Shifting Work

Amount

Dismantling of 125 KVA E/A set with all accessories like Silensor, Exhaust pipe, Diesel Tank, AMF Panel including cutting the MS fabrication work, Capacitor Panels and Substation equipments like HT Panel, Transformer and Buscoupler etc. and keeping is at the location where the building authority in the same premise of the building and handover to the building authority.(Note: All necessary T&P’s have to be arranged by firm)

Dismantaling of 10TR package AC unit i/c two nos 5 TR condenser units with all its accessories including degrouting and cutting of MS fabrication work and keeping is at the location where the building authorirty in the same premise of the building and hand over to building authority. (Note: All necessary T&P’s have to be arranged by firm)

Dismantling of overhead GI sheet ducting with supply air grills & diffusers with one no. plenum & one fresh air fan duct along dampers, supports etc. complete including shifting the same from ground to ground(within 50mtr lead) & keeping at any location in the same premises & handing over to user & etc as required .(Approx. quantity 50 sqmtr) (Note: All necessary T&P’s have to be arranged by firm)

Dismantaling of existing refrigerant copper piping of folllowing sizes along with its fittings & MS Trays including cutting, and keeping is at the location where the building authority in the same premise of the building and hand over to the building authority .a. 7/8" dia pipe (Approx. Qty 300mtr) b. 5/8" dia pipe (Approx. Qty 300 mtrs) (c). 450 mm width cable tray (approx. length 60Mtr) (Note: All necessary T&P’s have to be arranged by firm)

Dismantaling of Electrical L.T.Panel of package ac unit having 2 nos 250 Amp MCCB as a incomer and 9 nos 32 Amps outgoing switchgears with all its accessories including degrouting, AV Panel, Freshair with accessories, control cales and power cables and keeping is at the location where the building authority in the same premise of the building and handover to the building authority.(Note: All necessary T&P’s have to be arranged by firm)

Dismantaling of 2.0 TR split Ac unit with all its accessories like refrigerant piping, controller, control cable, power cable and ms trays,etc. and keeping is at the location where the building authority in the same premise of the building and handover to the building authority.(Note: All necessary T&P’s have to be arranged by firm)

Dismantling of fire Alram fire Detection system i/c Fire Alarm Control Panel, Detectors, Hooters, RI and control cable including shifting the same from ground to ground(within 50mtr lead) and handing over to the building authority. .(Note: All necessary T&P’s have to be arranged by firm)

Dismantaling of Electrical L.T.Panel of package ac unit having 3 nos 250 Amp MCCB as a incomer and 12 Nos (6 nos 125 Amp & 6 nos. 63 Amp) outgoing switchgears with all its accessories including degrouting and deconnection of control cales and power cables and keeping is at the location where the building authority in the same premise of the building.and handover to the building authority.(Note: All necessary T&P’s have to be arranged by firm)

Dismantling of cable including identifying the cable from one end to another, disconnection from end termination. Removing the fixing hardware like saddles,/ clamp,spacers, etc. from existing laid cables, fitting bunch of cables lying above the cable ( to be dismanteled) by suitable means, pulling the same safety releasing dressing the held cables after dismantling coiling winding including hardly and handing ver to the departmens. Note: Cables have to be removed in entire lengths i.e Gland to gland and no cutting of the cables will be allowed. a) 4sqmm to 25 sqmm , b) 35 sqmm to 95 sqmm, c) 120 sqmm to 300 sqmm.(Note: All necessary T&P’s have to be arranged by firm)

Dismantling of electrical instalation i/c tube light fitting, Ceiling fan with down rods, Distribution boards with MCB, Exhaust Fans, Light and power plug switch boards and AC boxes including shifting the same from ground to ground (within 50 mtr lead) and handing over to the building authority. (Note: All necessary T&P’s have to be arranged by firm)

Dismantling of 4/8 way TPNDB, controller, A/c box, 2 Core x 4 sqmm cable, 3.5 x 50/35/70 sqmm cable and fixing of 4/8 way TPNDB /Conroller/ A/c Box and 3 Nos. of cable laying and connection as required. (Note: All necessary T&P’s have to be arranged by firm)

ITC of 2TR split AC units (3 Nos.) with Cu refrigerant pipe/ cable and bracket etc. as required. (Note: All necessary T&P’s have to be arranged by firm)

Shifting of 2TR split AC units (6 Nos) from Lokmanya nagar to Wagle Estate TE.Thane etc complete as required. (Note: All necessary T&P’s have to be arranged by firm)

Transportation of 1 No. x 125 KVA DG set with all accessories like Silencer, AMF Panel, Diesel Tank etc from Nahur to Kalomboli and rest of the materials for 1 x 125 KVA DG Set with all accessories like Silencer, AMF Panel, Diesel Tank etc, Packagae AC Units, Ducting, Unitised substation (Transformer, HT Panel, Bus coupler), LT Panels, Electrical Panels, DB's, MS Items etc.with help of crane and truck from Nahur to Mulund TE Building. (Note: All necessary T&P’s have to be arranged by firm)