Reconductoring of 9 Nos of 11KV lines for a distance of 62.13RKm in Ugar Sub division of Athani Division on total Turn key basis.

HUBLI ELECTRICITY SUPPLY COMPANY LIMITED

Reconductoring of 9 Nos of 11KV lines for a distance of 62.13RKm in Ugar Sub division of Athani Division on total Turn key basis.

NAME OF THE STATION 110 Ainapur 110 Ainapur 110 Ainapur 110 Ainapur 110 Ugar 33 KV Mangasuli 33KV Mangasuli 33 KV Mangasuli 110 kv Ugar

Sl. No Particulars Work Order 6 7 8 9 10 11 12 13 14

Unit F-09 Kempawad IP F-10 Basavangudi IP F-05 Jai Hanuman IP Feeder F-06 Katral F-15 Parameshwarwadi IP F-07 KODI IP Feeder F-08 Bireshwargudi IP Feeder F-10 Ganga Jamuna IP Feeder F-08 Mangasuli Old IP Feeder Total

Name of the Section Ainapur Ainapur UGAR Ainapur Ugar Ugar Ugar Ugar Ugar

Name of the Sub division UGAR UGAR UGAR UGAR UGAR UGAR UGAR UGAR Ugar

1 9 Mtr. RCC Pole 145 Kg WL Nos 4 4 10 0 5 4 5 5 5 42.00

3 PSC Pole - 8 Mtr Long, 200 Kg WL for stud Nos. 8 0 10 0 10 10 0 0 0 38.00

4 2 Pin cross for Stud Nos. 16 0 20 0 20 10 0 0 0 66.00

5 H.T X arms with HTST supports bolts & nuts etc (RCC) Set 4 4 10 0 5 4 5 5 5 42.00

6 H.T X arms with HTST supports bolts & nuts etc (PSC) Set 92 30 95 79 50 40 35 40 27 488.00

7 LT 4 Pin cross arm for PSC Set 0 0 0 0 0 10 0 0 0 10.00

8 Double pole structure complete including 5KG, 8SWG Wire for structure Grounding for 9Mtr RCC POLES Sets 2 2 4 4 3 3 1 1 1 21.00

9 11kv, 5KN polymeric Pin insulator Nos 306 100 315 277 165 132 105 135 0 1535.00

10 11kV 45 KN polymeric insulator Nos 51 36 99 50 15 18 18 21 96 404.00

11 Spiral earth electrode Nos 92 30 95 79 55 44 40 45 32 512.00

12 Guy set complete with No 15 Strain Insulator and Concreting Materails Set 15 5 15 10 5 5 5 5 5 70.00

13 Concreting of Guy sets with Boulders, Mud sand No's 15 5 15 10 5 5 0 2 5 62.00

15 PG Clamps for Rabbit No's 0 0 30 20 30 30 20 130.00

16 Caution / Danger Board Nos 96 34 105 79 0 0 0 0 0 314.00

17 Anti Climbing Divice Kg 96 34 105 79 0 0 0 0 0 314.00

18 Guarding Material (Rs.93/Mtr) including 4 Pin Cross Arm with clamps, bolts, nuts and washers for guarding. 50 mtrs Span 3 0 2 2 4 4 2 2 0 19.00

19 GOS 200A single break Nos 2 2 4 4 2 3 2 2 2 23.00

20 H - Frame Set for 11kV, 200Amps Single Break 005 Mounting - Nos 2 2 0 4 2 3 2 2 2 19.00

Decommissioning

Tender Capacity Format

Details of work Executed during last 05 years ( To asses the value of A)

Sl No Year Work Executed Other related Electrical Works if any Cost of executed work in Rs Lakhs

HT line in Rkms LT line in Rkms DTC in Nos

Details of existing commitments and on-going works to be completed during next 6 months ( To asses the value of B) Attached in the next sheet

SL No Details of On Going works Award amount Rs in Lakhs Amount of work to be completed during next "6 months" Rs in Lakhs Completion period as per award Completion period remaining

Tender Capacity Formula= A*N*1.5-B =A*1*1.5-B

Where 'N'= 01=6 months of completion period for above subject work

Seal and signature of the Bidder

A= Maximum value of Distribution network work executed in any one year during the last 5 years i.e 2020-21,2021-22,2022-23, 2023-24 & 2024-25 ( UP dated to __________________ price level) taking into account the completed as well as works in progress

N= Number of years/months prescribed for completion of the works for which Tenders are invited

B= Value,at________price level, of existing commitments and on-going works to be completed during the 'N'

Note: 1) The available tender capacity shall be more than the total tender value 2) Documentary Proof in support of value ‘A’, the Total value of works executed and payments received annually in the last 5 years shall be uploaded in the form of certificates issued by Chartered Accountant. In case if the same is not uploaded, then the maximum value of annual payments received towards the works executed which is indicated in the audited balance sheet in any one year during the last five years will be considered.

Tender Capacity Format

Details of existing commitments and on-going works to be completed during next "6 months ( To asses the value of B)

SL No Details of On Going works Award amount Rs in Lakhs Amount of work to be completed during next "6 months" Rs in Lakhs Completion period as per award Completion period remaining

Where 'N'= 1=6 months of completion period for above subject work

Note: The statement showing the value of existing commitments and ongoing works as well as the stipulated period of completion remaining for each of the works listed shall be countersigned by the Employer in charge, not below the rank of Executive Engineer or equivalent.( Note: L-1 in any of the recently called tender amount is also be considered as value of B along with the above)

Seal and signature of the Executive Engineer(Ele)