Construction of Toilet at bunder area santhe market

Construction of Toilet and urinals at durgakeri konerikeri

Demolishing cement concrete manually/ by mechanical means including

disposal of material to the appropriate disposal area as per direction

Demolishing stone rubble masonry manually/ by mechanical means

including stacking of serviceable material and disposal of unserviceable

material to the appropriate disposal area as per direction

Earth work excavation by manual means for drains, canals, waste weir, draft,

approach channels, key trenches, foundation of Buildings & bridges and such

simillar works in all kinds of soils, as per ...

Providing and laying in position Cement Concrete for levelling course for

all works in foundation. The granite/trap/basalt crushed graded coarse

aggregates and fine aggregates as per relevant IS Cod...

Providing and Filling in foundation with granite / trap broken metal 100mm. and

down size & with approved sand including hand packing, ramming, watering,

including cost of all materials and labour w...

Providing and constructing laterite size stone masonry including cost

and conveyance of all materials curing etc complete as per specification

I.S. 3620/1979 having compressive strength not less tha...

Providing and constructing laterite size stone masonry including cost

and conveyance of all materials curing etc complete as per specification

I.S. 3620/1979 having compressive strength not less tha...

Providing and constructing laterite size stone masonry including cost

and conveyance of all materials curing etc complete as per specification

I.S. 3620/1979 having compressive strength not less tha...

Providing and constructing load bearing wall with Solid Concrete blocks

of size 400x150x200mm having block density more than 1800kg/m3

and minimum compressive strength of 4.00 N/mm2 conforming to IS...

Filling available excavated earth (excluding rock) in trenches, plinth, sides of

foundations and other similar works etc. in layers not exceeding 20cm in depth,

consolidating each deposited layer by...

Providing and laying in position Cement Concrete for all Sub structures of

building, Irrigation works, Sub structure works of bridges, Drain works &

other parallel works from 0.50m to 3.50 m height....

Supplying, fitting and placing TMT FE 550 / 550D Steel Reinforcement

including cost of all materials, machinery, labour, cleaning, straightening,

cutting, bending, hooking, laping/welding joints, tyi...

Providing and laying in position Cement Concrete for all Sub structures of

building, Irrigation works, Sub structure works of bridges, Drain works &

other parallel works from 0.50m to 3.50 m height....

Providing 20 mm cement plaster of mix :1:4 (1 cement: 4 fine sand) to

brick/stone masonry including rounding off corners wherever required

smooth rendering, providing and removing scaffolding, inclu...

Providing and fixing 1st quality ceramic glazed floor tiles conforming to

IS : 15622 (thickness to be specified by the manufacturer ) of approved

make in all colours, shades except burgundy, bottle ...

Providing & fixing factory made PVC Door frame of size 50x47mm with

a wall thickness of 5mm, made out of extruded 5mm rigid PVC foam

sheet metered cut at corners & jointed 2 No.s of 150mm long brack...

Providing & fixing 30mm thick factory made rigid foam Panelled Door

Shutters made from M.S. tube of 19 gauge thickness, size 19x19mm for

stiles and 15x15mm for top & bottom rails, covered with heat ...

Providing and fixing ISI marked oxidised M.S. handles conforming to IS:4992

with necessary screws

Finishing walls with Premium Acrylic Smooth exterior paint of required

shade : Old work (Two coats applied @ 1.43 l/ 10 m²) over existing

cement paint surface including preparing the surface after ...

Providing & fixing glass panes with putty and glazing clips in steel

doors, windows, clerestory windows, all complete with : 5.5 mm thick

glass panes including cost of materials, labour, usage charg...

Providing and fixing aluminium work for doors, windows, ventilators

and partitions with extruded built up standard tubular sections/

appropriate sections and other sections of approved make conformi...

Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes,

having thermal stability for hot & cold water supply, including all CPVC

plain & brass threaded fittings, including fixing the pipe ...

Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes,

having thermal stability for hot & cold water supply, including all CPVC

plain & brass threaded fittings, including fixing the pipe ...

Providing and fixing C.P. brass stop cock (concealed) of standard design

and of approved make conforming to IS:8931.

Providing and fixing PTMT Ball cock of approved quality, colour and make

complete with Epoxy coated aluminium rod with L.P./ H.P.H.D. plastic ball.

Providing and placing on terrace (at all floor levels) polyethylene

water storage tank, IS : 12701 marked, with cover and suitable locking

arrangement and making necessary holes for inlet, outlet an...

Providing and fixing water closet squatting pan (Indian type W.C. pan )

with 100 mm sand cast Iron P or S trap, 10 litre low level white

P.V.C. flushing cistern, including flush pipe, with manually ...

Providing and fixing wash basin with C.I. brackets, 15 mm dia CP Brass

single hole basin mixer of approved quality and make, including painting

of fittings and brackets, cutting and making good the ...

Providing and fixing Unplasticised Polyvinyl Chloride (uPVC) pipes, for

cold water supply including all uPVC plain & brass threaded fittings

This includes jointing of pipes & fittings with one step ...

Supplying heavy gauge PVC conduit pipe ……mm dia mm thick

Extra for Groove cutting in brick wall/CC floor to the suitable depth for concealing of Conduit/GI pipe and plastering, finishing upto wall surface complete.

Supplying and fixing PVC/metal conduit Deep junction box.

Supplying And Fixing Metal Fan Box with Round Hook.

Supplying and wiring adopting loop system in existing PVC Conduit /casing capping using 2x1.5Sqmm Short point upto 3Mtr from tapping point to out let via switch

Medium point above 3Mtr upto 6Mtr from tapping point to outlet

Long point above 6Mtr upto 10Mtr from tapping point to outlet

Wiring for lighting/power circuit using one of FRLS PVC insulated 1100V grade, multistrand copper wire with low conductor resistance single core in open or concealed system of wiring with specified IS...

Supplying and flush mounting powder coated / galvanized metal box suitable for mounting modular switch plates. The box should be firmly flush mounted after due groove cutting in Brick/Stone/C.C wall.1...

Supplying and fixing superior quality modular switch mounting polycarbonate plate with necessary supporting back plate with required nos. of machine screws, bolts nuts etc., complete on the existing m...

Supplying and fixing of modular switch & connected accessories on existing modular switch plate as per IS 3854 and IS 1293.

Supplying and fixing miniature circuit breakers on existing MCB distribution boards using necessary fixing materials and 'C' Type curve, indicator ON/OFF, energy cross-3 with Short circuit breaking ca...

Supplying and fixing regular MCB distribution boards on wall

Supplying of 1.1 KV LT UG cable XLPE or Heat resistant PVC insulated, PVC extruded Inner sheath armoured UG LT cable as per IS-1554 (Part-1) or IS-7098 Part-1, Armouring

Digging of trench of 0.6m deep x 0.50 mtr wide refilling the trench to the required ground level and consolidating etc., complete.(As per Civil SR KSRB I-2, P-7)

Supplying and fixing of heavy duty cable glands suitable for UG cable of 1.1 KV class (metal only)

Supplying and fixing modular PBBC/Bakelite straight or slant batten holder with wiring.

Supplying & fixing of feet - PVC Batten with integrated LED tube

Supply of round/square recess/surface mounted rolling type LED Down light with W GU 10 LED Lamp Rib

Fixing all types and all capacities of fluorescent / false ceiling

Supplying fixing and wiring earth electrode for grounding of lifts, transformers, DG sets etc. using 40mm dia 2.9mm thick 2.5 mtr long GI pipe with GI funnel with mesh

Supplying and running GI/Copper conductor for grounding and (along with other wires in conduit system of wiring) using necessary suitable size clamps, nails, guttas/spacers etc.