Loading…
Loading…
| # | Company | Quoted % | Amount | Rank | Status |
|---|---|---|---|---|---|
| 1 | L1₹4.7 LAdmitted-Finance | +10.00% | ₹4.7 L | L1 | Admitted-Finance |
| 2 | L2₹4.9 LAdmitted-Finance | +15.00% | ₹4.9 L | L2 | Admitted-Finance |
Tender Value
₹4.3 L
EMD Value
₹8,600
Closing Date
28 Apr 2026, 1:00 pmClosed
Er Parvez Malik
PWD Div Jammu East
Day to day maintenance of Guest House, including lobies, Dinning Hall , Kitchen by way of providing sanitary fittings, hardware fittings, finishing works, painting, polishing, wood work, repair work to civil and interiors and other allied and emergen
2026_PWDJK_308447_1
06 of 2026-2027 dated 22-04-2026
Open Tender
Civil Works
365 days
Mumba
Please refer Tender documents.
3 documents required · 3 mandatory
₹600
as per NIT
₹8,600
30 Apr 2026
22 Apr 2026
28 Apr 2026
22 Apr 2026
28 Apr 2026
22 Apr 2026
This is a percentage-rate BOQ. The schedule below shows estimated quantities and rates. Bidders quote a single percentage above or below the total estimated cost.
| Sl No | Description | Qty | Unit | Est. Rate | Est. Amount |
|---|---|---|---|---|---|
| 1Steel work welded in built up sections/framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer using structural steel etc. as required. In gratings, frames, guard bar, ladder, railings, brackets, gates and similar works | |||||
| 2Providing and fixing false ceiling at all height including providing and fixing of frame work made of special sections, power pressed from M.S sheets and galvanized with zinc coating of 120 gms/sqm (both side inclusive) as per IS:277 and consisting of angle cleats of size 25 mm widex1.6mm thick with flanges of 27mm and 37 mm, at 1200 mm centre to centre, one flange fixed to the ceiling with dash fastener 12.5 mm diax40mm long with 6 mm dia bolts, other flange of cleat fixed to the angle hangers of 25x10x0.5mm of required length with nuts & bolts of required size and other end of angle hanger fixed with G.I. channels 45x15x0.9 mm running at the spacing of 1200 centre to centre, to which the ceiling section 0.5mm thick bottom wedge of 80mm with tapered flanges of 26 mm each having clips of 10.5 mm at 450mm centre to centre, shall be fixed in a direction perpendicular to G.I. intermediate channel with connecting clips made out of 2.64mm diaX230 mm long G.I. wire at every junction, including fixing perimeter channels 0.5mm thick 27mm high having flanges of 20mm and 30 mm long, the perimeter of ceiling fixed to wall/partition with the help of rawl plugs at 450 mm centre to centre, with 25mm long drive-all screws @ 230 mm interval ,including fixing of gypsum board/calcium silicate board to ceiling section and perimetre channel with the help of dry wall screws of size 3.5x25mm at 230mm c/c, including jointing and finishing to a flush finish of tapered and square edges of the gypsum board with recommended jointing compound, jointing tapes, finishing with jointing compound in 3 layers covering upto 150mm on both sides of joint and two coats of primer suitable for board, all as per manufacturers’ specification and also including the cost of making openings for light fittings, grills diffusers, cutouts made with frame of perimetre channels suitably fixed all complete as per drawing and specification and direction of the Engineer-in-Charge but excluding the cost of painting with: 12.5 mm thick tapered edge gypsum fire resistant board conforming to IS: 2095- Part-I : 2011 (Board with BIS certification marks) 12.5 mm thick tapered edge gypsum moisture resistant board | |||||
| 3Supplying chemical emulsion in sealed containers including delivery as specified. Chlorophriphos / Lindane emulsifiable concentrate of 20% | |||||
| 4Diluting and injecting chemical emulsion for POST-CONSTRUCTIONAL antitermite treatment Treatment of soil under existing floors using chemical emulsion (Chlorophriphos/Lindane E.C. 20% with 1% concentration) @ one litre per hole, 300mm apart including drilling 12 mm diameter holes and plugging with cement mortar 1:2 (1 cement :2 coarse sand) to match the existing floor: | |||||
| 5Repair of Tiles by way of removing broken tile pieces and replacing it with new one along with mortar below, grinding and polishing complete job. Repair area less than 1.8 sqm. | |||||
| 6Repair of Bed along with necessary ply changing/ legs replacement alon with necessary fixing with fevicol and nails etc complete job. | |||||
| 7Repair of Side Table along with changing of drawer channels with necessary fixing with polishing, fevicol and nails etc complete job. | |||||
| 8Labour engaged for cleaning of roofs & courtyard area of staff qtrs. By collecting leaves and other waste material and disposal of same within 50 mtrs. lead | |||||
| 9Engaging carpenter for day to day repairs to woodwork like doors, windows etc | |||||
| 10Engaging welder for day to day repairs like doors, windows etc | |||||
stage.html
html • 0.03 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Tendernotice_1.pdf
PDF • 0.98 MB
BOQ_999572.xls
BOQ • 0.28 MB
Download all tender documents and submit your bid