SPECIAL REPAIR TO BLDG NO P-7 AT NEW RATC LINES AND PROVN OF 02 X CLIMATE CONTROL SYSTEM UNDER GE WEST MATHURA

Amount

Dismantling AC sheet (Corrugated, Semi corrugated etc) as in roofs etc including ridges complete all as specified and directed by Engineer-in-charge.

Dismantling timber scantlings 40 sq. cm and over in section in framed work, in any position complete all as specified and directed.

Dismantling of wall and ceiling boards of any type and any thickness including cover fillets complete all as specified and directed.

Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing) and removing rubbish off premises complete all as specified and directed.

Demolition of stone slabs and tiles of any description or thickness in floors, aprons etc, laid, bedded, jointed and pointed in any mortar complete all as specified and directed by Engineer-in-charge.

Demolition of brick work, built in cement mortar or cement lime mortar including all quoins, arches, pillars, etc but excluding ashlar facings, dressed stonework and precast concrete articles complete all as specified and directed by Engineer-in-charge.

Taking down chowkhats with shutter (without taking off shutters from the frame) area not exc. 1.50 Sqm each complete all as specified and directed.

Taking down chowkhats with shutter (without taking off shutters from the frame) area exc. 1.50 Sqm but n.exc 4.00 sqm each complete all as specified and directed.

Taking down shutters of any description exc 1 Sqm and not exc. 2 Sqm each complete all as specified and as directed by Engineer-in-charge.

Demolition of plain cement concrete in ground floor and pavings not exc 15 cm thick (below or above ground level) including floor tiles of any description complete all as specified and directed by Engineer-in-charge.

Taking down cement plaster on brick or stone walls etc. including racking out joints, hacking for key, scrubbing down with water, any description etc. complete all as specified and as directed.

Dismantling of wrought iron or mild steel work of any description not otherwise provided for complete all as specified and directed by Engineer-in-charge.

M & L for Pre-painted galvalume aluminum zinc coating GI based corrugated steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering /cladding to wall, fixed with self tapping screws complete all as specified and directed by Engineer-in-charge.

M & L for Pre-painted galvalume aluminum zinc coating GI based Plain steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering /cladding to wall, fixed with self tapping screws complete all as specified and directed by Engineer-in-charge.

M&L for 4 mm thick board classic,fibre base cement boards, embosed texture, fixed to aluminium snap grid (Size of grid 605 x 605 mm) in ceiling complete all as specified & directed. Note:- The Aluminium snap grid frame work shall be measured & paid for separately.

S&F Anodised aluminium snap grid frame work for false ceiling complete all as specified & directed

S&F for Hangers 6 mm dia. G.I. (upto 1200mm length) adjusting level fixed to roof slabs by means of ceilling cleats made out of G.I. flat 40 x 3 mm size 60mm long and expansion hold fasteners 12.5mm dia. 40mm long complete all as specified.

M&L for Roof trusses (framed), trussed, purlins, crane gantries, rails and fastenings and heavy bracket framing (Beam, tee, angle, channel or flat sections) FE-290 GD-165 including distance pieces, cleats etc. Complete all as specified & directed.

S&F 125x60mm pressed steel frames for doors with one or more rebates including necessary lugs, hinges lock, strike plate etc complete all as specified and as directed.

S&F 105x60mm pressed steel frames for doors with one or more rebates including necessary lugs, hinges lock, strike plate etc complete all as specified and as directed.

M&L for 35 mm thick flush shutter with solid core construction with block board core and plywood face panels , commercial type on both sides members of shutters, covered decorative on both face veneer with liping/frame to match as specified in SSR Part I, section 8, clause 8.24 (a); supplied & fitted to Chowkats complete all as specified and directed by Eng-in-charge.

S&F 35mm thick factory made glazed and skeleton shutters made of second class hard wood (Bonsum/Hollock), open rebated and prepared to receive glass, gauze etc (without sash bars) edges of framing plain, chamfered or rounded, fitted with cut and mitred beads for securing glass etc., sizes of members of shutters as specified in SSR Part I Section 8 Clause 8.24 (a) kiln seasoned and chemically pressure treated fixed to chowkat complete all as specified and directed by Engineer-in-charge.

S&F factory made solid PVC door frame of size 50mm x 47mm made out of 5mm thick plain colour PVC sheet reinforced with MS square tube complete all as specified & shown in relevant drawing of item No. 08095 in MES Schedule (Part-II) and directed by Engineer-in-Charge.

S&F 30mm thick factory made solid core PVC door shutter (style) consisting of frame made out of mild steel tubes for top and bottom rails, mild steel frame shall be covered with heat moulded plain colour PVC sheet, 'C' channel having PVC sheet strip of 20mm width stuck inside with solvent cement for styles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail and bottom rail; panelling of plain colour PVC sheet to be fitted in mild steel frame welded/ sealed to the styles and rails with suitable PVC sheet beading and joined together with solvent cement, complete, all as specified & shown in relevant drawing of item No. 08080 in MES Schedule (Part-II) and directed by Engineer-in-Charge.

S&F 300mm stainless steel sliding door bolts, bolt type with bright bolt not less than 12mm dia with and including a minimum of 6 bolts and nuts, four on bolt plate and two on staple plate and fixed complete all as specified and directed.

S&F 140mm Floor door stopper of aluminium alloy body and tongue, anodised, with hard drawn steel spring, fixed in floor complete all as specified and directed.

S&F stainless steel butt hinges 100mm complete all as specified and directed.

S&F 200mm stainless steel barrel tower bolts with bright bolt and fixed complete all as specified and directed.

S&F 150mm long stainless steel handles, oval type complete all as specified and directed.

S&F in repairs towel rail chromium plated 20mm dia ‘D’ type, 600mm long complete all as specified and directed by Eng-in-charge.

S&F in repairs for stainless steel 25mm dia as in curtain rod including brackets and side holders complete all as specified and as directed.

S&F 300mm mild steel (Helical door spring) ordinary rat tail rod pattrern spring including roller and roller plate complete with necessary welding work complete all as specified and directed.

Roughening the surfaces of old concrete floor by picking, sweeping, cleaning and washing down with water to remove dust and brushing neat cement slurry with 3 kg of cement per sqm complete all as specified and directed.

M&L for preparation of new steel surfaces of any description not otherwise described over 10 cm width or girth and applying two coats of synthetic enamel paint over a coat of red oxide primer complete all as specified and directed by Engineer-in-charge.

M&L for preparation of new wooden or wood based surfaces of any description not otherwise described over 10cm width or girth and applying two coats of synthetic enamel paint over a coat of pink primer complete all as specified and directed by Engineer-in-Charge.

M&L for non skid ceramic coloured tiles 7 to 8mm thick (square / rectangular) area of each tile exceeding 0.18 sqm but not exceeding 0.38 sqm as in floors, set and jointed in neat cement slurry and pointed in white or coloured cement to match the shade of tiles over & including 15mm thick screed bed in cement & sand mortar (1:4) complete all as specified and directed by Engineer-in-charge.

All as per item No 35.00 (here-in-before) abvoe but as in skirting over 10mm thick backing coat in CM (1:3) complete all as specified and directed.

M&L Non skid coloured ceramic tiles 7 to 8 mm thick (Square / rectangular) area of each tile exceeding 0.11 sqm but n.exc 0.18 sqm in floors etc set and jointed in neat cement slurry and pointed in coloured cement to match with and including 15mm thick screed bed in cement mortar (1:6) for laying floor finishes complete all as specified and as directed.

M&L Coloured Glazed ceramic tiles in vertical surface 450x300x7 mm with highlighter thick set and jointed in neat cement slurry and pointed in white or colour cement to match incl 10mm thick plaster in cement mortar (1:3) complete all as specified and directed.

M&L for 18-20mm thick Granite (of any type) work (table rubbed and polished) in steps, jambs, pillars, window-cills, cooking platforms and like including 20mm screed bedding in cement mortar (1:4) and pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite complete all as specified and as directed.

Rounding to edges of stone slabs one edge, such as in steps, cooking platform, and other similar situations etc complete all as specified and directed.

S&F powder coated (minimum thickness of powder coating 50 micron) Anodised aluminium frame for doors, windows, ventilators with one or more rebates including joining cleat for fixing etc. complete all as specified and directed.

S&F powder coated (minimum thickness of powder coating 50 micron) Anodised aluminium alloye sections sliding windows with frames series B (18mm), 3 track sliding shutters duly fitted with neoprene beading, glazing clips two shutters tinted glass panes 4.80mm nominal thickness one shutter with stainless steel wire cloth 0.36mm dia and average width of aperture 1.4mm, aluminium alloy handles etc. complete all as specified and directed. Note : The rates include the cost of glazing, aluminium wire cloth, rubber packing, joining, cleats, glazing clips, aluminium snap beading, locking arrangement, handle with or without opening for AC/coolers as directed by Engineer-in-Charge.

S&F Powder coated (minimum thickness of powder coating 50 micron) anodised aluminium window and ventilator shutters, fixed type without sash bars, aluminium sections weighing 0.55 kg/m including necessary joining cleats, glazing clips, rubber packing, anodised aluminium snap beading, screws including locking arrengment complete all as specified and directed.

M&L 5mm thick figured glass pin head type and glazing with oil putty in square not exc 0.5 sqm in each pane complete all as specified and directed by Engineer-in-charge.

M&L for PCC (1:3:6) type C-0 using 12.5 mm graded stone aggregate as in filling of pressed steel frame complete all as specified and as directed.

M&L for mild steel framed work as grill gratings etc with end of bars shouldred and / or rivited or forged into spikes, framed guard bar barred iron door ladders, framed balusters, walk ways, railings, frame work of water tanks and similar work conforming to Fe-290, Gde-E-165, complete all as specified and directed.

S&F stainless steel wire cloth. 0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed with stainless steel wire staples complete all as specified and directed.

M&L for 25mm thick PCC (1:2:4) type B-0 using 12.5mm graded stone aggregate) as in floor finishes and leveling course complete all as specified and directed.

M&L for Brick work with fly ash bricks, straight or curved on plan exc 6m mean radius built in cement mortar (1:6) complete all as specified and directed by Engineer-in-charge.

M&L for Brick work with fly ash bricks, straight or curved on plan to any radius half brick thick wall built in CM (1: 6) complete all as specified and directed.

M&L for 15mm thick rendering in two layer on fair faces of brick masonry or concrete surfaces of walls consisting of 1st layer of 10mm thick plaster in CM 1:6 and 2nd layer (setting coat or top layer) of 5 mm thick plaster in CM 1:4 mixed with water proofing compound (ISI marked) as per manufacturer’s instructions, finished fair & even, complete, all as specified. Note : - Supply only water proofing compound shall be measured and paid for separately.

Supply only liquid water proofing compound complete all as specified and directed.

M&L for rendering 10mm thick on other than fair faces of brick work or concrete surfaces in cement mortar (1:6) and finished surface fair and smooth without using extra cement complete all as specified and as directed.

M&L for rendering 5mm thick in CM (1:4) as on ceiling complete all as specified and directed.

M&L for preparation of new plastered surface of wall and applying two coats of oil bound distemper over a coat of primer and a coat of wall putty to achieve smooth finish complete all as specified and directed.

M&L for complete removal of existing treatment and preparation of old surface of walls and applying two coat of distemper oil emulsion distemper on wall incl applying a coat of wall care putty to achieve smooth finish to wall etc complete all as specified and directed.

M&L for preparation of new plastered surface of wall and applying two coats of cement base paint complete all as specified and directed.

M&L for preparation of new plastered surfaces of ceiling and applying three coats of white wash complete all as specified and directed.

M & L for complete removal of existing treatment and preparartion of old surfaces of walls and applying two coats of cement based paint on walls etc complete all as specified and as directed.

Taking up or down steel tubing and connections of 15 mm bore pipe complete all as specified and as directed.

Taking up or down steel tubing and connections of 20 mm bore pipe complete all as specified and as directed.

M&L for 15 mm nominal bore Mild steel galvanised water tubing, medium grade, with all fittings and fixed complete to walls and ceiling or laid in floors complete all as specified and directed.

M&L for 20 mm nominal bore Mild steel galvanised water tubing, medium grade, with all fittings and fixed complete to walls and ceiling or laid in floors complete all as specified and directed.

Fixing only 15mm bore old galvanised steel water tubing including cleaning with & including new fittings and fixed complete to walls and ceilings or laid in floors in new or old position complete all as specified and directed by Engineer-in-charge. Note: GI tubing retrieved vide item No 60.00 shall be used under this item.

Fixing only 20mm bore old galvanised steel water tubing including cleaning with & including new fittings and fixed complete to walls and ceilings or laid in floors in new or old position complete all as specified and directed by Engineer-in-charge. Note: GI tubing retrieved vide item No 61.00 shall be used under this item.

M&L Cutting chases, pinning in. making good to facings where required and pointing in cement mortar 1:3 to ends or edges of landings, steps, cills, sunshades, shelves, lintels, etc.; and cutting chases for concealed water tubing or concealed conduit wiring, etc., and making good, cutting not exc 10 cm girth

S&F 110mm bore PVC (SWR) pipes single socketed in any length with solvent joints laid In trenches or in floors including taking down old unserviceable PVC pipe and fittings complete all as specified and directed.

S&F 110 mm bore PVC (SWR) bends with oval access door any radius jointed with adhesive complete all as specified and as directed by Engineer-in-charge.

S&F 110mm PVC (SWR) vent cowl complete all as specified and as directed.

S&F in repair 15 mm bore bib tap, cast copper alloy, chromium plated, long body, fancy type screwed down and screwed for iron pipe or for brass ferrule complete all as specified and directed by Engineer-in-charge.

S&F in repairs 15mm bore angle cock one way fancy type, chromium plated, high pressure, with crutch or butterfly handle, screwed both ends of iron pipe or for union and fixed complete all as specified and as directed.

S&F in repair 15mm dia stop cock cast copper alloy, fancy type with, chromium plated long shank and cup (concealed type) with crutch or butterfly handle screwed down high pressure, screwed both ends for iron pipe complete all as specified & directed by Engineer-in-charge.

S&F in repair stainless steel kitchen sink 1 mm thick kitchen/laboratories with plug washer and waste including bedding in cement mortar and fixing cantilever brackets and connecting union to pipe overall size 495 mm x 420 mm bowl size 410 mm x 330 mm x 160 mm including making holes in brick walls for brackets and fixed in CM (1:3) or PCC 1:2:4 type B0 complete all as specified and directed by Engineer-in-charge. Make :- Nirali model Elegance (Glossy) / Prayag Gold Series (Gloss) / Silver Shine (Bluestar sanitary industries Pvt Ltd).

S&F in repair stainless steel plate rack of size 750mm x 600mm x 254mm made out of 0.63mm thick stainless steel of first quality complete all as specified and directed by Engineer-in-Charge. Make :- Nirali model Elegance (Glossy) / Prayag Gold Series (Gloss) / Silver Shine (Bluestar sanitary industries Pvt Ltd).

S&F CI nahani trap 100mm dia outlet plain with grating including jointing with solvent cement including jointing to waste pipe fixed in cement concrete 1:2:4, type B-1 complete all as specified and directed.

S&F in repair chromium plated Soap dish approximate size 160x160x90mm including chromium plated brass screws and plastic cleats complete all as specified & directed by Engineer-in-Charge.

S&F 15mm bore CP pillar taps, swan neck, fancy type, cast copper alloy (minimum weight 350 gm) along screwed down high pressure with lettered hot & cold with long screwed shanks and fly nuts screwed for GI pipe complete all as specified and directed.

S&F in repair Vitreous China squatting pan, ‘Orissa’ pattern, size 580 x 440 mm white, with integral foot rests including setting the trap and pan in concrete and 32mm dia PVC flush pipe complete including jointing to socket of flushing rim, complete all as specified and directed.

S&F in repairs PVC 10 ltrs syphonic action type flushing cistern, low level with inlet, ball valve, float and handle including brackets, flush pipe of PVC 32mm bore and connection to WC pan complete all as specified and directed.

S&F in repairs, vitreous China wash hand basin, white, flat back size 550 x 400mm including 15mm dia, 450 mm long HDPE PVC connection, 750 mm long 32mm bore HDPE waste down pipe including CI brackets complete all as specified and directed.

S&F in repair chromium plated shower rose with or without swivel joints including fixing to steel pipe of 125 mm size complete all as specified and directed.

S&F in repair for shower arm of 15mm bore, 195 mm long with bend of 45 degree with flange of CP of any colour and fixed complete all as specified and directed.

S&F in repair PVC connection 15mm size with PTMT nuts of length 450mm complete all as specified and as directed.

S&F rotational moulded polyethylene water storage tank triple layer of capacity 750 ltr (cylindrical vertical with closed top) hoisted and fixed in position with all necessary GI fittings all as specified in SSR Part-I including dismantling water tank of 750 Ltr capacity with ball valve & nipple complete all as specified and directed.

S&F 20 mm dia ball brass valve high pressure with polythene float and fly nuts complete screwed for iron pipes or brass ferrule and fixed complete all as specified and directed.

S&F Gun metal globe or gate valves, of 20 mm bore with iron wheel head, screwed both ends for iron pipe fixed in repair/replacement complete all as specified and directed.

S&F 32mm Waste fittings, brass, chromium plated for glazed ware wash hand basins, etc. with long screwed shanks and fly-nuts, flange end bedded in red lead cement and other end fixed complete all as specified.

S&F 40mm Waste fittings, brass, chromium plated for sink, etc. with long screwed shanks and fly-nuts, flange end bedded in red lead cement and other end fixed complete all as specified.

S&F 20mm GI nipple suitable for HDPE water tank complete all as specified and directed.

S&F low density poly ethylene waste pipes (LDPE) of 32mm bore complete suitable for wash basins, complete all as specified and directed.

M&L for 50 mm thick PCC (1:3:6) type C-2 using 40 mm graded crushed stone aggregate as in plinth protection, finished fair and even complete all as specified and directed by Engineer-in-charge. Note :- Plinth protection shall be laid to slope (1 in 30) in bays not exceeding 3 metre in length and joints of 6 mm wide and 10 mm deep shall be provided along the wall and bays and same shall be filled with sealing compound grade B. Cost of ceiling compund is included in the unit rate of this item.

M&L for Plain cement concrete type B1 (1:2:4), using 20 mm graded crushed stone aggregate, 50 mm thick, as in floor and finished even and smooth using extra cement laid in alternate bay complete all as specified and directed.

Taking down surface / concealed copper / aluminium point wiring (light, bell, fan, socket or power) complete, including fixtures and fittings such as switches, ceiling roses, lamp holders, pendants, sockets, regulators, tubelight fittings, bulb, etc and making good disturbed surfaces with plaster on walls, floors etc complete all as specified and directed.

M&L for point wiring with PVC insulated, unsheathed 2.5 sqmm FRLSH multistrand copper conductor cable 1100 volts grade drawn into and including rigid non metallic PVC concealed conduit medium grade not less than 20 mm dia ISI marked ivory colour with and including all conduit fittings and fixing accessories including not less than 1.60mm thick sunken anodised pressed steel terminal boxes/modular boxes suitable for fixing of modular face plates, 3.0 mm thick hylam sheet cover/modular plate cover for mounting switches, sockets, fan regulators etc incuding 1.5 Sqmm FRLSH multistrand copper conductor cable as continuous earth wire complete for the following:- (a) one light point controlled by one switch

All as per Sl item No 95.00 above herein before but for one bell point controlled by one bell push.

All as per Sl item No 95.00 above herein before but one socket out let 5 pins 5 Amp on the independent board complete all as specified and directed.

All as per Sl item No 95.00 above herein before but one socket out let 5 pins 5 Amp on the same board but with other switches complete all as specified and directed.

All as per item No 95.00 herein before but 4 Sqmm PVC insulated and unsheathed FRLS single core multistranded copper conductor incl 4 Sqmm PVC insulated and unsheathed FRLS copper earth wire for switch socket combination 3 pin 15 amps on independent board.

M&L for concealed submain wiring with PVC insulated FRLS-H multistranded copper conductor cable of size 06 Sqmm drawing into and including rigid non metallic PVC conduit, medium grade not less than 25 mm dia ISI marked ivory colour with all conduit fittings and fixing accessories and 06 Sqmm FRLS-H multistranded copper conductor cable as continuous earth wire including cutting chasing and making good disturbed surfaces as existing on the wall including taking down complete all as specified and directed. (Note :- two runs of 06 Sqmm copper wire and one run of 06 sqmm copper earth wire alongwith PVC conduit shall be meausred as one unit)

S&F socket out let, 6 pin 6 and 16 amps multi purpose 2 in 1 flush type 230 volt complete all as specified and directed.

S&F socket out let, 3 pin 6 amps multi purpose 2 in 1 flush type 230 volt complete all as specified and directed.

S&F switch Piano flush type 5 amp single pole one way 230 volts all as specified & directed.

S&F switch Piano flush type 15 amp single pole one way 230 volts all as specified & directed.

S&F ceiling rose of 65x50mm PVC/polycarbonate three terminal surface bakelite complete all as specifiend and directed.

S & F Switch Bell push 5 amp single Pole 230 V all as specified & directed.

S & F Bell ding dong type, AC 230 volts all as specified and directed.

S&F lamp holder insulated body with back plate batten/angle type for batten fittings complete all as specified and directed.

S&F LED bulb base B22 of capacity 10 watts not less than 700 lumens output at 6500K colour temp, complete all as specified and directed.

S&F in repair 10W integrated LED bulk head luminaire environment friendly, ultra modern, energy saving, surface mounted decorative oval bulk head with LED light, complete all as specified and directed.

S&F in replacement LED (1.2m) smartbrite extra batten made of CRCA sheet housing provided for efficient heat dissipation with a PC glossy diffuser duly prewired connection having a normal system lumen output of 2000 lumen/20 watt at a minimum system efficacy of 2000 lumen per 20 watt and total power consumption not more than 20 watt including driver of capacity 10 KA. It has a rated system life time of 25000 burning hours at L70 and should have a colour temperature of 6500 K, CRI>80, THD<10"%" AND PF>0.95 complete all as specified and directed.

S&F in replacement LED (0.6m) smartbrite extra batten made of CRCA sheet housing provided for efficient heat dissipation with a PC glossy diffuser duly prewired connection having a normal system lumen output of 1150 lumen/10 watt at a minimum system efficacy of 1150 lumen per 10 watt and total power consumption not more than 10 watt including driver of capacity 5 KA. It has a rated system life time of 25000 burning hours at L70 and should have a colour temperature of 6500 K, CRI>80, THD<10"%" AND PF>0.95 complete all as specified and directed.

Supply & fixing in replacement of MCB single pole 240 volt any rating from 6 to 32 amps, C series with rupturing capacity 10 KA complete all as specified and directed.

Supply & fixing in replacement MCB Single Pole Neutral 240 volt any rating from 6 to 40 amps, C series with rupturing capacity 10 KA complete all as specified and directed.

Supply & fixing in replacement sheet metal enclosure MCB distribution board Single Pole & Neutral 240 volts 12 way with 200 Amp rated bus bar double door with isolated Neutral bar & shrounded bus bar IP-43 having door earthing complete all as specified and directed.

Supply and fixing exhaust fans 300 mm sweep metallic body, heavy duty, four blade, double ball bearing, 1400 RPM, minimum air delivery discharge 1710 CMH suitable for SP, 230/250V, 50 Hz AC supply with protective bird guard with louver shutters including grouting of frame in wall and connecting with and including 3 run 1.5 Sq mm single core, PVC insulated but unsheathered FRLSH multistranded copper conductors cable from ceiling rose to exhaust fan complete all as specified and directed.

M&L for cutting/making hole 250/300mm dia in existing wall for fixing of Exhaust Fan including making good disturbed surfaces and matching with existing colour of walls complete all as specified and directed.

Supply, installation and commissioning (maximum energy efficient type) water heater storage type, five star electric complete of capacity 25 litres, heating element capacity 2 KW, vertical, ABS body glass coated anti rust tank, shock safe plug, Anode rod, 8 bar pressure complete including grouting of studs in wall in cement mortar (1:3) nuts, washers and provision of two numbers heavy duty flexible SS connection pipe of hot and cold of 600 mm long with brass nuts and two number brass chromium plated angular valve suitable for 15 mm bore pipe for water supply connection complete all as specified and directed.

Supply and fixing in replacement of burnt conventional fans with BLDC ceiling fans, 5 star rated by Bureau of energy with service value of not less than 7.00, (26W±10%) with or without remote, with rated speed 350 Rev per min, air delivery 220 Cum/min complete with blades, down rods, electronic regulator and accessories, 230 volt, 1200 mm sweep, suitable for single phase supply complete all as specified and directed. Note : Old unserviceable ceiling fan shall be deposited in AGE E/M store yard.

Taking down of smart prepaid meter with accessories & refixing the same after completion of surface work with nuts and bolts etc complete all as spcified and directed.

S & F in replacement IP 43 VTPN with MCCB incomer distribution board loadline DBs are fitted with bus bars, neutral links, blanking plates (without MCCB) suitable for MCCB upto 160 A as incomer complete all as specified and directed.

S&F in repair MCCB 3 Pole 63 Amps, 415 volts, 25 KA rupturing capacity with adjustable thermal & magnatic setting complete all as specified and directed.

Supply & fixing in replacement security light with LED street light, 35 Watt, IP - 66, Impact resistance - IK07, colour temp- 5700 K, Class-I in pressure die-cast aluminium alloy for housing (heat sink) for effective thermal management, sturdiness, excellent corrosion resistant, separate optical and control gear compartment & top opening for easy maintenance. Polyster powder coated grey after phosphochromate treatment High efficiency long life LED modules with SMD LED package mounted on MCPCB. Lumen efficacy of LED >110 lm/W with PC lens to ensure better uniformity of light distribution. Powered by Built-in, Potted electronic LED driver (SMPS based constant current supply) with lower THD, Output Open Circuit protection, Phase to Phase protection, Over Voltage protection, Surge Voltage protection upto 10 kV with external SPD & other safety tests as per IS 15885 Part-2/ Sec13 alongwith arm with single arm bracket OD 58 mm (max) with clamp, nut, bolts etc mounted on wall complete in all respect complete all as specified and directed.

Supply, laying, testing and commissioning cable XLPE insulated screened PVC bedded, galvanised steel strip or wire armoured, elecric power cables (heavy duty) 1100 volts grade with stranded aluminium conductor of size 25 sqmm 3.5 core including taking out old unserviceable cable complete all as specified and directed.

M&L for earthing complete with galvanized steel earth plate electrode 60cm x 60cm x 6mm thick burried directly in ground not less than 2.25 mtrs deep below normal ground level with top edge of the plate not less than 1.5 mtrs below normal ground level, surrounded from all sides with mixture of charcoal and common salt, connected to galvanized earth lead wire 4.00 mm dia by means of bolts, nuts, check nuts and washers of galvanized iron or steel protected by galvanised iron light grade 15 mm dia pipe and GI pipe 20mm light grade for water filling including 15x20mm reducer socket funnel wire mesh, RCC cover with concrete 1:2:4 using 8 mm# bar@100 mm c/c both ways ,PCC chamber pit with PCC (1:3:6) type C-2 and excavation and earth work,disposal of suplus spoil to a dstance not exceeding 50mtrs all as specified and shown on electrical plate No. 3 of 2009 (Part-I) complete including taking down old unserviceable earthing all as specified and directed. Note :- The unit rate includes for protection pipe and GI wire 4mm dia from top of earth plate up to 7.5 meter above ground level.

Supply, installation, testing & commissioning of inverter type split Air Conditioner (hot and cold), 5-in-1 convertible, PM 2.5 Filter with activated Carbon, with indoor , outdoor unit, full function wireless remote and auto restart feature, interconnecting copper tubing, insulation, interconnecting wiring etc in complete as per site requirement to provide rated cooling and heating as per specification laid as below:- (i) Rated Tonnage Capacity Range : 2.00 TR (ii) Rated Cooling Capacity in Watt : 6400 (Min - 2231 to Max - 7292) (iii) Rated Heating Capacity in Watt : 6400 (Min - 2238 to Max - 6772) Cont/-

Cont/- (iv) Rated Voltage : Single Phase 230 V ± 10%, 50 Hz (v) Rated Power Input (Cooling / Heating) : 2110/1900 Watt (vi) Rated ISEER : 3.9 or above (vii) Technology of air conditioner : Inverter Technology / twin rotary. Design of AC ambient temp -2ºC to 52ºC (viii) Function : Cooling, De-humidification and Heating (ix) BEE Star rating : Minimum 3 star rating or above as approved (as per specification of BEE effective from 1st July 2022) (x) Cooling/Condensing Coil : 100% Copper (xi) Indoor Noise Level : upto 48 dB (xii) Compressure type : DC/AC inverter-return cooled/Twin Rotary or equivlent Cont/-

Cont/- (xiii) Air Flow volume : 652 CFM or above (xiv) Moisture Removal : 1.9 Ltr/Hr (xv) Refrigerent piping dia : (1/4'' - liquid line 1/2'' / 5/8'' - gas line) with standard thickness & length of 3 mtr copper tubing insulated by nitrile rubber Note : MS stand heavy duty, powder coated made from MS sheet 12 G duly bended to size for installation of outer unit of split AC on wall complete with nuts, bolts washers, horizontal and vertical angle supports, dash fasteners dia 1/2'' x 4'' length - 6 Nos, rubber pads - 4 Nos to fit the out door unit as directed location will be deemed to be included at quoted rate.

S&F wall mounted voltage stabilizer of capacity 5 KVA in digital display for automatic operation with high/low cut off with TDR, single phase naturally air cooled indoor type & designed for input variation between 110 Volts to 290 Volts with output voltage stabilzed at 230 Volts with accuracy of (+/-) 2.5% complete all as specified and directed.

Supplying, installation, testing and commissioning of interconnecting copper pipe / tube work with elastomeric nitrile rubber / closed cell expanded ploythene tubular insulation suitable for 1.5/2.0 TR split Air conditioner units (for sunction and discharge lines) including brazing, benching required at site complete with all fittings such as bends, tees, elbows etc as per specification. Notes : (i) The quoted rates shall include rates for chiseling, making holes through walls & making good of wall and clamps etc. (ii) One run of suction pipe, one run of discharge pipe of same length will be measured as one unit length.

Supply & fixing PVC insulated and PVC round sheathed multistrand copper conductor 1100 volts grade circular cable/wire of size 2.5 Sq mm 3 core ISI mark from indoor unit to outdoor unit complete all as specified and directed.

S&F sheet metal enclosure Single pole & neutral with 2 pin and earth plug and socket 20A 240 Volt complete with one single pole MCB of cap 20 A, C series complete all as specified and directed.

M&L for Sub main wiring with 2 runs of 4 sqmm single core PVC insulated but unsheathed multistranded copper conductor FRLSH 1100 volts grade cable drawn through and in existing surface / recessed PVC conduit and connecting incoming/outgoing electric connections and one run of 4 Sqmm single core PVC insulated but unsheathed multistranded copper conductor FRLSH 1100 volts grade cable as earth conductor complete all as specified and directed. Note : Two runs of 4 Sqmm cable, one run of 4 Sqmm earth conductor and one run of PVC conduit of 25mm dia shall be measured and paid as one unit length.

Ahmed constructions (BID ID -3284968)

RANA CONSTRUCTION (BID ID -3285305)

R N AGRAWAL (BID ID -3285247)

ARCHI ENGINEERS (BID ID -3288355)

THENUA BUILDERS (BID ID -3285468)