Erection of pole along with making of bus bar structure, lighting arrestor, Chemical earthpits in P.O. office under Dhori Khas UG minesin Dhori Area

Amount

Erection of metallic pole of following length in cement concrete 1:3:6 (1 cement : 3 coarse sand : 6 graded stone aggregate 40 mm nominal size) foundation including excavation and refilling etc. as required.Above 10.00 metre and upto 12.00 metre

Erection of metallic pole of following length in cement concrete 1:3:6 (1 cement : 3 coarse sand : 6 graded stone aggregate 40 mm nominal size) foundation including excavation and refilling etc. as required.Above 6.5 metre and upto 8.0 metre

Dismantling of cable & Stacking at a place as per instruction of EIC 90 sqm cable

Dismantling of cable & Stacking at a place as per instruction of EIC 70 sqm cable

Dismantling of cable & Stacking at a place as per instruction of EIC 120 sqm cable

Dismantling of over head lines comprising of copper/ aluminium over headconductor, G.I. wire, cross arms, insulators etc. as required

Departmental Supply of channel Angle etc iron materials to be used in Bus bar structure (Departmental Supply) (Do not fill rate for this item or fill '0')

Cutting & wielding of iron materials

Supplying of clamps

Supply and fixing of horizontal type heavy duty GOS, 11 KV 800A double break

Erection of angle iron/ channel iron cross arm on wood/ RCC/ PCC/ steel tubular/ rail pole etc. as required.

Erection of AAA conductor of 7/3.35 mm to 7/4.00 diameter and above including binding etc. as required.

Dismantling of pole/ street light standard/ strut embedded in cement concrete foundation etc. as required

Supplying and laying 25 mm X 5 mm G.I strip at 0.50 metre below ground as strip earth electrode, including connection/ terminating with G.I. nut, bolt, spring, washer etc. as required. (Jointing shall be done by overlapping and with 2 sets of G.I. nut bolt & spring washer spaced at 50mm)used for horizontal types

Providing and fixing 25 mm X 5 mm G.I. strip on surface or in recess for connections etc. as required. Used Vertical types

Supplying and erection of three piece nonlinear resistor type lightning arrestor suitable for 3 wire, 11 KV overhead lines with rated voltage 9 KV (rms) with a nominal discharge current rating of 5 KA and complete with galvanised clamping arrangement, G.I. bolts, nuts, washers etc. as required

Earthing with copper earth plate 600 mm X 600 mm X 3 mm thick including accessories, and providing masonry enclosure with cover plate having locking arrangement and watering pipe of 2.7 metre long etc. with charcoal/ coke and salt as required.

Providing of nuts and bolts

Providing of different size washers

Providing of T connector

Dismantling, maintaining & refitting of horngap

Providing of Bus bar alluminium dia 40.8 mm & outer 48.30 inch lengh 3.6 m

Fixing of Bus bar as per Inst. of EIC

Providing of Bus bar connector

Supplying & fixing of cable pad

Fixing of bus bar support post insulater with nuts & bolts

Providing & fixing of aluminium jointer

Supplying and erection of a set of cross bracing FRLSame work for 11 KV over head line double pole structure having four members fabricated out of 50 mm X 50 mm X 6 mm angle iron to form a rectangle of minimum size 1400 mm width X 2500 mm height, complete with 50 mm X 6mm M.S. flat iron clamps, bolts and nuts including drilling holes for insulator pins, bolts and nuts etc (as per drawing) and painting with primer and finish paint as required

Providing & fixing of copper lugs 10mm

Supplying and erection of 11 KV disc insulator for 11 KV over head lines with galvanised insulator fittings, ball and socket type and complete with galvanised strain clamps, bolts, nuts, washers etc. as required+Erection of disc/ pin insulator for 11 KV over head lines as required.

Supplying and erection of 11 KV pin insulator complete with large steel head G.I. pin, nuts, washers etc. as required.+Erection of disc/ pin insulator for 11 KV over head lines as required.

Applying priming coat :With ready mixed red oxide zinc chromate primer of approved brand and manufacture on steel galvanised iron/ steel works +Painting with aluminium paint of approved brand and manufacture to give an even shade Two or more coats on new work.

Painting with synthetic enamel paint of approved brand and manufacture of required colour to give an even shade :Two or more coats on new work over an under coat of suitable shade with ordinary paint of approved brand and manufacture for jalli Painting

Dismantling of Gang operating switch different type

Machanised drills for making of holes over iron channel/angle as per required for structure of bus bar

Total impact of GST for the purpose of CTC

M/s engineer associates

Aadi Enterprises