets, gates and

similar works 820 142.30 116,686.00

Painting with synthetic enamel paint of approved brand and

manufacture to give an even shade:

13.61.1 Two or more coats on new work SQM 720 131.45 94,644.00

SUB TOTAL OF FINISHES & MISCELLANEOUS 1,467,405.93 0.00

8 BOOM BARRIERS AND PARKING CANOPY

Supply & Installation of tensile fabric canopy in set back to cover

car parking bays. Supply & Installation of free standing tensile fabric

canopy. The entire structural frame work should be designed as per

the current codes and fixed over granite platform / in ground

including digging concrete base preparation for foundation block

base plate and erection with repair and resurfacing to match

existingfinish. The fabric to be Ferrari/ low & Bonar or equivalent

1 Fabric is resistance to U.V. rays and color degradation, U.V.

resistance: 7 to 8/8 treated with Teflon for anti staining, oil

repellency and rot proof with a Water Repellent- 30 cm water

column and will not support mildew growth The structure should be

complete in all respect including fittings and accessories. Provision

of water drainage via. channel and pipe at the end of the slope

foundation preparation for the tubular section , PCC block

exceeding 100mm on all side more than tubular section foot print,

structure should withstand wind load or structurally sound etc.

complete subject to detail engineering on site and submit shop

drawings/ stadd calculation before starting the work.

2 MR Automatic Parking Hydraulic Boom Barrier

Boom Length in 3 mtr. LED Type Boom, LED Connectivity

Options., Automatic Barrier Feature:

Barriers Hydraulic barrier (Right /Left Version)with boom

Opening/ Closing Time – 4-5 Sec. Fully.

Automatic with use cycles 100% with push button, Four J

hooks, Foundation plate. Round Boom. Push Button.

BARRIER MODEL 630 STD

Power supply (Vac / Hz) 230 {+6%/ -10%} / 50

Absorbed power (W) 220

Absorbed current (A) 1

Type of oil FAAC HP OIL

Oil quantity (Lt) ~ 1.8 , Barrier weight – 73 Kg

Winding heat protection (°C) 120

Anti-crushing system standard by-pass valves

Type of slow-down Electronic

Operating ambient temperature (°C) -20 / +55

Hood protective treatment Catachresis AISI 316 L

Protection class IP 44

Body Dimensions 390,290, 200,94

Photocell (Safety Beam Sensor)

SITC of above items Set 2 197,880.98 395,761.96

SITC of FRP portal over entrance porch as per approved design.

SUB TOTAL OF BOOM BARRIERS AND PARKING CANOPY 0.00 3,067,643.94

BOQ FOR PLUMBING

SECTION DESCRIPTION S.I (AMOUNT) N.S.I (AMOUNT)

A SANITARY FIXTURES & FITTINGS 207,360.00 2,214,586.38

B WATER SUPPLY 1,365,912.10 0.00

C INTERNAL DRAINAGE (SOIL, WASTE & VENT PIPES) 1,747,585.80 0.00

Total Cost ( Carried Forward) in Rs. 5,535,444.28

BOQ FOR PLUMBING

SUB AEAD A: SANITARY FIXTURES & FITTINGS

DSR - DSR Rate NS Rate DSR Amount

SL. NO. DESCRIPTION OF ITEMS UNIT Qty NS Amount (Rs)

1 Providing & fixing glazed vitreous china single trap syphonic

pattern having back inlet ,supporting chair ,wall hung water

closet with cistern complete with all internal

fittings/accessories and CP brass flush bend (European type)

water closet with seat and lid, with C.P. brass hinges and

rubber buffers, adapter, rubber joints fixed to W.C., C.P. brass

screwed washers including cutting and making good the

walls and floors wherever required and HDPE wc pan

connector including jointing with white cement coomplete in

Wall hung W.C. pan (White colour)with white plastic seat & lid

"Thermoset moulded ( bakelite ) IS 2548 Part I Each 24 21,415 513,951.14

2 Supply, installation, testing and commissioning of Hand

Shower (Health Faucet) with 8mm dia, 1M long PVC tube and

NS wall hook CP brass wall flange. Each 24 1,824 43,767.73

3 Providing and fixing C.P. brass shower rose with 15 or 20 mm

4 Providing & fixing glazed vitreous china wash basin with R.S.

or C.I. brackets painted white, 32mm C.P. brass waste of

standard pattern , C.P brass wall flange 32 mm dia. C.P. brass

bottle trap and union 32 mm dia C.P. pipes to wall flange.

complete including cutting and making good the walls

NS wherever required.

Undercounter wash basin (White colour)of size: 585x430 mm Each 24 9,439 226,534.98

5 Providing & fixing 15mm C.P. brass single hole wash basin

mixer without popup waste system with 450mm long copper

NS pipes and brass nut Each 24 4,204 100,904.24

17.22A Providing and fixing CP Brass 32mm size Bottle Trap of

approved quality & make and as per the direction of

6 Engineer-in-charge. Each 48 886.25 42540

7 Providing & fixing toilet paper holding including cutting and

NS making good the walls. Each 24 1,867 44,818.05

8 Providing & fixing Horizontal liquid soap dispenser with

stainless steel lid and brackets fixed to wooden cleats with

NS C.P. brass screws. Each 24 3,755 90,121.92

9.00 Providing & fixing C.P. brass coat hooks fixed on toilet door

NS with C.P. brass screws Each 24 650 15,597.54

10 Providing & fixing beveled edge mirror 5.5mm thick of

superior quality plate glass complete with 6mm thick marine

ply sheet ground fixed to wooden cleats with CP brass

screws and washerswith 40 mm wide teak wood frame as per

NS design including polishing Sqm 49.7 2,404 119,497.04

12 Providing and fixing Stainless Steel A ISI 304 (18/8) kitchen sink

as per IS:13983 with C.I. brackets and stainless steel plug 40

mm, including painting of fittings and brackets, cutting and

making good the walls wherever required :

17.10.1 Kitchen sink with drain board

13 Providing & fixing, testing and commissioning of storage type

electric water heater with automatic thermostatic control

electric element, pressure release valve, brackets fixed to

expansion fasteners with M.S. nuts and bolts all complete

including cutting and making good the walls wherever

25 litres capacity (Horizontal /Vertical type1.5 kw electrical

14 Providing & fixing 15 mm dia C.P. brass bib cock with Hose

NS union of approved quality. Each 48 1,372 65,870.40

15 Providing & fixing 15 mm dia C.P. brass bib cock with C.P.

NS wall flange of approved quality. Each 24 1,674 40,176.85

i. Detail of Sanitary fixture are for the information of the

Contractor,however model/makes of all sanitary fixtures shall

be selected by Architect/Interior designer/Project manager

and the same shall be binding for execution.

ii. No additional fixing cost shall be paid for change in type of

sanitary fixtures.

iii. Contractor to receive all the above mentioned items & store

at place as directed at site.

TOTAL CARRIED OVER TO SUMMARY 207,360.00 2,214,586.38

SUB HEAD B: WATER SUPPLY

SL. DSR - DSR Rate NS Rate DSR Amount

DESCRIPTION OF ITEMS UNIT Qty Amount

Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes,

having thermal stability for hot & cold water supply, including all

CPVC plain & brass threaded fittings, including fixing the pipe with

clamps at 1.00 m spacing. This includes jointing of pipes & fittings

with one step CPVC solvent cement and testing of joints complete

as per direction of Engineer in Charge.

Internal Work - Exposed on Wall

18.7.2 20 mm nominal dia pipes. Metre 150.00 325.10 48,765.00

18.7.5 40 mm nominal dia pipes. Metre 50.00 674.35 33,717.50

18.7.6 50 mm nominal dia pipes. Metre 50.00 927.00 46,350.00

Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes,

having thermal stability for hot & cold water supply, including all

CPVC plain & brass threaded fittings, i/c fixing the pipe with

clamps at 1.00 m spacing. This includes jointing of pipes & fittings

with one step CPVC solvent cement and the cost of cutting

chases and making good the same including testing of joints

complete as per direction of Engineer in Charge.

Concealed work oncluding cutting chases and making good the

18.8.2 20 mm nominal dia pipes. Metre 504.00 513.75 258,930.00

18.8.3 25 mm nominal dia pipes. Metre 400.00 626.05 250,420.00

18.8.4 32 mm nominal dia pipes. Metre 150.00 712.75 106,912.50

Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes,

having thermal stability for hot & cold water supply including all

CPVC plain & brass threaded fittings This includes jointing of pipes

& fittings with one step CPVC solvent cement, trenching, refilling &

testing of joints complete as per direction of Engineer in Charge.

18.9.4 32 mm nominal dia Pipes Metre 50.00 435.05 21,752.50

18.9.5 40 mm nominal dia Pipes Metre 50.00 559.20 27,960.00

18.9.6 50 mm nominal dia Pipes Metre 80.00 811.85 64,948.00

18.9.9 100 mm nominal dia Pipes Metre 140.00 2,811.75 393,645.00

Providing and fixing brass stop cock of approved quality

3 18.16 complete.

Providing and fixing gun metal gate valve with C.I. wheel of

4 18.17 approved quality (screwed end):

Providing and fixing C.P. bass angle valve for basin mixer and

geyser points of approved quality conforming to I.S:8931.

Providing and fixing unplasticised P.V.C connection pipe with

PTMT Nuts coller and bush of approved quality and colour.

18.74.2 15mm nominal bore with 45cm length Each 96.00 107.90 10,358.40

Sub-Total of Water Supply Installation, Separate for Scheduled & Non-Scheduled Items 1,365,912.10

SUB HEAD C: INTERNAL DRAINAGE (SOIL, WASTE & VENT PIPES)

SL. DSR - DSR Rate NS Rate DSR Amount NS Amount

DESCRIPTION OF ITEMS UNIT Qty

Providing and fixing trap of self cleansing design with screwed down

or hinged grating with or without vent arm complete, including cost of

cutting and making good the walls and floors

17.60.1 100 mm inlet and 100 mm outlet

17.60.1.1 Sand cast iron S&S as per IS: 3989 Each 48 1,604.10 76,996.80

2 17.35 Providing and fixing soil, waste and vent pipes.

Centrifugally cast (spun) iron socket & spigot (S&S) pipe as per IS: 3989

17.35.2 75 mm diameter

17.35.2.2 Centrifugally cast (spun) iron socketed pipe as per IS: 3989 Metre 240 1,042.10 250,104.00

Providing and fixing single equal plain junction of required degree

with access door, insertion rubber washer 3 mm thick, bolts and

3 17.43 nuts complete.

17.43.1.2 Sand cast iron S&S as per IS - 3989 Each 165 731.40 120,681.00

17.43.2.2 Sand cast iron S&S as per IS - 3989 Each 45 573.80 25,821.00

4 17.44 Providing and fixing single equal plain junction of reqd. degree.

17.44.1.2 Sand cast iron S&S as per IS - 3989 Each 125 707.30 88,412.50

17.44.2.2 Sand cast iron S&S as per IS - 3989 Each 45 498.90 22,450.50

Providing and fixing bend of required degree with access door,

5 17.38 insertion rubber washer 3mm thick, bolts and nuts complete.

17.38.1.2 Sand cast iron S&S as per IS - 3989 Each 45 597.60 26,892.00

17.38.2.2 Sand cast iron S&S as per IS- 3989 Each 45 453.40 20,403.00

6 17.39 Providing and fixing bend of required degree .

17.39.1.2 Sand cast iron S&S as per IS : 3989 Each 165 439.75 72,558.75

17.39.2.2 Sand cast iron S&S as per IS - 3989 Each 45 298.20 13,419.00

7 17.57 Providing and fixing collar.

17.57.1.2 Sand cast iron S&S as per IS - 3989 Each 55 439.75 24,186.25

17.57.2.2 Sand cast iron S&S as per IS - 3989 Each 45 271.45 12,215.25

Providing and fixing M.S. holder-bat clamps of approved design to

Sand Cast iron/cast iron (spun) pipe embedded in and including

cement concrete blocks 10x10x10 cm of 1:2:4 mix (1 cement : 2 coarse

sand : 4 graded stone aggregate 20 mm nominal size), including cost

of cutting holes and making good the walls etc.

Providing and laying cement concrete 1:5:10 (1 cement : 5 coarse

sand : 10 graded stone aggregate 40 mm nominal size) all-round

S.W. pipes including bed concrete as per standard design.

19.2.1 100 mm diameter S.W. pipe Metre 120 895.50 107,460.00

Providing and fixing G.I. Pipes complete with G.I. Fittings and clamps.

10 18.10 including cutting and making good the walls etc.

18.10.4 32 mm nominal bore Metre 230 563.60 129,628.00

18.10.5 40 mm nominal bore Metre 45 725.15 32,631.75

18.10.6 50 mm nominal bore Metre 170 893.20 151,844.00

Painting G.I. Pipes and fittings with two coats of anticorrosive

11 18.40 bitumastic paint of approved quality

18.40.4 32 mm nominal bore Metre 280 18.40 5,152.00

18.40.5 40 mm nominal bore Metre 45 20.95 942.75

18.40.6 50 mm nominal bore Metre 160 25.25 4,040.00

Painting sand cast iron/ centrifugally cast (spun) iron soil, waste

vent pipes and fittings with two coats of synthetic enamel paint of

any colour such as chocolate grey, or buff etc. over a coat of primer

(of approved quality) for new work

17.65.1 100 mm diameter pipe Metre 240 69.55 16,692.00

17.65.2 75 mm diameter pipe Metre 240 52.90 12,696.00

Providing lead caulked joints to sand cast iron/centrifugally cast(spun)

13 17.58 iron pipes & fittings of diameter :.

Providing & filling the joints with spun yarn,cement slurry & cement

14 17.36 mortar 1:2(1 cement: 2 fine sand) in SCI/CI pipes.

Providing and fixing single unequal plain junction of reqd. degree.

17.48.1.2 Sand cast iron S&S as per IS - 3989 Each 45 841.10 37,849.50

Sub-Total of Drainage Installation, Separate for Scheduled & Non-Scheduled Items 1747585.80 0.00

BOQ FOR ELECTRICAL WORKS

2018 DSR NDSR NDSR

Sr. No. Description Unit Quantity DSR Rate DSR Amount

No. Rate Amount

Wiring for light point/ fan point/ exhaust fan point/ call bell

point with 1.5 sq.mm FRLS PVC insulated copper conductor

single core cable in surface / recessed steel conduit, with

1 modular switch, modular plate, suitable GI box and earthing the

point with 1.5 sq.mm FRLS PVC insulated copper conductor

single core cable etc. as required.

Rewiring for light point/ fan point/ exhaust fan point/ call bell

point with 1.5 sq.mm FRLS PVC insulated copper conductor

2 single core cable and 1.5 sq.mm FRLS PVC insulated copper

conductor single core cable as earth wire in existing surface/

1.15 recessed steel/PVC conduit including dismantling as required.

Wiring for light/ power plug with 2X4 sq. mm FRLS PVC

insulated copper conductor single core cable in surface/

3 recessed steel conduit alongwith 1 No. 4 sq. mm FRLS PVC

insulated copper conductor single core cable for loop earthing

1.5 as required. metre 450 265.00 119,250.00

Wiring for light/ power plug with 4X4 sq. mm FRLS PVC

insulated copper conductor single core cable in surface/

4 recessed steel conduit alongwith 2 Nos. 4 sq. mm FRLS PVC

insulated copper conductor single core cable for loop earthing

1.6 as required. metre 25 392.00 9,800.00

Wiring for circuit/ submain wiring alongwith earth wire with the

5 following sizes of FRLS PVC insulated copper conductor, single

1.7 core cable in surface/ recessed steel conduit as required.

1.7.1 2 X 1.5 sq. mm + 1 X 1.5 sq. mm earth wire metre 25 208.00 5,200.00

Supplying and drawing following sizes of FRLS PVC insulated

6 copper conductor, single core cable in the existing surface/

1.17 recessed steel/ PVC conduit as required.

Supplying and fixing suitable size GI box with modular plate and

cover in front on surface or in recess, including providing and

7 fixing 6 pin 5/6 & 15/16 A modular socket outlet and 15/16 A

1.32 modular switch, connections etc. as required. Each 192 495.00 95,040.00

Supplying and fixing of following sizes of steel conduit along

with accessories in surface/recess including painting in case of

8 1.20 surface conduit, or cutting the wall and making good the same

in case of recessed conduit as required.

Supplying and fixing of following sizes of medium class PVC

conduit along with accessories in surface/recess including

9 cutting the wall and making good the same in case of recessed

1.21 conduit as required.

Supplying and fixing two module stepped type electronic fan

10 regulator on the existing modular plate switch box including

1.25 connections but excluding modular plate etc. as required. each 72 342.00 24,624.00

Supplying and fixing modular blanking plate on the existing

11 modular plate & switch box excluding modular plate as

Supplying and fixing following size/ modules, GI box alongwith

12 modular base & cover plate for modular switches in recess etc.

1.27 as required.

Supplying and fixing following modular switch/ socket on the

13 existing modular plate & switch box including connections but

1.24 excluding modular plate etc. as required.

c 1.24.4 3 pin 5/6 A socket outlet each 144 111.00 15,984.00

d 1.24.5 6 pin 15/16 A socket outlet each 80 175.00 14,000.00

e 1.24.6 Telephone socket outlet each 73 119.00 8,687.00

Supplying and fixing 20 A, 240 V, SPN Industrial type socket

outlet, with 2 pole and earth, metal enclosed plug top

alongwith 20 A "C" curve, SP, MCB, in sheet steel enclosure, on

14 surface or in recess, with chained metal cover for the socket out

let and complete with connections, testing and commissioning

2.18 etc. as required. each 4 1,232.00 4,928.00

Supplying and fixing following way, single pole and neutral,

sheet steel, MCB distribution board, 240 V, on surface/ recess,

15 complete with tinned copper bus bar, neutral bus bar, earth

bar, din bar, interconnections, powder painted including

2.3 earthing etc. as required. (But without MCB/RCCB/Isolator)

a 2.3.1 6 way , Double door Each 6 1,661.00 9,966.00

b 2.3.2 8 way , Double door Each 6 1,760.00 10,560.00

Supplying and fixing 5 A to 32 A rating, 240/415 V, 10 kA, "C"

curve, miniature circuit breaker suitable for inductive load of

16 following poles in the existing MCB DB complete with

2.10 connections, testing and commissioning etc. as required.

Supplying and fixing following rating, double pole, 240 V,

17 isolator in the existing MCB DB complete with connections,

2.12 testing and commissioning etc. as required.

SITC of 1200mm sweep, BEE 5 star rated, ceiling fan with brushless direct

current (BLDC) moter, class of insulation: B, 3 no. blades, 30 cm long down

rod, 2 nos canopies, shakel kit, safety rope, copper winding, power factor

not less than 0.9, service value minimum 6.85, air delivery minimum 215

CMM, 350 RPM (tolerance as per IS:374-2019), THD less than 10% remote or

electronic regulator unit for speed control and all remaining accessories

including safety pin, nit bolts, washers, temperature rise = 75 degree C

(max.), insulation resistance more than 2 mega ohm, suitable for 230 V, 50

MR Hz, single phase AC supply, earthing, etc. complete as required. each 72 1,988 143,103.97

SITC of 18-20W, 1.2m wall mounted LED batten with aluminium housing and

19 integrated electronic diverters as required.

20 SITC of 12 W, surface mounted LED downlighter with white powder coated

MR aluminium housing with integrated electronic driver etc. as required. each 72 802 57,745.32

21 SITC of 380,, 900 RPM heavy duty exhaust fan with metallic blades woth

MR louvers/ shutters suitable for 220/240 V opration complete etc. as required. each 48 1,206 57,870.94

Supply of 1100V grade armoured cable having sector / circular shaped

aluminium / copper conductor PVC insulated cores under ground PVC

tape wrapped inner sheathed, GI strip / wire armoured and overall extruded

PVC sheathed confirming to IS: 1554, laid on wall or ceiling using GI clamps

and spacers as per route shown at site and further as directed by Engineer-

8.4 Laying of one number PVC insulated and PVC sheathed / XLPE power cable

of 11 KV grade of following size in the existing masonry open duct as

8.4.2 Above 120 sq. mm and upto 400 sq. mm Meter 50 96.00 0.00

Supplying and making end termination with brass compression

gland and aluminium lugs for following size of PVC insulated

23 and PVC sheathed / XLPE aluminium conductor cable of 1.1 KV

9.1 grade as required.

BILL OF QUANTITIES :DG WORKS

S.NO. DESCRIPTION UNIT QTY AMOUNT AMOUNT

1.1 Supply, erection, testing & commissioning complete in all respect following sizes of

DG Sets in acoustic ( sound proof /weather proof) enclosure as per CPCB norms. -

415 Volts, 3 phase, 50 Hz, 1500 RPM AC alternator coupled with radiator cooled

Diesel Engine complete with all accessories, like self starting device, fly wheel

coupling with guard V belts, radiator with fan, residential type silencers with exhaust

piping, instrument panel comprising of switch with key, battery charging ammeter,

safety control for lube oil pressure and high cooling water temperature with

tripping, high enclosure temperature, emergency stop push button outside the

enclosure, first filling of Engine oil, Gear oil etc. The alternator insulation shall be class

'H' suitable to with stand tropical conditions and shall generally comply with BS 5000

and IS 4722. The over load capacity shall not be less than 110% of rated capacity

for 1 hour in every 12 hours. 24 Volt chargeable battery set complete with suitable

trickle/boost chargers and SMF batteries, battery stand / tray .

The DG set shall be mounted on a fabricated rigid common base frame with anti

vibration mounting to provide not less than 99% vibration isolation.

The DG Set shall include all standard accessories fittings including in built oil tank

with lockable fuel inlet facility and instruments manuals etc. complete as per

required. The vendor shall supply the set with first fill of fuel (HSD).

A suitable forced air circulation and ventilation system shall be provided inside the

acoustic enclosure to meet air requirement for engine aspiration, combustion and

cooling / heat removal to maintain safe operating temperature inside the acoustic

a) 125KVA (with acoustic enclosure) Set 1.00 Rs. 1,300,000 Rs. 1,300,000

DG Sets shall be suitable for Auto operation as well as manual operation.

DG sets shall be supplied with controller to have AMF feature in addition to

metering and protections of Alternator and Engine.

DG Sets shall have provision for remote start/stop and remote monitoring of DG fault

1.2 Supply, installation, testing & commissioning of 990 litre oil tank fabricated from 2.5

mm MS sheet complete with all required accessories like man hole cover, air

breather, level indicator, supply & return flange, over flow flange, drain with flange,

stand & lifting hooks etc. complete as required. Set 1 Rs. 15,000 Rs. 15,000

1.3 EXHAUST SYSTEM:

Supply, erection, testing & commissioning of exhaust piping including bends, elbow,

y piece, flanges etc. as required of following sizes with thermally insulated by 75 mm

thick layer of mineral wool (150 kg/m3 density) lagging with chicken mesh and

24SWG aluminium sheet wrapping over the exhaust pipes complete as required. MS

supports like C channels, Angles, Strips etc. shall be paid on Kg basis under different

a) 125 mm dia. 4.85 mm thick MS Pipe Mtr 15 Rs. 4,000 Rs. 60,000

b) Supply and installation of SS Flexible Bellows. Nos. 2 Rs. 8,500 Rs. 17,000

1.4 Supply & erection of thermal insulation of Silencer by 75 mm thick layer of mineral

wool (150 kg/m3 density) lagging with chicken mesh and 24SWG aluminium sheet

wrapping over the silencer complete as required.

a) For 125KVA DG Silencer Set 1 Rs. 15,000 Rs. 15,000

1.6 OIL HAND PUMP

Supply, installation of hand barrel pump to pump the HSD fuel from barrels to the

day oil tank with flexible hose pipe etc. No. 1 Rs. 3,500 Rs. 3,500

1.7 DG exhaust support structure :

Supply, fabrication and installation of silencer and exhaust pipe support structure

comprising of ISMCs, ISAs, MS plates, flats, rods, foundation bolts etc for supporting

exhaust pipes. The rate shall include painting with 2 primer coats of red oxide and

two finishing coats of approved enamelled paint. Kg 500 Rs. 80 Rs. 40,000

1.9 APPROVAL OF STATUTORY AUTHORITY:

Preparation of drawings/documents in required sets to be submitted to statutory

authority, obtaining approval/permission for operation of DG sets as standby

source, including Liasoning and getting NOC from Pollution Control Board / any

other authority complete as required. LS LS Rs. 50,000 Rs. 50,000

Foundation work for DG sets is not part of DG Set supplier. However the foundation

dwgs shall be provided by DG set supplier. In addition, foundation bolts / insert

plates etc. if any shall be supplied by DG supplier.

Any item not mentioned above but required to complete the DG set work shall be

included in the quote. No extra payment shall be payable on this account.

TOTAL OF DG Rs. Rs. 1,500,500