Loading…
Tenderkart now works inside Claude and ChatGPT: search and analyse tenders right from your chat
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹42.9 LAccepted-AOC | L1 | Accepted-AOC Accepted | |
| 2 | L2₹46.5 L+₹3.0 L (6.86%)Rejected-Finance | L2 | Rejected-Finance Not lowest | |
| 3 | L3₹46.7 L+₹3.2 L (7.43%)Rejected-Finance SREE COLONY BAGDOGRA PO BAGDOGRA DIST DARJEELING WB | L3 | Rejected-Finance Not lowest | |
| 4 | L4₹47.0 L+₹3.5 L (8.01%)Rejected-Finance C O PULAK SAHA MAHAKAL PALLY SURYASEN PARK MAIN GATE SILIGURI 734001 DIST DARJEELING | JALPAIGURI | WEST BENGAL | 734001 | L4 | Rejected-Finance Not lowest | |
| 5 | L5₹47.4 L+₹3.9 L (8.99%)Rejected-Finance | L5 | Rejected-Finance Not lowest |
Tender Value
₹43 L
EMD Value
₹86,000
Closing Date
27 Aug 2022, 6:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
GE SEVOKE ROAD
GE Sevoke Road Post Salugara Dist Jalpaiguri PIN 734008
UPGRADATION OF SAMPLE ROOM AND SPL REPAIR AND REVENUE WORK AT SEVOKE STN UNDER GE SEVOKE ROAD
2022_MES_542864_2
GE/SEV/22 of 2022-23
Open Tender
Civil Works
Item Rate
GE SEVOKE ROAD
AS PER TENDER DOCUMENTS
8 documents required · 8 mandatory
₹500
Yes
GE SEVOKE ROAD
₹86,000
Yes
14 Oct 2022
13 Aug 2022
29 Aug 2022
13 Aug 2022
27 Aug 2022
22 Aug 2022
14 Aug 2022 - 17 Aug 2022
Amount
M&L for cleaning of inspection chambe/gully trap including flushing with water or pumping air complete all as specified and as directed.
M&L for cleaning of manhole any size and any depth complete including flushing water or pumping air complete all as specified and as directed.
Excavation in trenches n.exc 1.5 m wide and n.exc 1.5m in depth for foundation, shafts, wells, cesspits, manholes, pier holes etc n.exc 10 sqm on plan and getting out in soft / loose soil complete all as specified and as directed.
Excavation in trenches n.exc 1.5 m wide and exc 1.5m in depth but n.exc 3.0m for foundation, shafts, wells, cesspits, manholes, pier holes etc n.exc 10 sqm on plan and getting out in soft / loose soil complete all as specified and as directed.
Removal of surplus soil to a distance not exceeding 50m and depositing where directed at a level n.exc 1.5m above the starting point complete all as specified and as directed.
Returning,filling in,including spreading,levelling,watering and well ramming in layers not exceeding 25 cm thick all as specified and as directed.
Demolition and breaking up drain pipes 200mm bore (salt glazed stone ware, AC or reinforced concrete) set in cement mortar and removing from site of work to a distance n.exc 100 mtr complete all as specified and as directed.
Demolition and breaking up drain pipes 150mm bore (salt glazed stone ware, AC or reinforced concrete) set in cement mortar and removing from site of work to a distance n.exc 100 mtr complete all as specified and as directed.
Demolition and breaking up drain pipes 100mm bore (salt glazed stone ware, AC or reinforced concrete) set in cement mortar and removing from site of work to a distance n.exc 100 mtr complete all as specified and as directed.
M&L for PCC (1:3:6) type C2 (using 40mm graded crushed stone aggregate) as in bed for drainpipes of 200mm bore including packing under and haunching against the sides of pipes after they are laid and tested complete all as specified and directed.
M&L for PCC (1:3:6) type C2 (using 40mm graded crushed stone aggregate) as in bed for drainpipes of 150mm bore including packing under and haunching against the sides of pipes after they are laid and tested complete all as specified and directed.
M&L for PCC (1:3:6) type C2 (using 40mm graded crushed stone aggregate) as in bed for drainpipes of 100mm bore including packing under and haunching against the sides of pipes after they are laid and tested complete all as specified and directed.
S&F 200mm Internal Dia DWCPE pipes (SN-8) pipe ISI Marked laid in trenches and jointed complete all as specified and as directed.
S&F 150mm Internal Dia DWCPE pipes (SN-8) pipe ISI Marked laid in trenches and jointed complete all as specified and as directed.
S&F 100mm Internal Dia DWCPE pipes (SN-8) pipe ISI Marked laid in trenches and jointed complete all as specified and as directed.
S&F in position Gypsum Board False Ceiling as per manufacturer's specifications including all recesses and grooves whatsoever as per site requirement at desired height with 12.5 mm thick 'Gypboard' screw-fixed to the suspended G.I. grid from the main ceiling as per manufacturer's instructions. Framework sections shall be G.I. of 24 gauge. The Gypboard should be fixed to G.I. grid with 25 mm long drywall screws. The `Gypboard ' to be used should be 12.5mm thick tapered edge boards. The boards should be taped and filled from underside to give smooth, seamless ceiling. . Additional Intermediate channels should be fixed to strap hangers for additional support to prevent strap hangers from buckling/swaying at every 1200 mm bothways. Item to be completed in all respect including necessary sleeves for ducts and finishing of joints cut outs supports for A.C. grills, light fixtures, speakers etc complete all as specified and directed by the Engr-in-Charge (Note :- The rate should include necessary additional ceiling sections and intermediate channels and openings for light fixtures, A.C. ducts, vertical drops, offsets. etc also Fine quality spray painting along with putty to finish as per approved design/concept also include wastage complete)
S&F for providing and applying plaster of paris cornice of approved designs with screws and other necessary adhesives including spray painting to match the shade of ceiling etc complete all as specified and as directed by the Engr-in-Charge.
S&F PVC Sheet wall panelling of thickness 5 mm consisting of panels of desired size stuck on inner frame work of 50 mm wide strips of 5 mm thick prelam PVC sheet. The panel and strips shall be density of 600 Kg/Cbm manufacured by ISO-9001-2015 certified company. The strip should have in their corner of groove of 6 mm width and 1 mm depth for sinking the head of the screw used to fix the strips to the wall vertically at an equal interval of 10" between two PVC Strips. The PVC strip shall fixed to the wall using 65 mm long MS Scews through the groove in the strips by using PVC fastners. The distance between two screws shall not be more than 200mm. A groove of 2 mm may be left at the point of two panels for aesthetic looks. The exact size of the panel and correspondingly of the grid may vary depending on the size of the wall. Optionally a strip of 5 mm thick PVC sheet of width 75 mm fesibered at the edges shall be stuck at the places where two panels are joined, using solvent cement, as per manufactures instruction& specifications complete all as specified and directed.
S&F 12 mm thick frameless double leaf toughened glass door shutter of approved brand and manufacture, including providing and fixing top & bottom pivot and cover plates with brass pivot and single piece M.S sheet outer box with slide plate etc and making necessary holes etc for fixing required door fittings and lock, complete all as specified and as directed.
M&L for etching to 12 mm thick toughened glass by mechanical/manual means and making approved design/pattern/logo as directed by the Engineer in charge.
S & F for Double action floor spring hydraulically regulated made up of minimum 1.25 mm thick aluminium alloy sheet foundation box, main body with stainless steel cover, governing pivot made of brass, other parts made of mild steel heavy duty and fixed including cost of cutting floors, embedding in floors as required and making good the same matching to the existing floor finishing complete all as specified and directed by the Engr-in-Charge.
S&F of stainless steel door handles of size 450 mm of approved make complete all as directed by the Engineer-in-charge
S&F stainless steel 02 Lever door lock of approved make complete as per direction of Engineer-in-charge.
S & F Floor door stopper with overall length of cover plate 150 mm of aluminium alloy body and tongue, anodised, with hard drawn steel spring, fixed in floor complete all as specified and directed.
M&L for double charged vitrified ceramic tiles 8-10 mm thick dark shade (square/ rectangular) polished , area of each tile exceeding 0.42 sqm but not exceeding 1.5 Sqm with 5 mm spacers in floors etc, set and jointed in neat cement slurry and pointed in white or colured cement to match over and including 15mm thick cement mortar screed bed in CM 1:6 etc including dismantling of existing tiles and removing serviceable tiles to store complete all as specified and directed.
M&L for double charged vitrified ceramic tiles 8-10 mm thick light shade (square/ rectangular) polished area of each tile exceeding 0.42 sqm but not exceeding 1.5 Sqm with 5 mm spacers in floors etc, set and jointed in neat cement slurry and pointed in white or colured cement to match over and including 15mm thick cement mortar screed bed in CM 1:6 etc including dismantling of existing tiles and removing serviceable tiles to store complete all as specified and directed.
S&F 19 mm thick decorative plywood grade BWR type BB, fixed with screws to frame work as in decorative wall panelling, ceiling etc including frame work & beadings complete all as specified and as directed . Make of plywood : Green ply industries Ltd / Century / Archid
M&L for 03 or more coats of Melamine polishing of approved quality and shade to have desired , finish to all exposed surfaces of plywood panelling, beadings, board etc , incl preparation of surfaces by sand papering, and applying wood putty complete all as specified and directed.
Providing and fixing factory made uPVC white color Sliding window exc 2.00 Sqm Three track made of extruded profiles with wall thickness of 2.3mm (+- 0.2mm). Window profile with hollow section with multi chamber, Frame (60mm x 62mm). sash (42mm x 67mm). Sliding Interlock (One vertical length in each shutters)(45.5mm x 28mm). Glazing bead (24.5mmx 16mm) will be mitered cut and fusion welded at all corners, including drilling of holes for fixing hardware and drainage of water etc.. making arrangement for fixing of hardware. EPDM gasket 1.2 + -0.2mm thick galvanized steel frame (30mm x 21.5mm), Sash (30mm x 18mm), profile to be inserted in required profile,frame will be fixed to the wall with 8mm - 100mm long fasteners. Hardware : [Touch Lock of zinc alloyed (white powder coated), steel roller system including fixing of 5mm thick tinted glass, aluminum track on bottom rail for two track sliding frame, wool pine for Sliding sash and interlock.] (Note 1: The unit rate quoted by contractor excludes cost of glass and includes all hardwares and other connected accessories viz silicone sealant etc. Net opening will be measured for payment purpose). Note 2: Glass shall be measured separately as supply only)
Supply only 5mm thick tinted sheet glass, in squares exc 0.5 sq.m in each pane complete all as specified and as directed.
Taking down steel windows exc 1.5 sqm and n.exc 4.00 sqm of any description Complete all as specified and as directed.
S&F Aluminium powder coated , fixed type partition/Cubicles without sash bar, aluminium section weighing not less than 1.10kg/m including necessary joining cleats, glazing clips, rubber packing, anodised alumnium snap beading, screws including 5.50 mm thick tinted sheet glass etc. complete all as specified and directed by Engineer-in-Charge.
Demolition of brick work or stone/boulder masonry built in cement mortar or cement lime mortar including all quoins, arches, pillars, etc. but excluding ashlar facings, dressed stone work and precast concrete articles complete all as specified.
M&L for brick work with sub class 'B' brick straight or curved on plan exc. 6mtr mean radius, built in cement mortar 1:6, complete all as specified and directed.
M&L for brick work with sub class 'B' bricks in one and half brick thick honey comb walling, built in cement mortar 1:4, complete all as specified and directed.
M&L for rendering 15mm thick on fair faces of brick work or concrete surfaces in CM 1:6 including mixing WPC as per manufacturers instruction, finished even and smooth without using extra cement complete all as specified and as directed. Note : WPC shall be measured seperately.
Supply only integral water proofing compound complete all as specified and as directed.
Demolition of cement concrete (reinforced) as in cover slabs, culvert etc of any position not otherwise specifically provided complete all as specified and as directed.
M&L for precast RCC 1:2:4 type BI (using 20 mm graded crushed stone aggregate) as in cover slab set in CM 1:6 including necessary formwork complete all as specified and as directed.
M& L for Mild steel TMT bars 06 to 08 mm dia. cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9 mm dia or securing with clips complete all as specified and directed.
M& L for Mild steel TMT bars 10 mm dia. and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9 mm dia or securing with clips complete all as specified and directed.
Taking down 15 mm internal wall plastering including complete removal of existing surface complete all as specified and as directed.
Taking down 20 mm external wall plastering including complete removal of existing surface complete all as specified and as directed.
M&L for rendering 15mm thick in CM 1: 6 on fair faces of brick/concrete surfaces finished even & smooth without using extra cement complete all as specified and as directed.
M&L for rendering 20mm thick on fair faces of brick work or concrete surfaces in CM 1:4 including mixing WPC as per manufacturers instruction, finished even and smooth without using extra cement complete all as specified and as directed. Note : WPC shall be measured seperately.
M&L for preparation of new plastered surfaces of walls and applying three coats of white wash complete all as specified and directed. .
M&L for preparation of new surface of wall and applying two coats of whether coat exterior emulsion paint (of shade/colour as directed by GE) over one coat of primer all as per manufacture instruction including necessary scaffoldings etc complete all as specified and as directed.
Demolition of roofs, PCC floors (other than groud floors) beams, staircases, landing, chajjas and similar suspended work complete all as specified and as directed.
M&L for 75mm thick PCC (1:3:6) type C2 (using 40mm graded crushed stone aggregate) as in plinth protection/footpath, surface finished even & smooth without using extra cement including bitumen filler at joints complete all as specified and directed.
M&L for PCC 1:4:8, Type D-2 (using 40mm graded crushed stone agg) as in foundation, filing in manhole bottom and mass concrete complete all as specified and as directed.
Taking down eaves gutters and rainwater pipes (any size or patern) including all fittings heads, shoes, bends, swan-neck etc including cleaning or re-fixing or removal to store (measured overall as fixed along the centre line over fittings and accessories) complete all as specified and as directed.
S & F 200 mm bore PVC (SWR) Soil, waste and vent pipes single socketed in any length with rubber ring joints fixed to walls complete all as specified & directed.
S & F 110 mm bore PVC (SWR) Soil, waste and vent pipes single socketed in any length with rubber ring joints fixed to walls complete all as specified & directed.
S & F 110 mm bore PVC (SWR) bends with door of any radius complete all as specified & directed.
S & F 110 mm bore PVC (SWR) Vent cowl complete all as specified & directed
S & F 75 mm bore PVC (SWR) Soil, waste and vent pipes single socketed in any length with rubber ring joints fixed to walls complete all as specified & directed.
S & F 75 mm bore PVC (SWR) bends of any radius complete all as specified & directed.
S & F 75 mm bore PVC (SWR) branch piece single (Single `Y') equal or unequal with access door complete all as specified & directed.
S & F 75 mm bore PVC (SWR) Vent cowl complete all as specified & directed
S & F 75 mm bore PVC (SWR) Junction single (Single `T') equal or unequal with door of any radius complete all as specified and directed.
S & F 110 mm bore PVC (SWR) Junction single (Single `T') equal or unequal with door of any radius complete all as specified and directed.
M&L for 75mm thick PCC (1:4:8) type D-2 (using 40mm graded mechanically crushed stone aggregate) as sub base of flooring complete all as specified and directed.
M&L for chequered cement concrete tiles 30cm x 30 cm x 25 mm thick (with grey cement and pigments), set, jointed and pointed in neat cement slurry in floor with grey cement mixed with pigments to match with the colour of tiles, laid over and including 20 mm thick screed bed in CM 1:6, complete all as specified and directed.
Demolition of cement concrete in ground floors and paving not exc. 15cm thick (below or above ground level) unreinforced complete all as specified and directed.
Surface excavation n exc 30cm & averaging 15cm deep in soft/loose soil and getting out complete all as specified and as directed.
Excavation over areas not exc 1.50m in depth in soft/loose soil and getting out complete all as specified and as directed.
M&L for Sand filling under floors or in foundations including watering and consolidation as in sand cushioning for interlocking paver blocks complete all as specified and directed.
M&L hardcore of broken stone or boulders of gauge not exceeding 63 mm deposited, spread and levelled in layers not exceeding 15cm thick, watered and rammed to a true surface complete all as specified and directed.
M&L for 100mm thick PCC (1:4:8) type D-2 (using 40mm graded mechanically crushed stone aggregate) as sub base of flooring complete all as specified and directed.
Use and waste formwork to sides of concrete foundations, footings, bases of columns, raft and matt beams sides and soffits (if any) of foundation and plinth beams and similar work , vertical or to batter for rough finished flat surfaces complete all as specified and directed.
Use and waste formwork to soffits of suspended slabs such as roof slabs, floor slabs, landings and similar work; not exceeding 200 mm thick (Horizontal or sloping for rough finished flat surfaces) complete all as specified and directed.
M&L for Reinforced cement concrete (nominal mix) 1:2:4 type B-1 (20 mm graded crushed stone aggregate) as in slabs supported on walls, beams and coloumns in floor, roof landings, balconies, deck slabs and shelves and the like etc, complete all as specified and directed. (Note: Reinforcement and form work shall be measured and paid separately).
M&L for Reinforced cement concrete (nominal mix) 1:2:4 type B-1 (20 mm graded crushed stone aggregate) in Foundations, footings, foundation plinth beams; bases for columns, etc. and mass concrete complete all as specified and directed. (Note: Reinforcement and form work shall be measured and paid separately).
M&L for brick work with sub class 'B' bricks using old size bricks straight or curved on plan exc 6 mtr mean radius built in CM 1:6 complete all as specified.
M&L for preparation of new plastered wall surface and applying two coat of cement base paint over a coat of primer complete all as specified and directed.
M&L for Preparation of newly plastered wall surfaces and applying three coats of white washing complete all as specified and directed.
S&F pre painted galvalume aluminium zinc coating GI based corrugated steel sheet 0.50mm thick of any colour having tensile strength of 550mpa as in roof covering/clading to wall, fixed with self taping screws complete all as specified and directed.
S&F pre-painted galvalume aluminium zinc coating GI based plain steel sheet 0.50 mm thick of any colour having tensile strength of 550 Mpa as in roof covering fixed with self drilling and self tapping screws, neoprene and limpet washers complete all as specified and directed.
S&F rolled mild steel section including hollow section as in main and cross beams, hip and jack rafters; purlins where connected to common rafters and running rails and guides for sliding doors; fixed with angle cleats or other connecting plates FE-290 Gde E-165. Complete all as specified and directed.
S&F wash hand basin, vitreous china white of size 550x 400mm including brackets,32mm dia waste fitting brass chromium plated and PVC waste pipe 32mm bore complete all as specified and directed.
S&F Brass chromium plated towel rail,600cm long including fittings complete all as specified and as directed.
S&F 15 mm bore medium grade galvanized steel water tubing with all fittings fixed to wall/ceiling or laid in floor complete all as specified.
S&F 20 mm bore medium grade galvanized steel water tubing with all fittings fixed to wall/ceiling or laid in floor complete all as specified.
S&F 15mm bore bib taps, cast copper alloy with crutch or butterfly handle, fancy type, chromium plated, screwed for iron pipe or for brass ferrule complete all as specified and directed.
S& F 15 mm bore angle stop valve (male or female thread) cast copper alloy with crutch or butterfly handle screwed down screwed for iron pipe complete all as specified and directed.
S&F 15 mm bore Pillar tap cast copper alloy with capsten head chromium plated fancy type screwed down high pressure with or without letter hot or cold with long screwed shank and flynuts screwed for iron pipe complete all as specified and directed.
S& F 15 mm bore stop valve (male or female thread) cast copper alloy with crutch or butterfly handle screwed down screwed for iron pipe complete all as specified and directed.
M&L for Machine cut kota stone slab 18-20 mm thick( of size not less than 55cm x 55 cm) laid and and jointed with grey cement slurry mixed with pigment to match the shade of the slab including cutting, washing,rubbing and polishing over and including cement screed bed 20 mm thick in cement mortar (1:6) complete all as specified and as directed.
M&L for glazed coloured ceramic tiles of size 450x300x 7-8mm thickness on vertical surfaces set and jointed in neat cement slurry and pointed in white or colour cement to match with colour of tiles complete all as specified and as directed.
S&F PVC (SWR) floor trap plain with CP grating including jointing with solvent cement complete
S&F mild steel Framed work such as grills, gratings etc, with ends of bars shouldered or rebated or forged into spikes, framed guard bars, barred iron doors, railings, framework of water tanks and similar work conforming to Fe -290 Grade -E-165, complete all as specified and directed.
S&F Rotational moulded polyethylene water storage tanks of 1000 litre capacity double layer black in colour (cylindrical vertical with closed top) hoisted and fixed in position all as specified in SSR Part-I complete all as specified and directed
Taking down carefully copper/Aluminum point wiring light fan, socket or power complete (fittings such as switches ceiling roses pendants, regulators, sockets, sketch light fittings, tube light fittings etc. to be measured separately if found serviceable) and removing unserviceable materials from site of work and segregating serviceable materials for safe custody and making good to disturbed surfaces of walls, floors, etc. including disconnecting of ceiling fan/exhaust fan complete all as directed
Taking down old unserviceable Main Switch, DB's consisting of MCBs wooden/GI/MS sheet board etc for kept in store and for later use all as directed.
Taking down carefully unserviceable sub main wiring of any size/core/type including making good the disturbed surfaces all as directed.
M&L for concealed point wiring with two single core PVC insulated, unsheathed, multistranded copper conductor FRLS of size 1.5 sqmm and one single core PVC insulated unsheathed stranded copper conductor of size 1.50 sqmm green in colour as earth lead in and including PVC rigid conduit (medium grade) with all fittings & accessories for modular fittings for one light / fan point / call bell complete. NOTE : Cost of making good the disturbed surfaces (if any) matching with the existing surface is deemed to be included in the unit quoted rates.
All as per Item Sl No - 97 here in before but with two single core PVC insulated, unsheathed, multistranded copper conductor of size 1.5 sqmm and one single core PVC insulated unsheathed stranded copper conductor of size 1.5 sqmm green in colour as earth lead for 5/6 A switch-socket point on independent board complete.
All as per Item Sl No - 97 here in before but with two single core PVC insulated, unsheathed, multistranded copper conductor of size 2.50 sqmm and one single core PVC insulated unsheathed stranded copper conductor of size 2.5 sqmm green in colour as earth lead for 15/16 A switch-socket point on independent board complete.
All as per Item Sl No - 97 here in before but with two single core PVC insulated, unsheathed, multistranded copper conductor of size 1.5 sqmm and one single core PVC insulated unsheathed stranded copper conductor of size 1.5 sqmm green in colour as earth lead for 5/6 A socket point with switch on same board complete.
Supply & fixing Raceways PVC Cat 6 structured cabling system of size 150 mm x 38 mm - 3 compartment for screed floors including necessary junction boxes, couplers, fixing bracket, Riser,etc complete all as specified and as directed.
S&F floor boxes suitable for tile/marble for screed floor including the followings :- (i) Back box for screed floor, screed thickness 65 to 90 mm (ii) Lid & Trim for tile 8-15mm thickness material for head band & single cable outlet - stainless steel 304 (iii) Support plates for floor boxes.
S&F modular switch (as per existing colour of wall panelling) one way 6 Amps 230 Volts, 1 Module complete all as specified and as directed by Engineer in Charge.
S&F modular (as per existing colour of wall panelling) bell push switch one way 6 Amps 230 Volts, 1 Module complete all as specified and as directed by Engineer in Charge.
S&F modular (as per existing colour of wall panelling) switch one way with indicator 16 Amps 230 Volts, 1 Module complete all as specified and as directed by Engineer in Charge.
S&F modular (as per existing colour of wall panelling) socket 2 in 1, 2/3 pin , 6 Amp complete all as specified and as directed by Engineer in Charge.
S&F modular ( as per existing colour of wall panelling) socket 3 pin , 6-16 Amp combined shuttered complete all as specified and as directed by Engineer in Charge.
S&F modular (as per existing colour of wall panelling) white cover plate with frame 1 module inclusive of inner & outer plate complete all as specified and as directed by Engineer in Charge.
S&F modular (as per existing colour of wall panelling) white cover plate with frame 3 module inclusive of inner & outer plate complete all as specified and as directed by Engineer in Charge.
S&F modular (as per existing colour of wall panelling) white cover plate with frame 6 module inclusive of inner & outer plate complete all as specified and as directed by Engineer in Charge.
S&F modular (as per existing colour of wall panelling) white cover plate with frame 8 module inclusive of inner & outer plate complete all as specified and as directed by Engineer in Charge.
S&F modular (as per existing colour of wall panelling) white cover plate with frame 12 module inclusive of inner & outer plate complete all as specified and as directed by Engineer in Charge.
S&F modular metal flush box 1/2 module complete all as specified and as directed.
S&F modular metal flush box 3 module complete all as specified and as directed.
S&F modular metal flush box 6/8 module complete all as specified and as directed.
S&F modular metal flush box 12 module complete all as specified and as directed.
S&F ceiling rose of existing wooden colour , 65mmx 50mm size with three terminals complete all as pecified and as directed.
S & F Bell Ding-Dong AC 230 V Single Pole complete all as specified and as dircted.
S&F flexible LED warm strips with optimum brightness & uniformity of light for perfect cove lighting complete all as specified and as directed.
S&F ceiling mounted square pattern LED 2x2 panel luminaire light 3000K, 36 W, 230 volts including driver and necessary fixing arrangement complete all as directed by EIC.
S&F ceiling mounted recessed round down lighter LED 15W luminaire light 3000K, 230 volts including driver and necessary fixing arrangement complete all as directed by EIC.
S&F track mounted LED light with modern design, compact size with high power CO LED to provide focussed light track light is a method of lighting where fixures are attached anywhere on a continuous track rail which is electrically charged as compared the need of routing electrical wiring to individual light position complete all as speified and as directed.
S&F uneco surface spot light with white powder coated aluminium housing and pressure die-cast heat sink having high efficiency 20w, 3000k, 230 volts including necessary fixing arrangements complete all as specified and as directed.
Taking down ceiling fans/exhaust fan of any size,dismantling blades and removing fan and blades to MES store complete all as specified and directed.
S&F electronic step regulator (speed regulation in 5 steps) suitable for ceiling fan 1200 mm/1400 mm sweep, 120 Watt complete all as specified and directed.
S&F energy efficient BLDC (26 Watt) ceiling fan 230V, 1200 mm sweep without remote with all accessories and connecting up with the ceiling rose with required flexible wire of suitable size with ceiling fan complete all as specified and as directed.
Supply & Fixing DB with sheet metal enclouser 240 volts, 04 way, SPN double door for MCB, including cutting chases for DB of reqd size and making good distrubed surface area complete all as specified and as directed.
Supply & Fixing DB with sheet metal enclouser 240 volts, 12 way, SPN double door for MCB, including cutting chases for DB of reqd size and making good distrubed surface area complete all as specified and as directed.
S&F MCB TPN 63 Amp 415 volt breaking capacity 16KA complete all as specified and as directed.
Supply & Fixing MCB double pole (DP) 240 volts of capacity 32 Amp ,C curve, complete all as specifie and as directed.
S&F MCB, SP, 10KA, 415V, "C" curve, 06-32 A, ISI Marked complete all as directed.
Material and labour for concealed sub main wiring with two nos single core PVC insulated unsheathed multi strand copper conductor FRLS cable of size 10 sqmm and one no single core PVC insulated unsheathed multi strand copper conductor FRLS cable of size 10 sqmm as in continuous earth wire drawn into and including rigid non-metallic ISI marked PVC conduit medium grade with all fittings and fixings accessories complete all as specified and as directed.
Material and labour for concealed sub main wiring with two nos single core PVC insulated unsheathed multi strand copper conductor FRLS cable of size 6 sqmm and one no single core PVC insulated unsheathed multi strand copper conductor FRLS cable of size 6 sqmm as in continuous earth wire drawn into and including rigid non-metallic ISI marked PVC conduit medium grade with all fittings and fixings accessories complete all as specified and as directed.
Material and labour for concealed sub main wiring surface type with two nos single core PVC insulated unsheathed multi strand copper conductor FRLS cable of size 4 sqmm and one no single core PVC insulated unsheathed multi strand copper conductor FRLS cable of size 4 sqmm as in continuous earth wire drawn into and including rigid non-metallic ISI marked PVC conduit medium grade with all fittings and fixings accessories complete all as specified and as directed.
Material and labour for concealed sub main wiring surface type with two nos single core PVC insulated unsheathed multi strand copper conductor FRLS cable of size 2.5 sqmm and one no single core PVC insulated unsheathed multi strand copper conductor FRLS cable of size 2.5 sqmm as in continuous earth wire drawn into and including rigid non-metallic ISI marked PVC conduit medium grade with all fittings and fixings accessories complete all as specified and as directed.
SRI SURAJIT SENGUPTA
M/S S.B. CONSTRUCTION
MARWA CONSTRUCTION
LIBERAL ENGINEER CONSTRUCTION
M S ALOK SAHA
M/S SUBRATA JOARDAR
TAPASH SAHA
stage.html
html • 0.06 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .