Construction of Veterinary Hospital at Salhoi Distt. Una (HP) (SH- Providing Electrical Installation).

Amount

Wiring for light point / fan point / exhaust fan / call bell point with 1.5 Sq. mm. PVC insulated heat resistant flame retardant (HRFR) and low smoke single core (flexible) copper conductor cable in surface/recessed PVC conduit with modular switch, modular plates, suitable G.I. box and earthing the light point with 1.5 Sq.mm. HRFRLS/PVC insulated single core copper conductor cable as required. Group C.

Wiring for twin control light point with 1.5 Sq. mm. PVC insulated heat resistant flame retardant (HRFR) and low smoke single core (flexible) copper conductor cable in surface/recessed PVC conduit, with 2-way modular switch, modular plates, suitable G.I. box and earthing the light point with 1.5 Sq.mm. HRFRLS/PVC insulated single core copper conductor cable as required. Group C.

Wiring for circuit/sub-main with following size PVC insulated heat resistant flame retardant (HRFR) and low smoke single core (flexible) copper conductor cable in surface/recessed PVC conduit along with 1 No. HRFRLS/PVC insulated single core copper conductor cable of same size for earthing as required. (i) 2x1.5 Sq. mm.

2x2.5 Sq. mm.

4x4+2x4 Sqmm

2x4.0 Sq. mm.

Wiring for circuit / sub-main with 4x10 Sq. mm. PVC insulated heat resistant flame retardant (HRFR) and low smoke single core (flexible) copper conductor cable in surface/recessed PVC conduit along with 2 No.10 Sq.mm. (4x10+2x10) HRFRLS/PVC insulated single core copper conductor cable for earthing as required.

Supplying and drawing following pair of Fire Retardant, PVC insulated 0.5 sq.mm. (FR-Flexible) copper conductor, flat, unarmoured, telephone cable in existing surface / recessed, steel / PVC conduit as required. 2 Pair

Supplying and fixing of following sizes of PVC conduit along with the accessories in surface / recess including cutting the wall and making good the same in case of recessed conduit as required:- 20 mm. dia

Supplying & fixing of G.I. modular bo xes of following sizes along with modular base and cover plate for modular switches in recess as required:- 2 modules (78mmx78mmx50mm)

6 modules(205mmx78mmx50mm)

Supplying and fixing following rating Modular switch /socket in the existing switch box / cover plate including connections etc. as required. (i) S.P. 5/ 6 Amps one way Modular switch.

5 pin, 5/ 6 Amps Modular socket outlet.

Telephone socket outlet, Modular.

Supplying and fixing stepped type Modular fan regulator on the existing modular box including making connections etc. as required.

Supplying and fixing G.I. Modular box of (140mmx78mmx50mm) size with modular plate and cover in recess including providing and fixing 5 pin 5/6 amps modular socket outlet and 5/6 amps, modular switch, connections etc. as required.

Supplying and fixing G.I. Modular box with modular plate and cover in recess including providing and fixing 5Pin6 amp modular socket and 5/6 amp modular switch 6 pin 15/16 amps modular socket outlet and 15/16 amps, modular switch, connections etc. as required.

supplying and fixing Modular computer board on surface/recess with suitable size inner and outer sheet cover in the front including providing and fixing 6 pin 15/16 amps socket outlet and 15/16 amps, modular type switch,3 Nos. 5/6 Amp Switch and 3 Nos. 5 pin 5/6 Amp Socket complete connections, painting etc. as required.

Supplying and fixing bakelite batten/angle holder including connections etc. as required:-

Supplying and fixing call bell / buzzer, suitable for D.C./A.C. single phase,230 volts complete as required:-

Supplying and fixing Ding-Dong / Electronic musical bell, suitable for D.C./A.C. single phase,230 volts complete as required.

Supplying and erection of 6 amps. to 32 amps. rating, 10 KA breaking capacity, 240 volts, 'C' curves, miniature circuit breaker of following poles in the existing MCB DB complete with connections etc. as required:- Single pole. Cat-A.

Supplying and fixing following rating, double pole, 240 volts, isolator in the existing MCB DB complete with connections, testing and commissioning etc. as required. (i) 63 Amps. Cat-A.

Supplying and fixing following rating, four pole, 415 volts, Isolator in the existing MCB DB complete with connections, testing and commissioning etc. as required. (i) 63 Amps. Cat-A.

Supplying and fixing following rating, four pole (three phase & neutral) 415 volts, residual current circuit breaker (RCCB), having a sensitivity current up to 300 miliampers in the existing MCB DB complete with connections, testing and commissioning etc. as required. (i) 63 Amps. Cat-A.

Supplying and fixing of following way triple pole and neutral, sheet steel MCB distribution board, 415 volts, on surface / recess, with provision to mount 8 module incomer, 2 module sub-incomer and SP MCBs as outgoing, complete with tinned copper bus- bar, wire-set, neutral link, earth bar, din-bar, detachable gland plate, cable, identification labels interconnections, phosphatized and powder painted, including earthing etc. as required:- (i) Double door-2+8 way (8+6+24) horizontal type

Earthing with G.I earth pipe 4.5 mtr. long and 40mm dia, including accessories and providing masonry enclosure with cover plate having locking arrangement and watering pipe etc. ( but with charcoal or coke and salt ) complete as required.

Providing and fixing 6 SWG (4 mm dia.) G.I. wire on surface or in recess for loop earthing as required.

Providing and installation of stationary storage type Electric water heater (Geyser) of various sizes by means of Expansion-bolts with nuts and washers, including embedding of expansion-bolts in the wall, providing and fixing of Non-return valve, Dead weight safety valve, 2 No C.P. connection rods 18" long, making good the damages, electrical connections, safety valve connections, testing and commissioning etc. as required:- 10 Liter capacity water heater (Cat-A)

Providing and installation of exhaust fan of following sizes in the existing opening, including making the hole to suit the size of the above fan, making good the damages, connections, testing and commissioning etc. as required:- (i) Exhaust Fan, Light duty, 300 mm sweep

(ii) Exhaust Fan, Heavy duty, 300 mm sweep in/c fan shutter if required

Providing, Installation, testing and commissioning of ceiling fan with regulator, including wiring the down rods of standard length (up to required length] with 16/0.20 mm twin twisted flexible, cotton braided, copper cable, including providing and fixing phenolic laminated sheet cover on the fan box and earthing etc. as required:- (i) Ceiling Fan 1200 mm sweep, Category-A

(ii) Ceiling Fan 1400 mm sweep, Category-A

Supplying and fixing of fancy wall bracket Led/LED Batten of all sizes and shapes, complete with all accessories but excluding CFL lamp including making connections, testing etc. as required. (i) Wall Light fixture Polycarbonate body suitable for 9 watt Retro fitt Led Lamp B22 base

(ii) Mirror light/ Led Batten 10 watt Al housing

Supplying and fixing of LED bulk head fitting of all sizes and shapes, containing one No. lamp holder (s), complete with all accessoriesand LED lamp including making connections, testing etc. as required. (i) Bulk head fitting, CFL type (Category-A)

Providing & fixing surface/ recess mounted 12/ 15W LED fitting of Syska/Havells/Philips/ Bajaj make as required complete in all respect.as approved by Engineer -in -Charge. (i) 9 Watt

Supplying & fixing surface mounting fitting 1'x 1' LED luminaire panel of Bajaj/Havells/Philips/Syska20 / 24WH

Providing & fixing Skyluks efficient LED panel recessed/surface 4x1 /2x2FTof Bajaj /Wipro complete in all respect fitting in ceiling as approved & directed by engineer in charge.

Providing & fixing 30 watt LED street light fitting ln white colour with pressure die- cast housing with toughened glass and individual LEDs with secondary optics and IP 66 protection. As per CAT no. BRTFG 30W LED/W/ White ) complete in all respect as approved and directed by engineer in charge of Bajaj/ Philips/ Havells make.in/c cost of G.I.Plpe Bracket.

Supplying and fixing of reputed make Light Emitting Diode of following rating as required.7-15 Watt. (phillips/ syska/or equivlent make

RAHUL GAUTAM

M/s On Time Power Service

Ganesh Kumar Bassi

Pawan Kumar

Devinder Kumar

Malkyat Singh