Annual Maintenance of water supply scheme for supply and Repair of OHTcleaning, Pumping main, Distribution main, Valves, Pumpset, Borewell, Well, Hand pump and Minipower pumps at Ward No. 19 to 30 and 34 in Zone -II at Kancheepuram corporation

Amount

Dismantling the existing Cement Concrete pavement and clearing away the debris from the site etc., complete as per standard specification as directed by the Departmental Officers.

Dismantling the existing BT Surface and clearing away the debris from the site etc., complete as per standard specification as directed by the Departmental Officers.

Earth work excavation for pipe line laying in all sub soils and to full depth as may be directed except hard rock requiring blasting inclusive of shoring shuttering, and bailing out of water with initial leads and lifts etc., complete as per standard specification. (Basic rate of five time leaks)

Earth work excavation forother than pipe line laying in all sub soils and to full depth as may be directed except hard rock requiring blasting inclusive of shoring shuttering, and bailing out of water with initial leads and lifts etc., complete as per standard specification.

Supplying and filling in foundation and basement with filling clear river sand in layers of not more than 15cm thick, well rammed, watered and consolidated including cost and conveyance of sand at site and all labour charges and other incidental charges etc., complete complying with std specification.

Supplying and Erecting steel centering including necessary supports for plane surfaces for Reinforcement concrete works such as coluin fottings, column pedestals , plinth beams , grade beams staircase steps, bed block etc. which require only nominal strutting using mild steel sheets of size 90cm x 60 cm and BG stiffened with wlelded mild steel angles of size 25mm x 25mm x 3mm for boarding, laid over silver oak joists of size 10cm x 6.50cm spaced at about 75cm centre to centre or at suitable intarvals etc., complete complying with standard specification ( Payment for centering shall be given after the concrete is laid) for Road sides

Supplying fabricating and placing in position mild steel or ribbed for steel and all reinforced cement concrete works as per the design given including cost of steel and binding wire in all floors etc., complete complying with standard specification. (The contractor will have to make his own arrangements for the supply of MS plain Rod / RTS rod and black binding wire)

Plain Cement Concrete 1:4:8 (One Cement, Four sand and Eight hard broken stone jelly) using 40 mm gauge hard broken granite stone jelly for foundation including dewatering wherever necessary and laid in layers of not more than 15 cm thick well rammed , consolidated and curing etc. complete complying with standard specification

Plain Cement Concrete 1:2:4 (One Cement, Two sand and Four hard broken stone jelly) using 20 mm gauge hard broken granite stone jelly for foundation including dewatering wherever necessary and laid in layers of not more than 15 cm thick well rammed , consolidated and curing etc. complete complying with standard specification

Plain Cement Concrete 1:1 1/2 :3 (one cement, ona and half sand and three hard broken stone jelly) using 20mm size hard broken granite stone jelly including cost and conveyance of materials is to site etc., complete complying with standard specification

Rainforce Cement Concrete 1:1 1/2 :3 (one cement, ona and half sand and three hard broken stone jelly) using 20mm size hard broken granite stone jelly including cost and conveyance of materials is to site etc., complete complying with standard specification

Providing and laying spreading and compacting graded stone aggregate to Wet Mix macadam (WMM) specification including premixing the material with water at OMC in mechanical mix plant carriage to mixed material by tipper to site laying in uniform layers with paver in sub base / base course on well prepared surface and compacting with vibratory roller to achive the desired density complete as per clases 406 of MORTH specification

Hire charges for Diesel Engine 5 HP above including fuel cost, Operation and transportation of the eigine etc., complete for dewatering as per standard specification.

Hire charges for Diesel Engine 7.5 HP above including fuel cost, Operation and transportation of the eigine etc., complete for dewatering as per standard specification.

Supply and leak arresting bond (Entrap plug) 5 Kgs. contain bag including cost and conveyance of materials etc., complete as per ISI standard as directed by the departmental officers.

Jointing AC/PSC pipes and specials with neat cement of cement mortar and spun yarn including caulking and testing to the required pressure (with water including cost of jointing materials) 150mm AC/PSC Pipe

200 mm Pipe

250 mm Pipe

300 mm Pipe

350mm Pipe

400 mm Pipe

450 mm PSC Pipe

500 mm PSC Pipe

600 mm PSC Pipe

Supply and delivery of PVC Pipe, GI Pipes of best approved quality and make confirming to ISS of the following diameters and providing leak proof joints etc., including wherever necessary and redoing the disturbed porting to the original condition complete complying with standard specification (The PVC pipe and GI Pipes should be got approved from the Municipal Engineer before use on works) 25mm PVC PIPE 10Kgf

30mm PVC PIPE 10Kgf

40mm PVC PIPE 10kgf

50mm PVC PIPE 6KSC

63mm PVC PIPE 6KSC

75mm PVC PIPE 6KSC

90mm PVC PIPE 6KSC

110mm PVC PIPE 6KSC

140mm PVC PIPE 6KSC

160mm PVC PIPE 6KSC

180mm PVC PIPE 6KSC

200mm PVC PIPE 6KSC

63mm PVC PIPE 4KSC

75mm PVC PIPE 4KSC

90mm PVC PIPE 4KSC

110mm PVCPIPE 4KSC

140mm PVC PIPE 4KSC

160mm PVC PIPE 4KSC

180mm PVCPIPE 4KSC

200mm PVC PIPE 4KSC

25mm UPVC Pipe

32mm UPVC Pipe

40mm UPVC Pipe

50mm UPVC Pipe

65mm UPVC Pipe

80mm UPVC Pipe

100mm UPVC Pipe

15mm GI Pipe (Medium)

20mm GI Pipe (Medium)

25mm GI Pipe (Medium)

32mm GI Pipe (Medium)

40mm GI Pipe (Medium)

50mm GI Pipe (Medium)

65mm GI Pipe (Medium)

80mm GI Pipe (Medium)

100mm GI Pipe (Medium)

150 mm GI Pipe (Medium)

Cutting PVC rigid pipes and specials true to axis and finishing the ends complete as per standard as directed by the departmental officers. 63mm PVCPIPE 6KSC

75mm PVC PIPE 6KSC

90mm PVC PIPE 6KSC

110mm PVC PIPE 6KSC

140mm PVC PIPE 6KSC

160mm PVC PIPE 6KSC

lowering following PVC rigid pipes and specials to trench any laying to proper grade and alignment jointing with PVC couplers with cement paste and testing to the required pressure including conveyance of water for filling during testing etc., complete complying with standard specification. 40mm PVC pipe

50mm to Upto 75mm PVC pipe

90mm - upto 110mm PVC PIPE

140mm PVC PIPE

180mm PVC PIPE

200mm PVC pipe

Lowering GI pipes and specials in the trenches and laying to proper grade and alignment, jointing with GI Specials and as directed by the TWAD Officers for 15mm to 65mmmm GI Pipe

80mm to 150mm GI Pipe

Supplying and fixing position of the following PVC & GI specials best approved quality confirming to ISS and providing leak proof joints with PVC adhesive etc., and giving connections to the PVC pipe etc., complete complying with standard specifications. (The PVC and GI specials should be got approved from the Municipal Engineer before use on works) 63mm PVC couplers fabricated 6KSC

63mm Bends fabricated 6 ksc

63mm PVC Equal TEE Fabricated 6Ksc (BIS 10124/1982 part V)

63mm PVC Elbow (Mould) BIS 7834/1975 Part VI

63mm PVC MTA (Male Threaded Adopter)

63mm PVCEnd Cap

75mm PVC couplers fabricated 6KSC

75mm Bends fabricated 6 ksc

75mm PVC Equal TEE Fabricated 6Ksc (BIS 10124/1982 part V)

75mm PVC Elbow (Mould) BIS 7834/1975 Part VI

75mm PVC MTA (Male Threaded Adopter)

75mm PVCEnd Cap

90mm PVC couplers fabricated 6KSC

90mm Bends fabricated 6 ksc

90mm PVC Equal TEE Fabricated 6Ksc (BIS 10124/1982 part V)

90mm PVC Elbow (Mould) BIS 7834/1975 Part VI

90mm PVC MTA (Male Threaded Adopter)

90mm PVCEnd Cap

110mm PVC couplers fabricated 6KSC

110mm Bends fabricated 6 ksc

110mm PVC Equal TEE Fabricated 6Ksc (BIS 10124/1982 part V)

110mm PVC Elbow (Mould) BIS 7834/1975 Part VI

110mm PVC MTA (Male Threaded Adopter)

140mm PVC couplers fabricated 6KSC

140mm Bends fabricated 6 ksc

160mm PVC couplers fabricated 6KSC

160mm Bends fabricated 6 ksc

200mm PVC couplers fabricated 6KSC

200mm Bends fabricated 6 ksc

90mm X 63mm Reducer

110mm X 90mm Reducer

110mm X 63mm Reducer

63mm X 20mm Saddle Piece

75mm X 20mm Saddle Piece

90mm X 20mm Saddle Piece

110mm X 20mm Saddle Piece

15mm GI Coupling

15mm GI Elbow

15mm GI Tee

15mm GI Union

15mm GI Check nut

15mm GI Hex Nipple

15mm GM Ferrule

15mm Brass chormium plated Tap

15mm PVC screw type Tap

20mm GI Coupling

20mm GI Elbow

20mm GI Tee

20mm GI Union

20mm GI Check nut

20mm GI Hex Nipple

20mm GM Ferrule

20mm GM Gate Valve

20mm PVCScrew type Tap

25mm GI Coupling

25mm GI Elbow

25mm GI Tee

25mm GI Hex Nipple

25mm GM Gate Valve

32mm GI Elbow

32mm GI coupling

32mm Gate Valve

40mm GI Elbow

40mm coupling

40mm MS Clampset

40mm GM Gate Valve

50mm Elbow plain

50mm GI Coupling

50mm GI Tee

50mm GI Flange set

50mm MS Clamp set

50mm GM Gate Valve

50mm GM Non Return Valve

65mm GI Coupling

65mm GI Flange set

65mm GI Elbow

65mm GI Tee

65mm MS Clamp set

65mm GM Gate Valve

65mm Non Return valve

80mm GI Elbow

80mm GI Tee

80mm GI Coupling

80mm GI Flange set

80mm MS Clampset

80mm GM Gate Valve

100mm GI Coupling

100 mm GI Elbow

100mm CI Flange set

U PVC ball valve with one side ompression end and other side female end as per ISO 4422-4 and Tested as per BS 6920 20mm UPVC Ball valve

25mm UPVC Ball valve

32mm UPVC Ball valve

50mm UPVC Ball valve

63mm UPVC Ball valve

75mm UPVC Ball valve

90mm UPVC Ball valve

110mm UPVC Ball valve

Supplying and Delivery of the following AC Pipes of Class 15 as per IS 1592/2003 best approved quality confirming to ISS of the following diameters etc., including wherever necessary and redoing disturbed portion to the original condition complete complying with standard specifications. (The AC Pipes should be got approved from the Municipal Engineer before use on works) 80mm dia AC Pipe Class 15

100mm dia AC Pipe Class 15

125mm dia AC Pipe Class 15

150mm dia AC Pipe Class 15

200mm dia AC Pipe Class 15

250mm dia AC Pipe Class 15

300mm dia AC Pipe Class 15

350mm dia AC Pipe Class 15

400mm dia AC Pipe Class 15

450mm dia AC Pipe Class 15

Supplying and Delivery of AC collar of Class 15 as per IS 1592/2003 best approved quality confirming to ISS of the following diameters etc., including wherever necessary and redoing disturbed portion to the original condition complete complying with standard specifications. (The AC Pipes should be got approved from the Municipal Engineer before use on works) 80mm dia AC Collar Class 15

100mm dia AC Collar Class 15

125mm dia AC Collar Class 15

150mm dia AC Collar Class 15

200mm dia AC Collar Class 15

250mm dia AC Collar Class 15

300mm dia AC Collar Class 15

350mm dia AC Collar Class 15

400mm dia AC Collar Class 15

450mm dia AC Collar Class 15

Supply and fabrication of MS Collar to the size of 450mm x 6mm thick including the cost of materials fabrication, transporting and labour charges etc., complete.

lowering AC Pipes and speicials in the trench carefully, laying to proper grade and alignment jointing of AC Pipes with simplex joints with ribber rings or with CI detachable joints or with MS couplers and testing to the required pressure including conveyance of water for filling during testing.80mm AC Pipe class 15

100mm AC Pipe class 15

125mm AC Pipe class 15

150mm AC Pipe class 15

200mm AC Pipe class 15

250mm AC Pipe class 15

300mm AC Pipe class 15

350mm AC Pipe class 15

400mm AC Pipe class 15

450mm AC Pipe class 15

500mm AC Pipe class 15

600mm AC Pipe class 15

Cutting A.C. Pipes true to axis and finishing the ends complete as per standards as directed by the departmental officers. 80mm AC Pipe class 15

100mm AC Pipe class 15

125mm AC Pipe class 15

150mm AC Pipe class 15

200mm AC Pipe class 15

250mm AC Pipe class 15

300mm AC Pipe class 15

350mm AC Pipe class 15

400mm AC Pipe class 15

450mm AC Pipe class 15

500mm AC Pipe class 15

600mm AC Pipe class 15

Removing the burst CI pipe line and removal of slushy soil and baling out water and replacing the pipeline with sound pipe including jointing and cost of refilling the pipeline with water for retesting the pipe line etc., complete (Excluding cost of sound pipe and jointing materials and earth work) and as directed by TWAD board officers. 100mm dia CI Pipe

150mm dia CI Pipe

200mm dia CI Pipe

250mm dia CI Pipe

300mm dia CI Pipe

350mm dia CI Pipe

450mm dia CI Pipe

Removing the burst AC pipe line and removal of slushy soil and baling out water and replacing the pipeline with sound pipe including jointing and cost of refilling the pipeline with water for retesting the pipe line etc., complete (Excluding cost of sound pipe and jointing materials and earth work) and as directed by TWAD board officers. 80mm AC Pipe class 15

100mm AC Pipe class 15

150mm AC Pipe class 15

200mm AC Pipe class 15

250mm AC Pipe class 15

300mm AC Pipe class 15

350mm AC Pipe class 15

400mm AC Pipe class 15

450mm AC Pipe class 15

500mm AC Pipe class 15

600mm AC Pipe class 15

Removing the burst PVC pipe line and removal of slushy soil and baling out water and replacing the pipeline with sound pipe including jointing and cost of refilling the pipeline with water for retesting the pipe line etc., complete (Excluding cost of sound pipe and jointing materials and earth work) and as directed by TWAD board officers. 63mm PVC PIPE

75mm PVC PIPE

90mm PVC PIPE

110mm PVC PIPE

140mm to 160mm PVC PIPE

180mm to 200mm PVC PIPE

Jointing the C.I/ D.I - S/S pipes and specials with molten lead and Yarn including caulking the joints. (Including cost of jointing materials) 80mm dia C.I. S/S Pipes and specials

100mm dia C.I. S/S Pipes and specials

125mm dia C.I. S/S Pipes and specials

150mm dia C.I. S/S Pipes and specials

200mm dia C.I. S/S Pipes and specials

250mm dia C.I. S/S Pipes and specials

300mm dia C.I. S/S Pipes and specials

350mm dia C.I. S/S Pipes and specials

400mm dia C.I. S/S Pipes and specials

450mm dia C.I. S/S Pipes and specials

500mm dia C.I. S/S Pipes and specials

Jointing of mechanical joint collar, nuts, gasket and fixing in position as directed by departmental officers 100mm

Disjointing if GI pipes as directed by the department office upto 80mm

above 80mm

Welding of GI Pipe as directed by the department officers upto 80mm

above 80mm

Supply and Delivery and fixing of HDPE tank as per IS 12701/1996 including loading , unloading, transportation and labour charges for fixing of the GI Pipes and specials for connection works including cutting, threading and fixing charges etc., complete 500 litres HDPE tank

1000 liters HDPE tank

2000 litres HDPE tank

5000 litres HDPE tank

Supply and delivery of MS Kiosk of size 0.75m X 0.45m X 0.75m made up of MS angle of size 50mm X50mm X 4mm alround covered with 16guage MS sheet and kiosk door made up of MS Plates of size 25mm X3mm including cutting, welding, grinding, locking arrangement and labour charges etc., complete

Lights Arrangements (Manitance Works) With Genset: Hire Charges for Portable Genset 1.00 KVA with 2 Nos. of 150W flood light including all Incidential Charges, Transportation Crew Charges and fuel Charges Etc., Complete.

Hire Charges for develpying earth moving machinery (Jcb/Polclain) for earthwork including cost of fuel and operation charges etc., complete as per standard specification as directed by the departmental officers.JCB

b) poclain

Engaging Heavy Air Compressor concrete braker for braking concrete portion on hire basis including cost of fuel and operation charges etc., complete as per standard specification as directed by the departmental officers.

Refilling the trenches with suitable excavated earth available along the alignement after the pipes & specials are laid, jointed & tested in layers & watering ramming & consolidation etc., completed as per standard as directed by the departmental officers.

Supply and delivery of the following size of C.I.D Joints as per IS 8794/1988 as per standard specification and as directed by Departmental Engineer.3" C.I.D. Joint

4" C.I.D. Joint

5" C.I.D. Joint

6" C.I.D. Joint

8" C.I.D. Joint

10" C.I.D. Joint

12" C.I.D. Joint

C.I. D/F REFLUX VALVE AS PER I.S. 5312/2004/ PART I/ 84 PN 1.0 WITH BYE-PASS ARRANGEMENTS WITH ISI MARKING 65mm reflex valve

80mm Reflex valve

10mm Reflex valve

Supply and Delivery of CI SINGLE AIR VALVE AS PER ISI 14845/2000 For 15mm Air Valve

25mm Air valve

40mm Air Valve

50mm Air Valve

80mm Air Valve

100mm Air Valve

Supply and Delivery of C.I. DOUBLE AIR VALVE AS PER ISI 14845/2000 For 50mm Air Valve

80mm Air valve

100mm Air Valve

Supplying and delivery of following Size of CI D/F sluice valves with Cap / Wheel as per IS:14846/ 2000 PN 1.0 with ISI marking complete as per standard specification and as directed by Departmental Engineer. 4" Sluice Valve - Heavy ISI

5" Sluice Valve - Heavy ISI

6" Sluice Valve - Heavy ISI

8" Sluice Valve - Heavy ISI

10" Sluice Valve - Heavy ISI

12" Sluice Valve - Heavy ISI

Supply fo Sluice Valve Gun Metal Bar

Supply of Sluice Valve SS Rod

Supply of Sluice Valve GM Rod

Removal, recondition and refixing 2" Sluice Valve Reconditioning Charges

Removal, recondition and refixing 3" Sluice Valve Reconditioning Charges

Removal, recondition and refixing 4" Sluice Valve Reconditioning Charges

Removal, recondition and refixing 5" Sluice Valve Reconditioning Charges

Removal, recondition and refixing 6" Sluice Valve Reconditioning Charges

Removal, recondition and refixing 8" Sluice Valve Reconditioning Charges

Removal, recondition and refixing 10" Sluice Valve Reconditioning Charges

Removal, recondition and refixing 12" Sluice Valve Reconditioning Charges

Removal, recondition and refixing 14" Sluice Valve Reconditioning Charges

Removal, recondition and refixing 16" Sluice Valve Reconditioning Charges

Removal, recondition and refixing 18" Sluice Valve Reconditioning Charges

Removal, recondition and refixing 20" Sluice Valve Reconditioning Charges

Removal, recondition and refixing 22" Sluice Valve Reconditioning Charges

Removal, recondition and refixing 24" Sluice Valve Reconditioning Charges

Labour charges for Erection of New Submersible pumpset with specials in Borewell / Openwell upto 5.00HP

Labour charges for Erection of New Submersible pumpset with specials in Borewell / Openwell above 5.00 HP to 10.00HP

Labour charges for Erection of New Submersible pumpset with specials in Borewell / Openwell above 10.00 HP to 20.00HP

New Panel Board fixing labour charges

Removal of Submersible Pump Set from the Bore well / open well of 1 HP to 5 HP

Removal of Submersible Pump Set from the Bore well / open well of 6 HP to 10 HP

Removal of Submersible Pump Set from the Bore well / open well of 10HP to 20 HP

Erecting the Submersible Pump Set in the Bore well / open well of 1 HP to 5 HP

Erecting the Submersible Pump Set in the Bore well / open well of 6 HP to 10 HP

Erecting the Submersible Pump Set in the Bore well / open well of 10 HP to 20 HP

Rewinding of 1.00 HP to 2.00HP submersible motors of 1 phase 220 Volts 50Hz 2880 rpm with includes removal of materials to be deducted including cost of winding wires, sleeves and Rotor reconditioning, motor& rotor core resetting, Motor copper cable 3 mts. including servicing commissioning and testing of motor (guarantee period for six months

Rewinding of following HP submersible motors of 3 phase 440 Volts 50Hz 2880 rpm with includes removal of materials to be deducted including cost of winding wires, sleeves and Rotor reconditioning, motor& rotor core resetting, Motor copper cable 3 mts. including servicing commissioning and testing of motor (guarantee period for six months Upto 3.00HP

Above 3 HP & up to 6 HP

Above 6 HP & up to 10 HP

Above 10 HP & up to 20 HP

Motor top bearing bush (GM)

Motor bottom bearing sleeve

Thrust bearing top (G.M)

Thrust bearing bottom (G.M)

Pump top bearing bush

Pump top bearing sleeve

Pump impeller (G.M)

Pump Bowl (CI)

Pump Diffuser housing (CI)

Painting the pump sets.

Removal of Hand Pump Removal of deep well hand pumps from borewell upto 40m

Removal of deep well hand pumps from borewell above 40m

Erection of deep well hand pumps upto 40 m

Erection of deep well hand pumps above 40m

Supply of India Mark II Hand Pump body Only

Supply of India Mark II Hand Pump Head assembly Only

Supply of India Mark II Hand Pump Discharge Chamber Only.

Supply of India Mark II Hand Pump Cylinder

Supply of India Mark II Hand Pump Plunger Rod. 3m length

1.5 Sq.mm 3 core Submersible Cable

2.5 Sq.mm 3 core Submersible Cable

4 Sq.mm 3 core Submersible Cable

6 Sq.mm 3 core Submersible Cable

10 Sq.mm 3 core Submersible Cable

Removal of Stuck up Submersible Pump Set using special tools etc., from the bore well.

Motor Coupling

Motor top bearing housing (CI)

Pump Shaft (SS)

Diffuser Housing (CI)

Motor Core resetting charges 2 HP to 20 HP

Pump shaft reconditioning charges 2 HP to 20 HP

Motor Reconditioning cherges 2 HP to 20 HP

Transportation of submersible pump set 2 HP to 20 HP

2" Sluice Valve shaft and Check Nut Replacement work

3" Sluice Valve shaft and Check Nut Replacement work

4" Sluice Valve shaft and Check Nut Replacement work

5" Sluice Valve shaft and Check Nut Replacement work

6" Sluice Valve shaft and Check Nut Replacement work

8" Sluice Valve shaft and Check Nut Replacement work

10" Sluice Valve shaft and Check Nut Replacement work

12" Sluice Valve shaft and Check Nut Replacement work

14" Sluice Valve shaft and Check Nut Replacement work

16" Sluice Valve shaft and Check Nut Replacement work

2" Flange Washer

2 1/2" Flange Washer

3" Flange Washer

4" Flange Washer

5" Flange Washer

6" Flange Washer

8" Flange Washer

10" Flange Washer

12" Flange Washer

Supply and delivery of following Single Phase submersible pump sets Suitable for Bore well with ISI mark without Panel board. 1.00 HP Motor pump set repueted make ISI Brand 15LPM X60m

15 LPM X 50m

15 LPM x 80M

Supply and delivery of following Three Phase submersible pumpsets Suitable for 150mm dia Bore well as per IS8034/2002 without Panel board. 50LPM X60m

50 LPM X 75m

50 LPM X 100m

100LPM x 75M

100LPM x125 M

100LPM x 175M

125LPM x 75M

150LPM x 100M

200LPM x 75M

200LPM x 125M

Supply and delivery of following Three Phase submersible pumpsets Open well type as per IS 14220/2002 without Panel board. 50LPM X60m

50 LPM X 100m

100LPM x 75M

100LPM x125 M

125LPM x 75M

200LPM x 75M

200LPM x 100M

250LPM x 125M

Supply and Delivery of 1.00 HP Single Phase Panel Board starters with Auto Restart Facility

Supply and Delivery of 1.50 HP Single Phase Panel Board starters with Auto Restart Facility

Supply and Delivery of 2.00 HP Single Phase Panel Board starters with Auto Restart Facility

Supply and Delivery of 3 Phase Phase Panel Board DOL starters with two level guard and Auto Restart Facility suitable for Three phase submersible pumpset 3.00HP

For 5.00 HP

Supply and Delivery of 3 Phase Phase Panel Board Star-Delta starters with two level guard and Auto Restart Facility suitable for Three phase submersible pumpset For 7.50 HP

for 10.00 HP

For 12.50 HP

For 15.00 HP

For 20.00 HP

Supply and delivery of following 1.1 KV Grade Armoured Aluminium conductor LTUG Cable confirming to IS 7098 PART I/1988 with ISI marking 4 Sq. mm 3 core

6 Sq. mm 3 core

10 Sq. mm 3 core

10 Sq. mm 4 core

16 Sq. mm 3 core

25 Sq. mm 3 core

35 Sq. mm 3 core

50 Sq. mm 3 core

70 Sq. mm 3 core

95 Sq. mm 3 core

120 Sq. mm 3 core

150 Sq. mm 3 core

Jointing of following 1.1 KV Grade Armoured Aluminium conductor LTUG Cable confirming to IS 1554 PART I with ISI marking 4 Sq. mm 3 core

6 Sq. mm 3 core

10 Sq. mm 3 core

16 Sq. mm 3 core

25 Sq. mm 3 core

35 Sq. mm 3 core

50 Sq. mm 3 core

70 Sq. mm 3 core

95 Sq. mm 3 core

Laying below GL including Earthwork Upto 95 Sq.mm

Cable clamp up to 95 Sq.m

Repairs to Centrifugal Pump Sets. Rewinding of Motor up to 3 HP

Rewinding of motor above 3 HP up to 6 HP

Rewinding of motor above 6 HP up to10HP

Rewinding of motor above 10 HP up to 20 HP

labour charges for Refitting of Pump Set upto 10 HP

labour charges for Refitting of Pump Set above 10 to 20 HP

Motor Bearing up to 7.5 HP

Above 7.5 HP to 20 HP

Pump Bearing up to 7.5 HP

Above 7.5 HP to 20 HP

Pump Bush up to 7.5 HP

Above 7.5 HP to 20 HP

Pump Impeller up to 7.5 HP

Above 7.5 HP to 20 HP

Motor Pump Coupling 3 HP to 20 HP

Motor Fan 3 HP to 20 HP

Packing Rope 12 mm Asbestos

Packing Rope 10 mm Asbestos

Packing Rope 16 mm Asbestos

Pump Seal 3 HP to 20 HP

Packing Gland 3 HP to 20 HP

Suction Pipe Removing and Refitting charges 3 HP to 20 HP

Motor varnishing and servicing etc., 3 HP to 20 HP

Pump shaft Reconditioning charges 3 HP to 20 HP

Rotor Reconditioning charges 3 HP to 20 HP

Servicing Commissioning and testing of coupled type Centrifugal Pump 3 HP to 20 HP

Painting the pump set 3 HP to 20 HP

Transporting the pump set 3 HP to 20 HP

Supply and delivery of following sizes of Nylon Hoses as per ISI standard and as directed by the dept. officers ect., complete. 2" Green Hose Pipe Heavy

2 1/2" Green Hose Pipe Heavy

3" Green Hose Pipe Heavy

4" Green Hose Pipe Heavy

Charges for developing the borewell with air compressor of 300 CFM capacity (Minimum 8 Hours) including transportation labour and fuel charges for compressor as directed by TWAD Board Officers and conducting yield test by 'V' notch method.

Labor charges for Desalting light or sandy soil from the sump below including the charges for special tools & plant and air compressor etc., complete. 20,00,000 liter capacity OHT

b) 10,00,000 liter capacity OHT

c) 8,50,000 liter capacity OHT

d) 5,00,000 liter capacity OHT

e) 2,00,000 liter capacity OHT

f) 1,00,000 liter capacity OHT

Supplying and Delivery of DUCTILE IRON SOCKET/ SPIGOT PIPES FOR CLASS K7 AS PER IS 8329/2000 best approved quality confirming to ISS of the following diameters etc., including wherever necessary and redoing disturbed portion to the original condition complete complying with standard specifications. (The AC Pipes should be got approved from the Municipal Engineer before use on works) 100 mm DI K7 Pipe.

150 mm DI K7Pipe.

200 mm DI K7 Pipe.

250 mm DI K7 Pipe.

300 mm DI K7 Pipe.

350 mm DI K7 Pipe.

400 mm DI K7 Pipe.

450 mm DI K7 Pipe.

Supply and run of 25mm x 3mm tinned copper flat with necessary clamps / supports on wall / floor / ground for earth connection(SD 76)

Supply and fixing of 32 A TPN MCB switch on suitable angle iron frame work with MS cable entry boxes with earth connection only with Standard enclosure as per standard. (SD162A).

Supply of Power capacitor for power factor improvement with Oil filled with discharge resistance 3 phase 415 / 440V 50HZ confirming to ISS:2384 with ISI marking and as directed by the dept. officers.

Wiring with 2x4 sqmm(56/0.3) PVC insulated SC unsheathed Cu.Conductor cable of 1100V grade in suitable pipe on wall and ceiling with PVC accessories with 150 mm x 100 mm x 63mm TW switch box for 15 A 3 pin non inter locking CS plug with painting of suitable colour, with continuous earth wire connection of 14 SWG TC wire for open PVC power plug point. (SD39)

PVC Insulated Single Core Multi Strand Fire Retardant Flexible Copper Cable With ISI Mark Conforming To Is 694/1990 14/0.3 (1 sq.mm)

Condeser 50MFT & 100MFT for 1.00HP Panel Board

AMS Meter

Vote Meter

Preventer – Single Phasing - 1. HP

Relay upto 10A -

Relay upto 20A

Relay upto 30A

7/18 Three Core Wire

ON/OFF Switch

3/20 Copper Three Core Wire

No volt coil

Over Load Coil For Starter

Preventer 10 HP & 7.5 HP 32A

Relay - 34 AMS

Volt Meter

AMS Meter

ON/OFF Switch

Copper Nappes For Starter

Low Vote Coil For Starter

Over Load Coil For Starter

Starter Oil

Labour charges for 40mm to 100mm Gate Valve Removing and Replacement

Labour charges for Fixing of Air valve

1 HP to 20 HP Panal Board Removel Labour Charges

Gate Valve Removel & Fixing Labour Charges for OHT

Sintex Tank Removel & Fixing Labour Charges for including pipe connection

Labour charges for fixing of new Tap connection including cost of earthwork , fixing of pipe and specials, refilling etc., complete

labour charges for Replacement of Tap at HDPE tank or Public Tap

Inlet and Outlet pipe Fixing Charges For Sintex

Stay Wire

Service Pipe 11/4"

Teak Wood Meter Board 0.75m X0.5m

labour charges for replacement of Circuit Breaker - 15 AMS to 250 AMS

Labour Charges For 3 Phase Service Wire laying

Labour Charges For 1 Phase Service Wire laying

Transporting charges of HDPE Sintex tank and Pedastal for kancheepuram corporation Area Koil festivals, Govt. Festivals , etc., water supply arrangement including charges for Transporting , loading, unloading, fixing charges, etc.,

supply and Fixing of 4feet 20w LED Tube light including cost tubelight, wire and fixing labour charges

PVC Pipes

GI Pipes

Copper cables

Aluminium cables -

A.V ENTERPRISES (BID ID -1262661)