Combined package for Replacement of old 11KV MCVCB SWGs at 110KV S/s Sankeshwar AREVA, Ainapur MEGAWIN and ABB, Hidkal Dam-Sadalaga-Nippani-BHEL, Galataga(Bhoj)-CGL in Chikkodi Div. Includes supply of materials/equipment, erection, civil works, testing & commissioning on Partial Turnkey Basis.

Karnataka Power Transmission Corporation Limited

Tender Enquiry No:KPTCL/2026-27/SS/WORK_INDENT4230

Combined package for, Replacement of old 11KV MCVCB SWGs at 110KV S/s Sankeshwar AREVA, Ainapur MEGAWIN and ABB, Hidkal Dam-Sadalaga-Nippani-BHEL, Galataga(Bhoj)-CGL in Chikkodi Div. Includes supply of materials/equipment, erection, civil works, testing & commissioning on Partial Turnkey Basis. Note:11KV Switchgear will be supplied by departmentally

TECHNO - COMMERCIAL SHEETS

NOTE* For detailed scope of the work please refer Bid Documents.

BIDDERS TO READ CAREFULLY

THE FOLLOWING DOCUMENTS [DULY SIGNED BY AUTHORISED PERSON, WHEREVER NECESSARY] ARE TO BE UPLOADED IN E-PROCURMENT PORTAL AND BANK GUARANTEE TOWARDS EMD OVER AND ABOVE RS.10.00LAKH AS PER ANNEXURE-II OF THE BID DOCUMENT SHALL BE SENT IN ORIGINAL TO CHIEF ENGINEER ELECTY., (T&P), KPTCL, BENGALURU SO AS TO REACH THIS OFFICE AFTER THE LAST DATE OF SUBMISSION OF BID AND ON OR BEFORE THE DATE & TIME NOTIFIED FOR OPENING OF TECHNO COMMERCIAL BIDS FAILING WHICH THE BID WILL NOT BE OPENED. 1) NO DEVIATION CERTIFICATE (SCHEDULE-16). 2) EMD/BID SECURITY AS DETAILED IN CLAUSE NO. 13 of ITT. 3) BANK GUARANTEE TOWARDS BALANCE EMD/BID SECURITY issued either by a Nationalized/Scheduled Bank. (For the balance EMD above Rs. 10Lakhs ) (SCHEDULE-17) - as detailed in Clause No. 13 of ITT-The Bidder shall scan the Bank Guarantee towards EMD and upload the same in the prescribed format in the slot specified for “EMD and Tender Fee Payments” in the e-procurement portal to enable the owner for verification of EMD BG at the time of opening of Techno Commercial Bid, failing which the offer will be rejected 4) LETTER OF UNDERTAKING (SCHEDULE-18). 5) CONSORTIUM AGREEMENT (IF APPLICABLE-SCHEDULE-19). 6) POWER OF ATTORNEY (SCHEDULE-20). 7) ANY OTHER AGREEMENTS / UNDERTAKINGS /SELF DECLARATIONS SPECIFIED IN THE TENDER.

KARNATAKA POWER TRANSMISSION CORPORATION LIMITED

BID PROPOSAL SHEET

Tender Enquiry No:KPTCL/2026-27/SS/WORK_INDENT4230

Combined package for, Replacement of old 11KV MCVCB SWGs at 110KV S/s Sankeshwar AREVA, Ainapur MEGAWIN and ABB, Hidkal Dam-Sadalaga-Nippani-BHEL, Galataga(Bhoj)-CGL in Chikkodi Div. Includes supply of materials/equipment, erection, civil works, testing & commissioning on Partial Turnkey Basis. Note:11KV Switchgear will be supplied by departmentally

Bidder's Name & Address alongwith GSTIN no. :

Bid Proposal Reference :

Person to be contacted :

E-Mail Address:

The Chief Engineer, Electricity,

Transmission Zone, KPTCL,

Bagalkote-587103

Combined package for, Replacement of old 11KV MCVCB SWGs at 110KV S/s Sankeshwar AREVA, Ainapur MEGAWIN and ABB, Hidkal Dam-Sadalaga-Nippani-BHEL, Galataga(Bhoj)-CGL in Chikkodi Div. Includes supply of materials/equipment, erection, civil works, testing & commissioning on Partial Turnkey Basis. Note:11KV Switchgear will be supplied by departmentally

a) We have submitted bid as individual Bidder. (Indicate Name of the Individual Bidder)

b) We have uploaded bid in Consortium with the following Bidders. (Key in Consortium) - VOID Consortium/Joint Venture are not acceptable

(* Fill-up whichever is applicable)

1 We, the undersigned Bidder, having read and examined in detail the specifications and all the Bidding documents of the said work and hereby propose to design, manufacture/fabricate, shop test, supply on FOR site basis, and carry out the erection, testing and commissioning including civil, structural and architectural works for

Combined package for, Replacement of old 11KV MCVCB SWGs at 110KV S/s Sankeshwar AREVA, Ainapur MEGAWIN and ABB, Hidkal Dam-Sadalaga-Nippani-BHEL, Galataga(Bhoj)-CGL in Chikkodi Div. Includes supply of materials/equipment, erection, civil works, testing & commissioning on Partial Turnkey Basis. Note:11KV Switchgear will be supplied by departmentally

2 PRICES AND VALIDITY :

2.1 We declare that the Prices stated in our Proposal are in accordance with Clause No.40 of "Conditions of Contract (CC)" & Clause No.12 of Instruction to Tenderers (ITT) of Bid Documents. We further declare that all Ex-works price/CIF components of Spares, Maintenance and Testing Equipments and other charges viz., Frieght & Insurance Type Test charges and other charges stated in our proposal shall be as per the Tender conditions. All the Price and other terms and conditions of this Proposal are valid during the Performance of the Contract.

2.2 All Taxes and Duties, such as CGST, SGST, IGST, UTGST, Custom Duties on imports, Levies, Surcharge/Cess etc., if any, applicable on the transaction are included in the Bid Price and shall be to Our account and the Owner is not having any liability whatsoever on this account, whatever may be the contrary elsewhere in the Bid documents. However the component of Taxes & Duties included in the Bid Price are separately indicated in Schedule - 2 for TDS purpose. We further confirm that our Bid Prices as quoted in Schedule-I, include all import Duties and levies including Licence fees lawfully payable by us on imported items and all other Taxes, Duties and Levies applicable on Bought-out Components, Materials, Equipment and other items and confirm that any such Taxes, Duties and Levies additionally payable shall be to our account. We further confirm that no Sales Tax in any form shall be payable by Owner either for Bought-out items which are despatched by our Sub-Suppliers directly to the Project Site or for items Supplied directly by us.

2.3 We declare that we have noted and considered Clause No.39 of Conditions of Contract (CC ) & Clause No.11.11 of Instruction to Tenderers (ITT) of Bid Documents regarding Taxes and Duties and quoted our Prices accordingly. We further agree for TDS as per Statutory stipulations.

2.4 The Bid Prices, the Price components of the various items in our Scope of Supply, Erection including Testing & Commisisoning, Civil and Mandatory spares is quoted in Itemwise Financial Bid in e-Procurement Portal for this proposal.

3 CONSTRUCTION OF THE CONTRACT : We, declare that we are making the Offer on the basis of single Contract for the entire Scope of the Package in accordance with Clause No.26.2 of Instruction to Tenderers (ITT) of Bid Document.

4 We having studied Clause No.39 of Conditions of Contract (CC ) & Clause No.11.11 of Instruction to Tenderers (ITT) of Bid Documents , relating to Tax and we hereby, declare that if any income-tax, surcharge on income tax or any other corporate tax is attracted under the law, we agree to pay the same.

5 Bid Security/ EMD : We have enclosed a Bid Security through e-Payment mode for a sum of Rs.10.00Lakhs and remaining amount of Rs.................................................. ( above Rs.10 Lakhs) in the form of Bank Guarantee in original and two copies of the original valid for a period of 225 days from the date of opening of bids, and liable to be forfeited in accordance with Bid Documents. (Mode of Payment towards EMD is as detailed in CLAUSE NO. 13 of ITT & Clause No. 5 of NIT)

We have also ensured that the above Bid Guarantee furnished by us is in line with the Bid Documents and complete in respect of following :

1. Value of Non judicial Stamp Paper purchased in the name of executing Bank is as per Stamp Act.

2. Power of Attorney Number and Date as well as Signature and Full Name and Designation of Executant along with Bank's Stamp are there.

3. Signature, Full Name, Designation and address of Witness are there.

4. Completed Mailing address of the Head Office of the Bank is indicated.

6.1 We declare that the Works shall be performed strictly in accordance with the Specifications and Documents except for the variations and Deviations, all of which have been detailed out exhaustively in the following Schedules, irrespective of whatever has been stated to the contrary anywhere else in our Proposal.

a Commercial Deviations Schedule Schedule - 5

b Technical Deviations Schedule Schedule - 6

6.2 We further confirm that Specified Stipulation of following Clauses are acceptable to us and No Deviation / Exceptions are taken on any account whatsoever in the following Clauses.

a. Terms of payment Clause No. 37 of Section-5,Conditions of Contract (CC) and Clause No.8 of Special Conditions of Contrac (SCC)

b. EMD/Bid Security Clause No. 6, Section :1, Invitation for Tenders (IFT) and Clause No. 13, Section :2, Instruction to Tenderer (ITT)

c. Contract Performance Guarantee Clause No. 29 of Section:2, Instruction to Tenderers (ITT).

d. Penalty for delay Clause No. 41 of Section-5 : Conditions of Contract (CC).

e. Price Basis/ Price adjustment Clause No. 40 of Section-5 :Conditions of Contract (CC).

f. Defects Liability Period/Guarantee Clause No. 10 of Section-5 Special Conditions of Contract (SCC)

g. Work Schedule Clause No.17 of Section:5 Conditions of Contract (CC)

h. Taxes and Duties Clause No. 11.11 of Section-2: Instruction to Tenderers (ITT).

Further, we agree that additional conditions, if any, found in the Proposal Documents other than those stated in Deviation Schedules, save that pertaining to any rebates offered, shall not be given effect to.

7 PERFORMANCE GUARANTEE ; We declare that the ratings and performance figures of the equipment to be supplied and erected by us are guaranteed. The Guaranteed particulas of different equiment in our Scope are enclosed in Data Requirement Sheets.

8 BID PRICING : We further, declare that the Prices stated in our Proposal are in accordance with your ITT & SCC & all other relevant clauses of Bid Documents.

9 PRICE ADJUSTMENT : We declare that the Prices quoted by us are in accordance Clause No. 40 of Conditions of Contract (CC)

10 SPECIAL TOOLS AND TACKLES : We have given a list of Special Tools and Tackles in Schedule - 7 and Prices thereof are included in our lumpsum Bid Price. We further agree that any items of Special Tools and Tackles, though not included in the aforesaid list, but required for effective Erection, Testing, Commissioning & Operation of the Equipments of Substations & Transmission lines shall also be furnished by us, at no extra cost to you.

11 ADDITIONAL INFORMATION : In addition to the information called for in these Proposal Sheets, we have included with this Proposal, additional information as listed in Schedule - 8. We further confirm that such additional information does not imply any additional deviation beyond those covered in Schedule - 5 & 6 and in case of any contraction between these additional information and other provisions of Bid, the later will prevail.

12 QUALIFICATION DATA : We confirm having submitted the Qualification Data as required by you in your Bid Documents in e-Procurement Portal along with this Proposal. Further we have filled in the information for Qualification Requirements in Schedule 9. In case you require any further information in this regard, We agree to furnish the same in time.

13 WORK SCHEDULE : If this Proposal is accepted by you, we agree to submit Engineering Data, Provide Services and complete the entire Work from time to time, in accordance with Schedules indicated in the Proposal. We fully understand that the Time Schedule stipulated in this Proposal is the essence of the Contract, if awarded. The completion schedule of the various Major Key Phases of the Work is indicated in Schedule - 11.

14 CONTRACT PERFORMANCE GUARANTEE ; We further agree that if our Proposal is accepted, we shall provide an irrecoverable Contract Performance Guarantee, of value equivalent to Five percent (5%) of the Contract Price plus additional security for unbalanced tenders in accordance with Clause 29 of Instructions To Tenderers (ITT) of the tender valid up to the end of ninety (90) days after the end of the Contract guarantee Period in the form of .........................................................................................................................................................................................................................................................(Please specify the form of Guarantee) in your favour and enter into a formal agreement with you within Twenty (20) days from the date of issue of Letter of Intent to Award the Contract.

15 Consortium: (VOID) - Consortium/Joint Venture are not acceptable.

16 BID PRICE : We declare that our lumpsum Price for the entire scope of work specified in the specifications and documents, shall be as indicated in Schedule - 1.

17 CHECK LIST : We have included a Checklist duly filled in Schedule 21.

18 We, hereby, declare that only the Persons or Firms interested in this Proposal are named herein as Principals and that no other Persons are interested in the Proposal or in the Contract to be entered into, if we are awarded the Contract, and that this proposal is made without any connection with any other Person, Firm or Party likewise submitting a Proposal and that this Proposal is in all respect for and in good faith, without collusion or fraud.

19 We declare, in case our bid is accepted, that until a formal Contract is prepared & executed, this bid together with your written letter of acceptance thereof and your notification of award /Letter of Intent to Award the Contract shall constitute a binding contract between us. We further understand that you are not bound to accept the lowest or any bid you may receive.

Thanking you, we remain,

Yours faithfully,

Place Printed Name

Business Address Country of Incorporation (State or Province to be indicated)

Name and Address Principal Officer

Karnataka Power Transmission Corporation Limited

SHEET FOR TECHNO COMMERCIAL OPENING (Unpriced)

Combined package for, Replacement of old 11KV MCVCB SWGs at 110KV S/s Sankeshwar AREVA, Ainapur MEGAWIN and ABB, Hidkal Dam-Sadalaga-Nippani-BHEL, Galataga(Bhoj)-CGL in Chikkodi Div. Includes supply of materials/equipment, erection, civil works, testing & commissioning on Partial Turnkey Basis. Note:11KV Switchgear will be supplied by departmentally

Tender Enquiry No:KPTCL/2026-27/SS/WORK_INDENT4230

FILL ONLY IN LIGHT BLUE COLOURED CELLS.

Bidder's Name & Address alongwith GSTIN no. : To,

The Chief Engineer, Electy., Transmission Zone KPTCL Bagalkote-587103

We declare that in terms of Clause No. 11 of ITT and all other relevant clauses of Bid documents, the following are our Itemwise price in Rupees for the entire scope of work as specified in the Specifications and Documents. (Inclusive of all Taxes & Duties).

Lumpsum (Excluding GST): ( In Figures) Note: Fill as "YES" against this column in case Prices are indicated in figures

Lumpsum (Excluding GST): ( In Words) Note: Fill as "YES" against this column in case Prices are indicated in words

Place Designation

Name of the Company

Karnataka Power Transmission Corporation Limited

SCHEDULE - 2 (1 of 2)

SHEET FOR TECHNO COMMERCIAL OPENING (Unpriced)

Combined package for, Replacement of old 11KV MCVCB SWGs at 110KV S/s Sankeshwar AREVA, Ainapur MEGAWIN and ABB, Hidkal Dam-Sadalaga-Nippani-BHEL, Galataga(Bhoj)-CGL in Chikkodi Div. Includes supply of materials/equipment, erection, civil works, testing & commissioning on Partial Turnkey Basis. Note:11KV Switchgear will be supplied by departmentally

Tender Enquiry No:KPTCL/2026-27/SS/WORK_INDENT4230

FILL ONLY IN LIGHT BLUE COLOURED CELLS.

Summary of Price Components

Bidder's Name & Address alongwith GSTIN no. : To,

The Chief Engineer, Electy., Transmission Zone KPTCL Bagalkote-587103.

Summary price components for identified in accompanying specifications

( Name of the Work) as per the scope identified in accompanying specifications.

Sl no Description Amount in Rs. (Fill as "YES" against the above Price columns in case Prices are indicated in the Price templates)

Construction of Sub-station

A Material / Equipment Price (including Packing & Forwarding charges) in the Scope of the Contractor

Ex-works including all taxes & duties [As per schedules - 3A(i) for Station TB & 3B(i) for Line]

B Supply portion total FORD price [A+B]

C Erection portion:

i) Total charges for Erection, Testing & Commissioning of all Supply items [as per schedules-3A(ii) for Station TB, 3B(ii) for Line]

ii) Total charges for entire civil works [ as per Schedules-3C(i) for Station TB and 3C(ii) for Line]

iii) Total civil works, erection, Testing and commisioning charges (i)+(ii)

D Total Bid Price = C+D(iii) In figures : Rs.

Total Bid Price in Figures : Rs.

Total Bid Price in words : Rupees

Note: The erection charges shall include the charges for taking delivery at Owner's store, unloading, handling, storage, erection, testing and commissioning of all equipments.

Place Designation

Name of the Company

Karnataka Power Transmission Corporation Limited

SCHEDULE - 2 ( 2 of 2 ) - TAXES, DUTIES & OTHER LEVIES

SHEET FOR TECHNO COMMERCIAL OPENING (Unpriced)

Combined package for, Replacement of old 11KV MCVCB SWGs at 110KV S/s Sankeshwar AREVA, Ainapur MEGAWIN and ABB, Hidkal Dam-Sadalaga-Nippani-BHEL, Galataga(Bhoj)-CGL in Chikkodi Div. Includes supply of materials/equipment, erection, civil works, testing & commissioning on Partial Turnkey Basis. Note:11KV Switchgear will be supplied by departmentally

Tender Enquiry No:KPTCL/2026-27/SS/WORK_INDENT4230

Fill IN LIGHT BLUE COLOURED CELLS.

Bidder's Name & Address alongwith GSTIN no. : To,

The Chief Engineer, Electy., Transmission Zone KPTCL Bagalkote-587103.

Estimates of Indian Taxes, Duties and Levies included in the Total Bid Price are as follows:

SL. No. Description of Applicable Tax / Duty / Levy Construction of Sub-station

Rate of Tax / Duty / Levy Amount of Taxes / Duties in Rupees (Fill in as 'YES' in case Prices are indicated in the Lumpsum Bid Financial Offer) Rate of Tax / Duty / Levy Amount of Taxes / Duties in Rupees (Fill in as 'YES' in case Prices are indicated in the Lumpsum Bid Financial Offer)

1 SGST/UTGST Applicable taxes, duties & levies prevailing as on the last date of bid submission shall be quoted

i. Supply Portion

ii. Erection Portion

iii. Civil Portion

i. Supply Portion

ii. Erection Portion

iii. Civil Portion

i. Supply Portion

ii. Erection Portion

iii. Civil Portion

6 Building and other construction workers welfare Cess for Supply, Erection and Civil Portion works

8 a. Applicable Customs Duty (*) (Bidders shall also clearly indicate the breakup of Customs duty such as BCD, Cess,etc.,)

b. If there is any existing Treaty between India and the country from where the goods required for this project are proposed to be imported, then copy of the treaty shall be uploaded.

9 Other Taxes & duties if any (Specify) **

10 Other Taxes & duties if any (Specify) **

11 Total (Sum of 1 to 10)

(*) In case of CIF portion of Supply.

** Please Specify the nature of the other Taxes alongwith the details in the "Rate" Column.

Place Designation

Name of the Company

Karnataka Power Transmission Corporation Limited

SCHEDULE - 2A : SCHEDULE OF DISCOUNT

SHEET FOR TECHNOCOMMERCIAL OPENING (UN - PRICED)

Combined package for, Replacement of old 11KV MCVCB SWGs at 110KV S/s Sankeshwar AREVA, Ainapur MEGAWIN and ABB, Hidkal Dam-Sadalaga-Nippani-BHEL, Galataga(Bhoj)-CGL in Chikkodi Div. Includes supply of materials/equipment, erection, civil works, testing & commissioning on Partial Turnkey Basis. Note:11KV Switchgear will be supplied by departmentally

Tender Enquiry No:KPTCL/2026-27/SS/WORK_INDENT4230

FILL ONLY IN LIGHT BLUE COLOURED CELLS. Fill as "YES" against Price columns in case Prices are indicated in the Item-Wise Bid Financial Offer

Bidder's Name & Address alongwith GSTIN no. : To,

The Chief Engineer, Electricity, Transmission Zone KPTCL Bagalkote-587103.

We hereby offer an unconditional discount on our quoted price in Schedule 2 (1 of2) as under. Any discounts offered anywere else in Bid shall not be considered.

Sl.No Nature of Discount Construction of Sub-station

Percentage of discount Amount (in Rs.) (Fill in as 'YES' in case Prices are indicated in the Lumpsum Bid Financial Offer excluding GST) Remarks

I Supply Schedules Ex-works prices

II Erection Schedules

III Civil Works Schedules

Place Designation

Name of the Company

Karnataka Power Transmission Corporation Limited

SHEET FOR TECHNOCOMMERCIAL OPENING

Tender Enquiry No:KPTCL/2026-27/SS/WORK_INDENT4230

Combined package for, Replacement of old 11KV MCVCB SWGs at 110KV S/s Sankeshwar AREVA, Ainapur MEGAWIN and ABB, Hidkal Dam-Sadalaga-Nippani-BHEL, Galataga(Bhoj)-CGL in Chikkodi Div. Includes supply of materials/equipment, erection, civil works, testing & commissioning on Partial Turnkey Basis. Note:11KV Switchgear will be supplied by departmentally

Details of payments made in the form of Credit card/Debit card/NEFT/RTGS/OTC (over the counter) as per the tender conditions should be keyed in against column no. 3 (a) . BG Amount, BG No. and date, Name and address of the bank issuing the BG, validity of the BG should be keyed in against column no. 3 (b) .

FILL ONLY IN LIGHT BLUE COLOURED CELLS.

Bidder's Name & Address alongwith GSTIN no. : To,

The Chief Engineer, Electy., Transmission Zone KPTCL Bagalkote-587103.

STATEMENT OF COMMERCIAL TERMS AND CONDITIONS

Sl. No. Particulars Details

1 Bid proposal form uploaded

2 No deviation certificate uploaded

3. a) EMD / Bid Security Bids shall be accompanied by bid security (EMD); 1) Up to Rs.10Lakh The following modes of payment will be provided as a part of e-Payment services. • Credit Card/Debit Card • Net Banking • NEFT/RTGS • Over-the-Counter (OTC) • IMPS For further detail regarding mode of e-payment of EMD in e-procurement platform, contact e-procurement cell, Government of Karnataka.

b) EMD amount above Rs.10Lakh by Bank Guarantee

4 Validity of the Bid.

5 Qualifying Requirements.

6 Financial capability

8 Taxes & Duties.

9 Completion Schedule

10 Defects Liability Period/Guarantee

11 Payment Terms

Place Designation

Name of the Company

Karnataka Power Transmission Corporation Limited

SCHEDULE - 3A(i) - Sub-station Supply and Erection portion

SHEET FOR TECHNO COMMERCIAL OPENING (Unpriced)

Tender Enquiry No:KPTCL/2026-27/SS/WORK_INDENT4230

Combined package for, Replacement of old 11KV MCVCB SWGs at 110KV S/s Sankeshwar AREVA, Ainapur MEGAWIN and ABB, Hidkal Dam-Sadalaga-Nippani-BHEL, Galataga(Bhoj)-CGL in Chikkodi Div. Includes supply of materials/equipment, erection, civil works, testing & commissioning on Partial Turnkey Basis. Note:11KV Switchgear will be supplied by departmentally

Bidder's Name & Address alongwith GSTIN no. :

The Chief Engineer, Electricity, Transmission Zone KPTCL Bagalkote-587103.

BIDDERS SHALL FILL ONLY IN THE LIGHT BLUE COLOURED CELLS.

BIDDERS SHALL NOTE: 1) PLEASE FILL ONLY IN THE LIGHT BLUE COLOURED CELLS. 2) Testing & Commissioning of the complete Sub-Station/Terminal Bay and Transmission line is in the scope of contractor. 3) All the Equipments / Meters Proposed for this Station should be SCADA & Station Automation Operational and the Energy meters should be of 0.2s accuracy class with ABT & TOD features & DLMS compliant.

Sl. No. Particulars Unit Qty Indicate whether "Own manufactured Iem" or "Bought Out Item" Indicate country of Origin

110KV Sankeshwar 110KV Ainapur 110KV H.Dam 110KV Sadalaga 110KV Nippani 110KV Galataga (Bhoj) Total

A1 a)11 KV MCVCB,350 MVA ,20KA,1250A incomer 800A feeder outdoor switchgear comprising of 1 I/C+5F+1CB+1AP with annuciation panel Set 1 1 KPTCL supply

11kV MCVCB, 500MVA, 25 kA, 1600A incomer 1250A feeder (SCADA compatible) MCVCB Switchgear set comprising of 1IC+5F+1 AP Set 1 1 KPTCL supply

11 KV MCVCB,350 MVA ,20KA,1250A incomer, 800A feeder outdoor switchgear comprising of 1/C+6F+1CB +1AP with Bank CT Ratio 1200-800 / 1-1-1A Set 1 1 KPTCL supply

11kV MCVCB, 350MVA, 25 kA, 1250A incomer 800A feeder (SCADA compatible) MCVCB Switchgear set comprising of 2IC+10F+1BC+2AP Set 1 1 KPTCL supply

11 kV MCVCB, 350 MVA, 25 kA, 1250 A incomer (SCADA compatible) MCVCB Switchgear set comprising of 2IC+10F+1BC+1AP Set 1 1 KPTCL supply

11 kV PCVCB, 350 MVA, 25 kA, 1250 A incomer 800A feeder (SCADA compatible) Switchgear set comprising of 2IC+10F+2CB+1AP3 (As per IEEMA 4th Qtr 2025-26, Pg.No.12,Sl.No.218,219,220 & Pg.No.13, Sl.No.252) Set 1 1 KPTCL supply

11 kV MCVCB, 500MVA, 25 kA, 1600A incomer 1250A feeder (SCADA compatible) MCVCB Switchgear set comprising of 2IC+8F+1BC+1AP Set 1 1 KPTCL supply

A2 Capacitor Bank : Design, Engineering, supply, erection, testing & commissioning of 2.9 MVAR, 12.1 kV Capacitor Bank, star connected, Double Bank with internal fuses, terminal connectors with suitable neutral CT and station class LAs, 0.2% series reactor on neutral side with mounting structures for NCT, Capacitor Bank, station class LAs, Series reactor etc,. complete as per specification Set 1 1 2

A3 3x240 SQ mmXLPE Cable (with armour) Mtrs 40 80 120

11KV XLPE UG Cable termination kit (Heat Shrinkable type) as per specifications. 0

i) 3x240 Sqmm indoor No 1 2 3

ii) 3x240 Sqmm outdoor No 1 2 3

A4 Copper Control Cables: 1.1 KV PVC insulated Copper Control Cable with Lugs/Ferrules 0

iii)2C x 6 Sqmm Mtrs 120 25 243 388

iv) 4C x 16 Sqmm Mtrs 30 30

v) 4C x 2.5 Sqmm Mtrs 120 120

A5 1 X 1000 Sqmm UG Cable, Heat shrinkable cable termination kit for XLPE ( Indoor ) No 8 8 16

1 X 1000 Sqmm UG Cable, Heat shrinkable cable termination kit for XLPE ( Outdoor ) No 8 8

3 X 240 Sqmm UG Cable, Heat shrinkable cable termination kit for XLPE ( Indoor ) No 10 10 20

3 X 240 Sqmm UG Cable, Heat shrinkable cable termination kit for XLPE ( Outoor ) No 10 10

A6 AC Distribution Box Single front (Outdoor type) 6 Terminal, 1200x1350x300mm, 1 I/C of 100A MCCB 20kA + 6 O/G MCB 16A + 1 O/G of 100A, HRC fuse, complete as per KPTCL SR 23/Pg.No.39/Item No>11.2.1 & Pg.No:121, ItemNo.23h) No 1 1 1 1 4

A7 DC Distribution Panel (Indoor) as per technical specification comprising of earth fault indicator, indication circuit for AC mains failure, 1 no. 100A SFU for I/C + 12 nos. 32A SFU for O/G, complete as per KPTCL SR 23/Pg.No.39/Item No>11.2.3 & Pg.No:121, ItemNo.23h) No 1 1 1 2 5

A8 A) LTAC Panel (Indoor) : LTAC Panel 415V as per technical specification comprising of Voltmeter, Ammeter & 1No. ETV meter. 1No. I/C MCCB 200A + 2Nos 3 Phase, 63A OG HRC fuse + 2Nos 3 Phase 32 A OG HRC fuse + 6Nos 3Phase, 16A HRC fuse etc, complete. KPTCL SR-23/PG NO 39/ITEM NO 11.2.2 No 1 1

A9 iii) Supplying and erection of D.P.Structures with all accessories using 9 Mtrs. Long , 145 Kgs. WL,RCC poles including H frame suitable for mounting roaster GOS with provision for fixing 9KV lighting arrestor etc. complete (for auxiliary transformer & capacitor bank) Set 1 2 3

A10 11KV Gos Single Break 400A Set 1 1 2

11KV 90 KN Disc Insulators No 12 12

Bolted type tension clamp to suit Coyote ACSR No's 6 6

A11 Coyote conductor Mtr 30 30 400 460

BUS formation of Coyote for 100KVA aux tfr Bay 1 1

C type Wedge connector suitable for Drake -Coyote for existing 11KV ODS bus jumps No 45 45

C type Wedge connector suitable for Coyote -Coyote for existing 11KV ODS bus jumps and PCVCB Overhead bus No 75 75

C type Wedge connector suitable for Drake -Drake for existing 11KV ODS bus jumps and 110KV Bus No 50 50

A12 Grounding of equipment with 50 x 6 mm G.I. Flat and connecting equipment to the earthmat/ground pit. Each point of earthing with all formation works like bending, twisting, drilling of holes and connecting by welding (inclusive of all T&P and consumables) to the earthmat/ground pit/point of earth connection, all the materials supplied by the contractor . (KPTCL SR 2023-24 Pg No 123 SL No: 26 (f)) Mtrs 40 400 40 250 50 780

A13 Grounding of equipment by providing cast iron pipe of 100 mm ID 13 mm thickness, 2.75 metre long with 2 part clamp out of G.I. Flat 50 X 6 mm continuously welded alround the pipe using cast iron welding electrodes as per drawing including the cost of excavation (All materials to be supplied by the contractor) KPTCL SR 2023-24 Pg No 115 SL No: 6 (c) Set 3 2 5

A14 Supplying & providing 450 mm dia 450 mm height 1.5" to 2" thick hume pipe collar (non pressure type) for earth pits including all lead and lifts etc. (KPTCL SR 2023-24 Pg No 124 SL No: 26 (i)) No. 3 2 5

A15 Earth Bonds for 11KV DP sets L/s 0 1 1

A16 Fabrication works on existing switchgears plinth viz welding,cutting providing angles etc L/S 1 1 1 3

Dismantling Portion

1 Releasing of 11kV Switchgears along with control desk Nos 7 19 8 16 17 14 81

2 Loading of released 11KV Switchgears at 110 Kvsub-station. As per 132KV SR Labour Sl.no:2(i) Mt 3 7.6 3 6.4 6.6 5.6 32.2

3 Un Loading of released 11KV Switchgears at 110 Kvsub-station. As per 132KV SR Labour Sl.no:2(i) Mt 3 7.6 3 6.4 6.6 5.6 32.2

4 Transportation of released materials from substation to M W Store Belagavi using 10 MT Lorry [As per 132KV SR Labour Sl.no:1(A)(i)] km 250 750 250 500 250 582 2582

NOTE 1. Any clarifications / hard copy of drawings can be obtained from the office of the Chief Engineer Electricity, Transmission Zone, KPTCL, Bagalkote.

2. Spacers shall be provided wherever necessary and no extra charges is payable on account of the same.

3. Supply of equipment/materials and the Erection charges shall include loading and unloading.

4. Copper Flat and GI Flat required for Power Transformers (if supply is in Bidder's scope) shall be supplied alongwith the Transformers and no extra cost is payable on this account.

5. The Bidder shall take necessary action to ensure that all the materials supplied shall be properly housed to ensure satisfactory commissioning.

6. The bidder shall quote same rates for common materials in all the Lumpsump Financial Bid Offer.

7. Released materials shall be transported to the nearest Major Works Store of KPTCL without any additional cost as per the directions of the Engineer in charge of the work.

8. The Bidder shall clearly indicate whether the materials/equipments are “Own manufactured” or “Bought out item”.

9. KPTCL may supply the available store stock materials and same will be descoped from the bidder's scope of supply.

Place Designation

Name of the Company

Karnataka Power Transmission Corporation Limited

SCHEDULE - 3A(i) - Sub-station Supply and Erection portion

SHEET FOR TECHNO COMMERCIAL OPENING (Unpriced)

Tender Enquiry No:KPTCL/2026-27/SS/WORK_INDENT4230

Combined package for, Replacement of old 11KV MCVCB SWGs at 110KV S/s Sankeshwar AREVA, Ainapur MEGAWIN and ABB, Hidkal Dam-Sadalaga-Nippani-BHEL, Galataga(Bhoj)-CGL in Chikkodi Div. Includes supply of materials/equipment, erection, civil works, testing & commissioning on Partial Turnkey Basis. Note:11KV Switchgear will be supplied by departmentally

Bidder's Name & Address alongwith GSTIN no. :

The Chief Engineer, Electricity, Transmission Zone KPTCL Bagalkote-587103.

BIDDERS SHALL FILL ONLY IN THE LIGHT BLUE COLOURED CELLS.

BIDDERS SHALL NOTE: 1) PLEASE FILL ONLY IN THE LIGHT BLUE COLOURED CELLS. 2) Testing & Commissioning of the complete Sub-Station/Terminal Bay and Transmission line is in the scope of contractor. 3) All the Equipments / Meters Proposed for this Station should be SCADA & Station Automation Operational and the Energy meters should be of 0.2s accuracy class with ABT & TOD features & DLMS compliant.

Sl. No. Particulars Unit Qty Indicate whether "Own manufactured Iem" or "Bought Out Item" Indicate country of Origin

110KV Sankeshwar 110KV Ainapur 110KV H.Dam 110KV Sadalaga 110KV Nippani 110KV Galataga (Bhoj) Total

A1 a)11 KV MCVCB,350 MVA ,20KA,1250A incomer 800A feeder outdoor switchgear comprising of 1 I/C+5F+1CB+1AP with annuciation panel Set 1 1

11kV MCVCB, 500MVA, 25 kA, 1600A incomer 1250A feeder (SCADA compatible) MCVCB Switchgear set comprising of 1IC+5F+1 AP Set 1 1

11 KV MCVCB,350 MVA ,20KA,1250A incomer, 800A feeder outdoor switchgear comprising of 1/C+6F+1CB +1AP with Bank CT Ratio 1200-800 / 1-1-1A Set 1 1

11kV MCVCB, 350MVA, 25 kA, 1250A incomer 800A feeder (SCADA compatible) MCVCB Switchgear set comprising of 2IC+10F+1BC+2AP Set 1 1

11 kV MCVCB, 350 MVA, 25 kA, 1250 A incomer (SCADA compatible) MCVCB Switchgear set comprising of 2IC+10F+1BC+1AP Set 1 1

11 kV PCVCB, 350 MVA, 25 kA, 1250 A incomer 800A feeder (SCADA compatible) Switchgear set comprising of 2IC+10F+2CB+1AP3 (As per IEEMA 4th Qtr 2025-26, Pg.No.12,Sl.No.218,219,220 & Pg.No.13, Sl.No.252) Set 1 1

11 kV MCVCB, 500MVA, 25 kA, 1600A incomer 1250A feeder (SCADA compatible) MCVCB Switchgear set comprising of 2IC+8F+1BC+1AP Set 1 1

A2 Capacitor Bank : Design, Engineering, supply, erection, testing & commissioning of 2.9 MVAR, 12.1 kV Capacitor Bank, star connected, Double Bank with internal fuses, terminal connectors with suitable neutral CT and station class LAs, 0.2% series reactor on neutral side with mounting structures for NCT, Capacitor Bank, station class LAs, Series reactor etc,. complete as per specification Set 1 1 2

A3 3x240 SQ mmXLPE Cable (with armour) Mtrs 40 80 120

11KV XLPE UG Cable termination kit (Heat Shrinkable type) as per specifications. 0

i) 3x240 Sqmm indoor No 1 2 3

ii) 3x240 Sqmm outdoor No 1 2 3

A4 Copper Control Cables: 1.1 KV PVC insulated Copper Control Cable with Lugs/Ferrules 0

iii)2C x 6 Sqmm Mtrs 120 25 243 388

iv) 4C x 16 Sqmm Mtrs 30 30

v) 4C x 2.5 Sqmm Mtrs 120 120

A5 1 X 1000 Sqmm UG Cable, Heat shrinkable cable termination kit for XLPE ( Indoor ) No 8 8 16

1 X 1000 Sqmm UG Cable, Heat shrinkable cable termination kit for XLPE ( Outdoor ) No 8 8

3 X 240 Sqmm UG Cable, Heat shrinkable cable termination kit for XLPE ( Indoor ) No 10 10 20

3 X 240 Sqmm UG Cable, Heat shrinkable cable termination kit for XLPE ( Outoor ) No 10 10

A6 AC Distribution Box Single front (Outdoor type) 6 Terminal, 1200x1350x300mm, 1 I/C of 100A MCCB 20kA + 6 O/G MCB 16A + 1 O/G of 100A, HRC fuse, complete as per KPTCL SR 23/Pg.No.39/Item No>11.2.1 & Pg.No:121, ItemNo.23h) No 1 1 1 1 4

A7 DC Distribution Panel (Indoor) as per technical specification comprising of earth fault indicator, indication circuit for AC mains failure, 1 no. 100A SFU for I/C + 12 nos. 32A SFU for O/G, complete as per KPTCL SR 23/Pg.No.39/Item No>11.2.3 & Pg.No:121, ItemNo.23h) No 1 1 1 2 5

A8 A) LTAC Panel (Indoor) : LTAC Panel 415V as per technical specification comprising of Voltmeter, Ammeter & 1No. ETV meter. 1No. I/C MCCB 200A + 2Nos 3 Phase, 63A OG HRC fuse + 2Nos 3 Phase 32 A OG HRC fuse + 6Nos 3Phase, 16A HRC fuse etc, complete. KPTCL SR-23/PG NO 39/ITEM NO 11.2.2 No 1 1

A9 iii) Supplying and erection of D.P.Structures with all accessories using 9 Mtrs. Long , 145 Kgs. WL,RCC poles including H frame suitable for mounting roaster GOS with provision for fixing 9KV lighting arrestor etc. complete (for auxiliary transformer & capacitor bank) Set 1 2 3

A10 11KV Gos Single Break 400A Set 1 1 2

11KV 90 KN Disc Insulators No 12 12

Bolted type tension clamp to suit Coyote ACSR No's 6 6

A11 Coyote conductor Mtr 30 30 400 460

BUS formation of Coyote for 100KVA aux tfr Bay 1 1

C type Wedge connector suitable for Drake -Coyote for existing 11KV ODS bus jumps No 45 45

C type Wedge connector suitable for Coyote -Coyote for existing 11KV ODS bus jumps and PCVCB Overhead bus No 75 75

C type Wedge connector suitable for Drake -Drake for existing 11KV ODS bus jumps and 110KV Bus No 50 50

A12 Grounding of equipment with 50 x 6 mm G.I. Flat and connecting equipment to the earthmat/ground pit. Each point of earthing with all formation works like bending, twisting, drilling of holes and connecting by welding (inclusive of all T&P and consumables) to the earthmat/ground pit/point of earth connection, all the materials supplied by the contractor . (KPTCL SR 2023-24 Pg No 123 SL No: 26 (f)) Mtrs 40 400 40 250 50 780

A13 Grounding of equipment by providing cast iron pipe of 100 mm ID 13 mm thickness, 2.75 metre long with 2 part clamp out of G.I. Flat 50 X 6 mm continuously welded alround the pipe using cast iron welding electrodes as per drawing including the cost of excavation (All materials to be supplied by the contractor) KPTCL SR 2023-24 Pg No 115 SL No: 6 (c) Set 3 2 5

A14 Supplying & providing 450 mm dia 450 mm height 1.5" to 2" thick hume pipe collar (non pressure type) for earth pits including all lead and lifts etc. (KPTCL SR 2023-24 Pg No 124 SL No: 26 (i)) No. 3 2 5

A15 Earth Bonds for 11KV DP sets L/s 0 1 1

A16 Fabrication works on existing switchgears plinth viz welding,cutting providing angles etc L/S 1 1 1 3

Dismantling Portion

1 Releasing of 11kV Switchgears along with control desk Nos 7 19 8 16 17 14 81

2 Loading of released 11KV Switchgears at 110 Kvsub-station. As per 132KV SR Labour Sl.no:2(i) Mt 3 7.6 3 6.4 6.6 5.6 32.2

3 Un Loading of released 11KV Switchgears at 110 Kvsub-station. As per 132KV SR Labour Sl.no:2(i) Mt 3 7.6 3 6.4 6.6 5.6 32.2

4 Transportation of released materials from substation to M W Store Belagavi using 10 MT Lorry [As per 132KV SR Labour Sl.no:1(A)(i)] km 250 750 250 500 250 582 2582

NOTE 1. Any clarifications / hard copy of drawings can be obtained from the office of the Chief Engineer Electricity, Transmission Zone, KPTCL, Bagalkote.

2. Spacers shall be provided wherever necessary and no extra charges is payable on account of the same.

3. Supply of equipment/materials and the Erection charges shall include loading and unloading.

4. Copper Flat and GI Flat required for Power Transformers (if supply is in Bidder's scope) shall be supplied alongwith the Transformers and no extra cost is payable on this account.

5. The Bidder shall take necessary action to ensure that all the materials supplied shall be properly housed to ensure satisfactory commissioning.

6. The bidder shall quote same rates for common materials in all the Lumpsump Financial Bid Offer.

7. Released materials shall be transported to the nearest Major Works Store of KPTCL without any additional cost as per the directions of the Engineer in charge of the work.

8. The Bidder shall clearly indicate whether the materials/equipments are “Own manufactured” or “Bought out item”.

9. KPTCL may supply the available store stock materials and same will be descoped from the bidder's scope of supply.

Place Designation

Name of the Company

Karnataka Power Transmission Corporation Limited

SCHEDULE - 3C(i) - Civil Works PORTION for Sub-station

SHEET FOR TECHNO COMMERCIAL OPENING (Unpriced)

Tender Enquiry No:KPTCL/2026-27/SS/WORK_INDENT4230

Combined package for, Replacement of old 11KV MCVCB SWGs at 110KV S/s Sankeshwar AREVA, Ainapur MEGAWIN and ABB, Hidkal Dam-Sadalaga-Nippani-BHEL, Galataga(Bhoj)-CGL in Chikkodi Div. Includes supply of materials/equipment, erection, civil works, testing & commissioning on Partial Turnkey Basis. Note:11KV Switchgear will be supplied by departmentally

BIDDERS SHALL NOTE: FILL ONLY IN LIGHT BLUE COLOURED CELLS

Bidders Name and Address along with GSTIN No.: To,

The Chief Engineer, Electricity, Transmission Zone KPTCL Bagalkote-587103.

Sl. No. Item Description Unit Qty Remarks

110KV Sankeshwar 110KV Ainapur 110KV H.Dam 110KV Sadalaga 110KV Nippani 110KV Galataga (Bhoj) Total

B1 Earth work excavation for Foundation by mechanical means for all works & depth upto 3 m, as per drawing and technical specifications, including setting out, shoring, strutting, barricading, caution lights, including dressing of excavated surfaces, disposing off or levelling the excavated earth or sorting & stacking the selected earth for reuse in a radius of 50 m and lift upto 1.5 m including cost of labour, tools, usage of machinery & other appurtenaces required to complete the work (V1/Pg8/1.15.1) In ordinary/soft rock without blasting upto 1.5 m depth cmt 16.46 0 32.12 0 0 0 48.58

11KV 2.9 MV AR capacitor bank -4.4

9/9.5M RCC pole - 1.26

3X240Sqmm UG cable excavation - 10.8

B2 Earth work excavation for Foundation by mechanical means for all works & depth upto 3 m, as per drawing and technical specifications, including setting out, shoring, strutting, barricading, caution lights, including dressing of excavated surfaces, disposing off or levelling the excavated earth or sorting & stacking the selected earth for reuse in a radius of 50 m and lift upto 1.5 m including cost of labour, tools, usage of machinery & other appurtenaces required to complete the work (V1/Pg8/1.15.1) In ordinary/soft rock Depth exceeding 1.5 m, but not exceeding 3 m cmt 0.08 0 0.16 0 0 0 0.24

9/9.5M RCC pole - 0.08

B3 Providing and laying in position Cement Concrete for levelling course for all works in foundation. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed, laid in layers not exceeding 150 mm thickness, well compacted using plate vibrators, including all lead & lifts, cost of all materials of quality, labour, Usage charges of machinery, curing, and all the other appurtenances required to complete the work as per technical specifications. Mix 1:4:8 Using 40 mm nominal size graded crushed coarse aggregates (V1/Pg15/2.1.2) cmt 0.48 0 0.56 0 0 0 1.04

11KV 2.9 MV AR capacitor bank -0.4

9/9.5M RCC pole - 0.080

B4 Providing and laying in position Cement Concrete for all Foundation works. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with super plasticizers laid in finished layers, well compacted using needle vibrators, including all lead & lifts, cost of all materials, quality confirming to the requirements of relevant IS codes, labour, Usage charges of machinery, curing, form work, centering & scaffolding and all the other appurtenances required to complete the work as per technical specifications (V1/Pg15/2.2.1) M20 Design Mix Using 20 mm nominal size graded crushed coarse aggregates For foundation add at 3% cmt 3.34 0 4.48 0 0 0 7.82

11KV 2.9 MV AR capacitor bank- 2.2

9/9.5M RCC pole - 1.140

B5 Filling available excavated earth (excluding rock) in trenches, plinth, sides of foundations and other similar works etc. in layers not exceeding 20cm in depth, consolidating each deposited layer by ramming and watering, lead up to 50 m and lift upto 1.5 m. (V1/Pg7/1.9) CMT 4.8125 0 7.7625 0 0 0 12.575

11KV 2.9 MV AR capacitor bank -2.6

3X240Sqmm UG cable excavation - 2.213

B6 Steel Fabrication: Supplying, fitting and placing TMT FE 550 / 550D Steel Reinforcement including cost of all materials, machinery, labour, cleaning, straightening, cutting, bending, hooking, laping/welding joints, tying with binding wire / soft annealed steel wire and other ancilary operations complete as per drawing and technical specification All other type of structures (V1/Pg18/2.11h) kg 149.616 0 190.576 0 0 0 340.192

11KV 2.9 MV AR capacitor bank -108.656

9/9.5M RCC pole - 40.96

Excavation: Earth work excavation for foundation & removing the excavated earth to a distance of not exceeding 50m & with a lift up to 1.5m in soft rock without blasting. SR 18-19 P NO 6/2.6 Cum 75.8 75.8

B8 Providing and laying granite or basalt or trap jelly concrete using 40mm and down size jelly for foundation laid in 15cms thick layers and well compacted including curing etc., complete in CC 1:4:8. Bed concrete Cum 15.4 15.4

B9 Providing and constructing granite or basalt/trap size stone masonry hammer dressed in course not less than 20cms. High with bond stones at 2mtrs interval inlcluding curing etc., complete as per specification for foundation and basement in CM 1:6. Cum 73.7 73.7

B10 Plastering to stone masonry in C.M. 1:4, 20mm thick including providing & removing scaffolding rounding of all corners wherever required smooth rendering curing etc., complete. Sq.m 48.6 48.6

B11 Cement pointing to stone masonry inlcluding scaffolding, racking, out joints curing etc., complete in CM 1:3 Sq.m 34.8 34.8

B12 Providing & laying CC for RCC column using clean granite or trap jelly 20mm & down size with steel or plywood or plank centering & shuttering form work including machine mixing, laying vibrating & finishing nicely with C.M. (1:3) including curing etc., complete (exclusive of cost of steel & fabrication charges) in CC 1:1 1/2 :3 (19/7-7.2) Cum 10.7 10.7

B13 Dismantling of existing structures like culverts,bridges, retaining walls and other structure comprising of masonry, cement concrete, wood work, steel work, including T&P and scaffolding wherever necessary, sorting the dismantled material, disposal of unserviceable material and stacking the serviceable material with all lifts complete as B. Rubble stone masonry in cement mortar Cum 37.33 37.33

B14 Outdoor ACDB

Excavation : 1.00X1.00X1.10x3Legs = 3.30 Cmt

NS : 0.9X0.9X1X2Legs = 0.162 Cmt Cmt 0.162 0.162

DFR Soil : - 0.9X0.9X1X2Legs = 0.162 Cmt Cmt 0.162 0.162

HR : - 0.9X0.9X0.9x2Legs= 0.30 Cmt Cmt 1.458 1.458

Column :- 0.6x0.3x1.1x2 = 0.396 cmt

Pad ;- 10 mm steel, 200 mm C/C Bothways

Total 10 mm steel

9.6 mtrs x 0.6 = 5.76 kgs

Col 12mm :- 1.2 x 4.0 x 2 = 9.6 mtrs

Total 12 mm steel

9.6 mtrs x 0.9 = 8.64 kgs

Striups 8 mm dia 250 C/C

Backfilling with Available Earth :- cmt 0.21 0.21

1) The land will be handed over " As is where is condition".

Place Designation

Name of the company

KARNATAKA POWER TRANSMISSION CORPORATION LIMITED

SCHEDULE-5 COMMERCIAL DEVIATION

SHEET FOR TECHNOCOMMERCIAL OPENING

Tender Enquiry No:KPTCL/2026-27/SS/WORK_INDENT4230

Combined package for, Replacement of old 11KV MCVCB SWGs at 110KV S/s Sankeshwar AREVA, Ainapur MEGAWIN and ABB, Hidkal Dam-Sadalaga-Nippani-BHEL, Galataga(Bhoj)-CGL in Chikkodi Div. Includes supply of materials/equipment, erection, civil works, testing & commissioning on Partial Turnkey Basis. Note:11KV Switchgear will be supplied by departmentally

Please fill Only in the Light Blue Couloured Cell.

Please key in the SlNo.,Section , Clause , Description as given in bid sheets and finally your Statement of Deviation/Variations.

This Sheet would be opened at the Techno-Commercial Opening. Please refer Vendor Manual attached for further details.

For any further assistance for submitting your bids please call up KPTCL Office.

We agree to provide all original Documents in support of the information provided for verification upon request. (Key in as YES in the space provided)

We understand that the electonic bid submitted by us is a valid offer in accordance with IT Act. (Key in as YES in the space provided)

We are fully aware of the electronic bid formalities and abide by the same. (Key in as YES in the space provided)

If you are not deviating from any of the clauses mentioned please key in as 'NO DEVIATION' in the space provided.

Bidder's Name & Address alongwith GSTIN no. :

TO, The Chief Engineer, Electricity, Transmission Zone KPTCL Bagalkote-587103.

I/we have read each of the Clauses mentioned in INVITATION FOR TENDERS , INSTRUCTION TO TENDERERS , CONDITIONS OF CONTRACT, SPECIAL CONDITIONS OF CONTRACT and COMMERCIAL TERMS AND CONDITIONS and all the sections of Bid documents.

The following are the commercial Deviations and Variations from and exceptions to the Specifications and documents for

Combined package for, Replacement of old 11KV MCVCB SWGs at 110KV S/s Sankeshwar AREVA, Ainapur MEGAWIN and ABB, Hidkal Dam-Sadalaga-Nippani-BHEL, Galataga(Bhoj)-CGL in Chikkodi Div. Includes supply of materials/equipment, erection, civil works, testing & commissioning on Partial Turnkey Basis. Note:11KV Switchgear will be supplied by departmentally

These deviations and variations are exhaustive. Except these deviations, the entire work shall be performed as per your specifications and documents.

Sl. NO. SECTION CLAUSE NO. DESC. AS PER SPECIFICATION STATEMENT OF DEVIATIONS/VARIATIONS

Note : Deviations specified elsewhere in the specification will not be considered.

Place Designation

Name of the company

KARNATAKA POWER TRANSMISSION CORPORATION LIMITED

SCHEDULE-6 : TECHNICAL DEVIATION

SHEET FOR TECHNO-COMMERCIAL OPENING

Tender Enquiry No:KPTCL/2026-27/SS/WORK_INDENT4230

Combined package for, Replacement of old 11KV MCVCB SWGs at 110KV S/s Sankeshwar AREVA, Ainapur MEGAWIN and ABB, Hidkal Dam-Sadalaga-Nippani-BHEL, Galataga(Bhoj)-CGL in Chikkodi Div. Includes supply of materials/equipment, erection, civil works, testing & commissioning on Partial Turnkey Basis. Note:11KV Switchgear will be supplied by departmentally

Please key in the SlNo., Section , Clause , Description as given in Bid sheets and finally your Statement of Deviation/Variations.

This Sheet would be opened at the Techno-Commercial Opening.

For any further assistance for submitting your bids please call up KPTCL office. Please fill only in the blue coloured cells.

We agree to provide all original Documents in support of the information provided for verification upon request. (Key in as YES in the space provided)

We understand that the electonic bid submitted by us is a valid offer in accordance with IT Act. (Key in as YES in the space provided)

We are fully aware of the electronic bid formalities and abide by the same. (Key in as YES in the space provided)

If you are not deviating from any of the clauses mentioned please key in as 'NO DEVIATION' in the space provided.

Bidder's Name & Address alongwith GSTIN no. : TO,

The Chief Engineer, Electricity, Transmission Zone KPTCL Bagalkote-587103.

The following are the Technical Deviations and Variations from and exceptions to the Specifications and documents for

Combined package for, Replacement of old 11KV MCVCB SWGs at 110KV S/s Sankeshwar AREVA, Ainapur MEGAWIN and ABB, Hidkal Dam-Sadalaga-Nippani-BHEL, Galataga(Bhoj)-CGL in Chikkodi Div. Includes supply of materials/equipment, erection, civil works, testing & commissioning on Partial Turnkey Basis. Note:11KV Switchgear will be supplied by departmentally

These deviations and variations are exhaustive.Except these deiviations and variations, the entire work shall be performed as per your specification and documents.

Sl. NO. SECTION CLAUSE NO. DESC. AS PER SPECIFICATION STATEMENT OF DEVIATIONS/VARIATIONS

Note : Deviations specified elsewhere in the specification will not be considered.

Place Designation

Name of the company

KARNATAKA POWER TRANSMISSION CORPORATION LIMITED

SCHEDULE 7(List of special tools and tackles )

SHEET FOR TECHNOCOMMERCIAL OPENING

Tender Enquiry No:KPTCL/2026-27/SS/WORK_INDENT4230

Combined package for, Replacement of old 11KV MCVCB SWGs at 110KV S/s Sankeshwar AREVA, Ainapur MEGAWIN and ABB, Hidkal Dam-Sadalaga-Nippani-BHEL, Galataga(Bhoj)-CGL in Chikkodi Div. Includes supply of materials/equipment, erection, civil works, testing & commissioning on Partial Turnkey Basis. Note:11KV Switchgear will be supplied by departmentally

Bidder's Name & Address alongwith GSTIN no. : TO,

The Chief Engineer, Electricity, Transmission Zone KPTCL Bagalkote-587103.

List of special tools and tackles the price of which is included in bid price.

Sl. No. For equipment Description of item Unit Quantity

Place Designation

Name of the Company

KARNATAKA POWER TRANSMISSION CORPORATION LIMITED

SHEET FOR TECHNOCOMMERCIAL OPENING

Tender Enquiry No:KPTCL/2026-27/SS/WORK_INDENT4230

Combined package for, Replacement of old 11KV MCVCB SWGs at 110KV S/s Sankeshwar AREVA, Ainapur MEGAWIN and ABB, Hidkal Dam-Sadalaga-Nippani-BHEL, Galataga(Bhoj)-CGL in Chikkodi Div. Includes supply of materials/equipment, erection, civil works, testing & commissioning on Partial Turnkey Basis. Note:11KV Switchgear will be supplied by departmentally

NOTE: 1 ) SHALL BE UPLOADED WITHOUT PRICES

Bidder's Name & Address alongwith GSTIN no. : To,

The Chief Engineer, Electricity, Transmission Zone KPTCL Bagalkote-587103.

We have enclosed(uploaded) with our proposal the following additional information.

Sl. No. Brief Description of information Ref. and Page No.

Date Printed Name

Place Designation

KARNATAKA POWER TRANSMISSION CORPORATION LIMITED

SCHEDULE - 9 (1 of 5) : QUALIFYING REQUIREMENTS

SHEET FOR TECHNOCOMMERCIAL OPENING

Tender Enquiry No:KPTCL/2026-27/SS/WORK_INDENT4230

Combined package for, Replacement of old 11KV MCVCB SWGs at 110KV S/s Sankeshwar AREVA, Ainapur MEGAWIN and ABB, Hidkal Dam-Sadalaga-Nippani-BHEL, Galataga(Bhoj)-CGL in Chikkodi Div. Includes supply of materials/equipment, erection, civil works, testing & commissioning on Partial Turnkey Basis. Note:11KV Switchgear will be supplied by departmentally

Please fill Only in the Light Blue Couloured Cell.

BIDDER'S NAME AND ADDRESS: TO,

The Chief Engineer, Electricity, Transmission Zone KPTCL Bagalkote-587103.

a) * We have uploaded bid as individual Bidder. (Key in Individual Bidder )

b) * We have uploaded bid in Consortium with the following Bidders. (Key in Consortium ) VOID

Name of Consortium Partner Scope / Participation of each Consortium Partner

(* Fill-up whichever is applicable)

1.0 GENERAL INFORMATION

The Bidder, bidding for this package are requested to complete the information in the following form.

Sl.No. Particulars Bidder details

1 Name of the Firm

2 Address of Head Office / Registered Office GST no.

5 Name of Contact person with Designation

6 Place of Incorporation/Registration

7 Year of Incorporation/Registration

8 Constitution or legal status of Tenderer [Upload copy]

9 Place of Registration [Upload copy]

10 Principal place of business

2.0 We are furnishing the following details/documents in support of Qualifying requirement for above mentioned project

Sl.No. Bidder details Indicate Yes /No

(a) Written power of attorney of the signatory on the bid to commit the bidder. In case of Consortium

1 Furnished / Not

2 Uploaded / Not

(b) Certificate of Registration of the Company. Please mention the date of incorporation of the company

1 Uploaded / Not

(c ) Valid Super Grade Electrical Contractor’s License issued by the Government of Karnataka as on the date of techno commercial Bid opening. Please mention the date of expiry of the License certificate issued by GOK/ Undertaking to this effect

1 Uploaded / Not

(d) Self declaration regarding Litigation w.r.t KPTCL contracts over the last five years (refer ITT)

1 Uploaded / Not

(e) Self declaration for ‘not being disqualified regarding non-performance in any of the Government utilities in the past five years’. (refer ITT)

1 Uploaded / Not

(f) An undertaking to source the supply of equipment/ material from KPTCL approved vendors only as per QR for Vendor registration, available in the KPTCL website ie., kptcl.karnataka.gov.in, Link Tendering & Procurement-Application for Vendor.

1 Uploaded / Not

(g) Self declaration regarding no action against the bidder have been taken by KPTCL in respect of Risk & Cost clause

1 Uploaded / Not

(h) Self declaration regarding 'Eligibility clauses in respect of restrictions on procurement from a bidder of a country which shares a land border with India as per Annexure-XVI

1 Uploaded / Not

(i) Self declaration regarding RESTRICTIONS ON SOURCING OF EQUIPMENTS/MATERIALS BY THE BIDDER FROM A VENDOR OF A COUNTRY WHICH SHARES A LAND BORDER WITH INDIA as per Annexure -XVII

1 Uploaded / Not

Section 3 : 1.3 Work performed of similar nature in the last Ten years, preceding the date of Bid submissionof Bidder (Clause No: 3.2 (b) (i) & (ii) of ITT) - In respect of Terminal Bay Portion or Sub Station portion and Transmission Lines resp.

Project Name Name & Address of the Employer Description of Work Voltage class Number of Sub-Stations/TBs/Length of the Line Contract Number Value of contract Rs. Lakh Date of issue of work order Specified period of completion Actual date of commissioning Remarks explaining reasons for delay in commisioning of work

Note : 1 . The documentary proof of fulfilling the qualifying requirements shall be uploaded along with the bid. The bidder shall upload the P.O,LOI/LOA, DWA, Work done, Performance Certificates issued by the end users not below the rank of Executive/ Divisional Engineer along with the bid.

2. The qualifying experience of the Bidder who is having qualifying experience shall be furnished in the above performa and Documentary Proof in support of above shall be uploaded in the form of certificates issued by authorized officers of concerned organisations.

3. IF this sheet is insufficient for furnishing the qualifying experience of the Bidder then similar sheets shall be seperately uploaded.

Place Designation

Name of the Company

KARNATAKA POWER TRANSMISSION CORPORATION LIMITED

SCHEDULE - 9 (2 of 5) : QUALIFYING REQUIREMENTS

SHEET FOR TECHNOCOMMERCIAL OPENING

Combined package for, Replacement of old 11KV MCVCB SWGs at 110KV S/s Sankeshwar AREVA, Ainapur MEGAWIN and ABB, Hidkal Dam-Sadalaga-Nippani-BHEL, Galataga(Bhoj)-CGL in Chikkodi Div. Includes supply of materials/equipment, erection, civil works, testing & commissioning on Partial Turnkey Basis. Note:11KV Switchgear will be supplied by departmentally

Tender Enquiry No:KPTCL/2026-27/SS/WORK_INDENT4230

BIDDER'S NAME AND ADDRESS: TO,

The Chief Engineer, Electricity, Transmission Zone KPTCL Bagalkote-587103.

Section 3 : 1.5 Information on works for which Tenders have been submitted and works which are yet to be completed as on the date of this Tender of a Bidder

(A) Existing commitments and on-going works:

Description of work Place & State Contract No & Date Name and Address of Employer Value of contract (Rs. Lakh) Stipulated period of cof Completion Value of works remaining to be completed ( Rs.Lakhs) (Attach Certificates from Engineers –in- Charge) Anticipated date of commissioning

Ex-Works GST Total (Ex-works + GST)

Note:Attach Certificates from Engineers –in- Charge

B)Works for which Tenders already submitted

Description of work Place & State Name and Address of Employer Stipulated period of Completion Date when decision is expected Remarks if any

Total (Ex-works + GST)

i) The statements showing the value of existing commitments and on-going works as well as the stipulated period of completion remaining for each of the works listed should be countersigned by the Employer in charge, not below the rank of an Executive Engineer or equivalent. OR The statements showing the value of existing commitments and on-going works as well as the stipulated period of completion remaining for each of the works listed should be verified and certified by Chartered Accountant/Cost Auditor. However, the Bidder has to upload the PO/Work Award copies for existing commitments and on-going works

ii) A self-declaration is to be uploaded by the bidder stating that "the information with regard to assessed available tender capacity (Works on Hand) furnished are correct”.

Place Designation

Name of the Company

KARNATAKA POWER TRANSMISSION CORPORATION LIMITED

SCHEDULE - 9 (3 of 5) : QUALIFYING REQUIREMENTS

SHEET FOR TECHNOCOMMERCIAL OPENING

Combined package for, Replacement of old 11KV MCVCB SWGs at 110KV S/s Sankeshwar AREVA, Ainapur MEGAWIN and ABB, Hidkal Dam-Sadalaga-Nippani-BHEL, Galataga(Bhoj)-CGL in Chikkodi Div. Includes supply of materials/equipment, erection, civil works, testing & commissioning on Partial Turnkey Basis. Note:11KV Switchgear will be supplied by departmentally

Tender Enquiry No:KPTCL/2026-27/SS/WORK_INDENT4230

BIDDER'S NAME AND ADDRESS: TO,

The Chief Engineer, Electricity, Transmission Zone KPTCL Bagalkote-587103.

Following is the list of major supplied subsation equipments/accessories which are type tested and designed, manufactured by us in accordance with internationally recognised standards.

Sl. No. Item rating, type and Designation Qty Customer Date of Order Date of Supply Date of Commissioning Ref. of Cusomer's certificate of successful operation enclosed Ref. of layout & Customer's certificae for successful commission

Note: Documentary Proof in support of above shall be uploaded in the form of certificates issued by authorized officers of concerned organisations. .

Place Designation

Name of the Company

KARNATAKA POWER TRANSMISSION CORPORATION LIMITED

SCHEDULE - 9 (4 of 5) : QUALIFYING REQUIREMENTS

SHEET FOR TECHNOCOMMERCIAL OPENING

Combined package for, Replacement of old 11KV MCVCB SWGs at 110KV S/s Sankeshwar AREVA, Ainapur MEGAWIN and ABB, Hidkal Dam-Sadalaga-Nippani-BHEL, Galataga(Bhoj)-CGL in Chikkodi Div. Includes supply of materials/equipment, erection, civil works, testing & commissioning on Partial Turnkey Basis. Note:11KV Switchgear will be supplied by departmentally

Tender Enquiry No:KPTCL/2026-27/SS/WORK_INDENT4230

BIDDER'S NAME AND ADDRESS: To

The Chief Engineer, Electricity, Transmission Zone KPTCL Bagalkote-587103.

Section 3 : 1.7 Reports on the financial standing of the tenderer, such as Profit and Loss Statements and Auditor’s reports in the preceeding last five years, Audited Financial statements i.e Balance sheets, P&L statements, Turnover certificates duly certified by chartered Accountant as documentary evidence shall be uploaded.

SLNo. Particulars Year Lead Bidder Consortium Member

Mention Year Turnover excluding GST (in Rs.) GST Amount (in case GST is included in Turnover) (in Rs.) Turnover including GST (in Rs.) Mention Year Amount(Rs.)

Names of the constituent Firms VOID

1 Annual turn over for the last Five years Year(1) 2021-2022

2 Liquid Assets / Credit availability or access to evidence of assets

3 Whether Audited Balance sheets and Profit & Loss statement are enclosed for the last Five Years ? (yes/No)

4 Whether Bankers certificate enclosed for credit facilities? (Yes/No)

Place Designation

Name of the Company

Karnataka Power Transmission Corporation Limited

Tender Enquiry No:KPTCL/2026-27/SS/WORK_INDENT4230

SCHEDULE - 9 (5 of 5) : QUALIFYING REQUIREMENTS

Combined package for, Replacement of old 11KV MCVCB SWGs at 110KV S/s Sankeshwar AREVA, Ainapur MEGAWIN and ABB, Hidkal Dam-Sadalaga-Nippani-BHEL, Galataga(Bhoj)-CGL in Chikkodi Div. Includes supply of materials/equipment, erection, civil works, testing & commissioning on Partial Turnkey Basis. Note:11KV Switchgear will be supplied by departmentally

BIDDER'S NAME AND ADDRESS: TO,

THE CHIEF ENGINEER (ELECTRICTICTY), TENDERING AND PROCUREMENT, KPTCL, KAVERI BHAVAN, Bangalore - 560 009

The information to be filled in by the Tenderer hereunder will be used for purposes of computing Tender capacity as provided for in Clause 3 of the Instructions to Tenderers. This information will not be incorporated in the Contract.

1.1 Constitution or legal status of Tenderer [Upload copy]

Place of Registration [Upload copy]

Principal place of business

Section 3: 1.2 Total value of works executed (KPTCL & NON KPTCL works) and payments received in the last five years (in Rs. Lakhs)

1.2 Total value of works executed (KPTCL & NON KPTCL works) and payments received in the last five years (in Rs. Lakhs) of Bidder Financial Year Details

KPTCL works Non KPTCL works

Total value of works in Rs. Lakh Total value of works in Rs. Lakh

Note: Attach relevant Certificate/s from Chartered Accountant.

Section 3: 1.9 Name, address, and telephone, telex, and fax numbers of the Tenderers' bankers who may provide references if contacted by the Employer.

Sl.No Name, address, and telephone, telex, and fax numbers of the Tenderers' bankers

1.12 Information on litigations in which the Tenderer is involved:

Other Party(ies) Employer Details of Dispute Amount involved Remarks showing Present Status

Name of the Company

KARNATAKA POWER TRANSMISSION CORPORATION LIMITED

SCHEDULE-10 (1 of 3) Details of Tools and Plants available

SHEET FOR TECHNOCOMMERCIAL OPENING

Combined package for, Replacement of old 11KV MCVCB SWGs at 110KV S/s Sankeshwar AREVA, Ainapur MEGAWIN and ABB, Hidkal Dam-Sadalaga-Nippani-BHEL, Galataga(Bhoj)-CGL in Chikkodi Div. Includes supply of materials/equipment, erection, civil works, testing & commissioning on Partial Turnkey Basis. Note:11KV Switchgear will be supplied by departmentally

Tender Enquiry No:KPTCL/2026-27/SS/WORK_INDENT4230

BIDDER'S NAME AND ADDRESS: To

The Chief Engineer, Electricity, Transmission Zone KPTCL Bagalkote-587103.

Following are the details of the Tools and Plants available with us.

Sl. No. Description Quantity Make Present Location / Project Remarks (if any)

Place Designation

Name of the Company

KARNATAKA POWER TRANSMISSION CORPORATION LIMITED

SCHEDULE 10 (2 of 3) Details of Technical staff employed

SHEET FOR TECHNOCOMMERCIAL OPENING

Combined package for, Replacement of old 11KV MCVCB SWGs at 110KV S/s Sankeshwar AREVA, Ainapur MEGAWIN and ABB, Hidkal Dam-Sadalaga-Nippani-BHEL, Galataga(Bhoj)-CGL in Chikkodi Div. Includes supply of materials/equipment, erection, civil works, testing & commissioning on Partial Turnkey Basis. Note:11KV Switchgear will be supplied by departmentally

Tender Enquiry No:KPTCL/2026-27/SS/WORK_INDENT4230

BIDDER'S NAME AND ADDRESS: To

The Chief Engineer, Electricity, Transmission Zone KPTCL Bagalkote-587103.

Section 3: 1.8 Qualification and experience of the key technical and management personnel in permanent employment with the tenderer and those that are proposed to be deployed on this contract, if awarded

Sl. No. Name of the employee Designation Branch (Degree/Diploma) Year of Passing Since when employed in erection division Past Experience

Place Designation

Name of the Company

KARNATAKA POWER TRANSMISSION CORPORATION LIMITED

SCHEDULE 10 (3 of 3 )

SHEET FOR TECHNOCOMMERCIAL OPENING

Combined package for, Replacement of old 11KV MCVCB SWGs at 110KV S/s Sankeshwar AREVA, Ainapur MEGAWIN and ABB, Hidkal Dam-Sadalaga-Nippani-BHEL, Galataga(Bhoj)-CGL in Chikkodi Div. Includes supply of materials/equipment, erection, civil works, testing & commissioning on Partial Turnkey Basis. Note:11KV Switchgear will be supplied by departmentally

Tender Enquiry No:KPTCL/2026-27/SS/WORK_INDENT4230

BIDDER'S NAME AND ADDRESS: To

The Chief Engineer, Electricity, Transmission Zone KPTCL Bagalkote-587103.

We propose the following deployment of manpower for the Terminal Bay Portion and Line Package.

Sl. No. Category MONTHS AFTER PLACEMENT OF AWARD LETTER

1 Project manager

2 Sr. Project Manager

5 Skilled labour

6 No skilled labour

Place Designation

Name of the Company

KARNATAKA POWER TRANSMISSION CORPORATION LIMITED

SCHEDULE-11 (A) : COMPLETION SCHEDULE FOR STATION/TERMINAL BAYS

SHEET FOR TECHNOCOMMERCIAL OPENING

Combined package for, Replacement of old 11KV MCVCB SWGs at 110KV S/s Sankeshwar AREVA, Ainapur MEGAWIN and ABB, Hidkal Dam-Sadalaga-Nippani-BHEL, Galataga(Bhoj)-CGL in Chikkodi Div. Includes supply of materials/equipment, erection, civil works, testing & commissioning on Partial Turnkey Basis. Note:11KV Switchgear will be supplied by departmentally

Tender Enquiry No:KPTCL/2026-27/SS/WORK_INDENT4230

Bidders Name and Address: To,

The Chief Engineer, Electricity, Transmission Zone KPTCL Bagalkote-587103.

We hereby declare that following schedules shall be followed by us for the above work. The period of various activities from the date of placement of award letter shall be as follows

SL.NO Activity Construction of Sub-station/Terminal Bays

Commencement Completion

1 Detailed engineering

2 Procurement of bought out items / raw materials

3 Manufacturing & Testing

5 Setting up of site office, Sheds & stores etc.

7 Concreting for

a)Structure Foundations

b)Equipment and mounting structure foundadions

c)Cable trenches

2. Installation

8 Receipt(at site) of

a)Main equipment / spares

c)Insulators & Hardwares

d)Clamps & Connectors

e)Marshalling kiosks

f)Cables & Cabling Materials

a)Main structures

b)Equipment support structures

10 Equipment Erection

12 Bus bar erection

15 Completion of testing and ready for commissioning

16 Commissioning

Place Designation

Name of the Company

KARNATAKA POWER TRANSMISSION CORPORATION LIMITED

SCHEDULE-11B : COMPLETION SCHEDULE FOR TRANSMISSION LINES

SHEET FOR TECHNOCOMMERCIAL OPENING

Combined package for, Replacement of old 11KV MCVCB SWGs at 110KV S/s Sankeshwar AREVA, Ainapur MEGAWIN and ABB, Hidkal Dam-Sadalaga-Nippani-BHEL, Galataga(Bhoj)-CGL in Chikkodi Div. Includes supply of materials/equipment, erection, civil works, testing & commissioning on Partial Turnkey Basis. Note:11KV Switchgear will be supplied by departmentally

Tender Enquiry No:KPTCL/2026-27/SS/WORK_INDENT4230

Bidders Name and Address: To,

The Chief Engineer, Electricity, Transmission Zone KPTCL Bagalkote-587103.

We hereby declare that following shedules shall be followed by us for the above work. The period of various activities from the date of placement of award letter shall be as follows.

SL.NO Activity Period in Months for the Work of Construction of Transmission Lines

Commencement Completion

I SUPPLY VOID VOID

1 Submission of Drawings

2 Completion of detailed engineering

3 Commencement of Manufacturing

4 Completion of Manufacturing

5 Readiness for testing

6 Readiness for Shipment

7 Receipt at Site

8 Completion of Shipment

1 Detailed Survey

2 Setting up of site office, sheds and stores etc.

3 Exacavation for foundations.

4 Foundations and other Civil Works

5 Erection of Tower alongwith accessories

6 Stringing of conductor/ groundwire alongwith accessories

7 Testing , Commissioning and Handing over.

Place Designation

Name of the Company

Karnataka Power Transmission Corporation Limited

SCHEDULE - 12 TYPE TESTS & TEST CHARGES OF EQUIPMENT/MATERIALS

SHEET FOR TECHNOCOMMERCIAL OPENING

Combined package for, Replacement of old 11KV MCVCB SWGs at 110KV S/s Sankeshwar AREVA, Ainapur MEGAWIN and ABB, Hidkal Dam-Sadalaga-Nippani-BHEL, Galataga(Bhoj)-CGL in Chikkodi Div. Includes supply of materials/equipment, erection, civil works, testing & commissioning on Partial Turnkey Basis. Note:11KV Switchgear will be supplied by departmentally

Tender Enquiry No:KPTCL/2026-27/SS/WORK_INDENT4230

BIDDERS SHALL INDICATE VARIOUS TYPE TESTS IN LIGHT BLUE COLOURED CELLS

ALL THE TYPE TESTS APPLICABLE FOR EACH OF THE EQUIPMENTS SHALL BE INCLUDED.

Bidders Name and Address To,

The Chief Engineer, Electricity, Transmission Zone KPTCL Bagalkote-587103.

SL.No Details of Equipments Type Test Test Charges ( in Rs )

1 Power Transformers:

b) 100MVA,220/110kV VOID

b) 20MVA, 110/11kV

2 SF6 Circuit Breakers:

a)220KV Class VOID

a)220KV Class VOID

4 Current Transformer:

a)220KV Class VOID

5 Voltage Transformers:

a)220KV Class VOID

6 Capacitive Voltage Transformers:

a)220KV Class VOID

7 Surge Arrestors

a)198 KV class VOID

c)60 KV class VOID

8 a) Relay & Protection Panels

b) Substation Automation VOID

9 L.T. A.C Panel

10 Station Battery

11 Station Battery Charger

12 PLCC Battery

13 PLCC Battery Charger

14 1.1KV Copper control cables/LT Power Cable

15 11KV U.G Cable

16 PLCC equipment

17 Conductors & Earth Wire a) Drake ACSR

b) Coyote conductor

c) Lynx conductor

18 Insulators a) 120/90KN Disc Insulator Strings

b) Solid Core Insulators

c) Silicon rubber/ Disc/ Long rod insulators

d) Post Insulators

19 Station / Mounting Structures

21 Hardware Materials

22 Aluminium pipe and Clamps

23 AC DISTRIBUTION BOX

24 DC DISTRIBUTION BOX

25 Nitrojen Fire Fighting Protection System

NOTE: The Type Test / Special Tests, if repeated at the insistance of owner, the applicable testing charges shall be paid by the successful Bidder upfront to the laboratory and the same shall be reimbursable by KPTCL as per actuals on submission of Bills along with proof of payment and on successful completion of all the Type Tests, specified and on approval of the same by the owner. In case equipment/material fails in the type tests during testing then the testing charges paid by the Bidder to the laboratory will not be reimbursed by KPTCL. The above Clause is applicable for all the equipments/materials, in case, the Type Test / Special Tests, are repeated at the insistance of owner(KPTCL).

Place Printed Name

Karnataka Power Transmission Corporation Limited

Schedule -13-List of Optional Spares

SHEET FOR TECHNOCOMMERCIAL OPENING

Combined package for, Replacement of old 11KV MCVCB SWGs at 110KV S/s Sankeshwar AREVA, Ainapur MEGAWIN and ABB, Hidkal Dam-Sadalaga-Nippani-BHEL, Galataga(Bhoj)-CGL in Chikkodi Div. Includes supply of materials/equipment, erection, civil works, testing & commissioning on Partial Turnkey Basis. Note:11KV Switchgear will be supplied by departmentally

Tender Enquiry No:KPTCL/2026-27/SS/WORK_INDENT4230

BIDDERS SHALL NOTE THAT QUANTITIES INDICATED IN THE ITEM_WISE FINANCIAL BID OFFER SHALL BE INDICATED HERE ALSO.

Bidders Name and Address

To, The Chief Engineer, Electricity, Transmission Zone KPTCL Bagalkote-587103.

List of optional spares required to meet the specified performance for a period of three years

Sl. No. For Equipments Details of item Unit Quantity

Place Designation

Name of the Company

Karnataka Power Transmission Corporation Limited

LIST OF VENDORS

SHEET FOR TECHNOCOMMERCIAL OPENING

Combined package for, Replacement of old 11KV MCVCB SWGs at 110KV S/s Sankeshwar AREVA, Ainapur MEGAWIN and ABB, Hidkal Dam-Sadalaga-Nippani-BHEL, Galataga(Bhoj)-CGL in Chikkodi Div. Includes supply of materials/equipment, erection, civil works, testing & commissioning on Partial Turnkey Basis. Note:11KV Switchgear will be supplied by departmentally

Tender Enquiry No:KPTCL/2026-27/SS/WORK_INDENT4230

BIDDERS NAME AND ADDRESS To, The Chief Engineer, Electricity, Transmission Zone KPTCL Bagalkote-587103.

Sl. No. EQUIPMENT/ MATERIAL NAME OF THE VENDOR

VENDOR 1 VENDOR 2 VENDOR 3 VENDOR 4

1 Power Transformers:

b) 20MVA, 110/11kV

2 SF6 Circuit Breakers:

4 Current Transformer:

5 Voltage Transformers:

6 Capacitive Voltage Transformers:

7 Surge Arrestors

8 a) Relay & Protection Panels

b) Substation Automation

9 L.T. A.C Panel

10 Station Battery

11 Station Battery Charger

12 PLCC Battery

13 PLCC Battery Charger

14 1.1KV Copper control cables/LT Power Cable

15 11KV U.G Cable

16 PLCC equipment

17 Conductors & Earth Wire a) Drake ACSR

b) Coyote conductor

c) Lynx conductor

18 Insulators a) 120/90KN Disc Insulator Strings

b) Solid Core Insulators

c) Silicon rubber/ Disc/ Long rod insulators

d) Post Insulators

19 Station / Mounting Structures

21 Hardware Materials

22 Aluminium pipe and Clamps

23 AC DISTRIBUTION BOX

24 DC DISTRIBUTION BOX

25 Nitrojen Fire Fighting Protection System

Note : Any Other Materials name & its vendors are to be entered.

Place Designation

Name of the Company

SCHEDULE-16 : NO DEVIATION CERTIFICATE (ANNEXURE-I)

SHEET FOR TECHNOCOMMERCIAL OPENING

Combined package for, Replacement of old 11KV MCVCB SWGs at 110KV S/s Sankeshwar AREVA, Ainapur MEGAWIN and ABB, Hidkal Dam-Sadalaga-Nippani-BHEL, Galataga(Bhoj)-CGL in Chikkodi Div. Includes supply of materials/equipment, erection, civil works, testing & commissioning on Partial Turnkey Basis. Note:11KV Switchgear will be supplied by departmentally

Tender Enquiry No:KPTCL/2026-27/SS/WORK_INDENT4230

NOTE: SCHEDULE DULY SIGNED BY THE AUTHORIZED PERSON SHALL BE UPLOADED

With reference to our Bid Proposal No dated

We hereby confirm that we have read the provisions of the contract, the stipulation of these clause are acceptable to us,

and we have not taken any deviation whatsoever to these clauses:

a) Terms of Payment Clause No. 37 of Section-5 : Conditions of Contract – CC, Cl. No. 8 of Special Conditions of Contract-SCC

b) Bid guarantee Clause No. 6, Section :1, Invitation for Tenders (IFT) and Clause No. 13, Section :2, Instruction to Tenderer-ITT

c) Contract Performance guarantee Clause 29, Section –2, Instruction to Tenderer-ITT.

d) Penalty for delay Clause No. 41 of Section-5 - Conditions of Contract-CC

e) Price Basis/Price Adjustment Clause No. 40 of Section-5-Conditions of Contract-CC

f)Defects Liability Period/ Guarantee Clause No. 10 of Special Conditions of Contract-SCC

g) Work Schedule Clause No. 17 of Conditions of Contract-CC

h) Taxes and duties Clause No. 11.11 of Instruction to Tenderer (ITT)

We further confirm that any deviation to the above clauses at SI.No. (a) to (h) found anywhere in our bid proposal, implicit or explicit, shall stand unconditionally withdrawn, without any cost, implication whatsoever to KPTCL.

Place Designation

Name of the Company

Karnataka Power Transmission Corporation Limited

SCHEDULE-17(a) FORM FOR BID SECURITY/EMD (ANNEXURE-II) (To be stamped on Rs.300/- Non-Judicial stamp paper in accordance with KPTCL Circular No. KPTCL/GMT/CIVIL (B7)/35/2024-MANAGE ESTATE (E-106992) dated 02.03.2024)

SHEET FOR TECHNOCOMMERCIAL OPENING

Combined package for, Replacement of old 11KV MCVCB SWGs at 110KV S/s Sankeshwar AREVA, Ainapur MEGAWIN and ABB, Hidkal Dam-Sadalaga-Nippani-BHEL, Galataga(Bhoj)-CGL in Chikkodi Div. Includes supply of materials/equipment, erection, civil works, testing & commissioning on Partial Turnkey Basis. Note:11KV Switchgear will be supplied by departmentally

Tender Enquiry No:KPTCL/2026-27/SS/WORK_INDENT4230

NOTE: SCHEDULE DULY SIGNED BY THE AUTHORIZED PERSON SHALL BE SENT ALONG WITH ORIGINAL BANK GUARANTEE AND ORIGINAL DD (TOWARDS SFMS CHARGES IF ANY ) TO CHIEF ENGINEER ELECTRICIYT (T&P),KPTCL BANGALORE SO AS TO REACH AFTER THE LAST SUBMISSION DATE & ON OR BEFORE THE DATE & TIME OF OPENING TECHNO COMMERCIAL BIDS.

Ref No. Bank Guarantee No.

In accordance with Invitation to Bid under your specification

No. M/s having its Registered /

Head Office at (hereinafter called the 'Bidder') wish

to participate in the said Bid or and you, as a special favour have agreed

to accept an irrevocable and unconditional bank guarantee for an amount of

valid up to on behalf of Bidder in lieu of the Bid deposit required to be made

by the Bidder as a condition predecent for participation in the said Bid,in addition to the Demand draft No.

we the Bank at having our Head office at

(local address) guarantee and undertake to pay immediately on demand by Karnataka Power Transmission Corporation

the amount of (in figures and words)

without any reservation, protest, demur and recourse. Any such demand made by said `Owner' shall be conclusive and binding on us irrespective of any dispute or difference raised by the Bidder.

This Guarantee shall be irrevocable and shall remain valid up to and including

If any further extension of this guarantee is required, the same shall be extended to such required period (not exceeding one year) on receiving instructions

from M/s on whose behalf this guarantee is issued.

This Guarantee has been issued using SFMS Platform and the requisite communication in this regard has been forwarded to the Beneficiary Bank.

In witness whereof the Bank, through its authorised officer, has set its hand and stamp on this

Signature Signature

Official Addressess Designation with Bank Stamp.

Attorney as per Power of Attorney No.

Note : 1) Both the Bank Guarantee and Demand Draft shall be scanned and uploaded along with Electronic sheets. 2) This date shall be Forty Five (45) days after the last date for which the bid is valid.

Karnataka Power Transmission Corporation Limited

SCHEDULE-17b Form of Insurance Surety Bond towards EMD (ANNEXURE-IIB) (To be stamped on Rs.300/- Non-Judicial stamp paper in accordance with KPTCL Circular No. KPTCL/GMT/CIVIL (B7)/35/2024-MANAGER ESTATE (E-106992) dated 02.03.2024)

SHEET FOR TECHNOCOMMERCIAL OPENING

Tender Enquiry No:KPTCL/2026-27/SS/WORK_INDENT4230

Combined package for, Replacement of old 11KV MCVCB SWGs at 110KV S/s Sankeshwar AREVA, Ainapur MEGAWIN and ABB, Hidkal Dam-Sadalaga-Nippani-BHEL, Galataga(Bhoj)-CGL in Chikkodi Div. Includes supply of materials/equipment, erection, civil works, testing & commissioning on Partial Turnkey Basis. Note:11KV Switchgear will be supplied by departmentally

Insurance Surety Bond No.

In accordance with Invitation for Bids under your Bid Document No

M/s having its Registered /

Head Office at (hereinafter called the 'Contractor') wish

to participate in the said Bid for

As an irrevocable Insurance Surety Bond against Bid Security for an amount of * valid for days from **

required to be submitted by the Contractor as a condition precedent for participation in the said bid which amount is liable to be forfeited on the happening of any contingencies as mentioned under the Bidding Documents.

we, the having our Head office at

guarantee and undertake to pay immediately on demand by Karnataka Power Transmission Corporation Limited, (hereinafter called the 'Owner') the amount of

without any reservation, protest, demand and recourse. Any such demand made by the 'Owner' shall be conclusive and binding on us irrespective

of any dispute or difference raised by the Contractor and/or any right/remedy available to the Contractor in terms thereof.

This Insurance Surety Bond shall be unconditional as well as irrevocable and shall remain valid upto

If any further extension of this Insurance Surety Bond is required, the same shall be extended to such required period (not exceeding one year) on receiving instructions from

M/s on whose behalf this Insurance Surety Bond is issued.

In witness where of the Insurer, through its authorised officer, has set its hand and stamp on this

Signature Signature

Official Addressess Designation with Insurer Stamp

Attorney as per Power of Attorney No.

NOTE: 1. (*) The amount shall be as specified in the SPC. (**) This shall be the last date of bid submission deadline. (@) This date shall be Forty Five (45) days after the last date for which the bid is valid 2. The Insurance Surety Bond shall be from an Insurer as per guidelines issued by Insurance Regulatory and Development Authority of India (IRDAI) as amended from time to time. 3. The Owner shall be the Creditor, the Contractor shall be the Principal debtor and the Insurance company/Insurer shall be the Surety in respect of the Insurance Surety Bond to be issued by the Insurer. 4. The Insurance Surety Bond should be on Non-Judicial stamp paper/e-stamp paper of appropriate value as per Stamp Act prevailing in the state(s) where the Insurance Surety Bond is submitted or is to be acted upon or the rate prevailing in State where the Insurance Surety Bond is executed, whichever is higher. The Stamp Paper/e- stamp paper shall be purchased in the name of Contractor /Insurer issuing the Insurance Surety Bond. 5. While getting the Insurance Surety Bond issued, Contractors are required to ensure compliance to the points mentioned in Form of Bank Guarantee/Insurance Surety Bond Verification Check List enclosed in this Section of Bidding Documents. Further, Contractors are required to fill up this Form and enclose the same with the Insurance Surety Bond.

Karnataka Power Transmission Corporation Limited

SCHEDULE-18 PROFORMA OF LETTER OF UNDERTAKINGS (ANNEXURE-V)

SHEET FOR TECHNOCOMMERCIAL OPENING

Combined package for, Replacement of old 11KV MCVCB SWGs at 110KV S/s Sankeshwar AREVA, Ainapur MEGAWIN and ABB, Hidkal Dam-Sadalaga-Nippani-BHEL, Galataga(Bhoj)-CGL in Chikkodi Div. Includes supply of materials/equipment, erection, civil works, testing & commissioning on Partial Turnkey Basis. Note:11KV Switchgear will be supplied by departmentally

Tender Enquiry No:KPTCL/2026-27/SS/WORK_INDENT4230

NOTE: SCHEDULE DULY SIGNED BY THE AUTHORIZED PERSON SHALL BE UPLOADED

(To be executed on Non-Judicial paper of RequisiteValue

1. I*/We* have read and examined the following bid documents relating to the

(full Scope of Work)

a) Notice Inviitng Tender/

b) Conditions of Contract containing section 'Invitation for Tenders’, 'Instructions to Tenderers’, ‘Conditions of Contract’ and Contract Data.

c) Special Conditions of Contract along with Annexure to

d) Drawings No.

e) Technical Specifications

2 . I / We hereby submit our Bid and undertake to keep our Bid Valid for a period of One Hundred and Eighty days (180 days) from the Last date of bid submission as notified (either original or extended). I*/We* hereby further undertake that during said period I/We shall not vary/alter or revoke my/our Bid.

This undertaking is in consideration of KPTCL agreeing to open my/ our Bid and consider and evaluate the same for the purpose of award of Work in terms of provisions of clause entitled "Award of Construct" 'cl.no. 26 of Section ITT of the Bid Documents.

Should this bid be accepted, I*/We* also agree to abide by and fulfil all the terms, conditions of provision of the above mentioned bid.

Signature along with Seal of Co.

(Duly Authorised to sign the Tender on Behalf of the Contractor.)

NAME OF THE COMPANY (in Block Letters)

SIGNATURE Date and Postal Address

DATE Telegraphic Address

NAME AND ADDRESS Telephone No.

KARNATAKA POWER TRANSMISSION CORPORATION LIMITED

SCHEDULE-19 CONSORTIUM AGREEMENT (To be stamped on Rs.500/- Non Judicial stamp paper in accordance with KPTCL Circular No. KPTCL/GMT/CIVIL(B7)/35/2024-MANAGE ESTATE (E-106992) dated 02.03.2024) (ANNEXURE -XIII)

SHEET FOR TECHNOCOMMERCIAL OPENING

Tender Enquiry No:KPTCL/2026-27/SS/WORK_INDENT4230

KARNATAKA POWER TRANSMISSION CORPORATION LIMITED

SCHEDULE-20(A) : POWER OF ATTORNEY (ANNEXURE-XI)

For Individual Bidder

SHEET FOR TECHNOCOMMERCIAL OPENING

Tender Enquiry No:KPTCL/2026-27/SS/WORK_INDENT4230

Combined package for, Replacement of old 11KV MCVCB SWGs at 110KV S/s Sankeshwar AREVA, Ainapur MEGAWIN and ABB, Hidkal Dam-Sadalaga-Nippani-BHEL, Galataga(Bhoj)-CGL in Chikkodi Div. Includes supply of materials/equipment, erection, civil works, testing & commissioning on Partial Turnkey Basis. Note:11KV Switchgear will be supplied by departmentally

NOTE: SCHEDULE DULY SIGNED BY THE AUTHORIZED PERSON SHALL BE UPLOADED

POWER OF ATTORNEY

(To be stamped on Rs.500/- Non Judicial stamp paper in accordance with KPTCL Circular No. KPTCL/GMT/CIVIL (B7)/35/2024-MANAGE ESTATE (E-106992) dated 02.03.2024)

KNOW ALL MEN BY THESE PRESENTS that we

a Company incorporated

under the laws of

and having its Registered Office / Head Office at

"Manufacturer / Bidder" which expression shall unless repugnant to the

Context or meanig thereof, include its successors, administrators and assigns)

acting through Mr its constitute, nominate and appoint

M/s a Company incorporated under the laws of

and having its Registered / Head Office at

as its duly constituted lawful Attorney (hereinafter called "Attorney"

or "Authorized Representative") to exercise all or any of the powers for and on

behalf of the "Manufacturer / Bidder" in regard to Specification No.

the bids for which have been invited by

(Address "Owner") to undertake the following acts:

i. To submit proposal and participate in the aforesaid Bid Specification of the Owner on behalf of the "Manufacturer / Bidder".

ii. To negotiate with the "Owner" the terms and conditions including price for award of the contract pursuant to the aforesaid Bid and to sign the contract with the "Owner" for and on behalf of the Manufacturer / Bidder.

iii. To receive accept and execute the contract for and on behalf of the "Manufacturer / Bidder".

iv. To do any other act or submit any document related to the above.

It is expressly understood that the Power of Attorney shall remain valid, binding and irrecoverable till submission of the Contract performance guarantee in terms of the Contract. The "Manufacturer / Bidder" hereby agrees and undertakes to ratify and confirm all the whatsoever the said "Attorney" / "Authorised Representative" quotes in the Bid, negotiates and signs the contract with the "Owner" and / or purports to act on behalf of the "Manufacturer / Bidder" by virtue of this Power of Attorney and the same shall bind the "Manufacturer / Bidder" as if done by itself.

IN WITNESS WHEREOF THE "Manufacturer / Bidder" has executed these presents at

on this day of under

the Common Seal of the Manufacturer company / Bidder.

Specimen Signature of Attorney Holder

(Name & Designation) For and on behalf of

Common Seal of the above Manufacturer / Bidder

Has been affixed thereto in the presence of :

KARNATAKA POWER TRANSMISSION CORPORATION LIMITED

SCHEDULE-20(B) : POWER OF ATTORNEY (ANNEXURE-XI)

(For Consortium Member )

SHEET FOR TECHNOCOMMERCIAL OPENING

Tender Enquiry No:KPTCL/2026-27/SS/WORK_INDENT4230

KARNATAKA POWER TRANSMISSION CORPORATION LIMITED

SCHEDULE-20(C) : COMBINED POWER OF ATTORNEY (ANNEXURE-XV)

(For Consortium )

SHEET FOR TECHNOCOMMERCIAL OPENING

Tender Enquiry No:KPTCL/2026-27/SS/WORK_INDENT4230

Karnataka Power Transmission Corporation Limited

SHEET FOR TECHNOCOMMERCIAL OPENING (UN - PRICED)

Tender Enquiry No:KPTCL/2026-27/SS/WORK_INDENT4230

Combined package for, Replacement of old 11KV MCVCB SWGs at 110KV S/s Sankeshwar AREVA, Ainapur MEGAWIN and ABB, Hidkal Dam-Sadalaga-Nippani-BHEL, Galataga(Bhoj)-CGL in Chikkodi Div. Includes supply of materials/equipment, erection, civil works, testing & commissioning on Partial Turnkey Basis. Note:11KV Switchgear will be supplied by departmentally

Bidders Name and Address

To, The Chief Engineer, Electricity, Transmission Zone KPTCL Bagalkote-587103.

We Declare that the ratings and performance figures of the equipment furnished by us under the Turnkey Package are Guaranteed. We further declare that in the event of any deficiencies in meeting the guarantees in repect of the characteristics as established after conducting the performance test, you may at your discretion, reject the equipment, in which case we shall replace the same with equipment as per specification and meeting the guarantee, free of charge and within a resonable time, to be mutually agreed.

Place Designation

Name of the Company

KARNATAKA POWER TRANSMISSION CORPORATION LIMITED

SCHEDULE -21 - CHECK LIST

Tender Enquiry No:KPTCL/2026-27/SS/WORK_INDENT4230

Combined package for, Replacement of old 11KV MCVCB SWGs at 110KV S/s Sankeshwar AREVA, Ainapur MEGAWIN and ABB, Hidkal Dam-Sadalaga-Nippani-BHEL, Galataga(Bhoj)-CGL in Chikkodi Div. Includes supply of materials/equipment, erection, civil works, testing & commissioning on Partial Turnkey Basis. Note:11KV Switchgear will be supplied by departmentally

Bidder's Name & Address alongwith GSTIN no. : To,

The Chief Engineer, Electricity, Transmission Zone KPTCL Bagalkote-587103.

CHECK LIST FOR SUBMISSION OF SCHEDULES

REFERENCE OF FORM & SCHEDULE DETAILS OF FORM & SCHEDULE WHETHER INCLUDED IN TECHNO-COMMERCIAL SHEETS (ELECTRONIC) YES/NO WHETHER INCLUDED IN Lumpsum Bid Financial Offer (ELECTRONIC) YES/NO WHETHER INCLUDED IN COMMERCIAL

PROPOSAL BID PROPOSAL

Schedule - 1 PRICE COMPONENTS

Schedule 2 (1 of 2 & 2 of 2) Summary of Price Components

Schedule 2A Schedule of Discounts

Schedule 2B Statement of Commercial Terms & Conditions

Schedule 3A, 3B & 3C Break up for supply/Erection/Civil/Design (if any) portion

Schedule -4 Break up for mandatory spares and maintenance & Testing Equipments.

Schedule 5 Commercial deviations

Schedule 6 Technical deviations

Schedule 7 List of special Tools & Tackles

Schedule 8 Additional information.

Schedule 9 Qualifying requirement [Technical & Financial]

Schedule 10 Details of Tools and plants and man power deployment

Schedule 11A Schedule for activities & Commissioning- For Station

Schedule 11B Schedule for activities & Commissioning- For Transmission LineWork

Schedule 12 Type Tests

Schedule 13 List of optional spares and cost.

Schedule 14 Guaranteed loss of transformer/ cables/HTLS Conductor equivalent to Drake ACSR

Schedule 15 List of vendors.

Schedule 16 Annexure 'A' No deviation certificate

Schedule 17 Proforma for Bid guarantee

Schedule 18 Proforma for letter of undertaking

Schedule 19 CONSORTIUM AGREEMENT

Schedule 20(A) Power of attorney - Bidder

Schedule 20(B) Power of attorney - Consortium Member

Schedule 20(C) Combined Power of Consortium

Schedule 21 Guarantee Declaration

Schedule 22 Check list

DRS - 1 to 19 Relevant Technical details for Materials / Equipments

To be Attached Contract Quality Assurance Programme

To be Attached Acivity Chart

To be Attached Type Test Certificates

To be furnished & Attached Bid Security /EMD

To be Attached Written Power of Attorney

To be Attached Letter of Undertaking

To be Attached No Deviation Certificate

To be Attached Consortium agreement if applicable

To be Attached All proof regarding Qualifying Requirements as per cl. no. 2 & 3 of ITT

Sec-3 Qualification information Qualification information

To be Attached Self Declarations of Tenderer for the following shall be upload along with the other documents. i) Information on any litigation or arbitration arising out of contracts completed or under execution by it over the last five years with KPTCL. ii) Information on Blacklisted/disqualification for non-performance in any of the Government utilities in the past five years. iii) Information on no such actions against the bidder have been taken by KPTCL invoking 'Risk & Cost' clause in the last six months.

To be Attached iV) Information on Eligibility clauses in respect of restrictions on procurement from a Bidder and Vendor of a country which shares a land border with India.

To be Attached ANY OTHER AGREEMENTS / UNDERTAKINGS/SELF DECLARATIONS SPECIFIED IN THE TENDER

To be Attached All other details sought in tender documents

Place Designation

Name of the Company

KARNATAKA POWER TRANSMISSION CORPORATION LIMITED

Tender Enquiry No:KPTCL/2026-27/SS/WORK_INDENT4230

Combined package for, Replacement of old 11KV MCVCB SWGs at 110KV S/s Sankeshwar AREVA, Ainapur MEGAWIN and ABB, Hidkal Dam-Sadalaga-Nippani-BHEL, Galataga(Bhoj)-CGL in Chikkodi Div. Includes supply of materials/equipment, erection, civil works, testing & commissioning on Partial Turnkey Basis. Note:11KV Switchgear will be supplied by departmentally

GUARANTEED TECHNICAL PARTICULARS FOR POWER CABLES (LV CABLES)

No. of cores X size (Sq.mm)

2 Type (Cable code)

3 Applicable standard

4 Voltage grade

5 Suitable for system with earthed Neutral

6 Maximum conductor temperature

a Normal continuous operation Deg C

b Short circuit condition Deg C

c No. of wires/diameter of wire (before stranding) No/mm

a Material/type

b Radial thickness (Nominal) mm

c Radial thickness (Minimum) mm

c Radial thickness (Minimum) mm

d Calculated dia over laid up cores mm

b Dia of Al/galvanized steel wires mm

c No. of wires Nos

d DC resistance of armour at 20 Deg C ohm/km

e Short circuit rating of armour KA/1 Sec

f Calculated dia over inner sheath mm

11 Outer sheath

c Radial thickness (Minimum) mm

d Minimum oxygen index of outer sheath at 27+/-2 deg C

e Minimum temperature index at 250 deg C

f Calculated dia under the outer sheath mm

12 Overall dia of cable (approx) (with +or -2.5 mm tolerance)

13 Weight (approx) (+ or - 10% tolerance) kg/km

14 Standard drum length mm

15 Gross shipping weight of drum (only for guidance) kg

16 Assumptions for current rating

a Max conductor temp 70 Deg C

b depth of laying, laid direct in ground 75 cm

c Ground temp 30 deg C

d Ambient temperature 40 deg C

e Soil thermal resistivity 150 deg C cm/w

Current ratings

a laid direct in ground Amp

b laid direct in duct Amp

c laid direct in air Amp

17 D.C resistance of conductor a 20 deg C (max)

18 AC resistance of conducor at 70 deg C Ohm/km

19 Insulation resistance per core Ohm/km

20 Equivalent star reactance (approx) Ohm/km

21 Equivalent star capacitance Mfd/km

22 Short circuit rating of conductor for 1 sec KA

23 Minimum bending radius of cable (times over all dia) D

24 Rating factor (please attach data sheets)

a Depth of laying

b Variation in ground temp

c Variation in ambient temp

d Group rating factor

22 1) Continuous current rating of the cable

a) In ground at soil temperature 30°C and soil thermal resistivity of 150°C cm/watt and depth of burial about a metre (A)

b) In air at 40°C (A)

c) Overload capacity and duration (A, Hr)

d) Derating Factors for :

i) Soil temperature and thermal resistivity

ii) Ambient temperature

iii) Single core cables laid in trefoil circuits

2) General Technical Data (Power cables)

2.1) Equivalent star impedance per km of 3 Ph, circuit at power frequency at maximum conductor temperature (Ohm)

2.2) Maximum electrostatic capacitance per core per km of cable (F)

2.3) Maximum charging current per conductor per km at nominalvoltage (A)

2.4) Loss tangent at normal frequency and rated voltage

2.5) Maximum dielectric loss of cable per km at normal voltage and frequency Watts/km

2.6) Short circuit capacity for 1 Sec. KA (rms)

2.7) Short Circuit current capacity of armour (kA for 1 sec)

2.8) Maximum dielectric stress at core screen (kV/cm)

2.9) Maximum overall dia. of cable (mm)

3.0) Construction details including type of material used and thickness of each material for each type of cable in a tabular form.

Place Designation

Name of the Company

KARNATAKA POWER TRANSMISSION CORPORATION LIMITED

Tender Enquiry No:KPTCL/2026-27/SS/WORK_INDENT4230

Combined package for, Replacement of old 11KV MCVCB SWGs at 110KV S/s Sankeshwar AREVA, Ainapur MEGAWIN and ABB, Hidkal Dam-Sadalaga-Nippani-BHEL, Galataga(Bhoj)-CGL in Chikkodi Div. Includes supply of materials/equipment, erection, civil works, testing & commissioning on Partial Turnkey Basis. Note:11KV Switchgear will be supplied by departmentally

GUARANTEED TECHNICAL PARTICULARS FOR U.G CABLES (11KV CABLES)

(Bidder should indicate the guaranteed technical data of all equipments/materials for each type of rating separately)

SL.NO PARTICULARS

1.1 Name of the contractor

1.2 Name of the sub-contractor, if any

1.3 Specification and standards

1.4 Design ambient temperature (deg. C)

1.5 Cable particulars

2.1 Name of the manufacturer

2.2 Place of manufacturer

2.4 Applicable specifications and standards

2.5 Voltage grade

2.6 Suitable for effectively earthed/unearthed system

2.6.1 Whether conductor screen insulation and insulation screen is manufactured by triple extrusion technique

2.7 permissible voltage and frequency variation for satisfactory operation

2.8 Continuous current carrying capacity

2.8.1 For standard conditions as per IS

2.8.2 For site conditions:

2.8.3 Deaerating factors for various conditions of laying are not worse than the ones specified in applicable IS.

2.8.4 Deaerating factors for fire resistance treatment

2.9.2 Shape of conductor

2.9.3 Nominal cross section area (sq.mm)

2.9.4 Number of wires

2.9.5 Diameter of wire(mm)

2.9.6 Diameter/size of conductor (mm)

2.1O Conductor screening

2.10.2 Material

2.10.3 Continuous working temperature (deg.C)

2.10.4 Maximum allowable temperature (deg.C) at temperatre of short circuit

2.11 Insulation

2.11.1 Material

2.11.2 Thickness of Insulation

1.Between cores(mm)

2.Between cores and inner sheath (mm)

2.11.3 Tolerance on thickness % of insulation

2.11.4 Diameter of core over mm insulation

2.11.5 Specific insulation ohm-cm resistance at 90 deg.C

2.11.6 Whether XLPE insulation gas cured or not

2.11.7 Whether XLPE insulation filled or unfilled

2.12 Insulation screening

2.12.1 Material

2.12.2 Thickness

1.Semi-conducting part (mm)

2.Metallic part (mm) (copper tape)

3.Size of copper tape

4.whether overlapping provided

5.Current carrying capacity

2.12.3 a)Continuously

b)For a short time of 1 sec.

2.12.4 Diameter of cable over(mm) screening

2.12.5 Whether insulation screen is removable without the application of heat.

2.13 Inner Sheath

2.13.1 Material

2.13.2 Extruded or wrapped

2.13.3 Thickness (mm)

2.13.4 Diameter of cable over inner sheath

2.14 Filler material

2.15.1 Material

2.15.2 Type of armouring

2.15.3 Diameter of wire/dimensions of strip (mm)

2.15.4 Whether galvanised

2.15.5 Diameter of cable over armouring

2.15.6 Current carrying capacity of armour

a)On continuous basis

b)Short time one sec. basis

2.16 Outer sheath

2.16.1 Material

2.16.2 Thickness of sheath (mm)

2.16.3 Tolerance on thickness of sheath (mm)

2.16.4 Overall diameter of cable (mm)

2.17 Scheme for identification

2.18 Short ciruit withstand capacity

2.18.1 Short circuit current (KA)

2.18.2 Duration of short circuit (Sec)

2.19 Allowable/attainable maximum conductor temperature when carrying continuously currents as per item 2.18 above (in Deg C)

2.2O Allowable/attainable maximum conductor temperature at the termination of short circuit current as per item 2.18 above (in Deg C)

2.21 Cable constants

2.21.1 DC resistance per core (ohm/km) at 20 deg.C

2.21.2 AC resistance per core (Ohm/Km) at operating temperature

2.21.3 Reactance per core (Ohm/km)

2.21.4 Capacitance per core (Ohm/Km)

2.21.5 Insulation Resistance at (Micro-twenty seven (27 deg.C) ohms/km)

2.21.6 Loss tangent

2.21.7 Dielectric constant

2.22 Maximum cable charging (A/km) current at normal operating voltage

2.23 Factory tests (Enumerate in detail for each type of cable)

2.24 Is the offered cable guaranteed to safely withstand continuous conductor temperature of 90 deg C and also to safely withstand temperature up to 130 deg C for a duration of one hundred (100) hours per year

2.25 Are the offered I/C cables guaranteed to perform satisfactorily under installation conditions specified. If yes, furnish relevant calculations in support including following data.

a)Induced voltage in the armour when Cable (500 m) carrying rated load V

Cable (500 m) carrying SC current V

b)Induced voltage and the circulating current in the copper tape when: Cable carrying rated load A Cable carrying SC Current A

c)maximum continuous and short time(1 sec) voltage withstand capability of inner pvc sheath of

d)Maximum continuous and short time(1sec)voltage withstand capability of outer most pvc sheath over the armour.

e)Maximum continuous and short(1 sec) current carrying capability of copper tape screen

2.26 Recommended minimum bending radius(mm)

2.27 Safe Pulling force(kg)

2.28 Cable Weight(kg/km)

2.29 Length of cable per drum(m)

2.29.1 Net weight(kg)

2.29.2 Drum weight(kg)

2.29.3 Transport weight(kg)

2.3O Can the insulation screen and the armour be connected together at both ends and grounded at both ends permanently. If not can the grounding be done at one end and the insulation screen only grounded at the other end and the cable inner and outermost sheaths withstand voltage under short circuit conditions at the open end.

3 1) Continuous current rating of the cable

a) In ground at soil temperature 30°C and soil thermal resistivity of 150°C cm/watt and depth of burial about a metre (A)

b) In air at 40°C (A)

c) Overload capacity and duration (A, Hr)

d) Derating Factors for :

i) Soil temperature and thermal resistivity

ii) Ambient temperature

iii) Single core cables laid in trefoil circuits

2) General Technical Data (Power cables)

2.1) Equivalent star impedance per km of 3 Ph, circuit at power frequency at maximum conductor temperature (Ohm)

2.2) Maximum electrostatic capacitance per core per km of cable (F)

2.3) Maximum charging current per conductor per km at nominalvoltage (A)

2.4) Loss tangent at normal frequency and rated voltage

2.5) Maximum dielectric loss of cable per km at normal voltage and frequency Watts/km

2.6) Short circuit capacity for 1 Sec. KA (rms)

2.7) Short Circuit current capacity of armour (kA for 1 sec)

2.8) Maximum dielectric stress at core screen (kV/cm)

2.9) Maximum overall dia. of cable (mm)

3.0) Construction details including type of material used and thickness of each material for each type of cable in a tabular form.

Date 30.03.2025 Name

Place Udupi Designation

Name of the Company

KARNATAKA POWER TRANSMISSION CORPORATION LIMITED

Tender Enquiry No:KPTCL/2026-27/SS/WORK_INDENT4230

Combined package for, Replacement of old 11KV MCVCB SWGs at 110KV S/s Sankeshwar AREVA, Ainapur MEGAWIN and ABB, Hidkal Dam-Sadalaga-Nippani-BHEL, Galataga(Bhoj)-CGL in Chikkodi Div. Includes supply of materials/equipment, erection, civil works, testing & commissioning on Partial Turnkey Basis. Note:11KV Switchgear will be supplied by departmentally

GUARANTEED TECHNICAL PARTICULARS FOR STATION AND YARD LIGHTING

(Bidder should indicate the guaranteed technical data of all equipments/materials for each type of rating separately)

LIGHTING SYSTEM: (Lighting Fixtures & Accessories (Data to be submitted separately for each type and size)

1 Manufacturer's Name and country of manufacture

2 Country of manufacturer for

3 Applicable standards for

4 Manufacturer's type and catalogue No. for

5 Nominal working voltage (volts)

6 Maximum permissible supply voltage variation for satisfactory operation of

a)fixtures(+,- O/L)

b)Accessories(+,- O/L)

7 Power factor at nominal working voltage and frequency

8 Full Load input current at Nominal working voltage (Amps)

9 Power loss per ballast at nominal working voltage and frequency (watts)

10 Maximum hot spot temperature of ballast case (0C)

11 Maximum average ballast winding Temperature(0C)

12 Ambient temperature within the fitting in continuous operation at the design ambient air temperature (0C)

13 Insulation class of ballast winding (0C)

14 Average life expectancy of

15 Lamp output at the design temperature

a)After 100 burning hours (Lumens)

b)After 1000 burning hours(Lumens)

16 lamp output at the end of the Expected life period (Lumens)

17 Average light output of the fitting as a percentage of lamp output

a)Downwards (%)

18 Beam angle for flood lights in

a)Horizontal plane (Degrees)

b)Vertical plane (Degrees)

19 a)Cable/Conduit entry size

b)Size and type of cable

20 Earthing terminal

b)Suitable for earthing conductor of size

21 Weights of Fixtures(kg)

22 a)Starting current & P.F for lamp (Amps)

b)Operating current (Amps)

c)Time Vs Mains current & P.F characteristics during starting enclosed (yes/No)

Reference cat No.

Conduits & Accessories (For each type & size)

1 Manufacturers name and country of manufacture

2 Manufacturers type designation

3 Applicable standards

4 Whether descriptive pamphlet is enclosed yes/no

Junction Boxes(For each type & size)

1 i)Manufacturer's name and country of manufacture

ii)Manufacturer's type designation

iii)Material specification

iv)Type of enclosure

b)Current rating (Amps)

c)Voltage rating (Volts)

d)Stud type (Yes/No)

e)Complete with insulated Barriers(yes/no)

vi)Whether descriptive pamphlet is enclosed? (Yes/no)

Lighting panels(for each type & size)

a)Manufacturers name and country of manufacture

b)Indoor/Outdoor applications

c)Design ambient air temp (0C)

d)Thickness of sheet steel(mm)

e)Degree of protection provided(as per IS:2147 or equivalent)

f)Bill of material for various Equipment giving make, type Rating., etc. enclosed(yes/no)

g)Colour of finish paint

ii. Temp rise at rated current over specified ambient (500c)

iii. Continuous current rating at 500C

iv. Whether suitable for one second current rating of 5 KA, A.C or 4KA, DC As applicable (yes/No)

v. Cross section

vi. Application standard

i)Control wiring

i. Material of conductor

ii. Size of conductor/dia of wire(2)

j)Conductor - solid/stranded

k)Terminal blocks

ii. Current rating

a)Power terminals (Amps)

b)Other terminals(Amps)

l)All tests are specified in specifications will be carried out (yes/no)

2 Air Break Switches (for each type of size)

a)Manufacturers name and country of manufacture

b)Manufacturers type description

c)Applicable standard

d)Rated voltage(volts) & frequency(Hz)

e)Rated current (Amps)

f)Rated Breaking current (Amps)

g)Maximum through fault current withstand derating factor for use under site ambient conditions

h)Temperature rise of contacts when carrying continuous rated current under site conditions (0C)

3 Fuses (For each type & size)

a)Manufacturers name and country of manufacture

b)Manufacturers type description

c)Applicable standard

d)Rated voltage(volts)

e)Rated current (Amps)

f)Whether fuse is mounted in an insulated carrier (Yes/No)

g)Whether fuse carrier has an Aperture for fuse failure indication (Yes/No)

h)Category of duty (IS:2208)

i)Rupturing capacities(Prospective Current)(KA)

j)Maximum led through current for 1sec(KA)

k)Whether time/current characteristics are enclosed (Yes/No)

4 Miniature Circuit Breaker(for each type and rating)

a)Manufacturers name and country of manufacture

c)Rated Voltage

f)Current Rating

i)Continuous at 50 degC Ambient(Amps)

ii)1 sec (KA rms)

g)Breaking capacity/single pole/Double Pole/Tripple pole)

i)Symmetrical (KA rms at volts)

ii)Asymmetrical (KA rms at volts)

h)Total interrupting cycle time

i)Type of blowout device

j)Type of overload(thermal/magnetic)

k)Terminal suitable for cable size pole/Tripple pole

l)Upto what fault current Discrimination between incomer fuse & M.C.B will be obtained

m)Miniature breaker conform to

5 Contactors(For each type DC/AC size)

a)Manufacturers name and country of manufacture

b)Rated voltage & permissible variation(volts)

c)Rated Burden(V.A)

d)Rated current(thermal) of main contacts

e)No. & type of Aux. contacts(if any)

f)Rated voltage of coil(volts)

g)Pick up voltage

h)Rated duty class

i)Drop off voltage

j)Applicable standard

Lighting Wires(For each Type & size)

1 Manufacturers name and country of manufacture

2 Standards applicable

3 Rated volatage(volts)

4 Continuous current rating when laid in conduit in an ambient Temperature of 50 degC (Amps)

b)Nominal cross sectional area (mm2)

c)Number & diameter of wires(No/mm)

a)Composition of insulation

b)Thickness of insulation

c)Tolerance on thicknes of insulation

d)Specific insulation resistance at 60 degC

7 Colour scheme for identification of wires

8 Whether descriptive pamphlet is enclosed yes/no

Painting, Printer, Finish Coat

1 Paints(for each type)

a)Manufacturers name and country of manufacture

b)Manufacturers type designation/brand name

2 Number of coats provided for

a)Junction Boxes

3 Applicable standards

4 Name and address of the contractor sub-contractor who shall supply, install and commision the lighting system in accordance with the Technical specifications

Place Designation

Name of the Company

KARNATAKA POWER TRANSMISSION CORPORATION LIMITED

Tender Enquiry No:KPTCL/2026-27/SS/WORK_INDENT4230

Combined package for, Replacement of old 11KV MCVCB SWGs at 110KV S/s Sankeshwar AREVA, Ainapur MEGAWIN and ABB, Hidkal Dam-Sadalaga-Nippani-BHEL, Galataga(Bhoj)-CGL in Chikkodi Div. Includes supply of materials/equipment, erection, civil works, testing & commissioning on Partial Turnkey Basis. Note:11KV Switchgear will be supplied by departmentally

GUARANTEED TECHNICAL PARTICULARS FOR MCVCB 11KV SWITCH GEAR (Wherever applicable)

(Bidder should indicate the guaranteed technical data of all equipment/materials for each type of rating separately)

SL.No 11 KV Switchgear

1 Type of Instrument

3 Whether Magnetically Shielded or not

4 Scale Length & Range

5 Whether Tropicalised

6 Short Time overload Capacity

7 VA Burden Current Coil/Potential Coil

8 Power Consumption Current Coil/Potential Coil

9 ISS Grade of Accuracy

10 Description Leaflet Ref.No

11 Temp. at which instruments are Calibrated

ADDITIONAL INFORMATION FOR W.H.METERS

2 Starting Watts at Unit PF

4 Limits of error at Unit PF &

a)125%-25% rated current

b)10%- rated current

c)5%- rated current

1)125%-25% rated current

2) 10%-4% rated current

1 Type and particulars of window

2 Particulars of Wiring

3 Rated Voltage

4 Power Consumption

5 Instantaneous Making Capacity of Contacts

6 Breaking Capacity

7 Overall Dimensions of Annunciation Group

8 Descriptive Leaflet Schematic Diagram

PROTECTIVE RELAYS

1 Non Directional IDMT/INST . OCR/EFT Relays

b)Current Coil Rating

e)Power Consumption

f)Time of Operation at Max.Dia setting at

i)5 times tap setting current

ii)10 times tap setting current

g)Type of Characteristics

h)Whether drawout type or not

i)Whether seal in contacts provided or not

DIRECTIONAL OVER CURRENT RELAY

b)Current Coil Rating

e)Min.Voltage at whichRelay operation

f)Time of Operation at Max.Dia setting at

i)5 times tap setting current

ii)10 times tap setting current

g)Type of Characteristics

h)Whether drawout type or not

i)Trip contact rating Amps

j)Whether Seal in Contacts provided or not

CIRCUIT BREAKER

a)Number of poles

b)Rated voltage

c)Normal Current

e)Making Capacity in Peak KA

f)Breaking Capacity

i)Symmetrical in KA & MVA

ii)Asymmetrical

iii)The Max. capacity of the capacitor bank for which the breaker is designed to open

g)Short time Current in KA

h)Operating Duty

II S.C.TEST CERTIFICATE

III CONSTRUCTIONAL FEATURES

a)Number of brakes in Circuit per pole

b)Total Length of Break Per pole

c)Type of Main Contacts

d)Type of Arcing Contacts

e)Type of Arc Control Device

f)Min.Clearance between:

i)Between Live Parts

ii)Between Live Parts & Earth

g)Min Clearance in VCB:

i)Between Live Parts

ii)- do - & Earth

h)Mechnical Endurance

i)Electrical Endurance

j)Method of closing mechanism

i)Type of Operating Mechanism

ii)Whether hand or Power or both

iii)Whether the breaker is designed to close & latch making or is fitted with making current release

iv)Whether the breaker if trip free

v)Time required to charge the spring

vi)Details of spring charging motor power required at designed normal voltage

k)Normal voltage of shunt Trip coil

l)Power required at Normal voltage in VA

IV OPERATING PARTICULARS

a)Operating Time in Mile Secs

b)Arc Duration at:

10% SC Breaking Current

c)Speed of Break at

10% SC Breaking Current

V CURRENT TRANSFORMER

e)Accuracy class as er ISS

VI POTENTIAL TRANSFORMER

d)Accuracy Class

VII AUXILLIARY TRANSFORMER

d)Details of OFF load taps

d)Storage time after AC Supply failure

e)Number of tripping/closing after AC supply failure

CONTROL CABINET:

1 Manufacturer's Name

2 Indoor/Outdoor application

3 Design ambient air temperature (0C)

4 Standards applicable

5 Thickness of sheet steel(mm) and whether cold rolled or hot rolled.

6 Degree of protection provided

7 Bill of material for all the equipment mounted on control cabinet giving the following details:

b)Applicable Standard

c)Voltage rating

d)Current rating

e)Duty class, if applicable

f)manufacturer's catalogue No.

g)Total heat load of cabinet(for purpose of ventilation requirement)

8 Colour of finish paint IS:5

9 Control Wiring

a)Size of Conductor

i)for CT circuits

ii)for other circuits

b)Conductor Solid/Stranded

c)Number of Strands/conductor

10 Terminal Blocks

b)Current rating

i)Power terminals(A)

ii)Other terminals(A)

11 Space Heater Rating at 240V AC

12 Control cabinet drawing showing the following

a)Outline dimensions, floor openings,floor/wall/pedestal fixing arrangements.weights etc.,

b)Front view, inside view showing the mounting arrangement of various equipment

13 Schematic/wiring diagram of control cabinet Enclosed

14 Interconnection drawing showing cable, connections to the control cabinet enclosed

15 Type test report to verify degree of protection enclosed

16 Details of terminal rows:

i)Whether arranged vertical or horizontal

ii)Clearance from adjacent components

iii)Distance between rows

iv)Whether transparent protection cover provided

SUPPORT INSULATOR

1 Manufacturer's Name

3 Applicable Standards

ii)Diameter(Top)

iii)Diameter(Bottom)

5 Total Creepage distance (mm)

6 Rated Voltage (KV)

7 Power frequency withstand voltage for 1min.(KV rms) dry and wet

8 1.2/50 micro sec. Impulse withstand voltage (KVp)

9 250/2500 micro sec. Switching impulse withstand voltage (KVp) dry and wet

10 Corona Extinction voltage (KV)

12 Max. allowable span (mm)

13 Cantilever Strength (kg)

14 OGA drawing enclosed

TERMINAL CLAMPS AND CONNECTORS

1 Manufacturer's Name

2 Applicable Standards

4 Material of connector

c)Spring washers

5 Rated Current

6 a)Rated terminal load(kg)

b)Factor of safety

7 Minimum thickness of any part (mm)

8 Weight of clamp complete with hardware(kg)

9 Type test reports as per IS enclosed

10 OGA drawing enclosed

Place Designation

Name of the Company

KARNATAKA POWER TRANSMISSION CORPORATION LIMITED

Combined package for, Replacement of old 11KV MCVCB SWGs at 110KV S/s Sankeshwar AREVA, Ainapur MEGAWIN and ABB, Hidkal Dam-Sadalaga-Nippani-BHEL, Galataga(Bhoj)-CGL in Chikkodi Div. Includes supply of materials/equipment, erection, civil works, testing & commissioning on Partial Turnkey Basis. Note:11KV Switchgear will be supplied by departmentally

Tender Enquiry No:KPTCL/2026-27/SS/WORK_INDENT4230

ISOLATORS AND TERMINAL CONNECTORS (Wherever applicable)

(Bidder to indicate technical data for each type of rating separately)

Isolators and Terminal connectors ratings 220KV 220KV 110KV 110kV 66kV 66kV 11kV

a. Name of the Manufacturer

b. Country of Manufacture

c. Manufacturer's type designation

d. Standard applicable for isolators and earthing switches

e. Rated Voltage Ur (kV)

f. Rated Current Under site conditions (A) at 50oC ambient

g. Rated frequency (Hz)

h. Number of poles

i. Whether all 3 poles are ganged mechanically

j. Pole to pole spacing

k. Type of installation

2 Guaranteed Ratings

a. Rated short time current of isolator for Is (kA) and dynamic current (kAp)

b. Opening time of isolator and earth switch (s)

c. Closing time of isolator and earth switch (s)

d. Temperature rise over 50oC ambient temperature corresponding to maximum continuous current (oC)

3 Dielectric withstand capacity of completely assembled isolator/isolator and earth switch

a. One minute dry power freq. Withstand test voltage (kV ms)

i. Against ground (kV rms)

ii. Across isolating distance (kV rms)

b. 1.2/50 micros a impulse withstand test voltage

i. Against ground (kVp)

ii. Across isolating distance (k Vp)

c. 250/2500 micros switching surge withstand test voltage (dry & wet)

i. Against ground (kVp)

ii. Across isolating distance (kVp)

d. Corona extinction voltage (k V rms)

e. Radio interference level at 1.1 Ur/ /3 (in micro volts) at 1.0 MHz

f. Total creepage distance to ground (mm)

4 Operating Mechanism

A. For Main Blades

a. Type of motor operating / manually driven mechanism

b. Manufacturer's Type / designation

c. Rated torque of the mechanism

d. Type and rating of motor

B. For Earth Switches

a. Type of motor operating / manually driven mechanism

b. Manufacturer's type designation

c. Rate troque of the mechanism

d. Type and rating of motor

4.1 Interlocks:

a. Whether mechanical/constructional interlock between isolator and earth switch provided.

b. Details of electrical interlock enclosed for

ii. Earth Switch

c. Arrangement provided to prevent electrical or manual operation unless interlock conditions are satisfied whether interlock coil is continuously rated

d. Rated DC control voltage and variation allowed

e. Power consumption (W)

a. Rated DC control voltage (V)

b. Limits of voltage

c. Power consumption of control coils (W)

5 Constructional Features

a. Minimum clearance in air

i. Between phases (mm)

ii. Between live parts to earth (mm)

iii. Distance between terminals of same phase (mm)

b. Whether position of earth switch can be interchanged at site to either side of pole

c. Minimum clearance between live part and earth switch blade throughout the entire operational are of earth switch (mm)

d. Terminal pad details

i. Diameter & length

ii. Material of pad

e. Insulator data

iii. No. of insulator stacks / phase

iv. No. of insulators/stack

f. Main Contracts

i. Type of contacts

ii. Contract area (cm2)

iii. Material of contacts

iv. Contact pressure (kg / cm2)

v. Maximum current density under normal current carrying capacity (A/cm2)

vi. Thickness of silver plating

g. Number of auxiliary contacts on isolator/pole for owner's use

h. Number of auxiliary contacts on earth switch pole for Owner's use

i. Auxiliary contacts

i. Rated voltage (V)

ii. Rated Continuous current (A)

iii. Rated Dc breaking current with 20 ms time constant (A)

j. Mounting dimenstions of isolators

i. Distance between supports

ii. Top dimensions of support

k. Height from mounting plane to top of terminal stud

l. Whether cable glands required included in the scope for inter pole cabling to be done by the Owner.

Whether the following are enclosed :

a. Type test reports as per IEC 129

b. OGA drawings for isolator with & without earth switches

c. Operation manual for isolators

d. Details of motor operating / manually driven mechanism

e. Recommended drawing for mounting details for isolator and drives.

f. Leaflets & literature bringing out salient features of equipment offered.

g. Details of constructional interlock

CONTROL CABINETS

1 Manufacturer's Name

2 Indoor / Outdoor application

3 Design ambient air temperature (oC)

4 Standards applicable

5 Thickness of sheet steel (mm) and whether cold rolled or hot rolled

6 Degree of protection provided

7 Bill of material for all the equipment mounted on control cabinet giving the following details :

a. Make and Type

b. Applicable Standard

c. Voltage rating

d. Current rating

e. Duty class, if applicable

f. Manufacturer's catalogue No.

g. Total heat load of cabinet (for purpose of ventilation requirement)

8 Colour of finish paint IS : 5

9 Control Wiring

a. Size of conductor

i. For CT circuits

ii. For other circuits

b. Conductor Solid / Stranded

c. Number of Stranded/conductor

10 Terminal Blocks

b. Current rating

i. Power terminals (A)

ii. Other terminals (A)

11 Space Heater Rating at 240 V DC

12 Control cabinet drawing showing the following

a. Outline dimensions, floor opening, floor/wall/pedestal fixing arrangements weights etc.,

c. Front view, inside view showing the mounting arrangement of various equipment

13 Schematic / wiring diagram of control cabinet enclosed

14 Interconnection drawing showing Owner's external cable, connections to the control cabinet enclosed Isolators & Terminal Connectors

15 Type test report to verify degree of protection enclosed.

16 Details of terminal rows

i. Whether arranged vertical or horizontal

ii. Clearance from adjacent components

iii. Distance between rows

iv. Whether transparent protection cover provided.

16 TERMINAL CLAMPS AND CONNECTORS

1. Manufacturer's Name

2. Applicable Standards

4. Material of connector

b. Bolts & Nuts

c. Spring washers

5. Rated Current

6. a. Rated terminal load (kg)

b. Factor of safety

7. Minimum thickness of any part (mm)

8. Weight of clamp complete with hardware (kg)

9. Type test reports as per IS enclosed.

10. OGA drawing enclosed

BUSHING / SUPPORT INSULATOR

1 Manufacturer's Name

2 Type test report to verify degree of protection enclosed.

3 Applicable Standards

i. Diameter (Top)

ii. Diameter (Bottom)

5 Total Creepage distance (mm)

6 Rated voltage (kV)

7 Power frequency withstand voltage for 1 min. (k V rms) dry and wet

8 1.2/50 micro sec. Impulse withstand voltage (kVp)

9 250/2500 micro sec. Switching impulse withstand voltage (kVp) dry and wet

10 Corona Extinction voltage (k V)

12 Max. allowable span (mm)

13 Cantilever Strengthh (kg)

14 OGA drawing enclosed

Place Designation

Name of the Company

KARNATAKA POWER TRANSMISSION CORPORATION LIMITED

Tender Enquiry No:KPTCL/2026-27/SS/WORK_INDENT4230

Combined package for, Replacement of old 11KV MCVCB SWGs at 110KV S/s Sankeshwar AREVA, Ainapur MEGAWIN and ABB, Hidkal Dam-Sadalaga-Nippani-BHEL, Galataga(Bhoj)-CGL in Chikkodi Div. Includes supply of materials/equipment, erection, civil works, testing & commissioning on Partial Turnkey Basis. Note:11KV Switchgear will be supplied by departmentally

GUARANTEED TECHNICAL PARTICULARS FOR SURGE ARRESTORS

(Bidder should indicate the guaranteed technical data of all equipments / materials for each type of rating separately)

Surge Arrestors 198kV 96kV 60kV 9KV

SURGE ARESOTORS

a. Manufacturer's Name

b. Manufacturer's type / designation

c. Applicable standards

ELECTRICAL CHARACTERISTICS

2 A. Arrester class and Type

b. Rated arrester voltage (kV)

c. Maximum continuous operating voltage (COV) at design ambient temeprature

d. Nominal discharge current (8/20 micro sec. Wave) (kA)

e. i. Minimum discharge capacity (kJ/kV) referred to rated voltage of minimum of discharge characteristics

ii. Line discharge class, as per IEC

f. Maximum equivalent front of waver protection level (discharge voltage with 0.5 * 1.5 micro sec, 10 kA impulse current).

g. i. Minimum switching surge residual voltage at 1 kA (kV p)

ii. Maximum switching surge residual voltage at 1 kA(kVp)

h. Maximum residual voltage for 8/20 micro sec. Current wave

i. At 50% nominal discharge current (kVp)

ii. At 100% nominal discharge current (kVp)

iii. At 200% nominal discharge current (kVp)

i. One minute power frequency (dry) withstand Voltage of arrester (k Vrms)

j. Impulse withstand test voltage of arrester housing with 1.2/50 micro sec. Wave (kVp)

k. Impulse current withstand

i. High current short duration (4/10 micro sec. Wave) kAp

ii. Low current long durationn (A peak)

l. Maximum internal ionisation at 50 Hz voltage equal to

m. Reference voltage and corresponding reference current of arrester.

n. Maximum internal leakage current at (mA).

iii. COV at 150oC

iv. Reference voltage

o. Pressure relief class

p. Are the protection levels affected by pollution of external insulation

q. Energy absorption capacity in kJ per operation of the arrester, during a switching surge discharge.

r. Maximum amount of energy that may be dispatched into the arrester during discharge into the arrester during discharge assuming that discharge takes place within 1 min period and state the switching surge current.

s. Internal pressure required to operate pressure relief device as a percentage of burst pressure of porcelain

t. Dynamic over voltage withstand kVp

ii. For 0.01 sec.

iii. For 0.1 sec.

u. Minimum prospective symmetrical fault current (kA rms)

v. Rejection rate of ZnO blocks during manufacturing and operation for the past three years (%) seperately

w. Rated voltage of ZnO disc (kV)

i. No. of ZnO discs in a unit

ii. No. of units/arrester

iii. Height / Thickness of ZnO discs 9(mm)

iv. Diameter of ZnO disc. (mm)

3 EXTERNAL INSULATION

b. Applicable standard

c. Impulse voltage withstand test voltage of housing with 1.2 / 50 micro sec wave (kVp)

d. One minute power frequency withstand voltage of arester housing dry and wet (kv rms)

e. Total creepage distance of arrester housing (mm)

f. Cantilever strength of complete arrester (kg)

4 OVERALL DIMENSIONS

A. Overall dimensions

i. Overall Height (mm)

ii. Height upto top of terminal pad from mounting plane

iii. Material of terminal pad

iv. Size of terminal pad

v. Mounting dimensions and diameter of mounting holes

vi. Diameter of insulator

b. Total weight of complete arrester (kg)

TERMINAL CLAMPS AND CONNECTIONS

1 Manufacturer's Name

2 Applicable Standards

4 Material of connector

b. Bolts & Nuts

c. Spring washers

5 Rated Current

6 a. Rated terminal load (kg)

b. Factor of safety

7 Minimum thickness of any part (mm)

8 Weight of clamp complete with hardware (kg)

9 Type test reports as per IS enclosed

10 OGA drawing enclosed.

BUSHING / SUPPORT INSULATOR

1 Manufacturer's Name

3 Applicable Standards

ii. Diameter (Top)

iii. Diameter (Bottom)

5 Total Creepage distance (mm)

6 Rated voltage (kV)

7 Power frequency withstand voltage for 1 min. (k Vrms) dry and wet

8 1.2/50 micro sec. Impulse withstand voltage (kVp) dry and wet

9 250/2500 micro sec. switching impulse withstand voltage (kVp) dry and wet

10 Corona Extinction voltage (kV)

12 Max. allowable span (mm)

13 Cantilever Strength (kg)

14 OGA drawing enclosed.

Place Designation

Name of the Company

KARNATAKA POWER TRANSMISSION CORPORATION LIMITED

Tender Enquiry No:KPTCL/2026-27/SS/WORK_INDENT4230

Combined package for, Replacement of old 11KV MCVCB SWGs at 110KV S/s Sankeshwar AREVA, Ainapur MEGAWIN and ABB, Hidkal Dam-Sadalaga-Nippani-BHEL, Galataga(Bhoj)-CGL in Chikkodi Div. Includes supply of materials/equipment, erection, civil works, testing & commissioning on Partial Turnkey Basis. Note:11KV Switchgear will be supplied by departmentally

GUARANTEEED TECHNICAL PARTICULARS FOR LATTICE TYPE MOUNTING STRUCTURES

(Bidder should indicate the guaranteed technical data of all equipments / materials for each type of rating separately)

Mounting Structures

1 Standars adopted

i. Properties of section

ii. Bolts & Nuts

iii. Galvanising

2 Minimum Sheared edge distance (mm)

3 Minimum Rolled edge distance (mm)

4 Quality of Zinc used for galvanising

5 Maximum percentage increase in structure weight due for galvanisation

6 Quantity of Zinc required for galvanisation per MT of structurals

7 Size of bolts and nuts (including foundation bolts & nuts for support structure)

iii. Foundation Bolts

Place Designation

Name of the Company

KARNATAKA POWER TRANSMISSION CORPORATION LIMITED

Tender Enquiry No:KPTCL/2026-27/SS/WORK_INDENT4230

Combined package for, Replacement of old 11KV MCVCB SWGs at 110KV S/s Sankeshwar AREVA, Ainapur MEGAWIN and ABB, Hidkal Dam-Sadalaga-Nippani-BHEL, Galataga(Bhoj)-CGL in Chikkodi Div. Includes supply of materials/equipment, erection, civil works, testing & commissioning on Partial Turnkey Basis. Note:11KV Switchgear will be supplied by departmentally

GUARANTEED TECHNICAL PARTICULARS FOR RIGID BUS & ACCESSORIES

(Bidder should indicate the guarantteed technical data of all equipments/materials for each type of rating separately)

Rigid Bus 220kV 110kV 66kV 33kV

1.00 Tabular Bus Conductor

1.01 manufacturers Name and address

1.01 Applicable Standards

1.03 Size of tubular Bus Conductor (mm)

a Standard pipe size (IPS)(mm)

b Outside diameter (mm)

c Tolerance on outside diameter

d Thickness (mm)

e Tolerance on Thickness

1.04 Moment of Interia (mm4)

1.05 Section Mudulus (mm3)

1.06 Radius of gyration (mm)

1.07 Natural frequency of vibration for the Site condition (c/s)

1.08 Reactance per phase for configuration at site (ohms)

1.09 Conducivity of IACS (%)

1.10 DC Resistance of 2033

1.11 Constant mass temperature co-efficient of resistance

1.12 Weight (Kg/m)

1.13 Current rating at site conditions (Amps)

1.14 Tubular bus conductor temperature Due short circuit (oC)

1.15 Final allowable tabular bus conductor Temperature due to short circuit (oC)

1.16 Short circuit current rating for 1 sec. duraion (kA)

1.17 Critical disruptive (Corona) voltage (Line o Neutral) KV)

1.18 Ratio inerference at rated voltage (micro volts m)

1.19 Yield srength at tensile stress of 1335 Kg/cm2 for aluminium tubular bus conductor (Kg)

1.20 Minimum braking strength at tensile stress of 1545 Kg/cm2 for aluminium tabular bus conductor (kg)

1.21 Deflection on tabular bus conductor for 13 span (mm)

1.22 Maximum transport length of tabular bus conductor (Meter)

1.23 Data Applicable to Bells

b Type of fiting (Internal/external)

2.00 Clamps and Connections 220 KV 110KV 66KV 33KV

2.01 Manufacturers Name and address

2.02 Applicable standards

2.03 Application

2.04 Type of fiting (Internal/external)

2.05 For connection to

a Conductor size and arrangement

b Equipment terminal and arrangement

2.06 Material (state percentage composiion of consiuents and impurities present)

b Bolts and Nuts

c Spring washers

d Liners, if any

2.07 Rated current (A)

2.08 Maximum temperature rise over reference ambient temperature when carrying rated current (oC)

2.09 Rated terminal load and factor of safey (Kg)

2.10 Minimum thickness of any part (mm)

2.11 Weight of clamp complete with hardware (Kg)

2.12 Machine accuracy for matting surface

2.13 Service (Indoor/Outdoor)

3.00 Marshalling Kiosk 220 KV 110KV 66KV 33KV

3.01 Manufacturers Name and address

3.02 Indoor/Outdoor application

3.03 Design ambient air temperature

3.04 Thickness of sheet steel (mm)

3.05 Degree of protection provided

3.06 Bill of material for all equipment mounted in marshalling Kiosks giving following details:

b Applicable Standards

c Voltage rating

d Current rating

e Duty class if applicable

f Manufacturers catalogue No.

g Total heat load of Kiosk (for purpose of ventilation requirement)

3.07 Colour of finish paint (as per IS:5)

3.08 Busbars 220KV 110KV 66KV 33KV

b Temperature rise at rated current over specified ambient temperature (o C)

c Continuous current rating (A)

d Short circuit current rating for one sec. (KA)

3.09 Control wiring

a Size of conductor (mm2)

i. For CT circuits

ii. For other circuits

b Conductor (solid/stranded)

3.10 Space Heater Rating at 240 V Ac

3.11 Marshalling Kiosk drawing enclosed showing the following:

a Outline dimensions floor opening Floor/wall pedestal fixing arrangements, weight etc. (YES/NO)

b Front view and inside view showing the mounting arrangments of various equipments. (YES/NO)

3.12 Schematic wiring diagram of marshalling kiosk enclosed (YES/NO)

3.13 Interconnecion drawing showing Employer's external cable connection to the marshalling Kiosk enclosed. (YES/NO)

3.14 Type test report to degree of protection enclosed.

3.15 Terminal blocks

a Make and type

b Current rating

i Power Terminal (A)

ii Outer Terminal (A)

GUARANTEED TECHNICAL PARTICULARS OF CLAMPS AND CORONA BELLS ASSOCIATED WITH ALUMINIUM PIPE:

2 Type of clamps, purpose and size of the pipe

3 Type of corona bell (internal fitting or external fitting)

4 Standards applicable

5 Material (state percentage composition)

ii Bolts and Nuts

iii Spring washers

6 Current rating (amps)

7 Maximum thickness of any part (mm)

8 Minimum thickness of any part (mm)

9 Size of bolts used in each case

11 List of type tests enclosed

12 Year in which type test conducted

13 List of routine tests conducted

14 List of drawings enclosed

Note: Pariculars in respect of different clamps may be furnished separately or in tubular columns in the annexure.

Place Designation

Name of the Company

KARNATAKA POWER TRANSMISSION CORPORATION LIMITED

Tender Enquiry No:KPTCL/2026-27/SS/WORK_INDENT4230

Combined package for, Replacement of old 11KV MCVCB SWGs at 110KV S/s Sankeshwar AREVA, Ainapur MEGAWIN and ABB, Hidkal Dam-Sadalaga-Nippani-BHEL, Galataga(Bhoj)-CGL in Chikkodi Div. Includes supply of materials/equipment, erection, civil works, testing & commissioning on Partial Turnkey Basis. Note:11KV Switchgear will be supplied by departmentally

GUARANTEED TECHNICAL PARTICULARS FOR POST INSULATORS AND INSULATOR STRING

(Bidder should indicate the guaranteed echnical data of all equipments/mzaterials for each type of rating separately)

Post Insulators & Disc String Insulators

1.00 POST INSULATORS 245KV 123KV 72.5KV 36KV

1.01 Manufacurer's name and Address

1.02 Type of Insulators Units

1.03 Applicable Standard

1.04 No. of Units per Sack

1.05 Whether corona ring provided or not (Yes/No)

1.06 Diameter (mm)

1.07 Bolt circle diameter (mm)

1.08 Spacing bewteen two units (mm)

1.09 Creepage Distance

b Protected (mm)

1.10 Power frequency wihstand volage of insulator

i. Dry (KV rms)

ii. Wet (KV rms)

b One complete stack

i. Dry (KV rms)

ii. Wet (KV rms)

1.11 1.2/50 micro sec.impulses withstand voltage

b Complete stack

1.12 Visual discharge volage for falling power frequency voltage for complete stack

1.13 Radio interference voltage of compete stack

i Test Voltage(KV rms)

ii Radio interference voltage (micro volt)

1.14 Weight of complete stack (Kg)

1.15 Cantilever Strength

ii Underhung (Kg)

b Complete stack

ii Underhung (Kg)

1.16 Tensile Strength (Kg)

1.17 Torsional Strength (Kg.m)

1.18 Compression Strength (Kg)

1.19 250/2500 micro second switching surge withstand voltage

i Dry (KV Peack)

ii Wet (KV Peack)

b Complete stack

i Dry (KV Peack)

ii Wet (KV Peack)

1.20 Whether shed profile of insulaor is conforming to IEC-815? (Yes/No)

1.21 Whether calculation characterising shed profile as per IEC-815 are enclosed with bid? (Yes/No)

1.22 Wheher offered BPI is alternate shed type?

1.00 INSULATOR STRINGS 220KV

1.01 Manufacturer's Name

1.02 Type of string

a Single/Double

b Suspension/Tension

1.03 Applicable standards

1.04 Type of Insulators

a Ball & socket/oher

b Whether fog type

1.05 Insulating Material

1.06 No. of unis per string

1.07 Size of each unit

a Diameter of disc (mm)

b Spacing between adjacent units (mm)

a Each disc (Kg)

b Complete String (mm)

1.09 Creepage Distance

a Each disc (mm)

b Complete String (mm)

1.10 power frequency withstand voltage of the complete string with corona control ring

1.11 Lightening impulse withstand voltage of the complete string for both positive and negative

1.12 Switching surge withstand voltage of the complete string with corona ring.

1.13 Power frequency puncture withstand voltage of each Disc (KV rms)

1.14 Electro Mechanical strength (KG) of each disc.

1.15 Minimum corona extinction voltage level of the complete string with corona ring (Dry condition)

1.16 RIV level of the complete string with corona control ring shall be below 1000 micro at 1 MHz when subjected to a test voltage indicated against clause 1.15 above. (Dry condition)

Place Designation

Name of the Company

KARNATAKA POWER TRANSMISSION CORPORATION LIMITED

Tender Enquiry No:KPTCL/2026-27/SS/WORK_INDENT4230

Combined package for, Replacement of old 11KV MCVCB SWGs at 110KV S/s Sankeshwar AREVA, Ainapur MEGAWIN and ABB, Hidkal Dam-Sadalaga-Nippani-BHEL, Galataga(Bhoj)-CGL in Chikkodi Div. Includes supply of materials/equipment, erection, civil works, testing & commissioning on Partial Turnkey Basis. Note:11KV Switchgear will be supplied by departmentally

GUARANTEED TECHNICAL PARTICULARS FOR INSULATOR HARDWARE AND CLAMPS

(Bidder should indicate the guaranteed technical data of all equipments/materials for each type of rating separately)

220KV 110kV 66kV

1.00 Insulator hardware

1.01 Manufacturer's Name and address

1.02 Applicable Standards

b Nuts bolts and washers

e Strain and suspension/drop clamp (kg)

1.04 Ultimate Strength

a Complete assembly (kg)

b Suspension /drop clamp (kg)

c Strain clamp (kg)

d D-shackle (kg)

e Ball eye (kg)

f Ball clevis (kg)

g Clevis eye (kg)

h Socket eye (kg)

I Socket clevis (kg)

j Yoke Plate (kg)

1.05 Magnetic power loss at

Place Designation

Name of the Company