REPAIR REPLACEMENT TO PLUMBING SANITARY FITTINGS AND KOTA STONE FLOORING AT VARIOUS BLDGS AT AD CENTRE INCLUDING REPAIR REPLACEMENT OF ELECTRIC FITTINGS AND FIXTURES WIRING AT 19 AD REGT AD STATIC WKSP MH 707 TSU LT AD BTY FIRING RANGE HANGERS

Amount

Demolition of cement concrete un reinforced in ground floor and paving n exc 15cm thick (below or above ground level) complete all as specified and directed.

M&L for PCC 1:2:4 type B-0 using 12.5 mm graded stone aggregate as in sub base flooring 100 mm thick surface finished even and rough to receive the topping layer complete all as specified and directed.

M&L for Machine cut kota stone slab flooring mirror finished 18-20 mm thick (each slab not less than 0.25 Sqm) over cement screed base laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab with 20 mm thick screed bed or bedding layer in cement mortar 1:4, including rubbing and polishing complete all as specified and directed.

M&L for Machine cut kota stone in riser of steps, skirting, dado and pillar mirror finished 20-25 mm thick over cement base rendering laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab with 15 mm thick screed bed or bedding layer in cement mortar 1:4, including rubbing and polishing complete all as specified and directed.

Taking up or down 15 mm bore GI steel tubing & connections including cleaning for refixing or removal to store complete all as specified and directed.

Taking up or down 20 mm bore GI steel tubing & connections including cleaning for refixing or removal to store complete all as specified and directed.

Taking up or down 25 mm bore GI steel tubing & connections including cleaning for refixing or removal to store complete all as specified and directed.

S & F 15mm bore GI galvanized steel tubing medium grade with all fittings and fixed complete to walls and ceiling or laid in floors complete all as specified and dircted.

S & F 20mm bore GI galvanized steel tubing medium grade with all fittings and fixed complete to walls and ceiling or laid in floors complete all as specified and dircted.

S & F 25mm bore GI galvanized steel tubing medium grade with all fittings and fixed complete to walls and ceiling or laid in floors complete all as specified and dircted.

Re-fixing of old 15mm bore GI steel tubing comlete all as specified and directed.

Re-fixing of old 20mm bore GI steel tubing comlete all as specified and directed.

Re-fixing of old 25mm bore GI steel tubing comlete all as specified and directed.

Dismantling PVC water tanks exc 500 ltr but n. exc 1000 ltr capacity and removing to store complete all as specified and directed.

S&F 500 ltr capacity Rotational moulded polyethylene water storage tanks (cylin-drical vertical with closed top) hoisted and fixed in position all as specified in SSR Part I complete all as specified and directed.

S&F 1000 ltr capacity Rotational moulded polyethylene water storage tanks (cylin-drical vertical with closed top) hoisted and fixed in position complete all as specified and directed. in SSR Part I.

S&F in repair 20mm dia ball Brass valves, high pressure, with polythene float and fly nut complete, screwed for iron pipes or brass ferrule and fixed as in PVC Service tanks complete all as specified and directed.

S&F in repair 25mm dia ball Brass valves, high pressure, with polythene float and fly nut complete, screwed for iron pipes or brass ferrule and fixed as in PVC Service tanks complete all as specified and directed.

S & F in repairs 20mm bore gun metal gate valves with iron wheel head screwed both ends for iron pipe and fixed complete all as specified and directed.

All as per item No 19 above but 25mm bore

S&F in repairs sinks made of stainless steel 1mm thick kitchen or laboratory with plugs, washers and wastes; including bedding in cement mortar on to dwarf wall or including fixing cantilever brackets and connecting union to pipe, overall size 485mm x 420mm bowl complete all as specified and directed.

S & F in repairs, vitreous china wash basin, white, flat back, size 550x400mm with brackets, inc. cutting for & pinning in ends of brackets, inc. waste fitting, PTMT 32mm dia and pillar taps of PTMT 15mm complete all as specified and directed.

S&F in repairs viterious china squatting pan orissa pattern size 580x440mm white integal foot rest & including 10 lit cap flushing cistern PVC low level & flush pipe including concrete bedding & including P trap 100mm complete all as specified and directed.

S&F in repair Vitreous china bowl type Urinal flat back ,size 465x355x265 withgrating and Union for discharge pipe including all necessary items complete all as specified and directed.

S & F in repairs, vitreous china wash down water closet pan (pedestal pattern), white, 'P' or 'S' type, inc. 10 litres, PVC flushing cistern, L L, white, with inlet,ball valve, float & brackets, inc. flush pipe, PVC tube 32mm dia. & inc. plastic water closet seat, black, closed pattern with flat bottem, & cover & M S CP or aluminium hinging device, complete all as specified and directed.

S&F in repair PVC low level flushing cistern (white) 10 Ltrs capacity with internal fitting, push button operated type with and including bracket, PVC flush pipe etc complete all as specified and directed.

S&F health faucet with fluxi pipe and hand shower, the length of hose 1.50mt fitted to the tap complete all as specified and directed.

S&F in repairs EWC seat cover of any pattern including cover and Mild steel chromium plated hinging devices of any colour complete all as specified and directed.

S&F in repair 15 mm fancy type pillar taps chromium plated cast copper alloy with capstan heads screwed down high pressure with or without lettered ‘Hot’ or ‘cold’ with long screwed shanks and fly nuts complete all as specified and directed.

S&F in repair 15 mm fancy type stop valve cast copper alloy chromium plated screwed high pressure with crutch or butter fly handle screwed both ends for iron or union and fixed to 15 mm GI tube complete all as specified and directed.

S&F in repair 15mm bore bib tap cast copper alloy chromium plated with crutch or butterfly handle fixed to 15 mm bore GI tube complete all as specified and directed.

S&F in repair brass elbows 15 mm bore both ends screwed and fixed complete all as specified and directed.

S&F in repair brass elbows 20 mm bore both ends screwed and fixed complete all as specified and directed.

S&F in repair 15 mm bore brass union to connect iron to polyethylene and fixed complete all as specified and directed.

S&F in repair 20 mm bore brass union to connect iron to polyethylene and fixed complete all as specified and directed.

S&F Grating doom125 mm dia with waste hole of PTMT Minimum weight 40 gms complete all as specified and directed.

S&F in repairs 125 mm bore brass chromium plated shower rose complete all as specified and directed

S&F in repairs 32mm bore Waste fittings, brass, chromium plated for glazed ware sinks, basins, etc.with long screwed shanks and fly-nuts, flange end bedded in red lead cement and other end fixed.

Demolition and breaking up PVC(SWR) pipes any size in any position complete all as specified and directed.

S&F 75 mm bore PVC(SWR) pipes single socketed in any length with rubber ring joints fixed to walls/floor complete all as specified and directed.

All as per item No 40 above but 110mm bore

S&F PVC (SWR)bend 110mm bore

S&F PVC (SWR)bend 75mm bore

S&F PVC(SWR) bend 110mm bore with access door

S&F PVC (SWR) bend 75 mm bore with access door.

S&F PVC (SWR) vent cowl, 100mm bore

S&F PVC (SWR) vent cowl, 75mm bore

S&F stack clamps out of 50mm by 5mm flat iron and 16mm dia round iron stays, including bolts and nuts and securing ends of stays to wall pipe complete all as specified and directed.

S&F in repairs PVC connection 15mm size with PTMT nuts, of 450 mm length complete all as specified and directed.

M&L for preparation of newly plastered surfaces of walls and applying three coat of white wash complete all as specified and directed.

M & L for one coats of cement based paint on old plastered surface of walls including preparation of surface complete all as specified and directed.

Taking down carefully old UNSV aluminium point wiring with wooden batten /concealed and all accessories of(light, fan, socket or power) such as switches socket ceiling rose, fan regulators, light fitting, main switches DB’s etc and making good disturbed surface complete all as specified and directed.

Taking down old/unserviceable distribution board by disconnection of electric connection carefully SPN Dbs/TPN DBs/ Main switch including old unserviceable MCCBs/ MCBs isolators etc and making good to disturbed surface complete all as specified and directed.

Taking down care fully copper/ aluminium sub main wiring of any size from surface / concealed / existing conduit of any height and removing materials at site and making good disturbed surfaces of walls, floors roofs etc complete all as specified and directed

M&L in repairs for point wiring in repairs with 1.5 Sqmm signle core PVC insulated unsheathed copper FRLS multi stranded conductor cable in and including concealed PVC conduit of size 20/25 MM ISI marked inclusive of tees, bend, elbows etc upto and including sunk in anodized pressed steel box for housing switch socket etc with white laminted 3mm thick sheet cover ISI marked of suitable size complete including PVC insulated multi stranded copper conductor 1.5 Sqmm FRLS cable as earth wire to common earth dolly for connection to ceiling rose to earth terminal incuding cutting, chasses and making good disturbed surface to match with existing finish with plaster complete all as specified and directed for the following:- (a) One light point controlled by one, one way switch.

All as per item No 56 above but for One fan point controlled by one, one way switch.

All as per item No 56 above but for One exhaust fan point controlled by one, one way switch.

All as per item No 56 above but for One 5 Amp socket point controlled by one switch on independent board

All as per item No 56 above but for One 5 Amp socket point controlled by one switch on same board

All as per item No 56 above but for One light point controlled by two ways switches 5Amp

All as per item No 56 above but with cable PVC insulated 4.0 Sq mm in and including PVC Conduit incl continuous earthing with cable PVC insulated 4.0 Sq mm copper conductor for power socket 15Amps complete all as specified and directed. (Make : Anchor/ Standard/ Finolex/Havells)

M&L in repairs for point wiring in repairs with 1.5 Sqmm signle core PVC insulated unsheathed copper FRLS multi stranded conductor cable in and including PVC casing capping of size 20/25 MM ISI marked inclusive of tees, bend, elbows etc upto and including sunk in anodized pressed steel box for housing switch socket etc with white laminted 3mm thick sheet cover ISI marked of suitable size complete including PVC insulated multi stranded copper conductor 1.5 Sqmm FRLS cable as earth wire to common earth dolly for connection to ceiling rose to earth terminal incuding cutting, chasses and making good disturbed surface to match with existing finish with plaster complete all as specified and directed for the following:- One light point controlled by one, one way switch.

All as per item No 63 above but One fan point controlled by one, one way switch.

All as per item No 63 above but One exhaust fan point controlled by one, one way switch.

All as per item No 63 above but One 5 Amp socket point controlled by one switch on independent board

All as per item No 63 above but One 5 Amp socket point controlled by one switch on same board

All as per item No 63 above but One light point controlled by two ways switches 5Amp

All as per item No 63 above but with cable PVC insulated 4.0 Sq mm in and including PVC Conduit incl continuous earthing with cable PVC insulated 4.0 Sq mm copper conductor for power socket 15Amps complete all as specified and directed. (Make : Anchor/ Standard/ Finolex/Havells)

M&L for point wiring with 1.5 Sqmm signle core PVC insulated unsheathed copper FRLS multi stranded conductor cable in and including concealed PVC conduit of size 20/25 MM ISI marked inclusive of tees, bend, elbows etc upto and including GI sunk boxes of size 1.2 mm thick and 60mm deep with earth dolly duly, covered with modular white cover plate with inner frame suitable for modular switch/ socket of suitable size complete including PVC insulated multi stranded copper conductor 1.5 Sqmm FRLS cable as earth wire to common earth dolly for connection to ceiling rose to earth terminal incuding cutting, chasses and making good disturbed surface to match with existing finish with plaster complete all as specified and directed for the following:- (a) One light point controlled by one, one way switch.

All as per item No 70 above but for One fan point controlled by one, one way switch.

All as per item No 70 above but for One exhaust fan point controlled by one, one way switch.

All as per item No 70 above but for One 5 Amp socket point controlled by one switch on independent board

All as per item No 70 above but for One 5 Amp socket point controlled by one switch on same board

All as per item No 70 above but for One light point controlled by two ways switches 5Amp

All as per item No 70 above but with cable PVC insulated 4.0 Sq mm in and including PVC Conduit incl continuous earthing with cable PVC insulated 4.0 Sq mm copper conductor for power socket 15Amps complete all as specified and directed. (Make : Anchor/ Standard/ Finolex/Havells)

M&L in repairs switch socket combination 2-in-1, 5 pin 5 Amp complete all as specified and directed. (Make : Anchor/ Legrand/ Schneider/Polycab).

M&L in repairs socket outlet 5 pin 5 Amp complete all as specified and directed. (Make : Anchor/ Legrand/ Schneider/Polycab).

M&L in repairs switch socket combination 2-in-1, 5 pin 5 and 15 Amp complete all as specified and directed. Make : Anchor/ Legrand/ Schneider/Polycab).

M&L in repairs switch piano (Flush type) 5 amps, 240 Volts, single pole one way complete all as specified and directed. (Make : Anchor/ Legrand/ Schneider/Polycab).

M&L in repairs switch piano (Flush type) 5 amps, 240 Volts, single pole two way complete all as specified and directed. (Make : Anchor/ Legrand/ Schneider/Polycab).

M&L in repairs switch piano (flush type) 15 Amps , 240 volts, 50 Hz one way complete all as specified and directed. (Make : Anchor/ Legrand/ Schneider/Polycab).

M&L in repairs Socket outlet 2 in 1, 3 pin, 5 and 15 amp flush type complete all as specified and directed. Make : Anchor/ Legrand/ Schneider/Polycab).

M&L in repairs stepped type electronic fan regulator flush type on the existing phenolic laminated sheet etc. as reqd complete all as specified and directed. (Make : Anchor/ Legrand/ Schneider/Polycab).

M&L in repairs Bell push, flush type, 5 amp, 240 volts, 50 Hz complete all as specified and directed. (Make : Anchor/ Legrand/ Schneider/Polycab).

S&F in repairs modular socket 6A , 2/3 pin combined 2 module complete all as specified and directed Make :- ABB / Crabtree / Cona/Anchor/Legrand

S&F in repairs modular switch6A complete all as specified and directed Make :- ABB / Crabtree / Cona/Anchor/Legrand

S&F in repairs modular switch 1 way 16A, 1 module complete all as specified and directed Make :- ABB / Crabtree / Cona

S&F modular socket 6A / 16A , 2/3 pin combined 2 module complete all as specified and directed Make :- ABB / Crabtree / Cona/Anchor/Legrand

S&F in repairs modular 6A 1 module 2 way switch complete all as specified and directed Make :- ABB / Crabtree / Cona/Anchor/Legrand

S & F in repairs for modular step type fan regulator 120 watt 2 module suitable for 230 volt 50 Hz AC supply complete all as specified anddirected. Make :- ABB / Crabtree / Cona/Anchor/Legrand

S & F in repairs for for Bell push modular 6 Amps single module complete all as specified anddirected. Make :- ABB / Crabtree / Cona/Anchor/Legrand

S&F Ceiling rose 3 terminal complete all as specified and directed Make :- ABB / Crabtree / Cona/Anchor/Legrand

S&F Modular switch 2 way 6A, 1 module, 240 volts complete all as specified and directed. Make :- ABB / Crabtree / Cona/Anchor/Legrand

S&F modular white cover plate with frame for module 3 complete all as specified and directed.

All as per item No 95 above but for 4 module complete all as specifed and directed.

All as per item No 95 above but for 6 module complete all as specifed and directed

All as per item No 95 above but for 08 module complete all as specifed and directed.

S&F Metal flush box 1/2 module complete all as specified and directed

S&F Metal flush box 3 module complete all as specified and directed

S&F Metal flush box 4 module complete all as specified and directed

S&F Metal flush box 6 module complete all as specified and directed

S&F Bakelite Sheet cover plate of size (5x5) complete all as specified and directed

S&F Bakelite Sheet cover plate of size (8x5) complete all as specified and directed

S&F Bakelite Sheet cover plate of size (11x13) complete all as specified and directed

S& F in replacement PVC Gang box Square type for fittings complete all as specified and directed

S& F in replacement PVC Board box of (4x4) size complete all as specified and directed

S& F in replacement PVC Board box of (6x8) Size complete all as specified and directed

S& F in replacement PVC Board box of (8x10) Size complete all as specified and directed

M&L in repairs Buzzer, Ding Dong AC. 230 volts, single pole complete all as specified and directed.

S & F in repair LED light fitting 18/ 20 Watt T5 batten type,PVC extruded batten with decorative end caps complete with polycarbonate /glass tube 4Ft White , internally pre-wired and including connecting up with suitable twisted flexible copper conductor cable with suitable size complete all as specified and directed. Note : Contractor will write in permt maker CA No and date of installation on the light fitting

S & F in repair of light fittings (2Ft) with wall mounted LED pattern with polycarbonate housing & integrated electronic driver of 10W cap T5(max lenght upto 600mm) complete all as specified and directed. Note : Contractor will write in permt maker CA No and date of installation on the light fitting

S&F in repair LED globe light decorative wall light fixture made up of polycarbonate, suitable for 9W LED bulb B22 base complete incl 9 watt bulb complete all as specified and directed. Note : Contractor will write in permt maker CA No and date of installation on the light fitting

S&F in repair aesthetically designed, decorative recess mounted 3Watts (Round) 3000 K spot light for low ceiling height complete all as specified and directed. Note : Contractor will write in permt maker CA No and date of installation on the light fitting

S&F in repair aesthetically designed, decorative recess mounted 5 Watts (Round) 3000 K spot light for low ceiling height complete all as specified and directed. Note : Contractor will write in permt maker CA No and date of installation on the light fitting

S&F in repair aesthetically designed, decorative recess mounted 12 Watts (Round) 6500K spot light for low ceiling height complete all as specified and directed. Note : Contractor will write in permt maker CA No and date of installation on the light fitting

S&F in repair aesthetically designed, decorative recess mounted 06 Watts (Round) 6000K spot light for low ceiling height complete all as specified and directed. Note : Contractor will write in permt maker CA No and date of installation on the light fitting

S&F in repairs crysta chip on board (COB) swivel downlight with crisp light throw and high CRI with capacity 3Watts complete 220 volts complete all as specified and directed. Note : Contractor will write in permt maker CA No and date of installation on the light fitting.

S&F in repairs crysta chip on board (COB) swivel downlight with crisp light throw and high CRI with capacity 6 Watts complete 220 volts complete all as specified and directed Note : Contractor will write in permt maker CA No and date of installation on the light fitting

S&F in repairs LED recessed panels with inbuild occupancy sensorwith inbuilt capability of switching on/off basis the occupancy in any space and is perfect for general and office lighting with capacity 36 watts 2x2 ft complete all as specified and directed. Note : Contractor will write in permt maker CA No and date of installation on the light fitting

S & F in repairs high efficiency 2x1 ft recess LED flat panel with high brightness LED for glare free homogenous illumnination with capacity 20 watts complete all as specified and directed. Note : Contractor will write in permt maker CA No and date of installation on the light fitting

S&F in replacement of bldg security light fitting LED type of 25 watt New generation energy saving & environmental friendly long life Versatile pressure die-cast aluminium IP66 luminaire with high power LEDs as light source and electronic driver. mounting bracket suitable to house the light fittinhg , with its Galvanised Flat Iron clamps conntected nuts bolts etc complete all as specified & directed Note : Contractor will write in permt maker CA No and date of installation on the light fitting

S&F in repairs baybrite flare multi functional LED luminaire of capaity 120 watts complete all as specified and directed Note : Contractor will write in permt maker CA No and date of installation on the light fitting

M&L in replacement of 2 Runs of cable PVC insulated but unsheathed 4.0 Sq mm, stranded copper conductor in and including PVC conduit with continuous earthing cable PVC insulated 2.5 Sq mm, stranded copper conductor complete all as specified and directed. (Cable make Anchor/ Havells /Finolex)

M&L in replacement of 2 Runs of cable PVC insulated but unsheathed 1.5 Sq mm, stranded copper conductor in and including PVC conduit with continuous earthing cable PVC insulated 1.0 Sq mm, stranded copper conductor complete all as specified and directed. (Cable make Anchor/Havells/Finolex) Note :-2 runs of cable, one run of earth wire (copper cable) & one run of PVC conduit shall be measured as one running metre.

M&L in replacement of 2 Runs of cable PVC insulated but unsheathed 2.5 Sq mm, stranded copper conductor in and including PVC conduit with continuous earthing cable PVC insulated 1.5 Sq mm, stranded copper conductor complete all as specified and directed . (Cable make Anchor/Havells/Finolex) Note :-2 runs of cable, one run of earth wire (copper cable) & one run of PVC conduit shall be measured as one running metre.

M&L in replacement of 2 Runs of cable PVC insulated but unsheathed 6.0 Sq mm, stranded copper conductor in and including PVC conduit with continuous earthing cable PVC insulated 4.0 Sq mm, stranded copper conductor all as specified and directed.(Cable make Anchor/Havells/Finolex) Note :-2 runs of cable, one run of earth wire (copper cable) & one run of PVC conduit shall be measured as one running metre.

M&L in replacement of 2 Runs of cable PVC insulated but unsheathed 10 Sq mm, stranded copper conductor in and including PVC conduit with continuous earthing cable PVC insulated 6.0 Sq mm, stranded copper conductor complete all as specified and directed. (Cable make Anchor/Havells/Finolex) Note :-2 runs of cable, one run of earth wire (copper cable) & one run of PVC conduit shall be measured as one running metre.

S& F in replacement 3 core 1 Sqmm round Sheathed copper wire complete all as specified and directed

S&F in replacement sheet metal enclosure vertical DBs with provision for FP MCCB frame upto 100A in 16,KA as incomer 4 way double door made complete all as specified and directed. Make Standard/ Indo asian/ Havells/Anchor

S & F in replacement sheet metal enclosure double door MCB DB, 220 volts, SPN 12 way complete all as specified and directed.

S & F in replacement sheet metal enclosure double door MCB DB 220 Volts, SPN 8 way complete all as specified and directed.

S & F in replacement sheet metal enclosure double door MCB DB 220 volts , TPN 4 way complete all as specified and directed.

S & F in replacement sheet metal enclosure double door MCB DB 415 Volts, TPN 8 way complete all as specified and directed.

S & F in replacement sheet metal enclosure double door MCB DB 415 Volts, TPN 12 way complete all as specified and directed.

S&F in repairs 5-32 amp rating 240V, 10KA 'C' curve miniature circuit breaker (MCB) Single pole to be fixed in DB complete with connection testing and commissioning.

S&F in repairs 32 amp rating 240V, 10KA 'C' curve miniature circuit breaker (MCB) Single pole neutral to be fixed in DB complete with connection testing and commissioning.

S&F in repairs 40-63 amp rating 240V, 10KA 'C' curve miniature circuit breaker (MCB) Single pole neutral to be fixed in DB complete with connection testing and commissioning.

S&F in repairs MCCB 4 Pole, 415 V, fixed type, 25 to 100 Amps with breaking capacity 16 KA complete all as specified and directed

S&F in repairs MCCB 4 Pole, 415 V, Adjustable type, 160 Amps with breaking capacity 36 KA complete all as specified and directed

S&F in repairs 415V 10KA 'C' curve miniature circuit breaker (MCB) TPN 16 to 32 Amps current carrying capacity in the DB complete with connection testing and commissioning.

S&F in repairs 415V 10KA 'C' curve miniature circuit breaker (MCB) TPN TPN 40 To 100 AMPs current carrying capacity in the DB complete with connection testing and commissioning.

S&F in replacement of single pole and neutral enclosure with a two pin and earth plug socket 240 V with one MCB SP ‘C’ series rating 20 to 30 Amp complete all as specified and directed. Make: L&T/standard/CG/ C&S / Havells

M&L in replacement for earthing with galvanized steel earth plate electrode 600 x 600 x 6mm thick, buried directly in ground(earth pit not less than 2.25 mtrs deep below ground level)with top edge of the plate not less than 1.5 mtr below normal ground level, connected to galvanized earth lead wire 4 mm dia by means of bolts, nuts, check nuts and washers protected with & including 15 mm dia light grade GI pipe necessary excavation and earth works, charcoal and common salt filling, watering arrangement with 20 mm GI pipe light grade including PCC pit with Pre cast RCC (1:2:4) cover, GI funnel with mesh test point, testing & commissioning complete all as specified and directed.

Supply testing and commissioning AC three phase ,3x 240V ,50Hz, digital,electronic tamper proof energy meter of rating 10 to 60 Amps covered with PVC transparent cover with optical communication port incl taking down the unsv meter complete all as specified and directed.

Supply testing and commissioning AC single phase,50Hz, digital,electronic tamper proof energy meter of rating 5 to 30 Amps covered with PVC transparent cover with optical communication port incl taking down the unsv meter complete all as specified and directed.

HARAGOURI SUPPLIERS

R K Traders

M/s Bapujee Builders and Traders

R J ENTERPRISES

M/s MAA BHAIRABI ENTERPRISES

ABC CONSTRUCTION COMPANY

M/S. KISHAN ENGINEERING