Loading…
India Infra Updates on WhatsApp
Join the Tenderkart WhatsApp channel for India Tender Updates
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹18.1 LAccepted-AOC | L1 | Accepted-AOC Low rate | |
| 2 | L2₹18.7 L+₹54,358.51 (3.00%)Rejected-AOC | L2 | Rejected-AOC High rate |
Tender Value
₹22 L
EMD Value
₹22,000
Closing Date
7 Mar 2024, 3:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
Executive officer,Town Panchayat,s.kodikulam
Executive officer,Town Panchayat,s.kodikulam
Construction Of Annexure Library Building at Ward No 2 Eswari AmmanKovil Street Nedunkulam in S.Kodikulam Town Panchayat.
2024_DTP_432116_1
114/2024
Open Tender
Civil Works
Works
90 days
Town Panchayat, s.kodikulam
2nd class
2 documents required · 2 mandatory
₹0
₹22,000
Yes
Town Panchayat,s.kodikulam
30 Jul 2024
29 Feb 2024
7 Mar 2024
29 Feb 2024
7 Mar 2024
29 Feb 2024
4 Mar 2024
Amount
Earth work excavating and deposting on bank with initial lead of 10m& intial lift of 2m in hard stiff clay, stiff black cotton, hard red earth shales ,murram, gravel, stoney earth mixed with small size boulders etc completed as per std specification.
Collection Supply and Filling of Stone dust from approved quarry including cost and conveyance of all materials to site, loading and unloading charges and slacking the same to site to departmental gauge and filling to required depth, well rammed etc., Complete as per standard Specification
Cement concrete of mix 1:4:8 (One cement four sand eight aggregates) using 40mm guage hard broken including cost conveyance of all materials to site and labour charges, transporting and placing in position including shoring, forming protective bunds, cofferdams bailing out of water labour for mixing compacting, finishing and curing, working at depths, tools and plants and incidental charges such as sheeting, shoring and bracing and their subsequent removal etc., complete as per standard specification
Steel centering for side and sifits including supports and strutting upto 1m height for plain surface such as RCC slab with all cross bracings using mild steel sheet of size 90cmx60cmx10 gauge stiffened with welded miled steel angles of size 25x25x6mm for laid over silver oak for coundary wood joints of size 10x6.5 cm spaced at about 90cm centre to centre and supported by casurials props of 10cm to 13 cm dia spaced at about 75cm centre to centre and suppor etc completed as per std specification. A) Column
B) Grade beam
C)Ground Floor Lintel. Beam &slab
Supplying fabricating and placing in position of steel rods using TMT Steel including cost of binding wire, cost of labour charges for fabrication and placing in position etc. Complete. Complying with std. specifications.
Providing and laying in position Standardised Concrete Mix M-20 Grade in accordance with IS 456-2000 Using 20mm and down grade hard broken granite Stone jelly for all RCC items of works with mimimum cement contenet of 325 kg /cum and maximum water cement ratio of 0.55 incluting admixtur (plasticier /super plasticiser ) in recommended proportions as per IS 9103 to accelerate, related setting of concrete, improve workabillity without imparing strength and durabillity with about (5.0cum), 7730kg of 20mm machine crushed stone jelly and with about (3.3cum),5156 kg of 10- 12mm machine crushed stone jelly and with about (4.79 cum) 7670kg of sand but excluting cost of reinforcedment grill and fabricating charges centering and shuttering but incluting laying vibrating with machine vibrating ,finishing ,curring ,etc,,and providing fixtures like fan clamps in the RCC Floor /roof slabs wherever necessary without claiming extra cost etc., compete complying with standard specificaton and as directed by the departmental officer -The Coarse and Fine aggregates to be used should comply with the requirements of IS Standards. (No separate payments will be made by the depatment for the excess usage of materials )
Brick Work in Cement Mortor 1:5 Mix (one cement, five sand) using new best II Class Bricks of size 83/4"x41/4"x23/4" from approved quarry including cost and conveyance of all materials to site. Loading and unloading charges and labour charges for mixing, laying and curing etc. complete. Complying with std. specifications. BASMENT
Super structure GF
Collection Supply and Filling of well gravel from approved quarry including cost and conveyance of all materials to site, loading and unloading charges and slacking the same to site to departmental gauge and filling to required depth, well rammed etc., Complete as per standard Specification
Special Ceiling Plastering in cement motor 1:3 mix (one cement, three sand) 10 mm thick including cost and conveyance of all materials to site, loading and unloading charges and labour charges for mixing, laying and curing etc., complete
Plastering in Cement Mortor 1:5 Mix (one cement, five sand) 12 mm thick including cost and conveyance of all materials to site, loading and unloading charges and labour charges for mixing, laying and curing etc. complete. Complying with std. specifications.
Painting the new walls two coats over one coat of priming with best Ready mix plastic Emulsion paint of approved colour and quality including preparation of surface and finishing neatly etc., complete complying with standard specification and as directed by departmental officers (S.l.No.359-A)
Paving the floor with Vertified tiles of approved make and quality and clour of size 600x600x10mm in cement mortor 1:2 20mm thick and pointing with white cement including finishing jointing and polishing with glossy finish etc complete as per std specification
Paving the floor with Erocone design tiles for flooring of approved make and quality and clour of in cement mortor 1:3 20mm thick and pointing with white cement including finishing jointing and polishing with glossy finish etc complete as per std specification
Daddoing with glazed titles of size 300x200x6mm of approved make and quality and clour cement mortor 1:2 10mm thick and pointing with white cement including finishing jointing and polishing with glossy finish etc complete as per std specification.
UPVC Ventilator Specification: Supplying and fixing UPVC (Un-Plasticized Polyvinyl Chloride)Louvered Ventilators of from the profile the size of outerframe 60mm x 58mm and shutter profile size of 60 x 78mmboth profiles are reinforced with GI/1mm 125GSM and100% corrosion free, the profile are multi chamberedsections with wall thick of 2mm. The EPDM rubber (blackcolour) covered with all over the edges of frame and shutter.The corners and joints should be welded and cleaned.Radiations pin headed glass 4mm thick should be provided inthe louvers. The window should be fixed to the wall with100% packing with screws and silicon packing all round theframes. The ventilator should be got approved from theExecutive Engineer before use on work PWD SOR 2023-2024 P.NO :71
UPVC Window Specification: Supplying and fixing UPVC (Un-Plasticized Polyvinyl Chloride) Windows of casement type (open) from theprofile the size of outer frame 60mm x 58mm andshutter profile are reinforcement with GI/1mm 125GSMand 100% corrosion free, the profiles are multichambered sections with wall thick of 2mm. The EPDMrubber (black colour) covered with over all the edges offrame and shutter the shutter will be provided withEspag multi power point locks and also it operates as handle. The corners and joints should be welded andcleaned. Radiations free pin headed plain or browncolour glass 4mm thick should be provided to the shutter and it should not allow leakage of water evenat most ranging storms and should have key lockableaction, security protective hinges, strong locking systems and as per size for arresting noise and energyloss. The connecting mechanism between sash andouter frame that enables opening of the window. The window should be fixed to the wall with 100% packingwith screws and silicon packing all round the frames.The window should be got approved from the ExecutiveEngineer before use on work PWD SOR 2023-2024 P.NO :70
Supplying and fixing M.S.grill to doors, special windows and ventilators etc as directed by the departmental officers inclusive of cost of MS grill including one of cost red oxide and fixing in position etc., complete (as per the schedule of rate) SL.NO.182 Q3
Painting the new iron work in all floor two coat of best synthetic enamel paint of approved colour and brand over one coat of primer including scrapping and preparation of surface, cost of breshes and neat finishing complying with stadard specifications
Fabricating, supplying and fixing in positon of SOLID PVC DOORS with frames of different sizes as per the specifications given below: PVC door frames made out of best quality PVC extruded section of 40mm * 58 mm * 2.50 mm +/- 0.3 mm thick, having multichamber cross section and duly reinforced with steel to be mitre cut at the corners and welded including providing tie rod at the bottom and necessary weather seal etc., and PVC door shutters made out of extruded plastic section of 60 mm * 24 mm size in the configruation of an "A" section for shutter frames and multi-chamber hollow plastic section of 200 mm *200 mm*1 mm (average thickness) with tongue and groove section for panels etc., with necessary holdfasts, rubber beedings, furniture fittings, locking arrangements etc., complete including dimantling the masnery, making chippings, holes in the RCC column, beam etc., wherever necessary with power drill to the extent required and redoing the same to the original condition after fixing etc., complete as per specifications and as directed by the dePart ofmental officers.
Weathering corese in cement motor 1:2 line mixed with all set in brick jelly concrete 1:4:8 Mix concrete 10 cm thick using 20mm brick jelly and top finished with c.m. 1:3 mix 20mm thick without any leakage etc. complete.
Finishing with top of roof with one course of machine pressed tiles of size 23cmx23cmx23cm of approved quality laid in cement mortar 1:3 (One cement and three sand) 12mm thick mixed with water proofing compound conforming to ISS by 2% weight of cement used and the joint pointed neatly to full depth of tiles with same water proofing compound mixed with cement motar ,red oxide, etc.complete
Supplying and fixing in Position of Europeon type water closet with all set in brick jelly concrete 1:4:8 Mix concrete 10 cm thick using 20mm brick jelly and top finished with c.m. 1:3 mix 20mm thick without any leakage etc. complete.
Earthing as per the ISI specification with an earth electrode of 2.10 metre Class 'B' GI pipe of dia not less than40mm with copper earth plate of size 125mm x 50mm x 6mm with necessary funneling arrangements with necessary masonry work and with 38mm RCC cover slab for the brick masonry SD 233
Supply and run of 1 of No.8 SWG GI wire for earth connection SD 75
Supply and run of 2 of 1.5 sq.mm. (22 / 0.3) PVC insulated SC unsheathed copper conductor of 1100V grade inrigid pipe concealed in wall and ceiling with continuous earth wire connection of 14 SWG TC wire and making good of the concealed portion with suitable colour SD 55
Supply and run of 2 of 1.5 sq.mm. (22 / 0.3) PVC insulated SC unsheathed copper conductor of 1100V grade in suitable PVC rigid pipe on wall and ceiling with continuous earth wire connection 14 SWG TC wire with painting of suitable colour SD 54
Supply and fixing of TNEB meter board suitable for 32A three phase service connection with 3 Nos. 32A fuse unit (500V) 32A neutral link and earth link (1" x 1/8" copper flat) on TW plank of size 600mm x 450mm x 19mm with supporting TW reepers of 1" thick an either side with painting with suitable bolt and nuts for fixing the TW plank on wall with earth connection and inter connection with 7/20 PVC insulated copper wire from EB meter to fuse unit SD 127
Wiring with 2 x 1.5 sq.mm. (22 / 0.3) PVC insulated SC unsheathed copper conductor of 1100V grade in suitable SD 23 PVC rigid pipe concealed in wall and ceiling with PVC accessories in flush with wall with 3mm thick hylum sheet cover with TW switch box and 5A FT switch with continuous earth wire connection of 14 SWG TC wire for making good of the concealed portion with suitable colour for PVC concealed light point / fan point (for electronic regulator) SD 23
Wiring with 2 x 1.5 sq.mm. (22 / 0.3) PVC insulated SC unsheathed copper conductor of 1100V grade in suitable PVC rigid pipe concealed in wall and ceiling with PVC accessories in flush with wall with 150mm x 100mm x 113mm TW switch box with 3mm thick hylem sheet cover for 5A 3 pin non inter locking wall socket with 5A flush type switch with continuous earth wire connection of 14 SWG TC wire and making good of the concealed portion with suitable colour for concealed PVC plug point SD 38
supply and fixing of 18W LED Round type Recessed fitting with LED (Higher end) on false Ceiling from ceiling with PVC unsheathed copper leads from terminals to the fitting. SD 530
Supply and fixing of 1200mm (48") AC ceiling fan complete with stepped electronic 300W regulator with 300mm down rod on the existing clamp SD 110
Solid PVC Door Shutters using 19 Gauge 19mm MSsquare tubes for styles and outer frames. 15mm MSsquare tubes for top, lock and bottom rails. The steel tubes shall be covered with 5mm thick solid PVCSheets. Shutter using 5mm thick solid PVC Sheets forpanelling shall rigidly fixed in position including necessary furniture and fittings. The over all size ofstyles shall be 50mm x 30mm. The over all size of toprail, lock rail and bottom rail shall be 75mm x 30mm.The over all size of frames shall be 50mm x 45mm with suitable rabate for housing the shutter PWD SOR 2023-2024 P.NO: 48 Solid panel PVC door with frame
Stainless Steel (Salem Stainless Steel) Door Frame(Box Section using Stainless Steel Plate of 1.6mmthick) of size 100mm x 60mm with a rebate of 30 /35mm x 15mm on one side of the frame including supplying and fixing dovetail splayed end stainlesssteel hold fast etc PWD SOR 2023-2024 P.NO 49
Supplying & fixing doorshutters for Mediun DensityFiber Board of exteriorgrade 35 mm thick,singleleaf conforming toIS:12406/1989 with 35x12mm T.W.Lipping on alledges with necessaryadhesives and CP screwscomplying with standardspecifications. The rate is inclusive of threee coats ofbest quality varnish butexcluding cost of furniturefittings.such as 300 mmtower bolt 2nos,200mmtowerbolt I no. 300mmAldrop 1 No. Aluhandleornamental type 2 Nos,and1 No. Door stopper etccomplete.PWD SOR 2023-2024 P.NO: 47
Manufacturing, Supplying and Fixing of Stainless Steel Handrails for staircase using 50mm dia 304L Grade Stainless Steel pipe of 1.60mm thick at required locations to a height of900mm from finished floor level welded to 38mm diaStainless Steel pipe post of 1.00mm thick as vertical at 900mm centre with 2 Nos. of 25mmdia intermediate horizontal stainless steel pipe of 1.60mm thick in between.The vertical pipe has to be welded to the 100 X 100 X 6mmMS base plate encased in the base concrete. The rate isinclusive of the charges for cutting, bending, welding,grinding, polishing, conveyance, electrical charges, etc. complete PWD SOR 2023-2024 P.NO 62
18W LED 3000K Round Type Recessed Fitting with LED PWD SOR 2023-2024 P.NO 121
Supply and fixing of 400mm Sweep-wall mount fan PWD SOR 2023-2024 P.NO 125
Supply and delivery and fixing of HDPE tank asper IS 12701 / 1996 including loading, unloading, transportation and labour charges forfixing of the GI pipes and specials forpipe connection works including cutting, threading and fixing charges etc., TWAD SOR 2023-2024 P.NO: 92
Supply and Delivery of PVC Pipes GI Pipes HDPE Hose and Specials etc complete. 25 mm Upvc pipe
32 mm Upvc pipe
25mm Pipe coupler
32mm Pipe coupler
25mm Pipe elbow
32mm Pipe elbow
25mm Pipe Bend
32mm Pipe Bend
25mm Pipe Tee
32mm Pipe Tee
25mm Pipe end cap
32mm Pipe end cap
25 mm x 20 mm Reducer
32 mm x 25 mm Reducer
25 mm x 20 mm Reducer Tee
32 mm x 25 mm Reducer Tee
25 mm x 20 mm Reducer Elbow
32 mm x 25 mm Reducer Elbow
25mm Pipe Jet Nipple
32mm Pipe Jet Nipple
Wash Hand Basin of size 550mm x 400mmWhite with pedastal
Supplying and fixing inposition 15mm dia C.P.Shower rose & stopcock of approved makeconfirmingtoISspecificationsandqualityincluding cost of Shellacthread etc. complying withstandard specification . Chromium Plated Shower Rose - 100mm dia
Stop Cock
Supplying and fixing in position C.P. Towel rail 600mm long and 20mm dia with brackets of same materials including cost of teak wood plug and C.P. Screws etc. complete Brass Chromium Plated Towel Rail 60cm long and 20mm dia with Brackets
Brass Chromium Plated Towel Rail 60cm long and 20mm dia with Brackets
Supplying and fixing in position C.P. Soap tray of size 150 x 150mm including cost of teak wood plug and C.P. screws. etc. complete complying with standard specification. Chromium Plated Soap Tray of size 150mm x 100mm
Charges for conducting Geophysical survey to lcate favorable point for drilling borewell point including cost of transformation of machinery and labour charges etc. complete complying with standard specification. (Approved local rate)
Drilling 150 mm” dia deep vertical bore well in hard rock area in any Required depth as decided by the departmental officer including inserting the casing pipe etc complete as per standard specifications
Supply and delivery of 150mm PVC casing pipe (CM) including cost and conveyance of all materials and all labour charges etc complete as per standard specification.
.Supply of single phase Sub mersible motor with Pump set as per ISI 8034 with Panel board of 20 lpm X 125 M of approved quality including cost and conveyance of all materials and all labour charges and other incidental charges to site etc., complete as per standard specification.
Laboar charges for the erection of submersible pumpset in Borewell including fixing jointing submersible cable with proper clamps up to starter to required depth ande also fixing of riser pipes to the recquired depth valves erection clamps,pressure gauges upto the exterior wall of pump room and erection of panel board consisting of TPICN switches starter, voltmeter,Ammeter,Three pilot (indicating) lamps capacitor single phasing preventor,Water level guard and laying and jointing the cables and twin earthing as per IE rules etc., complete and testing the pumpset and trail run for 10 days
BABUNATHAN AND CO (BID ID -1008951)
stage.html
html • 0.04 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .