Loading
Loading…
Loading…
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹23.4 LAdmitted-Finance | ₹23.4 L | L1 | Admitted-Finance |
| 2 | L2₹25.1 LAdmitted-Finance FLAT NO 4 VIRGINIA CO OP HOUSING SOCIETY AIR PORT ROAD CHICALIM VASCO DA GAMA GOA 403 711 | SOUTH GOA | GOA | 403711 | ₹25.1 L | L2 | Admitted-Finance |
| 3 | L3₹27.1 LAdmitted-Finance C2 PAIXOMONTIRO APTS BEHIND NSD ALTO DABOLIM VASCO DA GAMA GOA 403 801 | SOUTH GOA | GOA | 403801 | ₹27.1 L | L3 | Admitted-Finance |
| Sl No | Description | Qty | Unit | M/S P S BABU L3 | M/S jvsr constructions L2 | STAR FABRICATION L1 |
|---|---|---|---|---|---|---|
| 1.00 | Excavation in post holes(similar holes) each not exceeding 0.5 Cum, getting out, soft/disintegrated rock returning, filling in and ramming earth or broken rubble mixed with earth around in layers not exceeding 25cm watering, and removing surplus soil to a distance not exceeding 50m and making good surface complete all as specified and as directed. | 20 | EACH | 300 ₹6,000 | 450 ₹9,000 | 550 ₹11,000 |
| 2.00 | Material and labour for Plain Cement concrete 1:3:6, type C-2 using 40 mm graded stone aggregate as in foundations, filling and mass concrete etc complete all as specified and as directed. | 8 | CUBIC METRE | 5,500 ₹44,000 | 4,500 ₹36,000 | 5,600 ₹44,800 |
| 3.00 | Material and labour for mild steel single stanchions of square hollow section with flange plates, caps, bases, splices, angle brackets, cleats and other connecting accessories conforming to Fe.410-W, Gde-E-250, quality 'A' etc complete all as specified and as directed. | 800 | KILOGRAM | 140 ₹1,12,000 | 126 ₹1,00,800 | 155 ₹1,24,000 |
| 4.00 | Material and labour for mild steel rolled sections as in main and cross beams, hip and jack rafters, purlins where connected to common rafters and running rails and guides for sliding doors fixed with angle cleats or other connecting plates of Fe-290 (Gde E- 165) complete all as specified and directed | 2,000 | KILOGRAM | 130 ₹2,60,000 | 108 ₹2,16,000 | 145 ₹2,90,000 |
| 5.00 | Material and labour for applying two coats of synthetic enamel paints over a coat of red oxide primer to new steel surface, not otherwise described, over 10cm width or girth including preparation of new surface complete all as specified and as directed. | 250 | SQUARE METRE | 80 ₹20,000 | 90 ₹22,500 | 110 ₹27,500 |
| 6.00 | Material and labour for mild steel Plates (plain or chequered) channels, square cut or notched (ordinary and counter sunk) forming holes, without any attachment o FE -410W (Gde -E-250) Quality B complete all as specified and as directed | 200 | KILOGRAM | 160 ₹32,000 | 144 ₹28,800 | 150 ₹30,000 |
| 7.00 | Material and labour for Mild steel screw bolts (machine made) with hexagonal or square heads at one end and screwed the other, or screwed both ends, each screwed end to be fitted with washers an one hexagonal or square nut, exceeding 30cm long and diameter of neck exceeding 12mm, not exceeding 20mm complete all as specified and as directed | 150 | KILOGRAM | 180 ₹27,000 | 144 ₹21,600 | 150 ₹22,500 |
| 8.00 | Supply and fix Pre- painted galvalume aluminium zinc coating GI based corrugated steel sheet 0.50mm thick as per approved profile of any colour having tensile strength of 550 Mpa as in roof covering/ on Chajjas, fixed with self tapping screws or L type or J type or cranked hook bolts or as per manufacture instruction complete all as specified and as directed by Engineer-in-Charge | 400 | SQUARE METRE | 950 ₹3,80,000 | 900 ₹3,60,000 | 950 ₹3,80,000 |
| 9.00 | Supply and fix Pre- painted galvalume aluminium zinc coating GI based plain steel sheet 0.50mm thick as per approved profile of any colour having tensile strength of 550 Mpa as in roof covering/ on Chajjas, fixed with self tapping screws or L type or J type or cranked hook bolts or as per manufacture instruction complete all as specified and as directed by Engineer-in-Charge | 40 | SQUARE METRE | 900 ₹36,000 | 900 ₹36,000 | 900 ₹36,000 |
| 10.00 | Supply and fix 1.25 mm thick 100 mm dia Mild steel sheet eaves gutters, galvanised class 3, half round with rounded edges complete all as specified and as directed. | 80 | RUNNING METRE | 950 ₹76,000 | 540 ₹43,200 | 650 ₹52,000 |
Tender Value
₹19.3 L
EMD Value
₹38,600
Closing Date
20 Jun 2026, 6:00 pmClosed
GE (I) (CG) GOA
Garrison Engineer (I) (CG) Goa HQ Coast Guard DHQ-11 Chicolna PO- Bogmalo Goa 403806
PROVISION OF TWO WHEELER PARKING SHED ADJACENT TO PARADE GROUND OF DHQ-11 AND PROVISION OF FRAMED GLAZING FOR CG LAND UNDER GE (I) (CG) GOA
2026_MES_767437_1
8642/GOA/E8
Open Tender
Civil Works
180 days
GE (I) (CG) GOA
AS PER TENDER DOCUMENTS
8 documents required · 8 mandatory
₹500
GE (I) (CG) GOA
₹38,600
1 Jul 2026
23 May 2026
27 Jun 2026
23 May 2026
20 Jun 2026
6 Jun 2026
| Sl No | Description | Qty | Unit | Est. Rate | Est. Amount |
|---|---|---|---|---|---|
| 1 | Excavation in post holes(similar holes) each not exceeding 0.5 Cum, getting out, soft/disintegrated rock returning, filling in and ramming earth or broken rubble mixed with earth around in layers not exceeding 25cm watering, and removing surplus soil to a distance not exceeding 50m and making good surface complete all as specified and as directed. | 20 | EACH | 1.25 | ₹25 |
| 2 | Material and labour for Plain Cement concrete 1:3:6, type C-2 using 40 mm graded stone aggregate as in foundations, filling and mass concrete etc complete all as specified and as directed. | 8 | CUBIC METRE | 11 | ₹88 |
| 3 | Material and labour for mild steel single stanchions of square hollow section with flange plates, caps, bases, splices, angle brackets, cleats and other connecting accessories conforming to Fe.410-W, Gde-E-250, quality 'A' etc complete all as specified and as directed. | 800 | KILOGRAM | 1.25 | ₹1,000 |
| 4 | Material and labour for mild steel rolled sections as in main and cross beams, hip and jack rafters, purlins where connected to common rafters and running rails and guides for sliding doors fixed with angle cleats or other connecting plates of Fe-290 (Gde E- 165) complete all as specified and directed | 2,000 | KILOGRAM | 1.25 | ₹2,500 |
| 5 | Material and labour for applying two coats of synthetic enamel paints over a coat of red oxide primer to new steel surface, not otherwise described, over 10cm width or girth including preparation of new surface complete all as specified and as directed. | 250 | SQUARE METRE | 1.25 | ₹312.5 |
| 6 | Material and labour for mild steel Plates (plain or chequered) channels, square cut or notched (ordinary and counter sunk) forming holes, without any attachment o FE -410W (Gde -E-250) Quality B complete all as specified and as directed | 200 | KILOGRAM | 1.25 | ₹250 |
| 7 | Material and labour for Mild steel screw bolts (machine made) with hexagonal or square heads at one end and screwed the other, or screwed both ends, each screwed end to be fitted with washers an one hexagonal or square nut, exceeding 30cm long and diameter of neck exceeding 12mm, not exceeding 20mm complete all as specified and as directed | 150 | KILOGRAM | 1.25 | ₹187.5 |
| 8 | Supply and fix Pre- painted galvalume aluminium zinc coating GI based corrugated steel sheet 0.50mm thick as per approved profile of any colour having tensile strength of 550 Mpa as in roof covering/ on Chajjas, fixed with self tapping screws or L type or J type or cranked hook bolts or as per manufacture instruction complete all as specified and as directed by Engineer-in-Charge | 400 | SQUARE METRE | 10 | ₹4,000 |
| 9 | Supply and fix Pre- painted galvalume aluminium zinc coating GI based plain steel sheet 0.50mm thick as per approved profile of any colour having tensile strength of 550 Mpa as in roof covering/ on Chajjas, fixed with self tapping screws or L type or J type or cranked hook bolts or as per manufacture instruction complete all as specified and as directed by Engineer-in-Charge | 40 | SQUARE METRE | 11 | ₹440 |
| 10 | Supply and fix 1.25 mm thick 100 mm dia Mild steel sheet eaves gutters, galvanised class 3, half round with rounded edges complete all as specified and as directed. | 80 | RUNNING METRE | 10 | ₹800 |
stage.html
html • 0.03 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Tendernotice_1.pdf
PDF • 0.42 MB
8642TENDERPAGES.pdf
Tender Documents • 0.81 MB
BOQ_859467.xls
BOQ • 3.98 MB
Download all tender documents and submit your bid