PERIODICAL SERVICES, REPAIR TO FIN FACIA CHAJJA AND ALLIED B R REPAIR WORKS INCLUDING CAMOUFLAGE PAINTING AT CERTAIN AREA AT AF STN PANAGARH UNDER GE (AF) PANAGARH

M&L for washing rubbing down and stopping of old cement base painted wall surfaces including brooming down with steel wire brushing, scrapping down smoke soot, moulds, moss and efforescent salts and treating oil and greasy spots and applying one coat of cement based paint on wall surfaces complete all as specified and directed.

M&L for washing rubbing down and stopping of old acrylic exterior paint wall surfaces including brooming down with steel wire brushing, scrapping down smoke soot, moulds, moss and efforescent salts and treating oil and greasy spots and applying one coat of Acrylic Exterior Emulsion paint on wall surfaces complete all as specified and directed.

M&L for preparation of new wall surfaces and applying two or more coats of 100% premium quality acrylic emulsion paint (Apex ultima) having VOC less than 50gm/ Ltr and UV resistence as per IS 15489:2005, alkali and fungal resistance, dirt resistance exterior paint of required shade (company depot tinted) with slilicon additive @ 1.43 ltr/10 Sqm over and including a coat of exterior primer applied @ 0.902 ltr/ 10 Sqm with roller finish complete all as specified and directed by GE.

M&L for preparation of old painted steel surfaces of any description exc 10 cm in width or girth and applying one coat of synthetic enamel paint (1st quality) complete all as specified and directed.

M&L for writing letters or figures (block, Roman, italic or indian) n exc 30 cm height with synthetic enamel paint without brush marks, if necessary re-painted untill the desired result is obtain complete all as specified and directed.

M & L for taking down/ demolition of cement plaster/ concrete as required thickness, after cleaning surface applying polymer based rust remover and subsequently applying polymer based rust preventive to all exposed reinforced bars, applying one coat epoxy bonding coat over the exiting surfaces of fins/facia/chajja, slab, column, beam and similar structural members to bind the surfaces with new cement plaster,. Rendering required thickness on fair faces of concrete surfaces in cement mortar (1:3) with WPC in two layer and applying two coats of exterior emulsion paint over one coat of alkali-resistant priming paint after preparation of wall surfaces including necessary scaffolding and form work as required complete all as specified and directed by Engineer-in-Charge. (Make- Rendroc RG of FOSROC or equivalent make in Dr. Fixit of Pidilite industries/ IPH-411 of Harjas Coating & Polymers/ M/s Bauchemie/ Sika )

M&L for rendering 15 mm thick in cement mortar (1:6) on fair faces of brick work, finished even and smooth without using extra cement after taking down old cement plaster complete all as specified and directed by Engineer-in-Charge.

M&L for rendering 15 mm thick in cement mortar (1:4) on fair faces of brick work, finished fair and even and smooth without using extra cement after taking down old cement plaster complete all as specified and directed by Engineer-in-Charge.

M&L for rendering 5 mm thick in cement mortar (1:3) on fair faces of concrete surface, as in ceiling and finished even and smooth without using extra cement after taking down old cement plaster complete all as specified and directed.

M&L for preparation of newly plastered surface and applying two coats of interior emulsion paint (Apex ultima) over one coat of alkali resisitant primer paint as per manufacturer instruction complete all as specified and directed by GE. (Note:- After painting works, cleaning of all floors, glass and furniture by own arrangement)