REPAIR/MAINT OF JOINERY, PC ATT, FLOORING, PLASTERING, WALL PANELLING, FALSE CEILING, INTERNAL WIRING AND OTHER MISC WORKS IN TECH AREA AT AF STN GWALIOR

Amount

Dismantling of wall and ceiling boards (fibre, pulp, insulation etc ) or insulation boards /slabs/ blankets, any thickness, including wall paneling cover fillets or aluminium grid frame work complete all as specified and directed.

S&F Solid PVC Wall Lining (Panelling) consisting of 5mm thick any colour wood grain pre laminated PVC sheet inclusive of solvent cement and fixing at site on PVC frame as per specifications and drawing all as specified and directed.

S&F 5 mm thick PVC sheet fillet of width 35mm for wall paneling inclusive of fixing to wall to make PVC Frame as per specification and drawing all as specified and directed.

M&L 16mm thick Armstrong DUNE RH 99 Ceiling board with approved pattern(Make- Armstrong) 600x600mm size fixed over and including pre powder coated GI frame with suspension system (Grid) comprising of T section 25mmx32.5mmx1.6mm size as main runners and wall angle to placed along the wall at desired level of the False ceiling 4mm dia GI suspender of suitable size and dash fastners to be provided at desired distance centre to centre and making good the dismantling portion with removing and re-fixing false ceiling lights, fans, electric fittings/fixtures etc complete all as specified and directed.

S&F 4mm thick HPSC pre-prime non asbestos fibre cement designer building board (E-classic ) decorative finish including E-grid suspended false ceiling grid system 600x600mm with main runner 33x24x0.6mm, cross tee 25x24x0.6mm and wall angle 19x22x0.4mm ceiling suspended with 4mm dia GI wire hanger fixed with steel dash fasteners to RCC Roof or from purlin with butterfly clips hold down clips etc from soffit at approx 1.20mtr centre to centre and making good the dismantling portion with removing and refixing false ceiling lights, fans, electric fittings etc complete all as specified and directed.

S&F in repair 12mm thick SCALA RH-70 Ceiling board 600x600mm size with approved pattern (Make-Armstrong) fixed to existing GI/Aluminium Grid false ceiling including tigthing of suspended wires to desired level complete all as specified and directed.

S&F in repair 4mm thick HPSC pre-prime non asbestos fiber cement building board (E-classic or equivalent) decorative finish fixed to aluminium/GI frame work with holding down clips in false ceiling complete all as specified and directed.

Taking down chowkhat or frames with shutters (without taking off shutters from the frame) n.exc 1.5 Sqm each complete all as specified and directed.

Taking down chowkhat or frames with shutters (without taking off shutters from the frame) exc 1.5 Sqm but n.exc 4 Sqm each complete all as specified and directed.

Taking down shutters of any description exc 1 sqm but n.exc 2 sqm each complete all as specified and directed.

S&F powder coated aluminium frame for doors, windows, ventilators with one or more rebates including joining cleat for fixing etc (minimum thickness of powder coating 50 micron) complete all as specified and directed by Engr-in-Charge.

S&F powder coated aluminium door shutters, aluminium section weight 0.55 Kgs/m including necessary joining cleats, glazing clips, rubber neoprene packing, handle 02 Nos in each door, hinges, anodised aluminium snap beading, screws (Thickness of powder coating not less than 50 micron) etc complete all as specified and directed

S&F Powder coated aluminium sliding windows shutters with extruded built up standard tubular sections (using aluminium sec not less than 1.5mm thick), fixing to frame including 4mm thick tinted glass with rubber neoprene gasket, 02 Nos sliding rollers at bottom, necessary locking arrangement to each shutter using C.P./ stainless steel screws, all as specified and directed by Engr-in-Charge.

S&F powder coated Anodised aluminium window and ventilator shutters, top hung shutter and bottom fixed type without sash bar, aluminium section weighing 0.55 kg/m including necessary joining cleats, glazing clips, rubber packing, anodised aluminium snap beading, hinges, screws etc. complete all as specified etc including 4 mm thick pin head glass complete all as specified and directed.

S&F Aluminium powder coated grills size exc. 6 to 7 mm thick and aperture n.exc. 80mm incl colour matching to the existing Door/ window fixing with aluminium channel, 1mm thick with steel screw complete all as specified and directed.

S&F 4mm thick aluminium composite panel of any colour fixed to door with necessary rubber gasket and aluminium snap beadings tint match with existing complete all as specified and directed by Eng-in-Charge.

S&F 5mm thick tinted glass fixed with necessary rubber gasket and aluminium snap beadings tint match with existing complete all as specified and directed.

S&F Factory made solid PVC Moulded door shutter (with Wood free EPS), 28 to 30mm thick (stiles), with 2, 4 or 6 raised panel design with 2mm thick Moulded PVC Sheet on the front face & 2mm Plain colour PVC Sheet on back face complete all as specified and directed.

S & F solid PVC moulded door frame of size 50 mm x 47 mm made out of 5 mm thick PVC sheet (shade matching with door shutter) reinforced with MS Square tube and edges will be painted to match with printed sheet complete all as specified and directed.

S&F 2nd class hard wood, Plain, solid, straight chowkats and frames, wrought, framed rebated on the solid, rounded or chamfered, put together with glue pinned at joints complete all as specified.

S&F 35 mm thick flush shutters, solid core construction, with block board core and plywood face panels, commercial type on both sides complete all as specified and directed.

S&F 35 mm thick Glazed and skeleton shutters, open rebated and prepared to receive glass, gauze, etc. (without sash bars), edges of framing plain, chamfered or rounded. fitted with cut and mitred beads for securing glass, etc.; sizes of members of shutters as specified in SSR Part I, Section 8, clause 8.24 (a) complete all as specified and directed.

S&F framed work as in doors for hold fast complete all as specified and directed.

S&F Galvanised mild steel wire cloth, 0.56mm nominal dia of wire and average width of aperture 1.18mm and fixed with galvanized wire staples/wooden beading to wooden/steel window/vents complete all as specified and directed.

S&F in repair, Galvanised mild steel wire cloth, 0.56mm nominal dia of wire and average width of aperture 1.18mm and fixed with galvanized wire staples/wooden beading to wooden/steel window/vents complete all as specified and directed.

S&F 150 mm long powder coated Aluminium tower bolt, tint existing to match complete all as specified and directed.

S&F 150 mm long Aluminium anodised, barrel tower bolts of extruded section complete all as specified and directed.

S&F 150 mm long Aluminium handles, cast type anodised, complete all as specified and directed.

S&F in repair 150 mm long Aluminium anodised, barrel tower bolts of extruded section complete all as specified and directed.

S&F in repair 150 mm long Aluminium handles, cast type anodised, complete all as specified and directed.

S&F for 300 mm long aluminium alloy, anodised, sliding door bolt with hasp, staples(bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast aluminium alloy complete all as directed and specified

S&F in repair for 300 mm long aluminium alloy, anodised, sliding door bolt with hasp, staples(bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast aluminium alloy complete all as directed and specified

S & F 125 mm long medium weight MS Butt hinges extruded, complete all as specified and directed.

S & F 100 mm long medium weight MS Butt hinges extruded, complete all as specified and directed.

S&F in repair, door closer hydraulically regulated, designation No. 1 universal type, suitable for door shutters up to 700 mm in width and of weight not more than 35 kg complete all as specified and directed.

S&F in repair floor door stopper of aluminium alloy body and tongue, anodised, with hard drawn steel spring over all length of cover plate 150mm complete all as specified and directed.

S&F in repair double action floor spring hydraulically regulated made up of minimum 1.25 mm thick aluminium alloy sheet foundation box, main body with stainless steel cover, governing pivot made of brass, other parts made of mild steel heavy duty including necessary cutting to floor and concrete work complete all as specified and directed.

M&L preparation of new wooden surface and applying two coat of synthetic enamel paint over one coat of pink primer of any description not otherwise described over 10 cm width or girth complete all as specified and directed.

S&F Solar control film 25 micron reflective type sicked to glass panes as per instructions of manufacturers including scraping and cleaning of old film complete all as specified and directed.

S&F in repairs Stainless steel curtain rod standard size 0.75mm thick fixed to wall fixed with rawal plug and zinc screws complete all as specified and directed.

S&F in repairs Stainless steel decorative choice end SS bracket and decorative globe for fixing with curtain rods complete all as specified and directed. Note :- 01 SS bracket and 01 SS Globe measured as one set.

S&F in repairs 100 mm Brass Mortice lock, 4 Levers, vertical type suitable for aluminium doors complete all as specified and directed.

S&F in repair 150mm Brass handles, cast type, polished bright complete all as specified.

S&F 4mm thick sheet glass, ordinary quality and glazing with oil putty in square n exc 0.50 sqm in each pane including hacking out old broken glass (any thickness, size, quality or description) from wooden frames or steel, concrete or brick surrounds, glazed with putty or fixed with beads etc complete all as specified and directed .

S&F 4mm thick sheet glass, ordinary quality and glazing with oil putty in square of any size in each pane at hanger/watch tower glass at any height including hacking out old broken glass (any thickness, size, quality or description) from wooden frames or steel, concrete or brick surrounds, glazed with putty or fixed with beads etc complete all as specified and directed .

S&F UPVC luxury casement sound proof side Hung (Tilt &Turn type) windows and frame with double toughened glass glazing 65mm/C65PS3/Z-SASH, DG INS, TGH (5T+12+5T) internal plain and external tinted with cylinder of one side key, one side thumb turn and locking system including necessary builders hardware etc complete all as directed.

S&F UPVC luxury casement sound proof fixed type windows and frame with double toughened glass glazing 65mm/C65PS3/Z-SASH, DG INS, TGH (5T+12+5T) internal plain and external tinted junction of wall and frame sealed with sealent complete all as directed.

S&F UPVC sound proof door shutter with frame with double toughened glass glazing 65mm/C65PS3/ Z-SASH, DG INS, TGH (5T+12+5T) with cylinder of one side key, one side thumb turn and locking system including necessary builders hardware etc complete all as directed.

Dismantling of boarding, any description, fixed in any position with nails and fixed with screws complete all as specified.

S&F 18mm thick PVC Celuka ply of both side laminated to make kitchen cabinet shutter/drawer front shutters complete as per specifications and as directed by the Engr-in- charge.

S&F auto closing hinges 35mm size including magnetic system and openable at 110 degree for kitchen cabinets shutters.

S&F 40mm width of laps continuous (piano) hinges, mild steel, bright finish or electro galvanised complete all as specified and directed by Engr-in-Charge.

S&F mild steel Locks for cupboard/kitchen cabinet drawar, grade I, size 50mm complete all as specified and directed by Engr-in-Charge.

S&F Stainless steel handles 100mm size or kitchen cabinets shutters as per specifications and as directed by the Engr in charge.

Demolition of cement concrete ( unreinforced) including floor tiles, screed bed at ground floors and pavings n. exc 15 cm thick below or above ground level complete all as specified and directed.

Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off the premises complete all as specified and directed.

M&L for coloured glazed ceramic tiles in vertical surface 450x300x7mm thick etc set and jointed in neat cement slurry and pointed in white or coloured cement to match the tiles including 10mm thick rendering on brick work or concrete surface in cm 1:4 for back coat complete all as specified and as directed.

M & L for 25mm thick cement concrete 1:2:4 (12.5mm graded aggregate) type B-0. as in sub base complete all as specified and directed.

M & L for 75mm thick cement concrete type C-2, 1:3:6 using (40 mm graded aggregate) as in sub base complete all as specified and directed.

M&L for vitrified ceramic tiles 8 to 9 mm thick (square/rectangular) area of each tile not exceeding 0.36 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match including screed bed or bedding layer of mortar 20 mm thick for laying floor finishes in CM (1:6) all as specified and directed.

All as per item No. 60 here-in-before but but as in skirting/dado including 10mm thick cement plaster 1:4 as backing coat complete all as specified and directed.

M&L for 10 mm thick double charged vitrified coloured ceramic tiles (square/ rectangular) area of each tile exc. 0.42 Sqm but not exceeding 1.00 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match with tiles over 15mm th screed bed in CM 1:6 complete all as specified and directed.

All as per item No. 62 here-in-before but as in skirting/dado but over 10mm thick rendering in CM 1:4 as backing coat complete all as specified and directed.

M&L for 10 to 12mm thick Endura designer tiles of size not exceeding 0.16 Sqm any colour and shape with grey cement and pigment set, jointed and pointed in neat cement slurry as in floors including 15mm thick screed bed with bedding layer in CM (1:4) complete all as specified and directed. (Make :- DUROTA/JOHNSON/ORIENT/SOMANY)

Demolition stone slabs, tiles, paver of any description or thickness in floors, walls laid bedded and pointed in any mortar complete all as specified and directed.

M&L for 60mm thickness Machine pressed precast concrete interlocking paver block any shape and size of M-35 Grade confirming to IS 15658-2006 with grey cement and pigment complete all as specified and directed. (Make :- ISI Marked as approved by GE)

Sand filing under floors or in foundation incl. watering and consolidation complete all as specified and directed.

M&L for providing precast cement concrete solid building blocks for kerb stone type C-1 (1:3:6) 20mm graded aggregate 10cm thick (with plain or interlocking joints) as directed and setting in cement mortar 1:6 and all as specified and directed.

M&L for providing cement concrete (1:2:4) Type B-0 (using 12.5mm & 20mm graded stone aggregate) as in kerbs, haunching coping & flooring including necessary formwork rounded or chamfered angles all as specified and directed.

Taking down existing aluminium doors in any size and in any description with complete fittings and fixture and refixing in the same opening after repairing/servicing & adjustment of floor spring etc complete all as specified and directed. Note: Material like aluminium snap beading, rubber gasket and glass shall be paid separately

Supply only powder coated aluminium snap beading as approved by GE complete all as specified and directed.

Supply only rubber gasket for packing of glass panes as approved by GE complete all as specified and directed.

Supply only 5mm thick tinted glass as approved by GE complete all as specified and directed.

Taking down cement plaster on brick or stone walls, etc. including racking out joints, hacking for key, and scrubbing down with water etc. complete all as specified and as directed.

M&L for 15mm thick rendering on other than fair faces of brick work or concrete surfaces finished even and smooth without using extra cement in cement plaster (1:6) complete all as specified and directed.

M&L for 15mm thick rendering on fair faces of brick work or concrete surfaces finished even and smooth without using extra cement in cement plaster (1:4) complete all as specified and directed.

M&L for three coats of white wash on newly plaster surfaces of walls including preparation of surfaces complete all as specified and directed.

M&L for two coats of distemper oil emulsion over one coat of primer on newly plastered surfaces of wall including preparation of surfaces complete all as specified and directed.

M&L for preparation of newly plastered surfaces of wall and applying two coats of exterior weather proof paint over a coat of primer complete all as specified and as directed.

M & L for post construction Anti termite treatment along the external wall below concrete or masonry apron using chemical emulsion @ 2.25 litres per linear metre including drilling and plugging holes of 12mm dia etc. in apron and all as specified and directed

M & L for post construction Anti termite treatment of soil under existing floors using emulsion @ one litre per hole, 300mm apart including drilling and plugging 12mm dia holes with cement mortar 1:2 (1 cement: 2 coarse sand) to match the existing floors and all as specified and directed

Complete removal of existing treatment on wall surfaces (any number of layers) by scrapping with steel scrappers (manually/mechanically) and applying two coats of distemper oil emulsion with Roller over one coat of primer over a coat of wall putty including preparation of surfaces complete all as specified and directed.

M&L for preparation of old decorated wall surfaces and applying one coat of distemper oil emulsion with Roller on wall surfaces including filling the cracks and depression with putty to make the surface even & smooth complete all as specified and directed.

M&L for Preparation of old decorated plastered or unplastered surfaces of external walls and applying one coat of exterior weather proof Paint including filling cracks/depressions with wall putty to make the adjacent surface even and smooth complete all as specified and directed.

S&F "ACOUSTIC PERFORATED PRELAM PVC WALL PANELLING consisting of PVC perforated panels having wall thickness of 4.5/5mm PVC sheet(of density 600/Kg/Cum and the desired thickness of glasswool/rockwool pasted with perforated sheet with suitable adhesive. The strips should have in there centre a grove of 6mm width and 1mm depth for sinking the head of the screw used to fix the strips to the wall vertically at an equal interval of 10" between two PVC strips. The PVC strips shall be fixed to the wall using 65mm long MS screws through the groove in the strips by using PVC rawl plugs. The distance of two screws shall not be les than 200mm . A groove of 2mm be left at the joint of two panels for asthetic looks. The wall screws shall be placed at a distance of 15mm and shall be 25mm from the edge of the of the insulated pannel on all four side of the panel. The PVC strips of 5mm thick PVC sheet of width 75mm feathered at the edges shall be stuck using solvent cement adhesive at the places where two panels are joined, so as to cover the screw of both the pannels, using solvent cement 900heat bent strip of 5mm hick PVC sheet of width 75mmx75mm feathered at edges shall be stuck at wall joints/pillars etc

S&F 30mm thick Acoustic peforated prelam PVC false ceiling panel made of 4.5/5mm thick PVC perforated sheet of size 600mmx600mm on 25mm glasswool/rockwool pasted with perforated sheet with suitable adhesive. The panel is inserted in a frame made of GI 'T' & 'L" section of size (25mx25mm) in square type grid of 600mmx600mm the false ceiling 4mm dia GI suspender of suitable size and dash fastners to be provided @ 1.20 mtr distance complete all as directed. Notefor item No 85 & 86:- Quoted rates inclusive of removing all electric fittings and fixtures and refixing the same at its positions after finishing false celing work and replace if any damaged while doing the work

Taking down carefully aluminum /copper point wiring (light, fan, switch & power) complete including fittings such as switches, ceiling rose, pendent, by unscrewing from board ,out let box, fitting and fixture such as bulk head fitting, sketch fittings and making good the disturbed surfaces of walls floors etc all as directed.

M&L for point wiring with stranded copper conductor 1.5. Sqmm 1100 Volts grade FRLS PVC insulated and unsheathed including ISI marked PVC casing capping of required sizes as indicated including all accessories, copper conductor cable 1.5 Sqmm insulated and unsheathed PVC cables as earth wire, terminal boxes closed recessed type. PVC Plastic board all as required as specified and directed for the following :- (a) One light/ Fan point controlled by one way switch.

(b ) One 5 Amps switch socket combination on independent board. complete all as specified and directed.

(c) One 5 Amps socket on same board with other switches. complete all as specified and directed.

All as per item No-88 here in above but 2.5 Sqmm stranded copper conductor and independent board for 15 Amps switch/ socket point as directed.

S&F switch piano flush type single pole one way 5 Amps 230 V, ISI marked complete all as specified and directed.

S&F switch socket out let 3 pin 5 Amps flush type 230 Volts multipurpose, ISI marked complete all as specified and directed.

S&F switch socket out let 5 Amps and 15 Amps multipurpose( 3 Pin 15 Amps and one pin 5 Amps controlled by one switch.) ISI marked complete all as specified and directed.

S&F fan regulator Electronic Step type (min 5 steps) 2module, 100W ISI marked by removing old u/s resistance type fan regulator including necessary connection in existing laminated switch board by making necessary holes etc. complete all as specified and directed.

S&F lamp holder insulated body with back plate for battern fittings complete all as specified and directed.

M&L for sub main wiring in replacement using two single core PVC insulated, unsheathed stranded copper conductor cable of size 4 Sqmm FRLS of voltage rating 1100 Volts drawn in and including surface in PVC casing caping with standard accessories, along-with one run of PVC (green colour) insulated, unsheathed, stranded copper conductor of size 4 Sqmm as earth continuity conductor complete all as specified and directed. NOTE: Two run of single core PVC cable with one run of earth conductor and conduit shall be measured as one unit.

M&L for sub main wiring in replacement using two single core PVC insulated, unsheathed stranded copper conductor cable of size 6 Sqmm FRLS of voltage rating 1100 Volts drawn in and including surface in PVC casing caping with standard accessories, along-with one run of PVC (green colour) insulated, unsheathed, stranded copper conductor of size 6 Sqmm as earth continuity conductor complete all as specified and directed. NOTE: Two run of single core PVC cable with one run of earth conductor and conduit shall be measured as one unit.

M&L for sub main wiring in replacement using two single core PVC insulated, unsheathed stranded copper conductor cable of size 4 Sqmm, FRLS of voltage rating upto and including 1100 Volts drawn in existing conduit along-with one run of PVC (green colour) insulated, unsheathed, stranded copper conductor of size 4 Sqmm as earth continuity conductor complete all as specified and directed. Note:- Two run of single core PVC cable with one run of earth conductor shall be measured as one unit.

M&L for sub main wiring in replacement using two single core PVC insulated, unsheathed stranded copper conductor cable of size 6 Sqmm FRLS of voltage rating upto and including 1100 Volts drawn in existing conduit along-with one run of PVC (Green colour) insulated , unsheathed, stranded copper conductor of size 6 Sqmm as earth continuity conductor complete all as specified and directed. Note:- Two run of single core PVC cable with one run of earth conductor shall be measured as one unit

Supply, fixing, connecting & testing of sheet metal enclosures single pole and neutral with a two pin earth plug and socket complete with one single pole 20 amp MCB complete all as specified and directed.

Supply, fixing, connecting & testing in repair of sheet metal enclosures (IP-54 Protection) triple pole and earth with three pin earth plug and socket complete with one TPN 32 Amp MCB complete all as specified and directed.

Supply, fixing, connecting & testing in repair of sheet metal enclosures double door (IP-42 Protection), triple pole and neutral, 4 way DBs for using MCBs / MCB isolators with having aluminium bus bars suitable for 200 Amps rating complete all as specified and directed.

All as per item No.101 here-in-before but distribution board single pole and neutral, 12 way complete all as specified and directed.

All as per item No.101 here-in-before but distribution board single pole and neutral, 8 way complete all as specified and directed.

All as per item No.101 here-in-before but distribution board single pole and neutral, 4 way complete all as specified and directed.

Supply and fixing in replacement of LED flood light 70 watt 230 V AC outdoor type with thermal management in multiple optics and equipped with IP66 protection, with impact and corrosion resistant complete with driver and lamp complete all as specified and directed.

All as per item No. 105.00, but LED flood light 100 watt 230 V AC outdoor type with thermal management in multiple optics and equipped with IP66 protection, with impact and corrosion resistant complete with driver and lamp complete all as specified and directed.

All as per item No. 105.00, but LED flood light 120 watt 230 V AC outdoor type with thermal management in multiple optics and equipped with IP66 protection, with impact and corrosion resistant complete with driver and complete all as specified and directed.

Supply& Fixing in replacement of LED Batten fittings 1x20 Watt complete with round block etc, incl PVC gutties and flexible wire and connecting to ceiling rose complete all as specified and directed.

Supplying and fixing in replacement of decorative surface mounting 36 watt LED full out put luminaries which provides soft light glare free symmetrical illumination suitable for Armstrong/Grid ceiling, white powder coated sheet steel housing with paralite P5 square parabolic louver block in metallic perforated frame for low glare, aluminium reflector and accessories ,connecting the same to electric source with and including copper conductor 23/0.0076 flexible twisted twin core cable, including all accessories and fixing arrangements for fixing the 2x2 LED light fitting to false ceiling complete all as specified and directed.

S&F in replacement of 10 Watt LED bollard light one meter long with Opel acrylic diffuser and IP-65 protection including necessary PCC base work complete all as specified and directed.

Supply and fixing in replacement of post top lantern LED type 40 watt 230 watt volts AC outdoor type with decorative post top for 360 degree indirect light IP 65 protection with impact and corrosion resistant complete with driver and lamp Complete all as specified and directed.

S & F in replacement of LED light fitting 1x9W/1X10W bulk head luminaires including LED light driver holder connecting up with three core flexible copper conductor cable of suitable size complete all as specified and directed.

Supply and fixing in replacement of LED building security/street light fitting 35 Watt 230 V AC outdoor type with high pressure die cast aluminum hosing and heat resistant complete with driver, lamp bracket with impact and corrosion resistant including thermal management in multiple optics complete with IP 65/66 protection complete all as specified and directed.

J.N.R. Engineers and Builders

M/s Kishan Construction Company

M/s Manish Contractor

M/s. Ravi and brothers

M/S YOGANSH CONSTRUCTION CO.