PROVN OF 02 STORE ROOM IN COMD MESS AREA AND COVERED PARKING SHED FOR TWO WHEELER AT 41 INF BDE CAMP UNDER GE EAST LUCKNOW

Amount

Excavating in trenches n.exc. 1.5 mtr wide & n. exc. 1.5 mtr deep in depth for foundation/ cable laying etc. soft/loose soil & getting out complete all as specified and directed.

M & L for PCC (1:5:10) type E-2, using 40mm graded stone aggregate as in foundataion fiiling & mass concrete complete all as specified and directed.

M&L for brick work with old size fly ash bricks, straight or curved on plan exc 6m mean radius in CM 1:6 complete all as specified and directed.

Returning, filling in including spreading, levelling watering & well ramming in layers n.exc. 25CM thick in soft/loose soil complete all as specified and directed.

Spreading & levelling in layers n.exc. 25 CM thick well ramming including watering as required.complete all as specified and directed.

Removing excavated mtrl n.exc.50 Mtr & depositing where directed at a level n.exc.1.5Mtr above the starting point.complete all as specified and directed.

M&L for 75mm thick PCC (1:4:8) type D-2, using 40mm graded stone agg as in sub base of flooring complete all as specified and directed.

M&L for machine cut kota stone slab mirror polished flooring 18-20 mm thick over and including 20mm thick screed bed in CM 1:6 laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and mirror polishing complete all as specified and directed.

All as per Item No 8 above but as in skirting, dado over 10mm thick rendering in CM (1:4) complete all as specified and directed.

Supply only water proofing compound complete all as specified and directed.

M & L for DPC in PCC (1:2:4) type B-0 to horizontal or vertical surfaces including necessary formwork 40mm thick. complete all as specified and directed.

M & L for rendering 15mm thick in CM(1:6) on other than fair faces of brick/concrete work/stone masonry finishing even & smooth without using extra cement.complete all as specified and directed.

-dito- as item no 12 above but in CM (1:4) on fair faces of brick work.complete all as specified and directed.

-ditto- as item no 12 above but 5mm thick in CM(1:3) on ceiling complete all as specified and directed.

S&F 1mm thickness of laths Steel rolling shutters, with out ball bearing, as specified including top cover, anchoring rod, hasp and staple and one shop coat of primer; erected in position as indicated, complete; push pull or manual type complete all as specified and directed by Engr -in-Charge.

S & F suitable ball bearing for rolling shutters.complete all as specified and directed.

S & F safety lever locks mild steel with 4 levers for rolling shutters complete all as specified and directed.

S & F steel windows with side hung shuter including projecting type hinges with steel handle, and steel peg stay, complete with glazing bars.complete all as specified and directed.

S&F Sheet glass 3 mm thk ordinary quality & glazing with oil puty in square n.exc. 0.5 sqm in each pane.complete all as specified and directed.

M&L for preparation of new or previously untreated steel surfaces of any description, over 10 cm width or girth, not otherwise described and applying two coat of synthetic enamel paint over a coat of red oxide zinc chrome primer complete all as specifed and directed.

M & L for RCC M-25(design mix) type B-1, as in slab supported on walls beams & columns in floors, roofs, landing using 20mm graded stone agg complete all as specified and directed by Engr-in-Charge

M&L for RCC design mix (M-25) using 20 mm graded stone aggregate for foundation footings plinth beams, cloumns etc complete all as specified and directed. by Engineer -in-charge. Note Reinforement shall be measured and paid seperately under relevent item.

M&L for M-25 RCC(design mix) for Columns, pillars, piers, posts and struts complete all as specified and directed by Engr-in-Charge.

M&L M-25 for RCC Design mix type B-1 as in lintels, beam etc. over 1.5mtr span.complete all as specified and directed.

M&L for RCC nominal mix M-25 type B-1 as in Chajjas complete all as specified and directed.

M&L for TMT bars 10mm dia & over cut to length bent to shape required including, cranking binding with & including MS wire not less than 0.90m dia or securing clips.complete all as specified and directed.

-dito- as per item no-26 above but MS bar as in stirrups, spacers & binders etc. 5 mm dia and over up to and including 10 mm dia bar.complete all as specified and directed.

M & L for formwork to sofits of suspended slabs as roof slabs, floor slabs & similar work n.exc. 250mm thick on rough finished surface of concrete.

-ditto- as item 28 above but to sides and soffits of beams , lintels etc.complete all as specified and directed.

ditto as item 28 above but to chajjas including edges complete all as specified and directed.

M&L for Formwork to edges of concrete flats n.exc. 10cm wide complete all as specified and directed.

M&L for formwork to rough finish surface of flat sides of concrete foundations, footings, bases of columns, raft and raft beams, sides and soffits (if any) of foundation and plinth beams; and similar work; vertical or to batter complete all as specified and directed.

Ditto as per item No 32 above but to sides of rectangular pillars, posts, columns etc.complete all as specified and directed.

M&L for three coats of white wash on newly plastered surface of wall including preparation the surface of walls complete all as specified and as directed. (internal)

M&L for two coats of cement base paint on newly plastered surface of walls incl preperation the surface of walls complete all as specified and as directed. (External)

-ditto- as item No 35 above but on ceiling complete all as specified and directed.

M&L for Hardcore of guage n.exc. 63mm, deposited spread & levelled in layers n.exc.15CM thick, waterd & rammed to a true surface using broken bricks 50 MM thick.complete all as specified and directed.

M&L for 75 mm thick PCC 1:3:6 type C2 using 40 mm graded crushed stone aggregate as in plinth protection surface finished fair and even without using extra cement complete all as specified. Note :- Plinth protection shall be of width as directed and shall be laid to slope of 1:30 in alternative bays not exceeding 3 meter in length. Joints of 6 mm wide and 10 mm deep shall be provided along the wall and bays and same shall be filled with bitumen mastic (1:3).complete all as specified and directed.

M&L for Continuous brick edging 75mm wide with brick laid on end vertically with sub class 'B' brick complete all as specified and directed.

M & L for rendering 20mm thick in CM(1:4) on fair faces of brick/concrete work with WPC and finishing the surface even & smooth without using extra cement. complete all as specified and directed.

M&L for Sand filling under floors or in foundation or cushinoung for protection of cables including watering and consolidation complete all as specified and directed.

M&L for ATT treatment the soil under plinth protection at the rate of 5 litres of emulsion per square metre of surface area complete all as specified and directed.

M&L ATT treatment top surfaces of filled earth at the rate of 5 litres of emulsion per Sqm of surface the soil under plinth protection at the rate of 5 litre of emulsion per square of surface area complete all as specified and directed.

M&L for ATT treatment the soil along with external perimeter of building at the rate of 2.25 litre of emulsion per metre of the perimeter wall complete all as specified and directed.

S&F mild steel work as in framed work as in grill with ends of bars shouldered and riveted or fixed in spike framed guard bars confirming to Fe-410-0 or Fe 310-0 complete all as specified and as directed.

Excavating in post holes (or similar holes) each n exc 0.5 cum, getting out, returning, filling in and ramming earth or broken rubble mixed with earth around, in layers not exceeding 25cm in any type of soil complete all as specified and as directed.

M&LCement concrete 1:3:6 type C2 using 40 mm graded stone aggregate in foundations, filling and mass-concrete complete all as specified and as directed.

S&F mild steel joist, channel, angle, or tee sections as in posts fixed independently, without connection plate, etc. (cut to ordinary lengths i.e. within 20mm of the length indicated) of Fe-410-W (Gde E-250) complete all as specified and as directed.

S&F for trusses (framed), trussed, purlins, crane gantries, rails and fastenings and heavy bracket framing (Beam, tee, angle, channel or flat sections) including distance pieces, cleats etcof FE410-W (Gde E-250) complete all as specified and as directed.

S&F pre-painted galvalume aluminium zinc coating GI based corrugated steel sheet 0.50mm of an colour having tensile strength of 550Mpa as in roof covering/cladding to wall, fixed with self tapping screws complete all as specified and as directed.

S&F of pre-painted galvalume aluminium zinc coating GI based Plain steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in room covering/cladding to wall, including ridge cover fixed with self tapping screws etc complete all as specified and as directed.

Surface excavation not exc 30 cm deep averaging 15 cm deep and getting out in soft/ loose soil. complete all as specified and as directed.

M&L for Providing of earth filling with approved earth,spreading, leveling & compecting n exc. 30 cm thick Layer, watering, ramming/rolling and finishing to required size, shape,etc.n exc. 1.5m high from base inc bringing of approve earth.complete all as specified and as directed.

M&L for 100mm thick PCC type D-2 1:4:8 (40mm graded stone aggregate) for sub base.complete all as specified and as directed.

M&L for Providing and laying 60mm thick factory made chamfered edge cement concrete paver block of M-35 grade with approved colour, design & pattern as in footparth, parks, lawns, drive ways or light traffic parking etc., of required strength, thickness & size/ shape, made by table vibratory method using PU mould, laid in required colour & pattern over and including 30mm thick compacted bed of fine sand, compacting and proper embedding/ laying of inter locking paver blocks into the sand bedding layer through vibratory compaction by using plate vibrator, filling the joints with sand and cutting of paver blocks as per required size and pattern, finishing and sweeping extra sand complete all as specified and as directed.

Material and Labour for point wiring complete with 1.5 sqmm (nominal area) FRLS grade PVC insulated, unsheathed multi stranded copper conductor single core cable 1100 volts grade in and including PVC conduit with accessories including 1.5 sqmm FRLS grade PVC insulated unsheathed stranded copper conductor cable for earth continuity conductor and connected to common earth dolly for One light/Ex-fan point controlled by one switch 5Amps SP complete all as specified and as directed. Note :- Sunken box/cover plate for modular switches, sockets etc will be measured and paid seperately under relevant items and blank plate required if any will be deemed included in the item rate.and making good disturbed surfaces of wall , floor etc and matching wth original colour of wall complete all as specified and as directed.

All as per Item No 56 hereinbefore but for One 5 A socket outlet on independent Board complete all as specified and as directed.

All as per Item No 56 hereinbefore but for One 5 A socket outlet on same Board complete all as specified and as directed.

All as per Item No 58 hereinbefore but point wiring complete with 2.5 sqmm for 3 pin 15 A socket outlet on independent board including 2.5 sqmm FRLS grade PVC insulated unsheathed stranded copper conductor cable for earth continuity conductor complete all as specified and as directed.

Supply and fix frame plate with match cover but three module complete all as specified and as directed.

Supply and fix frame plate with match cover eight module complete all as specified and as directed.

Supply and fix terminal box suitable but three modular plat of size 100X75x50 mm including cutting, grooving and plastering etc. complete all as specified and as directed.

All as item No 62. above but eight modular plate of including cutting, grooving and plastering etc. complete all as specified and as directed.

Supply and fix Modular switch one way 6A 230V AC 50 HZ SP one module complete all as specified and as directed.

Supply and fix Modular switch one way 16A 230V AC 50 HZ SP one module complete all as specified and as directed.

Supply and fix Modular socket 2/3 pin combined 6A 230V AC 50 HZ SP two module complete all as specified and as directed.

Supply and fix Modular socket 6A/16A 2/3 pin combined 230V AC 50 HZ SP two module complete all as specified and as directed.

Supply and fix Modular Regulator 230V AC 50 HZ SP two module complete all as specified and as directed.

S&F in factory made Pantone 7541C shade powder coated distribution board 4 way TPN DB Double door with metal double door (IP-43 protection) fabricated of CRCA sheet and fixed on wall and suitable for universal mounting and including 200 Amps bus bar, Neutral bar, Standard din rail,earth bar and cable ties for cable management, top and bottom removable gland plates with provn for MCB TPN and RCCB as incomer and 12 SP MCBs outgoing complete all as specified and conforming to IS :8623 along with cable end box for above DB.complete all as specified and as directed.

Supply and fix of MCB DB SPN 8 way double door type suitable for TP/FP including necessary dummy plate and necessary civil works complete all as specified and as directed.

Supply and fix MCB SP 230V, 6-32 Amps capacity complete all as specified and as directed.

Supply and fix MCB SPN 230V, 32 to 63 Amp capacity complete all as specified and as directed.

S&F Ceiling rose PVC polycarbonate complete all as specified and as directed.

Supply and fixing of wall/surface mounted integrated batten LED light luminaire of 4ft length with a system wattage of 20-22W with a nominal system lumen output of 2000-2200 lumens and a minimum system efficacy of 100Lm/W. CCT shall be 6500K and CRI ≥ 80. Housing shall be extruded aluminimum with powder coating & with IP20 protection, The luminaire shall meet IP20 rating with surge protection of 2.5KVA, THD ≤10% and PF ≥ 0.95, complete all as specified and as directed.

Supply and fix in replacement 45W Pressure die cast aluminium housing street light with system lumen of 6300 lm and system efficacy of 140 lm/w, IP-66,IK-10 single piece die cast incl spigot, dia 48-76mm,LED lifetime (L70B50) 75k Hrs with integrated optical cover. Street light should have standalone lighting control system with AUTO ON/OFF based on DUSK/DAWN timings,preset time settings with monthly variations (Jan to Dec), inbuilt real time clock for switching, incleds dimming profile for energy savings,drift not exceedind max 2mins/year, clock retention upto five yeras, auto switching off secondary power for module,dimmable driver based on PWM control, dim to off with high/low voltage cut off with 440V protection for 8 hrs for complete luminiarie incl driver and astro module,surge protection as perIEC 61000-4-5 all as specified and directed by engineer in charge. complete all as specified and as directed.

Supply and fixing ceiling fans complete with blades, down rods, electronic regulator and accessories, 230 V, 1200 mm sweep. Min air delivery 210 CFM with service value 6.00 BEE. Five star rated with brushless direct current motor (BLDC) complete all as specified and as directed.

Supply, laying and testing cable XLPE Insulated ,screened, PVC bedded, galvanized steel strip or wire armoured, electric power cables (heavy duty) 1100 Volts grade with stranded aluminium conductor of size 10 sqmm 4 core complete all as specified and as directed.

M&L for Returning, filling in, including spreading, leveling, watering and well ramming in layers not exc 25 cm thick in soft/loose soil complete all as specified and directed.

Supplying & laying common bricks sub class B for LT cable for protection of cable complete all as specified and directed.

Supply & fix HDPE pipe DWC grade 80mm bore in trench/ wall/floor for protection of Cable including making good of the distubed surface complete all as specified and as directed.

Supply and fixing steel body exhaust fan 450 mm sweep AC single phase, 230/240 volts 50 Hz with louvers incl cutting of suitable holes and matching with the existing colour of wall and making connection from ceiling rose with twisted copper flexible wire 23/0.076 mm complete all as specified and as directed.

Material and labour Earthing complete with galvanized steel earth plate electrode 60 cm x 60cm x 6mm thick buried directly in ground (earth pit not less than 2.25 mtrs deep below ground level) with top edge of the plate not less than 1.5 mtr below normal ground level, connected to galvanized earth wire of size 4mm dia by means of bolts, nuts, check nuts and washers of galvanized iron or steel all as shown in electrical plate No 3 connected to earth testing point including necessary excavation, earth work, PCC pit ,RCC cover 1:2:4 B1 with 8 mm dia MS rounds 1.5 kgs, funnel ,watering pipe etc. all specified and directed including testing on completion complete all as specified and as directed.

Material and Labour for Submain wiring with 2 runs of FRLS grade PVC copper conductor cable 4 sqmm, multistranded along with FRLS grade PVC insulated copper earth continuity conductor 4 Sqmm drawn through & including PVC Conduit pipe 20 mm dia with all fittings complete all as specified and as directed.

QUALITY CONSTRUCTIONS CO (BID ID -3287908)

M/S KAUSHIK CONSTRUCTION (BID ID -3288262)

MS SANTOSH KUMAR SINGH (BID ID -3291037)

GANGA TRADERS (BID ID -3288100)