REPAIR TO WALL PLASTER FLOORING TILLING TOILET JOINERY AND OTHER ALLIED WORKS IN APPOINTMENT HOUSES UNDER AGE BR I OF GE NORTH MEERUT CANTT

Amount

S&F glazed and skeleton shutters 30 mm thick 2nd class hardwood (HOLLOCK / CHAMP / SAL) open rebated and prepared to receive glass, gauze, etc. (without sash bars), edges of framing plain, chemfered or rounded, fitted with cut and mitred beads for securing glass, etc.; sizes of members of shutters as specified in SSR Part-I, Section 8, clause 8.24 (a); for doors and fitted to chowkats complete all as specified and directed.

S&F 35 mm thick flush shutters, conforming to IS 2202 (Part-I) - 1999 solid core construction, with block board core and plywood face panels, commercial type on both sides, complete all as specified and directed.

Taking down chowkats or frames with shutters (without taking off shutter and builders hard ware fittings from frames) not exc. 1.5 sqm each, complete all as specified and directed. Note :- Rate also incuding in this item for necessary cutting down / taking out hold fasts from the existing concrete / brick work and making good the disturbed surfaces with match existing surfaces.

Taking down chowkats or frames with shutters (without taking off shutter and builders hard ware fittings from frames) exc 1.5 sqm but not exc. 4 sqm each, complete all as specified and directed. Note :- Rate also incuding in this item for necessary cutting down / taking out hold fasts from the existing concrete / brick work and making good the disturbed surfaces with match existing surfaces.

Taking down shutters of any description exc 1 but n exc 2 sqm each, including builders hard ware fittings complete all as specified and directed.

S&F Factory made solid panel PVC door shutter 30mm thick (style) consisting of frame made out of M.S. tubes for top & bottom rails. M.S. frame shall be covered with heat moulded plain colour PVC 'C' channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail; Panelling of plain colour PVC sheet to be fitted in the M.S. frame welded/ sealed to the stiles & rails with suitable PVC sheet beading, and joined to gether with solvent cement, suppling & fixing in the frame at site as per specification & drawing all as per SSR Part-II complete all as specified and directed.

S&F Solid PVC Door frame of size 50mm x 47mm made out of 5mm plain colour PVC sheet reinforced with M.S. Square tube, suppling & fixing in opening as per specification & drawing as per SSR Part-II complete all as specified and directed.

S&F in repairs Solid PVC Wall Lining consisting of 5mm thick Plain colour PVC sheet inclusive of solvent cement and fixing at site on PVC frame with 5mm PVC fillet as per specifications and drawing as per SSR Part-II and as directed.

S&F anodised aluminium frame for doors , windows, ventilators with one or more rebates with and including weight of joining cleat for fixing etc complete all as specified and directed

S&F anodised aluminium door shutters, aluminium section weighing 0.55 kg/m with and including necessary joining aluminium cleats, aluminium glazing clips, ruber neoprene packing suitable size of aluminium, handles of size 150mm 2 Nos in each door, stainless steel hinges anodised aluminium snap beading for fixing glass panes / other filling material in panels, screws etc complete all as specified and directed. Note:- Glass panes / other filling materials in panels shall be measured and paid separately.

S&F 100mm size, 4 levers, aluminium mortice lock vertical type complete all as specified and directed.

S&F anodised aluminium widnow and ventilator shutters, side hung type without sash bars aluminium section weighing 0.55 Kg/RM with and including necessary joining cleats, glazing, clips, rubber packing, anodised aluminium snap beading for fixing glass panes screws anodised aluminium fittings such as peg stays 150mm long (1 no) hinges type B-21 100mm long (2 No), extruded anodised aluminium alloy fabricated type handles of size 100mm 1 Nos complete all as specified and directed Note :- Glass panes in panes in panels shall be measured and paid separately.

S&F 150mm long aluminium anodised barrel tower bolts of extruded section, having shoot / dia of bolt not less than 12mm complete all as specified and directed.

S&F 200mm long aluminium anodised barrel tower bolts of extruded section, having shoot / dia of bolt not less than 12mm complete all as specified and directed.

S&F 300 mm long aluminium anodised, sliding door bolts, with haps staple (bolt type) and fixing clip of sheet cast or extruded section and fixing bolts and sliding bolts not less than 16mm dia of shoot / bolt of sxtruded section or cast aluminium alloy complete all as specified and directed.

S&F Butt hinges of 100 mm size, Medium weight, cold rolled mild steel and fixed, complete all as specified and directed.

S & F Continuous (piano) hinges, mild steel, bright finish or electro galvanised,width of flap (when open ) 40 mm. complete all as specified and directed.

S&F 300mm, mild steel ordinary rat tail rod pattern springs including roller and roller plate . complete all as specified and directed.

S&F 125mm size extruded aluminium alloy handles, fabricated type., anodised complete all as specified and directed.

S&F hasp and staple, aluminium anodised and fixed with screws, Size of hasp and staple 125mm complete all as specified and directed.

S&F in repairs brass chromium plated tubular towel rail, 20mm dia, 300mm long for wash hand basin area with brackets, complete all as specified and directed. Make : Jaquar Cat Part No CAN-1101S or euqivalent in Parko / Gem

S&F in repairs Double action floor spring hydraulically regulated made up of minimum 1.25 mm thick aluminium alloy sheet foundation box, main body with stainless steel cover, governing pivot made of brass, other parts made of mild steel heavy duty complete all as specified and directed.

S&F in repairs aluminiun (die cast) body door closer hydraulically regulated, designation No. 3, universal type, suitable for door shutters of 851 to 1000 mm in width and of weight between 61 to 80 Kg and fixed. complete all as specified and directed.

S&F stainless steel wire cloth, 0.56mm nominal dia of wire and average width of aperture 1.18 mm and fixed with stainless steel wire staples including necessary beadings complete all as specified and directed.

S&F in repairs stainless steel wire cloth, 0.56mm nominal dia of wire and average width of aperture 1.18 mm and fixed with stainless steel wire staples including necessary beadings complete all as specified and directed.

S&F rolled mild steel in framed work as in doors or gates of angle or other section with gusset plates, rails, braces, etc., complete, drilled for fixing of steel sheeting or other covering. Doors, etc. to be prepared for hanging or sliding with and including either hooks and hinges or steel hanging door fitting (exclusive of steel sheeting or other covering, running rails and guides) and hanging; also fastening conforming to Fe-290 (Gde E-165) complete all as specified and directed.

Taking down old existing water proofing treatment from top of RCC/arch slab and cleaning with water and dispose off rubbish upto 200 meter complete all as specified and directed

M&L for providing PCC (1:2:4) type BO, (using 12.5mm graded crushed stone aggregates) as in roof padding finished fair and even without using extra cement complete all as specified and directed.

M&L for applying evenly a tack coat @1.20 kg/Sqm with 85/25 industrial bitumen over a coat of bitumen primer @ 0.30 liter/Sqm and laid with 3mm thick APP modified polymeric water proofing membrance with non-woven polyester rainforced and applying a tack coat of 85/25 industrial bitumen @ 1.2 kg per Sqm and finish the surface with aluminium paint at top @ 0.2 kg/Sqm as per manufacturer's instructions. Weight of membrane shall not be less than 3.6 kg/Sqm unrolled and bonded to substrate with side and end laps 75mm & 100mm as per manufacturer's instructions. complete all as specified and directed. Note :- The WPT work shall be got done through manufacturer's authorised applicator only under strict supervision of manufacturer's technical representative.

M&L in repairs 18/19mm thick prelaminated particle board, exterior grade, prelaminated one side with decorative choice laminations and other side balanceing white lamination, fixed with screws to timber frame work in cup boards, rebated or flat edged complete all as specified and directed.

Supplied and fixed 15mm thick armstrong mineral fiber false ceiling of prima dune tile (MICROLOCK EDGE) tagular ceiling board size 595 x 595 mm with and including 15mm XL tee grid suspension system of size 600 x 600mm (type -XL tee grid suspension system of size 600x600mm (type-I) made out of rolled framed hot dipped galvanized steel (zinc coating of not less than 120 gm/sqm) having rotary stitching on main runners, cross tees. Main runner shall be 0.30mm thick of section 24mm x 33mm, cross runner of 0.30mm thick of section 24mm x 33mm wall angle shall be 0.40mm thick of section 24mm x 24mm, grid shall be suspended by 2mm dia galvanized mild steel and exposed portion shall be prepainted polyester coated in off white colour complete with fixing joining all accessories etc as per manufactures instructions and directed.

M&L for coloured, cement concrete chequered tiles of size 30cm x 30cm x 25mm thick set, jointed and pointed in neat cement slurry with grey cement and pigment to match the shade / colour / matrix of tiles as in floor etc over and including 20mm th screed bed in CM (1:6) complete all as specifed and directed.

M & L for laying Non Skid ceramic tiles 7 to 8 mm thick, (square / rectangular) jointless area of each tile exc 0.11sqm but n.exc 0.18 sqm first quality coloured in floors etc, set in neat cement slurry over & including 15mm th screed bed in CM (1:6) jointed complete all as specified and directed".

M & L for light shade vitrified tiles 10mm thick (minimum), (square / rectangular) polished, area of each tiles exceeding 0.36 Sqm (including 600mmx600mm size) but not exceeding 0.42 Sqm, in flooring set and jointed in neat cement slurry and pointed in white or coloured cement to match the colour of tiles and over and including 15mm thick screed bedding in CM (1:6) complete all as specified and directed".

M & L for dark shade vitrified tiles 10mm thick (minimum), (square / rectangular) polished, area of each tiles exceeding 0.36 Sqm (including 600mmx600mm size) but not exceeding 0.42 Sqm, in skirting / dado set and jointed in neat cement slurry and pointed in white or coloured cement to match the colour of tiles and over and including 10mm thick rendering in CM (1:4) complete all as specified and directed".

M&L for Glazed ceramic tiles coloured 350mmx 250mm / 450mm x 350mm, 6 to 7 mm thick first quality on vertical surface such as skirting / dados etc set in neat cement slurry over and including 10mm thick rendering in CM (1:4) Jointed complete all as specified and and directed

M&L for 16-18 mm thick machine cut mirror polished Granite stone slab PERFECT BLACK table rubbed polished and round edges as in cooking plateform, steps and window cills and like over and including 10mm thick scread bed in CM (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade / colour / matrix of granite complete all as specified and directed.

Dismantling of floor, hearth or wall tiles / terrazzo including cement mortar bedding (but not backing),removal servicable tiles to store and rubbish off the premises, complete all as specified and directed.

M&L for rendering 15 mm thick in cement mortar 1:6 on other than fair faces of brick work or concrete vertical surfaces, finished even and smooth without using extra cement complete all as specified and directed.

M&L for rendering 5 mm thick in cement mortar 1:4 on concrete surfaces, as in ceiling finished even and smooth without using extra cement complet all as specified and directed.

Taking down cement plaster on brick or stone walls, etc. including raking out joints, hacking for key, scrubbing down with water, etc and including removal of debris and rubbish from the site complete all as specified and directed.

M&L for rendering 15mm thick cement plaster with cement mortar (1:4) on fair faces of brick work or concrete surfaces and finished even and smooth without using extra cement with using water proofing compount Note :- Water proofing compound will be measured and paid seperately.

M&L for three coats of white wash on newly plastered or unplastered surfaces of ceiling including preparation of surface complete all as specified and directed.

M&L for preparing of old decorated surfaces of walls ( plastered or un plastered ) including cornices etc and applying one coat of white lime washing complete all as specified and directed

M&L for preparing of old decorated surfaces of ceiling ( plastered or un plastered ) including cornics etc and applying one coat of white wash complete all as specified and directed

M&L for preparing the new plastered surfaces and applying two coats of Oil bound distemper over a coat of primer and over & including JK / Birla white wall care putty 2mm thick on walls to obtain / achieve even & smooth surfaces complete all as specified and direcrted.

M&L for preparing the newly plastered surfaces and applying two coats of cement base paint over a coat of primer on walls / vertical surfaces complete all as specified and direcrted.

M&L for preparation of new wooden surfaces of any description not otherwise described over 10 cm in width or girth and applying two coat of white / tinted synthetic enamel paint over a coat of pink primer complete all as specified and directed.

M&L for preparation of old painted wooden surfaces of any description not otherwise described over 10 cm in width or girth and applying one coat of white / tinted synthetic enamel paint complete all as specified and directed

M&L for preparation of new steel surfaces of any description over 10 cm in width or girth and applying two coats of synthetic enamel paint over a coat of red oxide zinc chrome primer complete all as specified and directed.

M&L for 3 mm thick sheet glass, ordinary quality and glazing with oil putty or glazing pins in square n exc 0.5 sq. m in each pane complete all as specified and directed.

M&L for 3mm thick figured glass, pin head type and glazing with oil putty in squares n exc 0.5 sq. m in each pane complete all as specified and directed.

Hacking out old broken glass (any thickness, size,quality or description) from metal frames including punching or drilling out old glazed pins / spring clip and rubbish off the premises complete all as specified and directed.

Supplied, hoisted and fixed in repairs in position rotational moulded polyethylence water storage tanks IS : 12701 - 1996 marked (cylindrical vertical with closed top) of 500 Ltrs capacity with and including 20mm dia Ball valve high pressure of PTMT with apoxy aluminium rod & high density plastic ball screwed for iron pipe and fixed. (Minimum weight 210 gms) complete all as specified and directed.

S&F in repairs 20mm bore dia Ball valve high pressure of PTMT with epoxy aluminium rod & high density plastic ball screwed for iron pipe and fixed. (Minimum weight 210 gms Make - 'Prayag' / Polytuff complete all as specified and directed.

S&F in repairs pillar taps, 15mm dia cast copper alloy, with capstan heads, chromium plated, screwed down high pressure, with or without lettered 'Hot' or 'Cold' with long screwed shanks and fly-nuts, screwed for iron pipe and fixed complete all as specified and directed.

Supplied and fixed in repairs CP WHB mixer single lever without Popup waste system with 450 mm long braided hoses and brass nut suitable to 15mm bore pipe ( Make Jaquar - cat part No QQP-7167BPM) or equivalent in PARKO / Gem complete all as specified and directed.

S&F in repairs stop valves, 15mm bore dia, cast copper alloy,CP fancy type with long shank and cup(concealed type) screwed down,high pressure with crutch or butter fly handle,screwed both ends for iron pipes or for unions and fixed in pipe complete all as specified and directed.

S&F in repairs angular valve, 15mm bore dia, cast copper alloy, CP fancy type with long shank and cup(concealed type) screwed down,high pressure with crutch or butter fly handle,screwed both ends for iron pipes or for unions and fixed in pipe complete all as specified and directed.

Supplied and fixed in repairs CP wall mixer 3-in-one system with provision for both telephone shower and over head shower complete 115 mm long bend pipe connecting legs & wall flange (with out hand & over head shower) Make Jaquar cat part No-FLR-5281N complete all as specified and directed

Supplied and fixed CP towel rack 24" size complete all as specified and directed make Jaquar cat part No ACN-1181 FS or equivelent in Parko / Gem complete all as specified and directed

Supplied and fixed 15mm dia bib cock fancy type,brass CP with wall flange fixed as in repair make-Jaquar Cat part No QQP-7037PM complete all as specified and directed.

S&F in repairs towel ring 200mm dia chromum plated fancy type conforming to the sample kept in the office of Engineer-in-Charge.

Supplied and fixed in repairs brass CP toilet paper holder conforming the sample kept in the office of Engineer-in-Charge complete all as specified and directed.

Supplied and fixed in repairs CP soap dish make-Jaquar cat part No- ACN 1131N complete all as specified and directed.

S&F in repairs PVC connections 15mm size with PTMT nuts of length 450mm complete all as specified and directed.

Supplied and fixed in repairs vitreous china WHB, white, flat back size 580x450mm including cutting for and pinning in ends of bracket or erecting stand with and including angle iron brackets, duly painted with two coats of synthetic enamel paint over one coat red oxide zinc chrome primer cast copper alloy capastan head C.P brass pillar tap fency type 01 No 15mm bore, CP brass waste coupling 32mm dia, PVC waste pipe 32mm dia and PVC connection 450mm long high pressure with PTMT nut complete all as specified & directed.

--------------BLANK----------------

Supply and fixing in repairs PVC low level flushing cistern of 10 Ltr capacity syphonic action type with inlet ball valve, float and handle including PVC brackets for mounting of cistern complete all as specified and directed.

Supplied and fixed in repairs 125 mm size brass chormium plated shower rose including fixing to steel pipe or union complete all as specified and directed

S&F in repairs sinks with drainage board made of stainless steel 1mm thick sheet for kitchen or laboratory with plugs, washers and wastes; including bedding in cement mortar to dwarf wall or including fixing cantilever brackets and connecting union to pipe overall size 915mm x 460mm bowl size 410mm x 330mm x 160mm complete all as specified and directed.

S&F in repairs plate rack of stainless steel, sheet 1mm thick for kitchen overall size 750x900x250 mm ,fixed with plugs and washers on wall complete all as specified and directed.

Supplied and fixed vitreous chinaware EWC padestal type closet with white seat & cover with flat bottom with hinging device complete all as specified and directed.

S&F in repairs glass shelf assembly 60 cm long , 5.5 mm thick glass , CP guard and fixed to wooden plug with CP screws and cup washer as specified complete all as specified and directed.

Dismantling of wall or ceiling board (fiber,pulp,insulation etc) any thickness including cover fillets and removal from the site complete all as specified and directed.

S&F in repairs 8mm dia, brass chromium plated health faucet with 1 meter long flexible hose and wall hook complete all as specified and directed Make - Jaquar, Parko, Gem or equivalent

S&F in repair corner glass shelf (with bracket) complete all as specified and directed. Make - Jaquar, Cat Part No ACN-1173 or equivalent in Parko, Gem or equivalent

S&F PVC Bath cabinet with mirror 18" x 22" x 4.25". Make : commander, Prayag or equivalent complete all as specified and directed

M&L for 25mm thick PCC 1:2:4 type B-0 (using 12.5mm graded crushed stone aggregates) as in sub base complete all as specified and directed.

M&L for rounding to edges of stone slabs two edge full round such as in steps, cooking platform and other similar situation complete all as specified and directed

S&F in repairs plastic seat cover black / white closed pattern with flat bottom and cover and mild steel chromium plated or aluminium hinging device complete all as specified and directed

S&F in repairs stainless steel fancy type tubular curtain rod 20mm dia, complete all as specified and directed.

S&F in repairs vitreous china EWC complete with inbuilt vitreous China cistern, with soft close seat cover and with twin flush fittings, brass CP hand faucet with all necessary fittings complete all as specified and directed. Make : CERA Cat Part No S1013149 or equivalent in Jaquar / Hindware

M&L for preparing of old decorated surfaces of walls (plastered or un plastered) including cornices etc and applying one coat of cement base paint including repair with wall care putty wherever required complete all as specified and directed

M&L for preparing of old decorated surfaces of walls (plastered or un plastered) including cornices etc and applying one coat of oil bound distemper including repair with wall care putty wherever required complete all as specified and directed

M&L for heavy duty, exterior grade ceramic tiles (Durastone of Somany /Endura of jhonson or equivalent as approved by GE) of size 300 x 300 x 10mm thick, set, jointed and pointed in neat cement slurry in trades, landing with white cement and pigment over and including screed bed or bedding layer of 15mm thick cement mortar (1:6) complete all as specified and directed

Taking down aluminium windows (with frame & shutters) for servicing by tightening loose fittings & aluminium sections by tightening extisting screws or providing new screws / aluminium cleats of appropriate size, cleaning, gressing / oiling (where required) easing & making functional and refixing in same opening complete all as specified and directed

Taking down aluminium ventilators (with frame & shutters) for servicing by tightening loose fittings & aluminium sections by tightening extisting screws or providing new screws / aluminium cleats of appropriate size, cleaning, gressing / oiling (where required) easing & making functional and refixing in same opening complete all as specified and directed

S&F 4mm thick black tinted glass panes fixed to aluminium doors /windows / vents with necessary rubber gaskets complete all as specified and directed

Supply only Integral water proofing compound (I.S.I marked on packing)complete all as specified and directed.

Demolition of cement concrete roof padding and paivings not exc 15cm thickness / below or above gruond level) complete all as specified and directed

vibha associates

Tridev Construction Company

M/S AMAR ELEKTRO CENTRE

Manglam Engineers and Construction Co

reshu enterprises

B.K.construction