REPAIR OF PUMP MOTOR PANAL BOARD AND OTHER ACCERSSIORIES FORM WARD NO 01,02,03,04,05,06,07 AND 08 IN CHINTAMANI CMC LIMITS

REPAIR OF PUMP MOTOR PANAL BOARD AND OTHER ACCERSSIORIES FORM WARD NO 01,02,03,04,05,06,07 AND 08 IN CHINTAMANI CMC LIMITS

Rewinding of motor up to 3 HP

Rewinding of motor up to 3 HP to 5Hp

Rewinding of motor up to 6.0 HP

Rewinding of motor up to 7.5 HP

Rewinding of motor up to 10 HP

Rewinding of motor up to 12.5HP

Rewinding of motor up to 15HP

Rewinding of motor up to 17.5HP

Rewinding of motor up to 20HP

Rewinding of motor up to 25HP

Rewinding of monoblock motor 25HP

Rewinding of monoblock motor 30HP

Rewinding of monoblock motor 40HP

Rewinding of monoblock motor 50HP

Intermediate piece (I.P.) with I.P. Leaded bronze bush

Oil seal steel bush

Impeller (shell moulded with aluminium bronze)

Discharge outler (D.O.) bearing and D.O. steel bush

Steel bush (D.O. steel bush)

Pump shaft made out of stainless steel centerless ground with key way (upto 8 stumps)

Pump shaft made out of stainless steel centerless ground with key way (8 stumps to 20 Stumps)

Pump shaft made out of stainless steel centerless ground with key way (20 stumps to 40 Stumps)

Pump key (stainless steel)

Pump coupling (stainless steel)

Non-return valve (NRV) assembly complete with rubber 'O' Ring

Upto 3 HP stator

Upto 4 HP stator

Upto 5 HP stator (with one year guarntee)

Upto 3 HP Rotor

Upto 4 HP Rotor

Upto 5 HP Rotor (with one year guarntee)

Thrust bearing block assembly complete with segment bearing pad

Tip carbon/ferrodo padding

Bearing (gum metal) centrifugal cas aluminimum bronze, bearing bush

Test Bearing set

Motor base with pin

transportation of pumping machinaries

Re-erection charges of pumping machineries including overhauling and painting

Lifting and Erectiing of submersible pumpset

Labour charges (over hauling)

Panel Board Indicator Bulb Set

Panel Amps meter

Panel Volts meter

Panel Rotary Switch

Single Cable panel Wiring kit

Double cable panel Wiring kit

Terminal Paltes(3 way)

Terminal Paltes(5 way)

Single Phase Preventer

panel contactor blade set

Panel Culter Hammer Relay or Bare starter & Matched relay

panel Contactor set

panel Contactor coil

panel Contactor base

Panel ON/OFF Button

60AMPS Cut Outs

63AMPS Cut Outs

100AMPS Cut Outs

200AMPS Cut Outs

Repair charge for double cable panel repair

New motor Pump and pipe erection charge

Scanning and logging of bore well