REPAIR / REPLACEMENT OF TAXI TRACK LIGHTS, HIGH MAST LIGHTS, HANGER DOORS IN TECH AREA AND CERTAIN CIVIL WORKS AT E/M INSTALLATIONS AND CONNECTED ITEMS IN TECH AREA AT PALAM UNDER GE (AF) PALAM DELHI CANTT - 10

Amount

Opening medium bay hangar roof light fittings any capacity and removing unserviceable items like ballast, igniter, lamp, control gear / Driver etc and keeping in safe custody for taking credit complete all as specified and as directed. Note:- (a) Material required to make the light fittings serviceable shall be measured and paid seperately under relelvent items. (b) Hydraulic boom lifter vehicle for repairing hanger roof lights fixed at a height up to 20 Mtr above from ground level complete with the following arrangement complete all as specified and as directed by Engr-in-Charge. (i) Hydraulic boom lifter shall have suitable covered tiltable plaltform at the end for carying to person for woking (ii) The haydraulic boom lifter shall be wheeled vehicle and adequate counter weight shall be provided for balanciang the vehicle while lifting the platform

Taking down unserviceable light fittings from the tarmac/ dispersal / taxi track by removing glaas cover and checking the unserviceable parts like copper ballast, lamps, ignitor, capacitors & control gear box, etc and refixing the fitting back to its original position after carried out all repairs to make the fitting serviceable complete all as specified and as directed.

Taking down unserviceable light fittings from the high mast by lowering the high mast by wintch & motor including removing glass cover and checking the unserviceable parts like copper ballast, lamps, ignitor, capacitors & control gear box, etc and refixing the fitting back to its original position after carried out all repairs to make the fitting serviceable complete all as specified and as directed.

S&F in replacement of open construction copper ballast suitable for 400 watt MH light fitting complete all as specified and as directed.

S&F in replacement of open construction copper ballast suitable for 250 watt MH Light fitting complete all as specified and as directed.

S&F in replacement of Lamp Metal Halide tubular single ended 400w complete all as specified and as directed.

S&F in replacement Lamp Metal Halide tubular single ended 250w complete all as specified and as directed.

S&F in replacement of super imposed 3 lead ignitor suitable for 250 to 400w MH fittings complete all as specified and as directed.

S&F in replacement of electronic driver suitable for LED flood light upto 150 watt complete all as specified and as directed.

S&F in replacement of electronic driver suitable for LED flood light 200 to 250 watt complete all as specified and as directed.

S&F in replacement of electronic driver suitable for LED flood light 300 to 400 watt complete all as specified and as directed.

S&F in replacement of new generation high efficient LED Bay light made of die cast auminium housing with 10KV SPD, lens & toughened glass IP66 protection low weight for easy enstalltion 90 degree wide distribution complete with driver compatment, driver and all accessories of capacity 200 Watt complete all as specified and as directed. Note:- All installation including SS chain for hanging lights if required at site shall be arranged by the contractor without any extra cost.

S&F in replacement of new generation high efficient LED Bay light made of die cast auminium housing with 10KV SPD, lens & toughened glass IP66 protection low weight for easy enstalltion 90 degree wide distribution complete with driver compatment , driver and all accessories of capacity 200 Watt complete all as specified and as directed.Note:- All installation including SS chain for hanging lights if required at site shall be arranged by the contractor without any extra cost .

S&F in replacement highly efficient LED flood lights 400 watt warm white with lens made of pressure die cast aluminium housing, extruded heat shrink and enclosed with toughened glass (IP 66 Protection) internally prewired including electronic driver and connecting up with three core flexible copper conductor 1.5sqmm cable complete all as specified and as directed.

S&F in replacement highly efficient LED flood lights with thermal management and equipped with IP66 protection of 300 watt complete with driver, control box etc and connecting up with suitable size copper wire complete all as specified and as directed.

S&F in replacement highly efficient LED flood lights 250 watt warm white with lens made of pressure die cast aluminium housing, extruded heat shrink and enclosed with toughened glass (IP 66 Protection) internally prewired including electronic driver and connecting up with three core flexible copper conductor 1.5sqmm cable complete all as specified and as directed.

S&F LED flood lights with high pressure die cast housing with lense (IP 66 Protection) 3rd generation with ultra slik light weight and with secondary optics made of pressure die cast housing including all accessories prewired of capacity 200 Watt complete all as specified and as directed.

S&F LED flood lights with high pressure die cast housing with lense (IP 66 Protection) 3rd generation with ultra slik light weight and with secondary optics made of pressure die cast housing including all accessories prewired of capacity 180 Watt complete all as specified and as directed.

S&F LED flood lights with high pressure die cast housing with lense (IP 66 Protection) 3rd generation with ultra slik light weight and with secondary optics made of pressure die cast housing including all accessories prewired of capacity 150 Watt complete all as specified and as directed.

S&F LED flood lights with high pressure die cast housing with lense (IP 66 Protection) 3rd generation with ultra slik light weight and with secondary optics made of pressure die cast housing including all accessories prewired of capacity 120 Watt complete all as specified and as directed.

S&F LED flood lights with high pressure die cast housing with lense (IP 66 Protection) 3rd generation with ultra slik light weight and with secondary optics made of pressure die cast housing including all accessories prewired of capacity 100 Watt complete all as specified and as directed.

S&F Traffic light LED type red/green, 24 hrs operation 300 mm round light source, visibility> 500 mtrs, operating voltage 230 Volt AC complete with poly carbonate enclosure and clear diffuser complete all as specified and as directed.

S&F in replacement LED Aviation Obstruction Light with yellow painted die cast aluminium alloy housing, with polycarbonate enclosure complete all as specified and as directed.

S&F in replacement of electric motor 2 KW capacity 415 volt 50 Hz 900 RPM with gear 100 mm dia and chain mechanism suitable to existing system to drive the high mast up and down complete all as specified and as directed.

Supply and fixing in replacement of control panel of Hanger door motor factory made comprising relay, contactor, ON - OFF push button, forword and reverse lever complete to operate Hanger door motor including suitable capacity of power contractor 3 pole, auxillary relay, multi functional meter and ON/OFF indicator lamp to operate the 3 HP motor complete as following all as specified and as directed:- (a) Power contactor, 3 pole, 20 Amps -02 Nos (Make-: L&T, Schneider, Legrand) (b) 8/11 pin auxillary relay - 02 Nos (Make:- L&T, Schneider, Legrand) (c) Under voltage relay, 230 volts - 01 Nos ( Make:- L&T, Schneider, Legrand) (d) Multi functional meter - 01 Nos ( Make:- L&T, Schneider, Legrand) ( e) ON/OFF indicator lamp - 01 set.

Repair to unserviceable hangar door motor from hanger doors by removing the motor and gear assembly and refixing the same after repair and testing for smooth functining of hanger door including greasing & cleaning the guide rail complete all as specified and as directed. Note:- Winding of motor and spare shall be measured and paid seperaltely.

M&L for gear assembly comprising of sets of gear to transfered the motion 90 degree fixed in mild steel housing as per existing hanger door motor and capable to bear the load of hanger door 20 mtr height including making suitable arrangement with chain and gear machanism to move the hanger door wheel at speed 0.5 Mtr to 1.0 Mtr per second including testing complete all as specified and as directed.

M&L for winding of induction motor 2 KW capacity with super ennamelled copper wire of suitable gauge by opening stator and rotor assembly and reassembling the same after repair complete all as specified and as directed.

M&L for ball bering of motor/ gear assembly complete all as specified and as directed.

M&L in replacement of hanger door wheel 300 mm dia with gear arragement for chain mechanism to move the door forward and reverse with shaft and roller bearing tightly sealed and equipped with high pressure and capable to bear the load of hanger door 20 Mtr height complete all as specified and as directed.

M&L for submain wiring with two single core 6.0 sq mm PVC insulated FRLS multistranded but sheathed copper conductor cable 1100 Volts grade IS-694 marked drawing through and including steel conduit, and accessories such as bend, elbow & socket with and including one single core 6.0 Sqmm FRLS multistranded copper conductor cable as continuous earth wire complete complete all as specified and as directed.

Description all as per ser item No. 31.00 but two single core 4.0 sq mm and one single core 4.0 Sqmm complete all as specified and as directed. Note for ser item No. 31.00 & 32.00:- (a) Two core main wire, one core earth wire and steel conduit shall be measured and paid as one run. (b) The cost of cutting chases and make good the disturbed surface shall be deemed to be included in unit rate.

S&F in replacement of RCCB 40 Amps 240 volt, AC 100mA complete all as specified and as directed.

S & F in replacement of distribution board two way with RCCB 63 Amps 240 volt, AC 100mA complete all as specified and as directed.

S&F control cable PVC insulated copper conductor 2.5 sqmm 3 core complete all as specified and as directed.

S & F control cable PVC insulated copper conductor 4.0 sqmm 3 core complete all as specified and as directed.

Excavation in trenches in soft/loose soil not exceeding 1.50 Mtrs wide and not exc. 1.5 Mtr deep and getting out for taking out/laying cable, poles & stay etc complete all as specified and as directed.

Returning, filling in including spreading, leveling, watering and well ramming in layers not exc 25 cm thick after the cable have been laid and tested complete all as specified and as directed.

Removal of excavated surplus soil to a distance not exc. 50 Mtrs and depositing where directed at a level not exc 1.5 Mtr above the starting point complete all as specified and as directed.

M&L for sand cushioning to under ground cable provided with layer of sand (8cm deep before laying the cable and 15 cm deep after laying the cable ie total 23 cm) complete all as specified and as directed.

M&L for brick laid in trenches for cable protection of burnt clay sub class ‘B’ complete laid dry flat complete all as specified and as directed.

Taking out old unserviceable LT under ground cable any type from trenches, pipes & poles complete all as specified and as directed.

Supply and fixing cable PVC insulated under ground 1100 volt grade with stranded aluminium conductor of 25 Sq mm 4 core sizes in trenches /passing through pipes/ on poles etc complele all as specified and as directed.

Supply and fixing cable PVC insulated under ground 1100 volt grade with stranded aluminium conductor of 50 Sq mm 3.5 core sizes in trenches /passing through pipes/ on poles etc complele all as specified and as directed.

Supply and fixing cable PVC insulated under ground 1100 volt grade with stranded aluminium conductor of 95 Sq mm 3.5 core sizes in trenches /passing through pipes/ on poles etc complele all as specified and as directed. Notes for ser item No. 34.00 to 36.00:- (a) Excavation, earth work and protection of cable shall be measured and paid seperately under respective items of BOQ.

Taking down carefully unserviceable copper/aluminium point wiring (light, fan, socket or power) complete including fixture and fittings such as switches, ceiling rose, lamp holder, regulators, sockets, light fittings, wooden terminal boxes, plastic laminated sheet cover, including taking down of DB’s, meter board any type complete all as specified and as directed.

M & L for Point wiring with single core PVC insulated but unsheathed 1.5 Sqmm FRLSH multistranded copper conductor cable 1100 volts grade IS-694 marked drawn in and including rigid non metallic PVC conduit medium grade not less than 20 mm dia ISI marked with all conduit fittings and fixing accessories including modular metal flush box with modular plate for mounting switches, sockets, fan regulators, etc and earth wire single core PVC insulated but unsheathed multistranded copper conductor cable 1100 volts grade IS-694 marked 1.5 Sqmm FRLSH cable as continuous earth wire connecting to common earth dolly in concealed wiring system including making good the disturbed surface of wall complete all as specified and as directed for the following :- (a) One light point controlled by one switch one way

(b) One socket outlet 5 Amp controlled by one switch on independent board

(c) One 3 pin 5 Amps socket out let point on the same board controlled by one switch

Description all as per Srl item No 55.00 here-in-before but for one power point 6 pin 15 Amps socket out let with 2.5 Sq mm strandeded copper conductor cable PVC insulated including earth wire 2.5 Sq mm copper conductor cable connected to earth dolly complete all as specified and as directed.

S&F modular switch 1 way 6 Amps one module complete all as specified and as directed.

S&F modular socket 6 Amps 2/3 Pin combined 02 module complete all as specified and as directed.e.

S&F modular switch one way 16 Amps, one module complete all as specified and as directed.

S&F socket modular type 6 amp/16 amps, 2/3 pin combined 02 Module complete all as specified and as directed.

S&F ceiling rose, surface type, 65mm x 50mm, 2 to 3 terminal complete all as specified and as directed.

S&F sheet metal enclosure for distribution board SPN (when MCBs to be used ) 12 way 240 volts double door, 200 Amps rated bus bars and with neutral, earthing bar and din rail complete all as specified and as directed.

S&F sheet metal enclosure for distribution board SPN (when MCBs to be used ) 8 way 240 volts double door, 200 Amps rated bus bars and with neutral, earthing bar and din rail complete all as specified and as directed.

S&F sheet metal enclosure for distribution board TPN (when MCBs to be used ) 4 ways 240 volts double door, 200 Amps rated bus bars and with neutral, earthing bar and din rail complete all as specified and as directed.

Supply and fixing in replacement vertical type load line distribution board, double door, 8 way, IP 54 IK09 AC, 3 Phase, 415 volts ,TPN, bus bar 200 Amps rating and earth bus & din rail suitable for accomodating MCCB 125 Amp as incomer complete all as specified and as directed.

S&F MCCB, 3 pole 125 Amp, 16kA, 415Volts complete all as specified and as directed.

S&F MCCB, 3 pole 100 Amp, 16kA, 415Volts complete all as specified and as directed.

S&F MCB, 4 pole, 63 Amp,10 kA complete all as specified and as directed.

S&F MCB, TP, 63 Amp,10kA complete all as specified and as directed.

S&F MCB, SPN 40 Amp ,10kA complete all as specified and as directed.

S&F MCB, SP 40 Amp ,10kA complete all as specified and as directed.

S&F MCB, SP 6 -32 Amp ,10kA complete all as specified and as directed.

S&F single pole and neutral enclosure with a two pin and earth plug and socket complete with one single pole MCB single pole 20 Amps complete all as specified and as directed.

S&F indoor decorative LED battens- integrated type 20 watt 4 feet white fixture with extruded aluminium body, suitable for LED tube 20 watt , bipin holder, connector block, LED rod 20 watt etc complete with all accessories internally are wired and including connecting up with twin core copper conductor cable complete all as specified and as directed.

S&F LED luminaire 600 mm x 600 mm, 35/36 watt, 220 V AC recessed type with high efficiency PMMA diffuser soft glare free light complete with driver, holders & LED lamp suitable for roof ceiling including connecting up with driver three core flexible copper conductor cases of suitable size complete all as specified and as directed.

Supply & fixing in replacement of control panel outdoor IP-65 protection weather proof made of 14 SWG MS Sheet with Hinged door operatable on both side with heavy duty locking system and Knock out hole at bottom with cable galnds for incoming and outgoing cable including 40 Amps poer contactor TP-01 No, 63 Amps MCCB 16kA with adjustable thermal and fixed maganetic relay - 01 No with electronic timer complete all as specified and as directed.

Supply and fixing in replacement of outdoor type cubical feeder pillar box (1000x800x500)mm size suitable for 3 phase, 4 wire, 415Volt, factory fabricated with CRCA sheet not less than 3mm thick having modern fabrication process powder coating in approved shade provided with suitable gasket to make it dust and vermin proof IP 65 class protection and the panel should have 800 Amps aluminium Bus bar three phase & neutral mounted on insulators mounted on angle iron frame 40mmx40mmx6mm (angles duly painted with two coats of synthetic enamel paint over a coat of zinc chrome primer) and front opening type, with aprons for cable entry, with double door shutter and locking arrangement with MCCB 400 Amp 4 pole 36 kA as incoming including terminating the existing incoming and outgoing cables etc including foundation with PCC (1:2:4) type B-1 (using 20mm graded stone aggregates) complete all as specified and as directed.

M&L for Junction box outdoor in replacement type, 3 phase 415 Volts of size 350x250x150 mm made out of hot press moulded SMC front openable hinged type including 4 Nos. Al bus bars mounted on insulators heavy duty of rating 32 Amps with necessary fixing arrangements to pole with MS calmps, nuts, bolts etc of size (25 x 4) mm duly painted with two coats of synthetic enamel paint over a coat of red oxide primer complete all as specified and as directed.

Supply and fixing LED light fitting 2x16 Watt flame proof, CMRI certified recommended for gas / vapor group of group IIA & IIIB, Zone 1 & 2 and IP 65 protection with die cast aluminium housing with heat resistant toughened glass with LED tube light fixtures driver, holders, connector etc. complete with all accessories prewired and including connecting up with three core flexible copper conductor cable with suitable size complete all as specified and as directed.

Supply and fixing of switch flame proof rotary type with termination box in LM6, 16A, single pole 250V complete all as specified and as directed

M&L for submain wiring with two single core 10.0 sq mm PVC insulated FRLSH multistranded but sheathed copper conductor cable 1100 Volts grade IS-694 marked drawing through and including rigid non mettalic PVC conduit, medium grade ISI marked with all conduit fittings such as bend, elbow & socket with and including one single core 10.0 Sqmm FRLSH multistranded copper conductor cable as continuous earth wire complete complete all as specified and as directed. Note : (i) 2 core main wire, 01 core earth wire and PVC conduit shall be measured and paid as one run. (ii) The cost of cutting chases and making good the disturbed surface shall be deemed to be included in unit rate.

S&F triple pole and earth enclosure with a three pin and earth plug with socket complete woth one triple pole MCB 63 Amp TPN complete all as specified and as directed.

H.B. Traders (BID ID -3368906)

M/S R K JATOLIA ENTERPRISES (BID ID -3368375)

Commercial Traders (BID ID -3368929)

M/S Anand Enterprises (BID ID -3368916)