Nit-56(Sl-14)25-26 Date-13.01.2026

Page No.-10, Item No.-2 Dismantling all types of plain cement concrete works, stacking serviceable materials at site and removing rubbish as directed within a lead of 75m (a) upto 150 mm. thick

Page No.-01, Item No.-2(a) Earth working excavation of foundation trenches or drains in all shorts of soil (including mix soil but excluding laterite or sand stone) including removing, spreading the spols with in a lead of 75 m as directed. The items includes necessary trimming the sites of trenches leveling, dreassing. (a) Depth of Excavation not exceeding 1500 mm.

Page No.-01, Item No.-3(a) Earth work in filling in foundation trenches or plinth with good earth, in layers not exceeding 150 mm. including watering and ramming etc. layer by layer complete. (Payment to be made on the basis of measurement of finished quantity of work) (a) With earth obtained from excavation of foundation.

Page No.-02, Item No.-4(b.) Filling in foundation or plinth by silver sand in layers not exceding 150mm as directed and consoledating same by through saturation with water ramming complete, includig the post of supply of sand. (Payment to be made on basis of measurement of finished quantity of work) (B) Do- by fine sand.

Page No.-47, Item No.-3 Supplying and laying Polythene Sheet (150gm / sq.m.) over damp proof course or below flooring or roof terracing or in foundation or in foundation trenches

Page No.-24, Item No.- 4(a) Ordinary cement concrete (mix 4:2:1)) with grade stone chips (20mm down excluding shuttering and reinforcement. If any in ground floor as per relevent IS Codes (a) Pakur Variety

Page No.-15, Item No.- 7 Brick work with 1st class bricks in cement mortar (1:6) (a) In foundation and plinth

Page No.-42, Item No.- 36 Hire and labour charges for shuttering with centering and necessary staging upto 4m using approved stout props and thick hard wood planks of approved thickness with required braching for concrete slabs, beams and columns, lintels curved or straight including fitting, fixing and striking out after completion of work.(upto roof of ground floor) (f) 25 mm to 30 mm thick wooden shuttering without staging in foundation.

Page No.-189, Item No.- 1 Plastering (b) (to wall, floor, ceiling etc.) with sand and cement morter includig rounding off or chamfering corner as directed and taking out joints including noising drip course, seaffolding by staging where necessary (ground floor). (i) with 1:6 cement morter (b) 20 mm thick plaster.

Page No.-99, Item No.-01. M.S. structural works in columns, beams etc. with simple rolled structural members (e.g. joists, angle, channel sections conforming to IS: 226, IS: 808 & SP (6)- 1964 connected to one another with bracket, gussets, cleats as per design, direction of Engineer-incharge complete including cutting to requisite shape and length,fabrication with necessary bolting, metal arc welding conforming to IS: 816- 1969 & IS: 1995 using electrodes of approved make and brand conforming to IS:814- 2004, haulage, hoisting and erection all complete. The rate includes the cost of rolled steel section,consumables such as electrodes, gas and hire charge of all tools and plants and labour required for the work including all incidental chages such as electricity charges, labour insurance charges etc.I) For structural members of specified sections weighing less than 22.5 Kg./m

Page No.-222, Item No.- 11 Supplying, fitting, fixing, Chain link fencing of approved quality with R.C.C posts wooden posts or iron posts by means of galvanised "C" clips to grid of horizontal strands of galvanised high tensile spring steel wire of 12 S.W.G which have to be tensioned and fixed to the vertical posts by means of galvanised special clips, bolts and nuts etc.

Page No.-105, Item No.- 15 Supplying 1.5mm thick M.S. sheet fitted and fixed on one or both faces of M.S./ W.I. gate etc. with point welding at not more than 150mm apart complete in all respect as per design including cost of all labour and materials.

Page No.-104, Item No.- 13 (a) M.S.or W.I. Ornamental grill of approved design joints continuously welded with M.S, W.I. Flats and bars of windows, railing etc. fitted and fixed with necessary screws and lugs in ground floor. (Add extra @ 1% for each addl. floor upto 4th floor and @ 1.25% for each addl. floor above 4th floor) (i) Grill weighing above 10 Kg./sq.mtr and up to 16 Kg./sq. mtr.

Page No.-14 , Item - 19 (iii) Supply of PVC pipes & fittings Schedule 80 (medium duty) conforming to ASTMD - 1785 and threaded to match with GI Pipes as per IS : 1239 (Part - I). (A) PVC Pipes 150mm dia

Market Rate wind operated exhaust fan

Page No.-195 , Item - 07 Applying Interior grade Acrylic Primer of approved quality and brand on plastered or cencrete surface old or new surface to receive Distemper/ Acrylic emulsion paint including scraping and preparing the surface throughly, complete as per manufacturer's specification and as per direction of the EIC. (In Ground Floor) (a) One Coat ii) Solvent based interior grade Acrylic Primer

Page No.-196 , Item - 10 Acrylic Distemper to interior wall, ceiling with a coat of solvent based interior grade acrylic primer (as per manufacturer's specification) including cleaning and smoothning of surface. Two Coats

Page No.-196 , Item - 08 Applying Exterior grade Acrylic primer of approved quality and brand on plastered or cencrete surface old or new surface to receive decorative textured (matt finish) or smooth finish acrylic exterior emulsion paint including scraping and preparing the surface throughly, complete as per manufacturer's specification and as per direction of the EIC. In Ground Floor: (a) One Coat

Protective and Decorative Textured exterior high class matt finish paint of approved quality, composed of special Tharmoplastic Resin containing fine crystalline additives derive from Granite as per manufacturer's specification and as per direction of EIC to be applied over acrylic primer as required. The rate includes cost of material, labour, scaffolding and all incidental charges but excluding the cost of primer. In Ground floor Two Coat

Page No.-200, Item No.- 2 (A) Painting with best quality synthetic enamel paint of approved make and brand including smoothening surface by sand papering etc. including using of approved putty etc. on the surface, if necessary : (b) On steel or other metal surface : With super gloss (hi-gloss) - (iv) Two coats (with any shade except white)

ADD 18 % GST

ADD 1% CESS