Construction of C.C.Road At.Kelawali (Wangani) Adiwasiwadi in V.P. Bid, Tal.Khalapur, Dist.Raigad

Item No 1- Excavation for roadway in hard murum and boulder including dressing section to the required grade, camber and side slopes and conveying the excavated materials with all lifts upto a lead of 50m.and spreading for embankment or stacking as directed.

Item No 2- Providing earth work in embankment with approved materials obtained from other sources upto lead of 50m. including all lifts, laying in layers of 20cm. to 30cm. thickness breaking clods, dressing to the required lines, curves, grades & section, watering and compaction with vibratory roller with V-Sat attachment to achieve not less than 97 % of standard proctor density etc. complete ( Material obtained from Other sources)

Item No 3-Providing and laying cement concrete pipe of IS 458:2003 NP-3 class of 600mm diameter in proper line, level and slope etc. complete.

Item No 4 - Providing dry/ trap/ granite/ quartzite/ gneiss rubble stone soling 15 cm to 20 cm thick including hand packing and compacting etc. complete.

Item No 5 - Construction of dry lean cement concrete Sub- base over a prepared sub-grade with coarse and fine aggregate ( natural sand/ VSI grade finely washed crushed sand) conforming to IS: 383, the size of coarse aggregate not exceeding 25 mm, , cement content not to be less than 150 kg/ cum, optimum moisture content to be determined during trial length construction, concrete strength not to be less than 10 Mpa at 7 days, mixed in a batching plant/ Weigh batch mixer, transported to site with all leads and lifts, laid with a paver with electronic sensor /by suitable means as approved by Engineer-in-charge , compacting with vibratory roller, finishing, curing and including preparation of sub-grade surface if required etc. complete. with fully automatic micro processor based PLC with SCADA enabled reversible Drum Type mixer/ concrete Batch mix plant (Pan mixer) etc. complete.

Item No 6 - Providing and laying in situ cement concrete M -30 with tremix treatment for 200 mm thickness for Concrete Road is including laying plastic sheet for 125 micron thickness with groove cutting of 4 mm wide and 20 mm deep with necessary refilling with bitumen ( excluding reinforcement) with coarse and fine aggregate ( natural sand/ VSI grade finely washed crushed sand) etc. complete with fully automatic micro processor based PLC with SCADA enabled reversible Drum Type mixer/ concrete Batch mix plant (Pan mixer) etc. complete.

Item No 7 - Providing and fixing 45 cm x 60 cm Marble plate including engraving 10 cm height letter ,figures including painting the letters/figures with aoved colourand shade etc. complete.

Item No.8:-Testing of materials in lab Rates for A) Sand

Item No.8:- Testing of materials in lab Rates for B) Cement

Item No.8:- Testing of materials in lab Rates for C) C.C.Cubes

Item No.8:- Testing of materials in lab Rates for D) Metal

Item No.8:- Testing of materials in lab Rates for E)Rubble

Item No.8:- Testing of materials in lab Rates for F) Concrete Mix Design

Item No.9:-Add for Royalty Charges for Other Minerals

Item No.10:Add 1% for Work Insurance

Item No.11:Add 18 % for G.S.T.Charges

Item No.12:Add 1 % for S.Q.m Charges

Please Enable Macros to View BoQ information