Composite upgradation work of Conference room, Exhibition hall and Entrance lobby of FIPLY building including Civil, Electrical, Mechanical, Audio Video, Physical protection system and miscellaneous civil works of sea side buildings, North SIte, BARC

Amount

Part A- Civil work Dismantling doors, windows and clear storey openings (steel / wood) shutter including chowkhats, architraves, holdfasts etc. complete and stacking within 100 m lead (full windows) Of area 3.00 Sq.M and below

Dismantling Aluminium / Gypsum partitions, /panelling, doors, windows, fixed glazing and false ceiling including disposal of unserviceable surplus material and stacking of serviceable materials within 100 m lead as directed by the Engineer-in-charge.

Dismantling of existing wall panelling including laminate, plywood, frame work and others, completely including disposal of unserviceable material and stacking of serviceable materials within 150 m lead as directed by the Engineer-in-charge. Note : Removal of wooden panelling with aluminium/wooden frame of conference room and exhibition hall will measured in this item.

Dismantling tile work in floors and roofs laid in cement mortar including stacking material within 100 m lead For thickness of tiles above 10 mm and up to 25 mm . Note : Bedding mortar also to be removed along with tiles.

Dismantling old plaster / skirting carefully , raking out joints and cleaning the surface for plaster including disposal of rubbish to the dumping ground within 100 m lead

Dismantling steel work in single sections including dismantling and stacking within 100 m lead In R.S Joists, Angles etc.

Dismantling plain cement concrete manually / by mechanical means carefully without damaging adjacent structures including disposal of debris within 200 m lead as per direction of Engineer-in-charge

Dismantling / Removing of of MS/GI/ other material HVAC duct of various sizes (200mm to 2000 mm) alongwith fittings, supports, wrapped insulation materials including scaffolding, cutting, stacking, removing of insulated materials from duct and transporting upto 5 km lead (TVS store)and as directed by Engineer in charge. Note : 1) Insulated materials and metal duct materials will seperately dispose off/stack in TVS store. 2) Transporting upto 5 km lead (TVS store) will be paid under relevant item.

Providing and laying 3mm thick Plastic sheet of approved make over existing flooring for protection from scratches while construction including duct taping if required and as directed by Engineer in Charge. Cost shall include removal and stacking of the sheets after required time and submitting to the department.

Fabrication, supply and installation of wall panelling, over aluminium frame work (50/60mm x 50mm x 1.2 @ 600mm c/c including SS screws), fixing of acquostic membrane, 12mm thick cement board, 6mm thick fire rated plywood and 1.5 mm thick laminate of approved colour and shade including making groove 3mm etc all as per approved shop drawing and technical specification and as per instruction of Engineer -in Charge. Note : 1. Drawings provided by CED are conceptual drawings. Detail Shop drawings to be prepared by contractor and get concured by Architect /Engineer in charge before execution of works. 2. Acoustic membrane, Cement board, Fire rated plywood & laminates, scaffolding are included in this item rate and no extra payment for wasteage/any item. 3. Aluminium frame work will be paid in respective item.

Providing and fixing acoustic insulation treatment to the dry wall in premises using high performance acoustic insulation sheets of 4 mm high density mass loaded sound barrier sheet ,along with other accessories and fixtures etc., all complete as per the manufacturer's specification, the laying of the acoustic treatment shall be done by the authorized applicator of the manufacturer of acoustic sheets: Area thickness tolerance of less than 10% and length and width tolerances of less than 5%. It boasts a nominal mass over 7.2 Kg/m² and a density greater than 1800 Kg/m³. It meets Euroclass B s1 d0 fire standards and provides significant sound and insulation improvements. Environmentally, it contains 15% recycled raw material, with 60% post-consumer content, and emits 50 µg/m³ VOCs, . Front Elevation, one side only no wastage to be added (No overlaps to be provided).

Acoustic Infill - 50mm thick rock wool of 48kg/m3 density or 50mm thick 1000 GSM polyester wool insulation As an acoustic requirement, contractor to affix of 50mm thick of acoustic infill insulation of density 48 kg/m3 or 1000 GSM of approved make wrapped in RP tissues suitably affixed to partition framework using necessary Holding Clips, GI binding wire, duct tape as indicated in the drawing, complete in all respect as directed by the Architect/ Engineer in Charge.

Providing and fixing heavy duty weather resistent cement board of 12mm thickness, in specified size including necessary fixing in position at levels as per drawing etc complete as per ASTM C-1185 and ISO-8336(part E), rate enclusive of fixing all necessary SS fastners/screws/bolt etc and as directed by Engineer in Charge.

Providing and fixing 6 mm thick marine ply in position on frame work including all materials, labour etc complete in all as per specification drawings and as directed by the Engineer in Charge.

Providing and fixing decorative high pressure 1.5 mm thick laminated sheet of plain / wood grain in gloss / matt/ suede finish with high density protective surface layer and reverse side of adhesive bonding quality conforming to IS:2046 Type S including cost of adhesive, labour etc. complete as directed by Engineer in Charge. (may be two or more colour required as per drawings)

Providing and Fixing of fluted wooden panels of 150mm wide, 25mm thick, 2700 mm Length Acoustic Real Solid flutted vineer finish of approved colour and shade thermo-treated wooden panels, with tongue and groove joints, fixed with aluminium Z bar, over 50mm X 25mm anodised aluminium framework, with Polywool infill and acoustic fleece, complete in all respects, as per Architect/Engineer in Charge.

Acoustic Fabric Wall Panelling - Providing and Installation of Acoustic panelling of approved colour choice, in differnt panel size, hardened square/Radius/Bevel edge with wrapped glass fibre core panel, density 96 kg/m3 of size as per drawing (thickness 25mm), installed by using compitable GI strut& Z bars.The GI strut systems includes compitable Cross channel having thickness 0.45mm, knurled web40, depth 10mm and equal flanges 15mm is fastened to wall positioned vertically in a regular manner at 600mm c/c. GI Z bars having 40mm height, thickness 1.2mm is first fixed behined the panels by identifying resin spots by using suitable fasteners. Clean exposed surfaces of wall ensure wall are in plumb line before installing cross channel on wall. Provide necessary packing shims (if required). The square edge panels are then slided into the Z bars fixed on wall with approved decorative acoustical fabric colour as per Detailed Technical Specifications, drawing and as instructed by Engineer in Charge.

Providing and fixing false ceiling in Conference room - Providing and fixing perforated Linear Aluminium False Ceiling of 0.7mm thick in Wood Grain Finish alongwith mineral wool pad. The size of panel is 300mm x 2400mm with bevel edged. Panel is to be perforated (1.5mm diameter to 1.8mm diameter) i.e between 21 % to 23% (open area) having acoustic fleece at the back or acoustic tissue glues over the whole perforated area and laying of 25mm thick mineral wool pad (wrapped ) with a density 16 kg/m3 over false ceiling panel. Panels is to be double baked and roll including finishing coat minimum 20 micron or Powder coated, minimum 60 micron. Aluminium panel shall be chromatized for maximum bond between metal and paint enamel twice under high tempeture. Panel shall be clipped to a baked enamelled aluminium carrier of 41.5 mm wide x 62 mm deep x 0.95 mm thick or hooked on to a secondary grid aluminium carrier installed at shorter side of the panel. A primary grid of perforated L- Angle in 30x30x1.2mm thick galvanized steel is installed perpendicularly to hook on profiles at maximum centers at 1200mm. Panel carrier /entire ceiling shall be suspended with M6 threaded rod using M6 fastener. The suspension system shall be as per manufacturer specification. The panels shall include the site cutting / making openings for services e.g. lights for information boards, smoke detectors, speakers, diffusers, grills etc. Measurement to be done on edge to edge basis without any deductions of light or any other services integrated within the false ceilings complete as per drawings, specification, extra support for panel/carrier and as directed by Engineering-in-charge.

Providing and fixing false ceiling in exhibition area - Providing and fixing perforated Linear Aluminium False Ceiling of 0.7mm thick in approved colour and shade with mineral wool pad. The size of panel is 300mm x 2400mm with bevel edged. Panel is to be perforated (1.5mm diameter to 1.8mm diameter) i.e between 21 % to 23% (open area) having acoustic fleece at the back or acoustic tissue glues over the whole perforated area and laying of 25mm thick mineral wool pad (wrapped ) with a density 16 kg/m3 over false ceiling panel. Panels is to be double baked and roll including finishing coat minimum 20 micron or Powder coated, minimum 60 micron. Aluminium panel shall be chromatized for maximum bond between metal and paint enamel twice under high tempeturePanel shall be clipped to a baked enamelled aluminium carrier of 41.5 mm wide x 62 mm deep x 0.95 mm thick or hooked on to a secondary grid aluminium carrier installed at shorter side of the panel and A primary grid of perforated L- Angle in 30x30x1.2mm thick galvanized steel is installed perpendicularly to hook on profiles at maximum centers at 1200mm. Panel carrier /entire ceiling shall be suspended with M6 threaded rod using M6 fastener. The suspension system shall be as per manufacturer specification. The panels shall include the site cutting / making openings for services e.g. lights for information boards, smoke detectors, speakers, diffusers, grills etc. Measurement to be done on edge to edge basis without any deductions of light or any other services integrated within the false ceilings complete as per drawings, specification, extra support for panel/carrier and as directed by Engineering-in-charge.

Providing and Fixing false ceiling in Exihibition Area - Linear Al 0.7mm thick Perforated Baffle Ceiling with acoustic fleece: Vertical baffle system, exhibiting space-delineating characteristics as well as acoustic feature as 20 % perforation with approved colour and shade. The system comprises baffles 25mm wide & 100mm Deep with acoustic fleece (black colour) @75mm c/c above false ceiling , installed at 75mm clear gap between the baffle panels. The carrier rails run perpendicular to the baffles. Individual baffle lengths between 300 and 2400 mm as per instruction of Architect. Baffle ceiling are supplied with the end cap matching the similar finish of baffle. Tolerances according to TAIM, DIN EN 13964 and quality controlled to ISO 9001:2008 approved by TUV. Substructure for Vertical baffle system consisting of U shaped galvanized slotted carriers 1.5mm Thick installed perpendicularly to baffles at maximum 1200mm centres using cross connectors. The primary profiles must be connected to one another with longitudinal splice connectors. The entire ceiling module shall be suspended with 6mm diameter galvanized steel threaded rods from the true ceiling with officially approved anchor fasteners maximum at 1200mm Centres as per the requirements of DIN EN 13964 and the statics of the system. Ensure horizontal and flush alignment during installation, complete as per drawing, manufacture specification and as per instruction of Engineer in Charge. Ceiling in approved colour finish

Providing and fixing false ceiling in Corridor area - Providing and fixing unperforated Linear Aluminium False Ceiling of 0.7mm thick in approved colour and finish. The size of panel is 300mm x 2100mm with bevel edged. Panels is to be double baked and roll including finishing coat minimum 20 micron or Powder coated, minimum 60 micron. Aluminium panel shall be chromatized for maximum bond between metal and paint enamel twice under high tempeturePanel shall be clipped to a baked enamelled aluminium carrier of 41.5 mm wide x 62 mm deep x 0.95 mm thick or hooked on to a secondary grid aluminium carrier installed at shorter side of the panel and A primary grid of perforated L- Angle in 30x30x1.2mm thick galvanized steel is installed perpendicularly to hook on profiles at maximum centers at 1200mm. Panel carrier /entire ceiling shall be suspended with M6 threaded rod using M6 fastener. The suspension system shall be as per manufacturer specification. The panels shall include the site cutting / making openings for services e.g. lights for information boards, smoke detectors, speakers, diffusers, grills etc. Measurement to be done on edge to edge basis without any deductions of light or any other services integrated within the false ceilings complete as per drawings, specification, extra support for panel/carrier and as directed by Engineering-in-charge.

False ceiling in Conference room and Entrance Lobby - Providing and fixing in position suspended seamless false ceiling system using 12 mm thick calcium silicate boards 100% humidity resistance, incombustible as per BS476 part IV with thermal conductivity of 0.043 w/m KC placed in a suspended grid of size of 600x 600mm made of hot-dipped G.I steel sections wherein the ceiling sections of 0.55 mm thick shall be suspended at 1200 mm centres along the length of ceiling with 4mm dia G.I wires/ 1 mm thick strip hangers made of G.I sheet sections with necessary level adjusters and inter channels of 0.90mm thick with connecting clips and resting on the perifery walls on wall angles of 0.55 mm thickness including providing necessary openings for light fixtures, diffusers, trap doors etc to be made as per layout drawings and as per directions of Engineer-in-charge The main tees to be suspended from the ceiling/ soffit with the help of metal dash fastners of 6mmx50mm, soffit clits of 25mmx35mmx1.60mm and 4mm dia G.I wire with galvanised spring steel levelling clips/ G.I strip Hangers at 600mm centers .The entire grid system shall be designed to bear a distributed load of minimum 25 kg/Sq.m, complete as per drawing, specification and Engineer in Charge instructions. (Only calcium silicate false ceiling area will be measured for the purpose of payment)

Providing and Fixing false ceiling in Entrance Lobby - Linear Al 0.7mm thick Perforated Baffle Ceiling System in Wood Grain finish: Vertical baffle system, exhibiting space-delineating characteristics as well as acoustic feature as 20 - 25% perforation. The system comprises baffles 25mm wide & 100mm Deep, installed at 75mm clear gap between the baffle panels. The carrier rails run perpendicular to the baffles. Individual baffle lengths between 300 and 2400 mm as per instruction of Architect. Baffle ceiling are supplied with the end cap matching the similar finish of baffle. Tolerances according to TAIM, DIN EN 13964 and quality controlled to ISO 9001:2008 approved by TUV. Substructure for Vertical baffle system consisting of U shaped galvanized slotted carriers 1.5mm Thick installed perpendicularly to baffles at maximum 1200mm centres using cross connectors. The primary profiles must be connected to one another with longitudinal splice connectors. The entire ceiling module shall be suspended with 6mm diameter galvanized steel threaded rods from the true ceiling officially approved anchor fasteners maximum at 1200mm Centres as per the requirements of DIN EN 13964 and the statics of the system. . Ensure horizontal and flush alignment during installation, complete as per drawing, manufacture specification and as per instruction of Engineer in Charge. Ceiling in approved colour finish

Providing and fixing, lay in False Ceiling 600 x 600mm unperforated corrosion resistant aluminium magnesium alloy metal panel fixed in 24 mm 'T' Frame work of Module 600 x 600 mm. Panels shall be metal panel of size 575 mm x 575 mm of approved colour in 0.70 mm thick Aluminium Alloy 3105 with square edges Tiles to be stove enamelled on a continuous application for pre-treatment. The coils to be go through 4 stages of pre treatment Three times of oven baked through conversion coating , priming and finish coat ensuring superior adhesion, high corrosion resistance and good colour stability.The coils to be painted on both sides after degreasing. Inside surface to have a primer of 5 microns and a coat of natural colour of 5 microns, exposed surface to have a primer of 5 microns, binder of 5 microns and a topcoat of approved colour 15 microns. Grid system for fixing ceiling tiles shall comprise of tees. The 24 mm main tee runers shall be suspended at an interval of 1200 mm centre to centre. The 24 mm cross tee runner shall be suspended at an interval of 600 mm centre to centre and further supported with 24 mm cross tee with inter locking arrangements to form a Grid of 600 mm x 600 mm. The main tee shall be supported by means of 4 mm G.I.rod from slab / roof. The suspension shall be provided at 1200 to 1500 mm centre to centre.provision for lights, diffusers etc to be made including extra supports wherever necessary. Measurements shall be as per actual area of false ceiling with out deductions for lights and diffusers.

Providing and fixing 6 mm thick e-board in panelling, masking, fixed in aluminium doors, windows, shutters and partition frames with C.P Brass / stainless steel screws etc. complete as per architectural drawings and directions of Engineer-in-charge. Note : This item will be used in false ceiling of room.

Providing and fixing of SPC (Stone Plastic Composite) - Plank flooring with acoustic properties with click-lock installation system, of size 7" x 48" mm and thickness ranging from 5 mm to 5.5 mm, approved colour, shade, texture, as per drawing, manufacturer’s specifications, removing of existing PVC flooring, surface preparation, levelling with SLC and as directed by Engineer in Charge. Note : 1. Sample should be submitted before execution for approval and only approved sample material will be used in flooring. 2. Any undulation in flooring should be level with Polymer modified cemetious self levelling compounds (SLC) and cost of SLC included in the rate, no extra payment. 3. Cost of removing PVC flooring shall also be considered in the rate for this item and no separate payment for the same shall be made.

Providing and laying self-leveling 4 mm thick acid resistant epoxy flooring including cleaning, surface preparation, primer coat, screeding, levelling etc. as per specification and as per instruction of Engineer in Charge. Note: This job to be carried out through a specialised approved agency. Sample work to be executed and got approved from Engineer-in-charge of the project.

Providing, supplying and laying pre machine polished granite slab flooring / dado / Wall cladding with not less than 17 mm thick granite slabs over 20 mm thick base cement mortar 1:4 (using crushed sand) laid and placed with grey cement slurry including filling the joints with matching white cement based tile grout complete all as per specifications and drawings.

Using approved black shade

Using approved shades other than black

Extra for providing edge moulding to 17mm thick or more marble stone / Granite Slab counters, Vanitis, etc. including machine polishing to edge to give high gloss finish et. Complete as per design approved by Engineer-in-charge. Note : Full moulding and glossy polishing as origional for granite in windows.

Providing and fixing 15 mm thick full body homogeneous vitrified tiles(800 x 2400mm)of approved color, shade and finish in flooring in required pattern with brass strip/Engineered Quartz as per drawings, and confirming to IS 15622 of approved brand & manufacturer, in all colours and shade in Glossy or matt or satin finish laid over a bed of minimum 20mm thick bed of cement mortor 1:4 (using crush sand) and jointing with grey cement slurry including grouting with the joints with cement based tile grout of approved make and matching shade complete as per patterns, drawings and specifications complete as directed by the Engineer in Charge . Note: Brass strip and quartz stone will be paid in relevant item.

In Cement mortor 1:4

Add extra for high polymer mortor in place of cement mortor

Providing and fixing 15mm thick full body homogeneous vitrified tiles (800 x 2400mm) with sparkles (matte finish) in pattern (with inlay of customised size, 1mm thick PVD coated SS- T profile) of approved brand and manufacturer in different sizes confirming to IS 15622 in all colours and shade in laid in wall/Dado with high polymer mortar of average thickness 6mm and jointing including grouting with joints with white cement based epoxy tile grout of approved make and matching shade complete as per patterns, all proper support, scaffolding, drawing and specification complete as directed by the Engineer in Charge . Note : PVD coated SS-T profile will be paid in relevant item.

Providing and fixing 15 mm thick Engineered Quartz (1200x 3000mm) of approved colour and shade of approved make in different sizes confirming to IS : 15622 in all colours and shade , in laid over a bed of minimum 20mm thick bed of cement mortor 1:4 (using crush sand) and jointing with grey cement slurry including grouting with the joints with white cement based tile grout of approved make and matching shade complete as per patterns, drawings and specifications complete as directed by the Engineer in Charge.

Providing and Fixing Homogeneous 2.00 mm thick PVC sheet / tile in flooring and skirting of approved make in approved pattern on a smooth and damp proof base using rubber based adhesive of approved quality and manufacturer including, levelling small undulations with plasterof paris if required , rolling with light wooden roller weighing about 5 kg all complete as directed by Engineer-in-charge in approved colour and shade

10 mm x 10 mm Square Brass strip

8 mm x 8 mm Square Brass strip

Providing and fixing of SS 304 PVD coated SS- T profile of customised size, Thickness 1mm, as per drawing, specification and as directed by Engineer in Charge.

Providing and fixing of 6 mm thick flexi plywood in exhibhition hall area in required curved shape and size at required height, as per drawings, specification and as per instruction of Engineer in charge including scaffolding. Note : Ply may be also used in 2 and more layer to get the required thickness. Glue/fevicol and other fixing arrangement /charges included in item and no extra payment.

Providing and fixing of 12mm thick BWP marine Plywood for making table, racks/ making doors and others with necessary hardware complete as per architect's instruction & detailed drawings and as directed by Engineer in Charge.

Providing and fixing 19mm Marine fire resistence plywood IS 710-2010 marked of approved make, pressing plywood adequately by adhesive of approved quality, manufacturer and pressing nails (lost headed) punch the same, cutting and fitting the plywood as per requirements, finish the same as per the instruction of the Engineer In Charge. Note- 1. For making of furniture item like storage unit, modification of conference table and other items. 2. All hardware items like hinges, handles, lock and others if any will be included in this item and nothing will be paid extra.

Providing and applying 2 to 3 or more coats of melamine polished of best approved make and shade to wooden/plywood surface etc as per manufacture specifications including preparing surfaces and as directed by Engineer in Charge complete.

Providing and applying French spirit polishing for wooden sufaces with two coats on new works including a coat of wood filler to form a uniform neat finish as directed by the Engineer -in-charge and / or as per the specifications complete as directed by the Engieer-in- charge

Providing wood work in frames of doors, windows, clear story openings and other frames, wrought framed and fixed in position of required size and shape including sawing, jointing,making rebates for shutters, making grooves as shown in the drawings, finishing the surfaces to the required finish all as per specifications and drawings including necessary MS hold fasts 40 mm X 3 mm thick, 200 mm long / with coach screws including protective painting to the suface that will come in contact with walls, joining materials, labour etc. complete all as per specifications and as directed by the Engineer-in-charge

Second class teak wood

Providing and fixing anodized aluminium work for doors, windows, ventilators and partitions with extruded built up standard tubular sections / Z sections and other sections of approved make conforming to IS 733 and IS 1285 fixed with rawl plugs and screws or with fixing clips or with expansion hold fastners including necessary filling up of gaps at junctions, at top, bottom and sides with required PVC / neoprene gasket etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically whereever required including cleat angle, aluminium snap beading for glazing / panelling, C.P brass / stainless screws all complete as per drawings and and directions of Engineer-in-charge including providing and fixing hinges / pivots and making provision for fixing of fittings wherever required including the cost of PVC / neoprene gasket required filling the gaps using silicon grout sealent etc. (fittings glazing and panelling shall be paid for separately)

Anodised Aluminium sections (Minimum anodizing thickness of 15 micron)

Extra over item 39.1 for colour Anosiding

Extra over item 39.1 for colour powder coated

Providing and fixing glazing in aluminium doors, window, ventilator shutters and partitions etc with PVC / Neoprene gasket etc. complete as per the architectural drawings and directions of the Engineer-in-charge (Cost of snap beading shall be paid in basic item)

With clear float glass panes of 5.00 mm thickness

With Clear toughned glass of 8 mm thick

With Clear toughned glass of 10 mm thick

Providing and fixing of toughned glass 12 mm thick, clear glass in curved profile of quarter circle of radius 0.35 m , length 1.35m as per drawing and specification and as per Architect/Engineer in Charge.

Providing and fixing of 35 mm thick flush door shutters conforming to IS : 2202 non-decorative type, core of block board construction with frame of 1st class hard wood and well matched commercial 3 ply veneering with internal teak wood lipping 25mm wide and fixing with 4 Nos of 125 mm long Stainless steel Hinges with S.S. wood screws complete.

Extra over item no. 42 for making door thickness 45 mm or more.

Extra for providing vision panel not exceeding 0.1 sqm in all type of flush door including fixing 4 mm clear glass with necessary teak wood beadings complete all as per specifications and as per drawings.

Extra for providing vision panel of 400 x 600mm in all type of flush door including fixing 4 mm clear glass with necessary teak wood beadings complete all as per specifications and as per drawings. Note - Opening /Glass size will be measured for payment

Extra over flush door shutters making rebate for double leaf shutters of all sizes, thickness and finishes complete as per the drawings

Extra for providing lipping with 2nd class teak wood battens 25 mm minimum depth on all edges of shutters (over all area of door shutter to be measured) Commercial flush door shutters

Design, fabrication, supply and installation of frameless Facade using clear, toughened float glass of specified thickness for fixed glazing and openable panels (doors) with crystal edge polish and necessary patch fittings for swing doors, hunged on floor spring, , S.S.handles and locking arrangement and clear toughened float glass fixed for fins and all joints sealed with weather silicone sealent and fixed portion glass from top sides and bottom with anodised (minimum thickness 25 microns) Aluminium 'C' channels (25 mm X 25 mm X 1.5mm thick) and all glass to glass joints sealed with clear thick weather silicone sealent and making the required grooves in plaster/concrete for fixing channels etc and making good the same with sealent / plaster of paris etc. complete all as per approved shop drawings, specifications and as directed by Engineer-in-charge. (Shop drawings to be prepared by the contrator as per the site conditions and the same shall be got approved by Engineer in charge before procurement.)

Frameless openable panels (swing doors) using 12mm thick for door leaves including making cut outs/ holes, finishing the edges with crystal edge polish ,sealents etc complete. Glass area alone shall be measured and paid (necessary patch fittings, locks & floor springs shall be paid under relevant Item)

Frameless fixed panels using 12mm thick clear toughened float glass including making cut outs, finishing the edges sealents etc complete. Glass area alone shall be measured and paid (necessary patch fittings shall be paid under relevant Item)

Providing , supplying fixing of following items

Providing, supplying fixing Top & bottom patch fittings with covers to suit floor springs & free pivots .

Providing, supplying fixing Over panel patch fittings with backing plate and pivots

Providing, supplying fixing high light to side light / corner link patch fittings with covers to suit floor springs & free pivots .

Providing, supplying fixing connecting link patch fittings for two or four glass

Providing, supplying fixing Floor Spring with spindle insert closing force EN3, EN4,EN6 with stainless steel satin finish cover plate complete including making cut outs on floor & finishing the same complete

Providing, supplying fixing Universal Centre lock with strike Plate .

Providing, supplying fixing corner lock with strike plate

Providing, supplying fixing wall to glass connecting patch fittings for fixed glass

Providing, supplying fixing back to back stainless steel handle-720mm long

Providing acid etching of the glass of door shutter/ panel as per the Architectural design, pattern and as shown in Drawing and as per instruction of Engineer in Charge.

Providing and fixing/making of Central pivoted sliding and foldable door in colour anodized aluminium frame work with proper arrangement of door straightening and fixing of plywood over it, as per drawing , specification alongwith necessary fittings like SS/brass hinges, tracks/channels, pivot,wheels, tower bolt, lock, filler materials, glue and other required fittings, making 3 mm groves and as per approved colour ,approved shop drawing and as instruction of Engineer in Charge. Note : 1. Shop drawing to be submitted by contractor for approval before starting of work. 2. Aluminium and Plywood will be paid in respective item. 3. A long MS rod at both end to be provided in all aluminium shutter in top and bottom horizontal members internally connecting vertical members and fixed with MS washers and nuts.4. All joints shall be Mitred joints. 5. Appx size of opening 7x 3.2mtr and made in 7 pieces foldable. All necessary track, pivet, hinges, handles, tower bolt, locking arrangements will be included in item and no extra payment will be made for these.

Modification of existing oval shape conference table by cutting the both semi circular shape and modify/extend at one end appx 0.9m in length and other end made in oval shape as per approved shop drawing, specification by using, plywood, flexiply, laminate, glue and other materials and as per instruction of Engineer in Charge. Note- 1 Laminate, wood work, plywood, flexiply, melamine polishing etc. will be paid in respective item. 2. Shop drawing to be submitted by contractor before execution for approval.

Proding and making of Security desk(approximate size: 3m x 0.78m ) as per approved shop drawing, made with 18mm thick marine plywood and finsihed with 15mm thick Engineered quartz of approved colour and shade, 1.5mm thick laminate, 10mm thick clear toughen glass with SS PVD coated vertical support 6mm thick of approved colour shade as per approved shop drawing, including drawer box, keyboard tray, all hardwares, fixing arrangement, glue, Inlay as per design/ approval/instruction of Engineer in Charge. Note : 1. Shop drawing shall be provided by contractor for approval before execution.

Providing and fixing of 150mm dia glass tube of 1200mm length, both side 25mm dia SS 304 pipe from floor to ceiling, bottom and top of tube with suitable base plate/SS CAP of 8mm thick with proper notching/threading including fixing with plate and anchor fastner, threading etc. all as per approved shop drawing, specification all as directed by Architect /Engineer in Charge. Note- Shop drawing to be submitted by contractor before execution for approval.

Providing and painting of 8mm thick toughened back painted glass with matt finish to be fix to 12mm marine ply with powder coated U channels & mounted on the panelling with clamps including materials, specifications complete as per approved shop drawing as directed by Engineer in Charge. Note – 1.Shop drawing to be submitted by contractor for approval. 2.Marine plywood and Aluminium items will paid in relevant item.

Designing, providing and fixing of 4 mm thick approved make and shade Aluminium Composite Metal Panel of approved make cladding /skirting at different locations including soffits of over-hangs but excluding aluminium frame work with grids filled in with weather silicon sealant as per the drawings. The ACM panel composition shall be of 0.5 mm thick PVDF coated aluminium sheet + 3 mm thick low density polyethelene virgin resin core + 0.5 mm thick polyester (PVDF) coated Aluminium sheet all complete as per approved shop drawings and specification (Aluminium frame work will be paid under reelevant item) Note : ACMP shall be measured to the actual visible area of the ACP sheet including silicon joints as fixed on site.

Supplying of unskilled man power / labour for loading / unloading, area cleaning and miscellaneous civil works etc including cost of equipment whichever is required at site.

Carpenter with valid pvc for entire contract period

Helper with valid pvc

Carrying out Civil Engineering works like surveying & leveling, checking of formwork fabrication, reinforcement fabrication as per drawings, witnessing sample retrieval & testing for various construction materials, ensuring concrete ingredient ratio at batching plant and pouring of appropriate grade of concrete in plain and reinforced concrete works, ensuring proper mixing of approved ingredients & waterproofing admixtures for mortars and brickwork, plaster, flooring & waterproofing works, and other civil & PH works including supervision of construction safety as per BARC specifications & relevant documentation, compiling, binding and preparation of tender documents & Agreements overall as directed by Engineer-in-Charge. Note : (1)Each Job shall be carried out by one qualified Technician having minimum SSC or Trade certificate in Masonary/Plumber/Carpenter/Painter Trade of not less than one year duration from ITI/Government Recognised Vocational Training Institute. (2)Deployment: The contractor shall deploy one Technician for each job for minimum 8 ½ hours per day with 30 minutes of break, in General (Ist / IInd) or on Round the clock shift including Saturdays, Sundays & holidays whenever necessary as per the discretion of the Engineer-in-Charge during the contract period. In case of emergency works like continuous pouring of concrete or shutdown/maintainance work, the technician will have to stay longer occasionally as per the instruction of the Engineer in-charge. No additional payment will be made on this account. (3) Period of work: The contractor shall carry out number of Jobs per month as per requirement at site for the period mentioned in NIT. (4) Mode of measurement : Measurement will be per job basis. A single job shall be carried out by deploying one Technician exclusively for the particular job. (5) The Technician should be engaged after scrutiny by EIC of CED, BARC and approved by Competent authority and the deployed Technician will report to BARC Engineer/ EIC. (6) The minimum notice period before change of technician is 1 (One) month; failing which a compensation, for not providing technical support, of Rs. 1250/- per day of shortfall in notice period will be levied on the contractor.

Carrying out Civil Engineering works like surveying & leveling, checking of formwork fabrication, reinforcement fabrication as per drawings, witnessing sample retrieval & testing for various construction materials, ensuring concrete ingredient ratio at batching plant and pouring of appropriate grade of concrete in plain and reinforced concrete works, ensuring proper mixing of approved ingredients & waterproofing admixtures for mortars and brickwork, plaster, flooring & waterproofing works, and other civil & PH works including supervision of construction safety as per BARC specifications & relevant documentation, compiling, binding and preparation of tender documents & Agreements overall as directed by Engineer-in-Charge. Note : (1)Each Job shall be carried out by one qualified Degree holder with 2 (Two ) years experience/Diploma holder with 5(Five) years experience (Licentiate in Civil/Construction Engineering / Technology) conducted by Board of Technical Examinations / University/ Autonomous Govt / Govt recognized Polytechnic/ Institute. (2)Deployment: The contractor shall deploy one Engineer for each job for minimum 26 working days per month for minimum 8 ½ hours per day with 30 minutes of break, in General (Ist / IInd) or on Round the clock shift including Saturdays, Sundays & holidays whenever necessary as per the discretion of the Engineer-in-Charge during the contract period. In case of emergency works like continuous pouring of concrete or shutdown/maintainance work, the person will have to stay longer occasionally as per the instruction of the Engineer in-charge. No additional payment will be made on this account.(3) Period of work: The contractor shall carry out number of Jobs per month as per requirement at site for the period mentioned in NIT.(4) Mode of measurement : Measurement will be per job basis. A single job shall be carried out by deploying one engineer exclusively for the particular job.(5) Engineer should be engaged after scrutiny by EIC of CED, BARC and approved by Competent authority and the deployed Engineer will report to BARC Engineer/ EIC. (6) The minimum notice period before change of engineer is 1 (one) month; failing which a compensation, for not providing technical support, of Rs. 1,623/- per day of shortfall in notice period will be levied on the contractor.

Filling the gap between aluminium frame & adjacent RCC / Brick work / Stone work by providing weather silicon sealant over backer rod of approved quality as per architectural drawings and direction of Engineer-in-charge complete Up to 5 mm depth and 5 mm width

Providing and fixing double action hydraulic floor spring of approved brand and manufacturer (conforming to relevant Indian Standard) for doors including cost of cutting floors as required, embedding in floors and cover plates with M.S pivot and single piece of M.S sheet outer box with slide plate etc. complete as per directions of Engineer-in-charge with brass cover plate

Providing and fixing IS: 3564 marked aluminium die cast body tubular type universal hydraulic door closer of approved make with necessary accessories and screws etc. in wooden doors / steel doors with necessary bolts & nuts complete as per specifications and as directed by the Engineer-in-charge.

Providing and fixing of Cam Action Concealed Door Closer with Hold Open Function and Adjustable Closing Force EN 2-4 of approved make with necessary accessories and screws etc. in wooden doors including making notches with necessary bolts & nuts complete as per specifications and as directed by the Engineer-in-charge.

Providing and fixing brass mortise latch and lock of approved make with 6 levers and a pair of lever Brass handles with necessary screws etc complete suitable for fixing in wooden / steel/ FRP/ doors as per specifications.

Providing and fixing C.P teak wood moulded beading (Architrave) of size 50 X 12 mm using 2nd class teak wood to door and window frames with necessary screws and painting with a coat of approved primer etc. complete

Lead charges for debris Exceeding 4 KM but not exceeding 5 KM, by mechanical transport including loading, unloading, stacking / levelling etc. The rates are applicable for NET Quantities arrived at after making deduction for voids @ 30% from corresponding TRUCK Measurement

Providing and fixing stainless steel tower bolts of size 300 X 12 mm of approved make with necessary screws etc. all as per specifications and as per drawings.

Providing and fixing anodised aluminium tower bolts of size 300 X 12 mm (barrel type) ISI marked of approved make transparent or dyed to requried colour or shade with necessary screws etc.all as per specifications and as per drawings.

Providing and fixing 304 grade stainless steel pipes/plates of approved size and make and quality by cutting and placing in position including embedding if necessary complete as per specification and as directed by the Engineer in Charge.

Providing and constructing brick work in cement mortar using Standard bricks of approved quality / class, make / brand in super structure above plinth up to Floor-II level in all shapes and sizes including curing, raking out joints complete as per specifications and as directed by the Engineer-in-charge

Brickwork in super structure with standard bricks in C.M 1:4 using crushed Sand

Providing 15 mm thick plastering using Ready mix internal plastering compound of approved make for internal faces of brickwork / concrete surfaces including preparation of the surface, curing, cleaning, scaffolding complete all as per specifications and as directed at site by the Engineer-in-charge.

Cement concrete 1:2:4 (1 cement : 2 CRUSHED sand : 4 graded stone aggregate 20 mm nominal size) in pavements, laid to requried slope and camber in panels as required including consolidation inishing and tamping complete. Note : Aggregate size 20mm/10mm & below or 6mm below will be used as per instruction of Engineer in Charge.

Providing , centering ,shuttering Form work by using steel plates, timber planks for PCC and minor structures including necessary strutting, proping, without staging, supports etc and deshuttering the same after the specified time all as per drawings, specifications and as directed by the Enginner-in-charge

Providing and applying one coat of cement primer of approved brand on wall surface to receive specified paint including scaffolding complete all as per specifications and as directed by Engineer-in-charge

Providing and applying white cement based wall putty of approved make over concrete or Plastered surface up to 3 mm thick to get uniform surface free from undulation including cleaning complete all as directed by the Engineer-in-charge

Providing and applying wall painting two coats on new work with premium plastic emulsion paint of approved brand to give an even shade, including a coat of approved cement primer, including preparation of the surfaces, scaffolding complete. as per specifications and as directed by the Engineer-in-charge

Providing and painting, finishing with antifungal paint of approved make with two coats over treated surface including surface preparation, scaffolding complete all as per manufacturer's specifications and as directed by the Engineer-in-charge.

Providing, applying wall painting two coats with Lustur paint of approved brand to give an even shade over a coat of cement primer including preparation of the surfaces, scaffolding complete. as per specifications and as directed by the Engineer-in-charge

Providing and painting TWO coats of synthetic enamel paint on new wooden surfaces of approved brand and manufacturer of required colour to give an even shade over an under coat of suitable shade primer of approved brand and manufacturer including preparation of the surfaces, scaffolding complete. as per specifications and as directed by the Engineer-in-charge

Providing and Painting two coats of synthetic enamel paint on steel surfaces of approved brand and manufacture to give an even shade over a primer coat.including preparation of the surfaces, scaffolding complete. as per specifications and as directed by the Engineer-in-charge

Providing and laying in position Reinforced Cement Concrete (RCC) of grade M-30 using 20mm maximum size aggregates and crushed sand of approved quality including admixtures of approved brand and quality (plasticiser or super plasticiser) if required, including weigh batching, mechanical mixing, transporting, placing, vibrating, consolidation, finishing, curing etc. complete but excluding the cost of centering, shuttering and reinforcement complete as per specifications up to Plinth Level. Minimum cement content is as as per latest revised IS code.

Providing Reinforcement Steel for reinforced cement concrete at all levels including supplying, preparation of bar bending schedules, cutting, bending, transporting, fixing, tieing in position with PVC coated G.I binding wire, all labour charges, cost of cover blocks in specified grade of concrete etc. complete as per specifications and drawings. Steel supplied by Contractor

Using TMT bars of specified grades all dia bars confirming to IS 1786. TMT bars to be supplied by the contractor

Providing Structural steel work using angles, channels, joists and other sections, welded and / or bolted in built up sections for trusses , structural steel floors, frame works, monorails and other structures including supplying, cutting, welding, fabricating, hoisting, fixing in position, applying a priming coat of approved steel primer etc. complete all as per specifications, drawings and as directed by the Engineer in charge. Note: 1) Structural steel required for the work shall not be supplied by the Department and the contractor has to procure the same. 2) Welding weights, connections, bolts and nuts shall not be measured for payment, but the cost of which shall be deemed to have been included in the rate. 3) All holes will be made by drilling only. Gas cutting of holes will not be permitted.

Up to and including 300 mm Joists, 350 mm channels, and below sections using materials of approved manufacturers. All test reports to be provided along with the supply of the materials

Providing and fixing of stud anchors including drilling in concrete as per requirement for fixing Eps or other structure all as specified by the manufacturer complete all as per specifications and drawings and as per Engineer in Charge. Stud Anchor - M 10 x 110mm long

Lead charges for debris Exceeding 2 KM but not exceeding 3 KM, by mechanical transport including loading, unloading, stacking / levelling etc. The rates are applicable for NET Quantities arrived at after making deduction for voids @ 30% from corresponding TRUCK Measurement

Providing and fixing double tubular scaffolding system using H- frames with cup lock type on the exterior side upto seven story height made with 40 mm dia M.S. tube 1.5 m centre to centre horizontal and vertical tubes joining with cup and lock system with M.S. tubes, M.S. tube challies, M.S clamps and M.S staircase system in the scaffolding for working platform etc. and maintaining it in a serviceable condition for the required duration as approved and removing it thereafter. The scaffolding system shall be stiffened with bracings, runners, connection with building etc. wherever required for inspection of work at required locations with essential safety features for the workmen etc. complete as per directions and as approved by the Engineer -in - charge. The elevational area of the scaffolding shall be measured for payment purposes. The payment shall be made once irrespective of duration of scaffolding

Preparation of Coordinated Services & Finishing drawings, in CAD and in pdf format, with reference to the site-use drawings issued by the Department for architectural finishes & features, structural use and for all kinds of services like electrical raceways & conduits, mechanical, public health (PH), LAN, AV & Computer, CCTV & other instrumentation, furniture layout & dimensions etc. including generation of sections, wall elevations, blow-up details etc. showing the finishing & the service locations with detailed dimensions, nomenclature & legends and submission of the coordinated drawings in soft & hard copies for site use / reference during the construction of the facility all inclusive of professional charges, material cost & consumables etc. all complete as directed by the Engineer-in-Charge. Note: 1) the coordinated drawings will be reviewed & modified periodically by the Department in 3 (three) stages viz. preliminary, intermediate and final stage. These 3 (three) iterations shall be completed by the contractor within max. 30 (thirty) working days from the date of issue of site use drawings by the Department. Additional revisions due to omission of the corrections suggested by the Department, on the part of the contractor, will not be accounted for any extra payment. 2) the contractor shall engage experienced Architect & draftsman for preparation of coodinated drawings and coordination & interaction with the departmental representatives for the revision(s) and approval of the drawings. 3) the legible copies of the signed coordinated shall be displayed at site, for ready reference during construction, by the contractor at his own cost. 4) The coordinated drawings shall be up to scale and shall show the sub-set / details of each services individually, if required by the Engineer-in-charge. 5) Inputs from the department: site use drawings for architectural, strucural, PH, electrical, mechanical, LAN, AV & Computer, CCTV & other instrumentation, furniture layout etc. as applicable for the work.

Par B- Electrical work Indoor Lighting Fixtures - Supply, installation, testing and commissioning of following LED lighting fixture as per tender specification.

18W Recess 150 mm dia 4000K LED lighting fixture as per TSS 01

32W Recess 1195 mm x 295 mm size 6500K LED lighting fixture as per TSS 02

22 W Linear type 4 ft length 4000K LED lighting fixture as per TSS 03

18W Recess 150 mm dia 6500K LED lighting fixture as per TSS 04

3W Recess LED 3000K spot lighting fixture as per TSS 05

24 W Recess LED 3000K spot lighting fixture as per TSS 06

3W Surface LED 3000K spot lighting fixture as per TSS 07

36W Recess 600 mm x 600 mm size LED 6500K lighting fixture as per TSS 08

24 W Recess LED 4000K spot lighting fixture as per TSS 06A

Decorative and Emergency Lighting Fixtures - Supply, installation, testing and commissioning of following LED lighting fixture as per tender specification.

400 Lumen/meter Strip/cove 3000K lighting fixture as per TSS 09

Hanging pendent light LED 3000K lighting fixture as per TSS 10

Modern Chandeliers LED 3000K lighting fixture as per TSS 10A

Exit lighting fixture as per TSS 10B

Emergency lighting fixture with mounting stand as per TSS 10C

Distribution Boards - Supply, installation, testing and commissioning of following distribution boards as per tender specification.

12 way PPI TPN DB as per TSS 11

8 way PPI TPN DB as per TSS 11

LT power cable - Supply, installation, testing and commissioning of following 1.1 kV, copper/Al conductor, XLPE insulated, PVC sheathed FRLS cables as per tender specifications.

Surface laying of 4C x 25 sq. mm Al conductor cable as per TSS 12

End termination of power cables - End termination of following copper/Al conductor, XLPE insulated, PVC sheathed cables with copper lugs, single compression type brass glands, earthing etc as per tender specifications.

4C x 25 sq. mm Al conductor cable as per TSS 13

Point wiring - Supply, installation, testing and commissioning of point wiring as per TSS 14 of tender specification.

Wiring with 2.5 sq.mm copper wire (Primary switch box point for light/ fan)

Wiring with 2.5 sq.mm copper wire (Primary power point)

Wiring with 2.5 sq.mm copper wire (Secondary power point)

Wiring with 1.5 sq.mm copper wire (Primary light/fan point)

Wiring with 1.5 sq.mm copper wire (Secondary light/fan point)

Wiring with 4 sq.mm copper wire (Centralized power point)

Modular box - Supply and installation of following modular boxes as per TSS 15 of tender specification

12 module box

8 module box

4 module box

2 module box

Switches - Supply, installation, testing and commissioning of following modular switches as per TSS 16 of tender specification

16 A SP switch

6A SP switch

Modular box mounted 20A DP MCB

Modular box mounted 25A DP MCB

Sockets - Supply, installation, testing and commissioning of following sockets as per TSS 17 of tender specification

6/16A sockets

6A sockets

Blanking Plates - Supply and installation of Blanking Plates as per TSS 18 of tender specification

Al/DLP LDPE Trunking - Supply and installation of Trunking with cover of following size along with accessories as per TSS 19 & 19A of tender specification

80 mm x 50 mm size DLP LDPE trunking along with accessories

105 mm x 50 mm size DLP LDPE trunking along with accessories

50 mm x 50 mm size Aluminium trunking along with accessories

150 mm x 50 mm size Aluminium trunking along with accessories

200 mm x 50 mm size Aluminium trunking along with accessories

Casing capping - Supply & installation of 25x12 mm size casing capping as per TSS 20 of tender specification

Telephone Points - Supply, installation, testing & comissioning of Telephone points as per TSS 21 of tender specification

Data Points - Supply, installation, testing & comissioning of data points as per TSS 22 of tender specification

Cat6 UTP Cable - Supply, installation, testing and termination of cat6 cable as per TSS 23 of tender specification

Cat6 cable End termination - End termination of Cat6 UTP Cable as per TSS 24 of tender specification

GI Flexible pipe - Supply and installation of GI Flexible pipe as per TSS 25 of tender specification

PVC Conduit - Supply and installation of PVC Conduit surface/concealed as per TSS 26 of tender specification

M S Box - Supply & installation of MS boxes fabricated out of MS sheets as per TSS 27 of tender specification.

M S item - Supply & installation of MS items fabricated out of MS angles/channels as per TSS 27 of tender specification.

Earthing Conductor - Supply and installation of tinned copper earth strip/wire of following sizes to be installed in trenches, under ground, wall, RCC, slab, above false ceiling, trenches etc. as per tender specifications.

8 SWG copper wire as per TSS 28

MCB in a box - Supply, installation, testing and commissioning of following rating Three phase 4 P/ 2 P MCB with box as per TSS 29 of tender specifications.

4P 32 A MCB

2P 25 A MCB

2P 63 A MCB

FA and PA system - Removal and re-installation of following fire alarm and public address system equipments as per TSS 30 of tender specifications.

PA system rack with UPS and battery back

1 pair 1.5 sq.mm copper cable with terminations

Addressable Smoke/heat detectors

Manual call point

Hooter cum flasher

Response indicator

Ceiling mounted and wall mounted speakers

Removal of following equipments along with wiring as per TSS 31 of tender specifications.

Distribution boxes/Wall Mounted panel with wiring

Power/lighting points with wiring

Data/telephone points with wiring

Lighting fixtures with wiring

Switch boards/ wall mounted box with wiring

Data Networking System.

Supply, installation, testing & comissioning of 42 U Data networking racks including platform as per TSS 32 of tender specifications.

Supply, installation, testing & comissioning of 24 port patch panel as per TSS 33 of tender specifications.

Supply and installation of Junction boxes as per TSS 33A of tender specifications.

Supply, installation, testing & comissioning of Cat-6 UTP patch cord of 1-meter length as per TSS 33B of tender specifications.

Supply, installation, testing & comissioning of Cat-6 UTP patch cord of 2-meter length as per TSS 33C of tender specifications.

Supply, installation, testing & comissioning of Cat-6 UTP patch cord of 3-meter length as per TSS 33D of tender specifications.

Supply, installation, testing & comissioning of Cat-6 UTP patch cord of 5-meter length as per TSS 33E of tender specifications.

Supply, installation, testing & comissioning of PoE Layer 2 Ethernet access switch as per TSS 33F of tender specifications.

Supply, installation, testing & comissioning of Non-PoE Layer 2 Ethernet access switch as per TSS 33G of tender specifications.

Junction Boxes

Supply and installation of Junction Boxes of size 275mm x 200mm

Supply and installation of Junction Boxes of size 200mm x 200mm

Supply and installation of Junction Boxes of size 150mm x 150mm

Telephone System.

Supply, installation, testing & comissioning of 20 pair telephone cable on wall/tray/truncking as per TSS 34 of tender specifications.

Supply, installation, testing & comissioning of 24 port telephone patch panel as per TSS 35 of tender specifications.

Part C, Mechanical/ HVAC work Ductable Air Conditioner: Supply, installation, testing and commissioning of ceiling suspended ducable Air Condiioning system of 11TR nominal cooling capacity each having microprocessor based controller along with outdoor units as per clause no.1 of tender technical specification for HVAC works.

Ducting work: Fabrication, supply, installation, testing, air balancing and commissioning of air ducting in rectangular cross section, fabricated out of Gavanised Steel sheets of thickness 0.8 mm.The ducting work shall be carried out as per clause no.2 of tender technical specification for HVAC works.

Supply air diffuser/Grille alongwith volume control dampers: Supply, installation, testing and commissioning of supply air diffuser/grilles in Aluminium construction alongwith volume control dampers finished with suitable colour. The diffuser work shall be carried out as per clause no.3 of tender technical specification for HVAC works.

Thermal Insulation: Supply and installation of class 0 thermal insulation sheet of 25mm thickness in closed cell structure (Nitrile butadine rubber) with reinforced glass cloth covering as per clause no.4 of tender technical specification for HVAC works.

Acoustic insulation of duct: Supply & installation of hydrophobic, open-cell elastomeric foam based rubber acoustic insulation of 25mm thickness as per clause no.5 of tender technical specification for HVAC works.

Fire retardant flexible connection: Fabrication, supply and installation of fire retardant flexible connection as per clause no.6 of tender technical specification for HVAC works.

Copper Piping: Supply and installation of refrigeration quality copper piping/tubing along with sleeve type insulation as per clause no. 7 of tender technical specification for HVAC works. NB: Each running meter of copper tubes will consists of one meter each of suction and discharge line together along with insulation.

Electrical Cabling: Supply, layinng and termination of following size electrical cables as per clause no.8 of tender technical specificaion for HVAC works.

Four core 4 sq.mm

Three core 2.5 sq.mm

Drain Piping: Supply and laying of condensate drain pipes of 25mm dia NB rigid PVC pipe as per clause no.9 of tender technical specification for HVAC works.

Caping-casing: Supply and installation of PVC casing - capping of 100 x 50 mm size for enclosing refrigerant tubing, condensate drain piping and electrical cable as per clause no.10 of tender technical specification for HVAC works.

MS Structural work: Supply, fabrication & fixing of stands and structures (size depending as per site condition) made out of mild steel of appropriate grade completely painted with black color as per clause no. 11 of tender technical specification for HVAC works.

Providing & fixing of Scaffolding for ducting work: Providing and fixing double tubular scaffolding system using H- frames with cup lock type on the exterior side upto 4 m height as per clause no.12 of tender technical specification for HVAC works.

Fixed blade Linear grille : Supply and installation of fixed blade Air grille in Aluminium construction finished with suitable colour as per clause no.13 of tender technical specification for HVAC works.

Part D, Audio Video Passive System Supply, Installation, Testing, Configuration, Programming, Commissioning, Training (SITCPCT) of "S/FTP Cat 6 Cable" having technical specification and requirements as per AVTSC3

Supply, Installation, Testing, Configuration, Programming, Commissioning, Training (SITCPCT) of "USB 2.0 Cable Male to Male of length 3ft" having technical specification and requirements as per AVTSC5

Supply, Installation, Testing, Configuration, Programming, Commissioning, Training (SITCPCT) of "USB 2.0 Cable Male to Male of length 6ft" having technical specification and requirements as per AVTSC6

Supply, Installation, Testing, Configuration, Programming, Commissioning, Training (SITCPCT) of "USB 2.0 Cable Male to Male of length 10ft" having technical specification and requirements as per AVTSC7

Supply, Installation, Testing, Configuration, Programming, Commissioning, Training (SITCPCT) of "USB 2.0 Cable Male to Male of length 15ft" having technical specification and requirements as per AVTSC8

Supply, Installation, Testing, Configuration, Programming, Commissioning, Training (SITCPCT) of "USB 2.0 Cable Male to Male of length 25ft" having technical specification and requirements as per AVTSC9

Supply, Installation, Testing, Configuration, Programming, Commissioning, Training (SITCPCT) of "USB 2.0 Cable Male to Male of length 35ft" having technical specification and requirements as per AVTSC9A

Supply, Installation, Testing, Configuration, Programming, Commissioning, Training (SITCPCT) of "USB 3.0 Cable Male to Male of length 3ft" having technical specification and requirements as per AVTSC10

Supply, Installation, Testing, Configuration, Programming, Commissioning, Training (SITCPCT) of "USB 3.0 Cable Male to Male of length 6ft" having technical specification and requirements as per AVTSC11

Supply, Installation, Testing, Configuration, Programming, Commissioning, Training (SITCPCT) of "USB 3.0 Cable Male to Male of length 10ft" having technical specification and requirements as per AVTSC12

Supply, Installation, Testing, Configuration, Programming, Commissioning, Training (SITCPCT) of "USB 3.0 Cable Male to Male of length 25ft" having technical specification and requirements as per AVTSC13

Supply, Installation, Testing, Configuration, Programming, Commissioning, Training (SITCPCT) of "USB 3.0 Cable Male to Male of length 33ft" having technical specification and requirements as per AVTSC14

Supply, Installation, Testing, Configuration, Programming, Commissioning, Training (SITCPCT) of "USB Type-C to Type-C of length 3ft" having technical specification and requirements as per AVTSC15

Supply, Installation, Testing, Configuration, Programming, Commissioning, Training (SITCPCT) of "USB Type-C to Type-C of length 6ft" having technical specification and requirements as per AVTSC16

Supply, Installation, Testing, Configuration, Programming, Commissioning, Training (SITCPCT) of "USB Type-C to Type-C of length 10ft" having technical specification and requirements as per AVTSC17

Supply, Installation, Testing, Configuration, Programming, Commissioning, Training (SITCPCT) of "USB Type-C to Type-C of length 35ft" having technical specification and requirements as per AVTSC19

Supply, Installation, Testing, Configuration, Programming, Commissioning, Training (SITCPCT) of "4K Slim HDMI Cable of length 3ft" having technical specification and requirements as per AVTSC20

Supply, Installation, Testing, Configuration, Programming, Commissioning, Training (SITCPCT) of "4K Slim HDMI Cable of length 6ft" having technical specification and requirements as per AVTSC21

Supply, Installation, Testing, Configuration, Programming, Commissioning, Training (SITCPCT) of "4K @ 60Hz (4:4:4) High Speed HDMI Cable with Ethernet of length 10ft" having technical specification and requirements as per AVTSC22

Supply, Installation, Testing, Configuration, Programming, Commissioning, Training (SITCPCT) of "4K @ 60Hz (4:4:4) High Speed HDMI Cable with Ethernet of length 15ft" having technical specification and requirements as per AVTSC23

Supply, Installation, Testing, Configuration, Programming, Commissioning, Training (SITCPCT) of "4K @ 60Hz (4:4:4) High Speed HDMI Cable with Ethernet of length 25ft" having technical specification and requirements as per AVTSC24

Supply, Installation, Testing, Configuration, Programming, Commissioning, Training (SITCPCT) of "4K @ 60Hz (4:4:4) High Speed HDMI Cable with Ethernet of length 35ft" having technical specification and requirements as per AVTSC24A

Supply, Installation, Testing, Configuration, Programming, Commissioning, Training (SITCPCT) of "4K @ 60Hz (4:4:4) High Speed HDMI Cable with Ethernet of length 50ft" having technical specification and requirements as per AVTSC25

Supply, Installation, Testing, Configuration, Programming, Commissioning, Training (SITCPCT) of "4K @ 60Hz (4:4:4) High Speed HDMI Cable with Ethernet of length 66ft" having technical specification and requirements as per AVTSC26

Supply, Installation, Testing and Commissioning (SITC) of "Powder coated MS raceway of size 300mmx50mm with partitions" having additional specification and requirements as per AVTSC41."

Supply, Installation, Testing and Commissioning (SITC) of "Powder coated MS raceway of size 250mmx50mm with partitions" having additional specification and requirements as per AVTSC42"

Supply, Installation, Testing and Commissioning (SITC) of Powder coated MS junction box of size 375mm x 304mm x 54mm" having additional specification and requirements as per AVTSC43"

Supply, Installation, Testing and Commissioning (SITC) of Powder coated MS junction box of size 304mm x 304mm x 54mm" having additional specification and requirements as per AVTSC44"

Supply, Installation, Testing and Commissioning (SITC) of Powder coated MS junction box of size 254mm x 254mm x 54mm" having additional specification and requirements as per AVTSC45"

Supply, Installation, Testing, Configuration, Programming, Commissioning, Training (SITCPCT) of "24 port S/FTP Jack Panel Compatible with supplied S/FTP cable" having technical specification and requirements as per AVTSN3

Part E- Physical Protection system Cat-6 UTP cable (305 meters Bundle) as per TSS

25 mm dia. FRLS uPVC conduit as per TSS

24 port POE rack mountable Network switch as per the TSS

8 port PoE Network Switch power supply and suitbale wall moutable JB, MCB , power socket,& power terimal block, glands as per TSS

25 x 16 mm PVC Casing Capping as per TSS

3 core 1.5 sq. mm Power Cable as per TSS

Miscellaneous Items to fulfil the work (reinforced Flexible Conduits, Rj-45 Connectors, Cable tags, CCTV sign Boards, View finder device, Lan tester device,Power cable Glands etc..) as per TSS

fully loaded 24 port Cat 6 Patch Panels as per TSS

Rack moutbale power strip with MCB for 5 Nos. of Power sockets

Installation, Testing & Commissioning of Entire CCTV System as per TSS

Removal, shifting, Re-installation of Electronic key cabinet & Time attendance Readers

Removal of existing CCTV system

Part F- RFID System, RFID Readers with power supply and compatible GANG box for Identity Validator System

Panel PC with wall mount/table mount for Employee details Display System

Mahendra Realtors & Infrastructure Limited (BID ID -3330920)