REPAIR TO FLOOR JOINERY WALL PLASTER WATER SUPPLY PLUMBING WORK PATH FENCING COMPOUND WALL ETC IN EM INSTALLATIONS IN AREA UNDER AGE BR I AT NAVAL STATION KARANJA

Amount

Dismantling and taking down water storage tanks of 500 Ltr capaciaty and S&F 500 ltrs capacity rotatonal moulded polyethylene water storage tanks Triple layer in white colour (cylindrical vertical with closed top) hoisted and fixed in position all as specified in SSR Part I including S&F of ball brass valve high pressure of 20mm dia with inlet & outlet coneections etc complete all as specified and directed

Dismantling and taking down water storage tanks of 1000 Ltr capaciaty and S&F 1000 ltrs capacity rotatonal moulded polyethylene water storage tanks Triple layer in white colour (cylindrical vertical with closed top) hoisted and fixed in position all as specified in SSR Part I including S&F of ball brass valve high pressure of 25mm dia with inlet & outlet coneections etc complete all as specified and directed

Taking down unserviceable shutter of any description exc 1 Sqm but n. exc 2 sqm complete all as specified and directed

Taking down chowkhat or frame with shutter (without taking off shutter from the frames) n. exc 1.5 Sqm each of steel windows/wooden door/PVC door complete all as specified and directed

Taking down chowkhat or frame with shutter (without taking off shutter from the frames) exc 1.5 Sqm but n.exc 4 Sqm each of door/ windows complete all as specified and directed

S&F IInd class hard wood 35mm thick Factory made plain framed panelled shutter any number of panels of with lock rail and panel of 9mm BWP commercial ply or 12mm veneered partical board with commercial veneering on both faces. The size of rail and stile as per IS 1003 (Part-I), kiln seasoned and chemically pressure treated complete all as specified and directed

S & F IInd class hard wood plain soid, straight, chowkats and frames wrought framed rebated on the solid, rounded or chamfered put together with glue pinned at joints complete all as specified and directed

S&F factory made solid panel PVC door shutter 30mm thick (Style) consisting of frame made out of MS tubes for top and bottom rails MS frame shall be covered with heat moulded plain colour PVC 'C' channel having a PVC sheet strips of 20mm width stuck inside with solvent cement for tiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail, panelling of plain colour PVC sheet to be fitted in the MS frame welded/sealed the stiles and rails with suitable PVC Sheet beading and jointed together with solvent cement supplying & fixing in the frame at site all as specification and drawing for item No 879 in SSR part II 2004 complete all as specified and directed

S&F solid PVC door frame of size 50x47mm made out of 5mm plain colour PVC sheet reinforsed with M\S squre tube supplying and fixing in opening as per specification & drawing complete all as specified and directed

S & F Prelaminated particle board, 18/19mm thick interior grade, prelaminated one side with decorative choice lamination & oher side balancing white lamination, fixed with screws to timber frame/metal work as in cup board shutter, shelvas etc fixed in repair complete all as specified and as directed.

M & L Plain fillets square, rectangular or triangular in section, clean swan, secured with nails or brads sectional area n.exc 3 Sqcm complete all as specified and directed.

S&F 200mm long aluminium anodized barrel tower bolts of extruded sections complete all as specified and directed.

S&F 150mm long aluminium anodized barrel tower bolts of extruded sections complete all as specified and directed.

S&F 300mm long aluminium, anodized sliding door bolts with hasp & staple (bolt type) and fixing clips of sheet cost of extruded sections and fixing bolts and sliding bolts of extruded section or cast aluminium alloy complete all as specified and directed.barrel tower bolts of extruded sections complete all as specified and directed.

S&F Aluminium tower bolt 150mm long complete all as specified and directed

S&F Aluminium handle 150mm long complete all as specified and directed

S&F butt hinge size 100mm extruded Aluminium alloy with galvanised mild steel hinges pin,anodised and fixed type complete all as specified and directed

M&L for preparation of new wooden surfaces of any description not otherwise described over 10cm width or girth priming coat with pink primer and applying two coat of sythentic enamel paint complete all as specified and directed

M&L for preparation of old wooden surfaces of any description not otherwise described over 10cm width or girth and applying one coat of sythentic enamel paint complete all as specified and directed

S&F in repairs stainless steel wire cloth 0.18mm nominal dia of wire and average width of aperature 1.40mm with 8% nical fixed with tinned tacks or galvanised wire stapler complete all as specified and directed

M&L preparation of new steel surfaces of any discription over 10cm width or girth not otherwise described and apply two coat of synthic enamel paint over one coat of red oxide primer complete all as specified and directed

M&L preparation of old steel surfaces of any discription over 10cm width or girth not otherwise described and apply one coat of synthic enamel paint complete all as specified and directed

Demolition of Cement Concrete (unreinforced) concrete in ground floors and pavings n exc 15 cm Thickness (below or above ground level) complete all as specified and directed

M & L PCC (1:3:6) type C-2 using 40mm graded agg as in 75mm thick as in plinth protection/footpath. finished even & smooth using extra cement complete all as specified and directed

M & L 100 mm thick PCC 1:2:4 Type B-2 (using 40 mm graded aggregate ) as in hard standing and similar works etc finished cement concrete surface even and smooth without using extra cement complete all as specified and as directed.

M & L for PCC (1:3:6) type C1 using 20mm graded stone aggregate in coping, bed block etc including necessary form work complete all as specified and directed.

M & L for Cement concrete foundation filling and mass concrete type D-2 1:4:8 (40mm graded Aggregate) complete all as specified and directed

M & L cement concrete Type B-1 1:2:4 (20mm graded Aggregate) in bands, plinth courses, string courses, lacing courses, parapets and railings upto 60 cm in height, copings, kneelers, apex stones, bed plates, kerbs, water troughs and the like including weathering, slightly rounded or chamfered angles and throating,including neccecery formwork as directed

Extra for forming fair finished drain or channel exc 30cm inner girth in cement concrete, using extra cement, including forms, moulds mitres/ stopped ends complete all as specified and directed

Taking down cement plaster on stone wall etc including racking out of joints hacking for keys scrubbing down with water complete all as specified and directed

M&L for cement plaster rendering 15mm thick in CM 1:6 on fair faces of brickwork or concrete surface as on wall finished even and smooth with thin layer of sagol complete all as specified and directed.

M&L for cement plaster rendering 05mm thick in CM 1:3 on fair faces of brickwork or concrete surface as on ceilling finished even and smooth with thin layer of sagol complete all as specified and directed.

M&L for cement plaster rendering 20mm thick on fair faces of brick/concrete surfaces with two coats i.e. (15mm thick backing coat in CM 1:6 and 5mm thick finishing coat in CM 1:4), finished even and smooth without using extra cement (WPC to be measured and paid separately) complete all as specified and directed.

Supply only Integral waterproofing compound complete all as specified and directed

M&L for Preparing new plastered surface of wall and applying two coat of Oil bound distumper over a coat of primer of approved tint all as specified and directed by Engineer-in-Charge

M&L for Preparing new plastered surface of ceiling and applying three coats of white wash all as specified and directed by Engineer-in-Charge

M&L for Preparing old plastered surface of wall and applying one coat of Oil bound distumper of approved tint all as specified and directed by Engineer-in-Charge

M&L for Preparing old plastered surface of ceiling and applying one coat of Oil bound distumper of approved tint all as specified and directed by Engineer-in-Charge

M&L for prepation of new plastered suface of walls and applying one coat of primer and two coat of cement base paint on walls all as directed by Engr-in-Charge

M&L for prepation of old plastered suface of walls and applying one coat of cement base paint on walls all as directed by Engr-in-Charge

Complete removal of existing treatment of walls/ceiling and distempering with one coat of primer and two coat of oil bond distemper including preaparation of wall surfcace with wall care putty complete all as specified and directed

Dismentling floor hearth or wall tiling including cement mortar bedding but not backing and removing from site complete all as specified and directed

S&F coloured glazed cermic tiles size 300x200x7 mm thick on vertical surface of wall over and including 10mm thick backing coat in CM 1:4 on stone wall/concrete surface/brick wall set and jointed in neat cement slurry and pointed in white/coloured cement to match the tiles complete all as specified and directed

S&F non skid ceramic coloured tiles 7 to 8 mm thick (Square / rectangular ) area of each tile exceeding 0.06 sqm but not exceeding 0.11 sqm in floor etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match the tiles and including 15 mm thick screed bed in CM 1:6 complete all as specified and directed

Demolition of wall stone/brick masonry built in cement mortor including all quoins arches pillars etc, completed all as specified and directed.

M&L brick work with sub class 'B' bricks, straight or curved on plan exc 6m mean radius built in CM 1:6 completed all as specified and directed.

M & L for walling of random rubble, brought upto courses, well bounded, bedded and solidely hearted, built in CM 1:6 all as specified and directed.

Extra over stone walling for hammer dressing to face stones and dressing of face beds and joints as specified of RR wall brought upto courses, maximum depression n.exc 20mm in granite or trap stone complete all as specified and directed.

M & L for complete removal of existing treatment of plastered surfaces of any description and applying two coats of acrylic (antifungal) exterior grade paint over one coat of primer on wall roof completed all as specified and directed.

Dismantling wrought iron or mild steel work of any description not otherwise provided for complete all as specified and as directed.

Demolition of Stone slabs and tiles of any description or thickness in floors, aprons, cills etc. laid bedded & pointed in any mortar complete all as specified and as directed.

M & L Granite (of any type) tiles / slab 20mm thick machine cut, bedded and jointed with grey cement slurry and pointed with white cement with admixture of pigment to match the shade of granite stone including grinding and polishing complete over screed bed 20mm thick in CM 1:6 complete all as specified and directed

M & L Granite (of any type) tiles / slab 20mm thick machine cut, in skirting / dado / vertical surface laid over cement screed and jointed with grey cement slurry and pointed with white cement with admixture of pigment to match the shade of granite stone including grinding and polishing complete over backing coat 15mm thick in CM 1:3/ necessary addisive all as specified and as directed.

M & L for Chequered cement concrete designer tiles 300 X 300 X 20 to 25mm thick with grey cement and pigment (color) glossy finish set jointed and pointed in neat cement slurry in floors / path etc laid over 20mm thick screed bed in CM 1:6 complete all as specified and as directed.

Rounding to edges of stone slabs one edge / nosing such as in steps, cooking platform, and other similar situations complete all as specified and as directed.

M & L Machine pressed precast conctete interlocking paver block any shape and size with grey cement and pigment (colour) glossy finish, laid dry over 50mm thick stone dust or sand base and pompacted with using vibrator, confirming to IS 15658-2006 of 80 mm thickness M-40 Grade completed all as specified and directed.

M & L PCC 1:2:4 type B1 using (20mm graded aggregate) as in Kerbing all around of chequered tile complete all as specified and directed.

Raking out joints / pointing to random rubble or polygonal rubble uncoursed or brought up to courses built in cement or lime mortar complete all as specified and directed

M & L for raised pointing to random or polygonal rubble masonry uncoursed or brought upto course in CM (1:4) complete all as specified and directed.

Disamntling RCC post or struts any section , including taking out embedded portion and making good disturbed ground post embedded concrete including cleaning and cutting of grass,shurbs,bushes etc complete all as specified and directed

M & L cement concrete type C-2 1:3:6 (Using 40mm graded stone aggregate) in foundation filling and mass concrete complete all as specified and directed

S & F for MS angle iron Hand rails, including embeding in concrete and screwing etc. wind ties for roof including securing bolts;posts and struts in fencing including cutting tops to shape as directed, drilling holes, notching for wire, etc.; flat iron fillets (for securing wire mesh etc.) including all necessary drilling, bolting or riveting, etc., and similar work conforming to Fe-290 Gde E-165 complete all as specified and directed

Dismantling fencing wire mesh, any type all as specified and directed.

S & F galvanised security fencing 60mmx60mm with PVC coated mesh made out of 3mm dia MS wire and 1.0mm thick PVC coating through out and fixed to angle iron post including binding works complete all as specified and directed

same as Item No 64.0 above but fencing complete all as specified and directed

Supply only Round bars 5 mm dia and over upto and including 10mm dia in stirupps spacers and binders, cut to length bent to shape required, including cranking, bending spirally for hooping for columns, hooking end and binding with and including MS wire annealed not less than 0.9 mm dia confirming Fe-410-W (Gde-E-250) quality-A or Fe 290 (Gde-E-165).

same as Item No 66.0 above but except Steel Bar complete all as specified and directed

Dismantling of fencing wire of any description complete all as specified and directed

S & F in repairs Galvanized, 2 strand, steel barbed wire 2.24 mm dia., barbed with 2 mm dia., barbs at 75 mm spacing and straining and fixing to any type of standard rails straining bolts, including securing or tying at crossings with and provision of galvanized mild steel pins etc complete all as specified and directed

same as Item No 69 but Fixing Only complete all as specified and directed

S & F Mild steel screw bolts 11 to 15 mm diameter of shank screw bolts (machine made) with hexagonal screw heads at one end & screwed the other or screwed both ends, each screwed endsto be fitted with washers & one hexagonal or square nuts, length of bolt exe 5cm but n exc 10 cm long complete all as specified and directed.

S&F in repairs fancy type cromium plated bib tap 15mm bore cast copper alloy with crutch or butterfly handles, screwed down screwed for iron pipe or for brass ferrule and fixed all as directed by Engineer-in-Charge

S&F in repars fancy type chromium plated stop valve 15mm bore cast copper alloy screwed down high pressure with crutch or butterfly handle, screwed both ends for iron pipe completed all as specified and directed.

S&F in repars brass CP shower rose 125mm size completed all as specified and directed.

S&F in repairs cast iron soil waste and vent pipe (sand cast) in any length with or without ears with cement joints fixed to wall including dismantling of old U/S pipes complete all as specified and as directed using pipe of dia:- (a) 100mm bore

(b) 75mm bore

S & F in repairs 100mm dia of outler cast iron nahani trap, with grating including jointing to waste pipe fixed in cement concrete type B-1 (1:2:4) fixed in repairs complete all as specified and directed.

S&F CI branch pieces single equal or unequal ordinary or inverted (Spigot or socketed type) or paralet branches:- (a) 100mm bore

(b) 75mm bore

Taking up or down steel tubing and connections, 15mm bore complete all as specified and directed.

Taking up or down steel tubing and connections, 25mm bore complete all as specified and directed.

S & F Tubes, 'medium grad', galvanised, with all fitting; laid in trenches 15mm bore S&F Cast iron bend with door

S & F Tubes, 'medium grad', galvanised, with all fitting; laid in trenches 25mm bore complete all as specified and directed.

S&F Cast iron bend with door complete all as specified and directed. (a) 100mm bore

(b) 75mm bore

S & F 110mm dia PVC (SWR) Pipes single socketed in any length with rubber ring joints fixed to wall complete all as specified and directed.

S & F 75mm dia PVC (SWR) Pipes single socketed in any length with rubber ring joints fixed to wall complete all as specified and directed.

S & F 110mm dia PVC (SWR) Pipes single socketed in any length with rubber ring joints laid in trenches or in floor complete all as specified and directed.

S & F 75mm dia PVC (SWR) Pipes single socketed in any length with rubber ring joints laid in trenches or in floor complete all as specified and directed.

S & F for PVC (SWR) bends with access door any radius 110mm bore complete all as specified and as directed

S & F for PVC (SWR) bends any radius 75mm bore complete all as specified and as directed

S & F for PVC (SWR) branch piece, double 'Y' equal or unequal 110mm bore complete all as specified and as directed

S & F for PVC (SWR) branch piece, double 'Y' equal or unequal 75mm bore complete all as specified and as directed

S&F in repair vitreous china squatting pan "Orissa' pattern size 580x440 mm white with integrat foot rest and 'P' trap (excluding fushing cistern) but including PVC flush pipe and provision of lime concrete bedding as fixed in repairs complete all as specified and directed.

S&F in repair white vitreous China wash hand basin of size 550x400mm with CI bracket and comprising of the following :- (a) Waste fitting 32mm dia brass chromium plated with long screwed shanks and fly nut flange end bedded in red lead cement and other end fixed. (b) Pillar tap cast copper alloy with capstan head chromium plated, screwed down, high pressure with or without leltered hot or cold with long screwed shank and fly nut. (c) PVC waste pipe 32mm dia 600mm long. (d) PVC Connection 15mm size with PTMT nuts of length 450mm long.

Cleaning existing strom water drain including cleaning of grasses vegitation growth, excavating deposited mud etc at inner faces of drain and removing debries to a distance n exc 50m & depositing where directed (outside periphery area) at a level n exc 1.50m above the starting point complete all as directed.

Taking down of hood cover of rolling shutter of gear operated type area about 25sqm clear of each and greasing to all parts of rolling shutter after replacement of following unserviceable parts as required for smooth function of rolling shutter and refixing properly including bracket :-

(a) Shaft 50mm mild steel pipe.

(b) Gear box

(c) Helical spring 600mm long.

(d) Lath patty (strips) of 75mm wide & 1.20 mm thick MS.

(e) Ball bearing for 50mm dia pipe.

(f) Crancked wheel

S & F Steel rolling shutters, with out ball bearing, as specified including top cover, anchoring rod, hasp and staple and one shop coat of primer; erected in position as indicated, complete: push pull or manual type Thickness of laths in mm 1.25 complete all as specified and directed.

Fixing only Steel rolling shutters, with out ball bearing, as specified including top cover, anchoring rod, hasp and staple and one shop coat of primer; erected in position as indicated, complete: push pull or manual type, any Thickness of laths complete all as specified and directed.

Framed work such as grill, gratings, sun shed etc with ends of bars shouldered and/or riveted or welded, or forged in to spikes, framed guard bars, barred iron doors, ladders, framed balastures, walk ways, railings, frame work of water tanks and similar work conforming to Fe-410-O or Fe-310-O complited all as specified and directed.

S& F in repair angle cock copper alloy chromium plated fancy type screwed down high pressure fixed with iron pipe or ferrule directed by Engineer in charge.

S&F in repair PVC flushing cistern 10 ltr capacity high / low level white with inlet ball valve float and handle including bracket complete all as specified and directed.

S & F brass CP towel rail, 20mm dia, D type, 60 cm long between flanges fixed in repairs complete all as directed.

S & F sinks made of stainless steel 1mm thick kitchen or laboratory with plugs, washers and wastes, including bedding, waste fitting, waste pipe in cement mortar on to dwarf wall or including fixing cantilever brackets and connecting union to pipe, overall size 495mm x 420mm bowl size 410mm x 330mm x160mm fixed in repair complete all as directed.

S&F in repair vitreous china wash down water closet padestal pattern white with 'P' or 'S' trap including PVC white seat cover complete all as specified and directed.

S&F in repairsextruded powder coated aluminium sections, frame & shutter for door, window and ventilator including necessary jointing cleats, glazing clips, rubber packing aluminium snap beading screws, handles, hinges, tower bolt, starlock, etc complete and also including powder coated aluminium fittings all as specified and directed by Engineer-in-Charge. Note : Floor door spring & sheet glass shall be measured and paid seperately.

S&F 4mm thick sheet glass ordinary quality and glazing in squares execeeding 0.5 Sqm in each pane complete all as specified and directed by Engineer-in-Charge.

S&F 4mm thick sheet glass, ordinary quality and glazing in squares not exceeding 0.5 Sqm in each pane complete all as specified and directed by Engineer-in-Charge.

S&F aluminium (anodized) grill of design DG 104 pattern, made out of 10mm thick dia, rod fixed with and inclding standard aluminium frame of 'F' section of size 23.40mm x 15.30mm and 1.4mm thick all as per manufacturers instructions and complete all as specified and directed by Engineer-in-Charge.

Dismantling Asbestos cement (corrugated, semicorrugated, etc.) sheets in roof coverings complete all as specified and directed by Engineer-in-Charge.

S & F Pre- painted galvatume aluminum zinc coating GI based corrugated steel sheet 0.50mm thick of an colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screwscomplete all as specified and directed by Engineer-in-Charge.

BALAJI TRADERS

INDIA ENGINEERS AND CONTRACTORS

Everest Construction

Dinesh Enterprises

M/s S.D Construction Co

GB construction

Har Siddhi Buildcon