REPAIR AND MAINT OF WATER SUPPLY INSTALLATION AND WATER SUPPLY LINES AT MAP PHASE II IN 5 AREA UNDER GE AF ADM AREA AGRA

Amount

Excavation in trenches not exceeding 1.5 mtr in depth and not exceeding 1.5 mtr wide in soft/ loose soil for laying and taking out of GI/ CI/ DI water pipe line complete all as specified and directed.

Returning, filling in (with excavated soil) including spreading, levelling, watering and well ramming in layers not exceeding 25 CM thick complete all as specified and directed.

Removing excavated material (soil) to a distance not exceeding 50 meters and depositing where directed at a level not exc 1.5 mtr above the starting point complete all as specified and directed.

Taking up cast iron, 150 MM bore water mains including all fittings with including burning out joints and recovering lead complete all as specified and directed.

Taking up cast iron, 100 MM bore water mains including all fittings with including burning out joints and recovering lead complete all as specified and directed.

Taking up cast iron, 75/ 80 MM bore water mains including all fittings with including burning out joints and recovering lead complete all as specified and directed.

Taking up and down old/ unserviceable GI water tubing with fittings of size 75/ 80 mm bore complete all as specified and directed.

Taking up and down old/ unserviceable GI water tubing with fittings of size 50 mm bore complete all as specified and directed.

Taking up and down old/ unserviceable GI water tubing with fittings of size 40 mm bore complete all as specified and directed.

Taking up and down old/ unserviceable GI water tubing with fittings of size 25 mm bore complete all as specified and directed.

Taking up and down old/ unserviceable GI water tubing with fittings of size 20 mm bore complete all as specified and directed.

Re- laying only cast iron pipe with spigot ends of size 150 mm bore complete all as specified and directed.

Re- laying only cast iron pipe with spigot ends of size 100 mm bore complete all as specified and directed.

Re- laying only cast iron pipe with spigot ends of size 75 mm bore complete all as specified and directed.

Laying and re-fixing only old but serviceable GI water tubing 80 mm bore after cleaning and laying in exiting trenches with required new GI fittings complete all as specified and directed.

Laying and re-fixing only old but serviceable GI water tubing 50 mm bore after cleaning and laying in exiting trenches with required new GI fittings complete all as specified and directed.

Laying and re-fixing only old but serviceable GI water tubing 40 mm bore after cleaning and laying in exiting trenches with required new GI fittings complete all as specified and directed.

Laying and re-fixing only old but serviceable GI water tubing 25 mm bore after cleaning and laying in exiting trenches with required new GI fittings complete all as specified and directed.

Laying and re-fixing only old but serviceable GI water tubing 20 mm bore after cleaning and laying in exiting trenches with required new GI fittings complete all as specified and directed.

Supply, laying, connecting and testing CI pipe 150 mm bore centrifugally cast, class-B both ends flanged type confirming to IS -1556- 2001 complete all as specified and directed.

Supply, laying, connecting and testing CI pipe 100 mm bore centrifugally cast, class-B both ends flanged type confirming to IS -1556- 2001 complete all as specified and directed.

Supply, laying, connecting and testing CI pipe 75/ 80 mm bore centrifugally cast, class-B both ends flanged type confirming to IS -1556- 2001 complete all as specified and directed.

Supply, fixing and laying GI water tubing 80 mm bore medium grade ISI marked with all required fittings such as bends elbows, tees, short pieces, connector, check nuts & threading complete all as specified and directed.

Supply, fixing and laying GI water tubing 50 mm bore medium grade ISI marked with all required fittings such as bends elbows, tees, short pieces, connector, check nuts & threading complete all as specified and directed.

Supply, fixing and laying GI water tubing 40 mm bore medium grade ISI marked with all required fittings such as bends elbows, tees, short pieces, connector, check nuts & threading complete all as specified and directed.

Supply, fixing and laying GI water tubing 25 mm bore medium grade ISI marked with all required fittings such as bends elbows, tees, short pieces, connector, check nuts & threading complete all as specified and directed.

Supply, fixing and laying GI water tubing 20 mm bore medium grade ISI marked with all required fittings such as bends elbows, tees, short pieces, connector, check nuts & threading complete all as specified and directed.

M&L in repair for run lead joints complete with spun yarn of size 150 mm bore including required excavation and refilling and earth work complete all as specified and directed.

M&L in repair for run lead joints complete with spun yarn of size 100 mm bore including required excavation and refilling and earth work complete all as specified and directed.

M&L in repair for run lead joints complete with spun yarn of size 75/80 mm bore including required excavation and refilling and earth work complete all as specified and directed.

Supply & fixing in repair CI fittings up to 150 mm bore such as (bend/ coller/ reducer/ angle/ tapers) any type ( straight, bends increasing, decreasing or double socket etc ) tail pieces single branch Y junction, double branch cross ( all sockets or socket ) complete all as specified and directed.

M&L in replacement of existing U/S CI sluice valve flanged of size 200 mm bore class PN-1.0 ISI marked with stainless steel spindle and iron wheel head complete with rubber gaskets, nuts, bolts washers and packing materials etc complete all as specified and directed.

M&L in replacement of existing U/S CI sluice valve flanged of size 150 mm bore class PN-1.0 ISI marked with stainless steel spindle and iron wheel head complete with rubber gaskets, nuts, bolts washers and packing materials etc complete all as specified and directed.

M&L in replacement of existing U/S CI sluice valve flanged of size 100 mm bore class PN-1.0 ISI marked with stainless steel spindle and iron wheel head complete with rubber gaskets, nuts, bolts washers and packing materials etc complete all as specified and directed.

M&L in replacement of existing U/S CI sluice valve flanged of size 75/ 80 mm bore class PN-1.0 ISI marked with stainless steel spindle and iron wheel head complete with rubber gaskets, nuts, bolts washers and packing materials etc complete all as specified and directed.

M&L in replacement of existing U/S CI non return valve of size 150 mm bore flanged ISI marked including bolts, nuts, washers and rubber gasket etc complete all as specified and directed.

M&L in replacement of existing U/S CI non return valve of size 200 mm bore flanged ISI marked including bolts, nuts, washers and rubber gasket etc complete all as specified and directed.

M&L in replacement of existing U/S gun metal gate valve ISI marked with iron wheel head screwed both ends for pipe of size 50 mm complete all as specified and directed.

M&L in replacement of existing U/S gun metal gate valve ISI marked with iron wheel head screwed both ends for pipe of size 40 mm omplete all as specified and directed.

M&L in replacement of existing U/S gun metal gate valve ISI marked with iron wheel head screwed both ends for pipe of size 25 mm complete all as specified and directed.

M&L in replacement of existing U/S gun metal gate valve ISI marked with iron wheel head screwed both ends for pipe of size 20 mm complete all as specified and directed.

Repair to GI water pipe lines of size 15 to 25 mm bore and repair to leaking joints of pipe line complete including replacement of GI fitting i.e union, nipple & sockets, if required including excvation and taking up & down required cutting & threading refixing.

Repair to GI water pipe lines of size 40 to 50 mm bore and repair to leaking joints of pipe line complete including replacement of GI fitting i.e union, nipple & sockets, if required including excvation and taking up & down required cutting & threading refixing.

Dismantling of old U/S valve pit of any size/ dimension ( internal dimensions of the chamber) including and removing the unserviceable material at a distance not exceeding 50 Mtr including provn of new brick massonary valve pit of existing size built with cement mortar (1: 6), full brick thick walls as per following specifications :- (i) 10 mm thick cement plaster internally in CM 1:6 & externally (up to 150 mm below GL) (ii) Flooring 40 mm thick in PCC 1:2:4 type B-1 over 75mm thick hard core of guage not exc 63mm thick. (iii) Angle iron frame 40 mm X 40 mm X 6 mm thick for cover and 3mm thick mild steel sheet cover with locking arrangement, handle and necessary hinges etc. (iv) PCC 1:3:6 type C-2 100 mm thick in foundation. (v) 75 mm thick coping in PCC 1:2:4 type B-1. (vi) Two coats of synthetic enamel paint on steel surfaces of cover internally and externally over a coat of red oxide primer.

M&L for cleaning and removal of all scale, dirt and heavy settled sand particles from the RCC over head reservoir 50,000 gallons capacity at 40/ 60 feet staging from mouths of circulating pipe, brushing, sweeping and brooming inner and outer tank and washing the complete tank with bleaching powder and painting with two coats of synthetic enamel paint to rising main, delivery pipe, wash out and over flow pipes of internal dia 150 mm bore and also writing date of cleaning and marking rising of delivery mains and header including all requisite safety precautions for worker to avoid any incident all as specified and directed.

M&L for cleaning and removal of all scale, dirt and heavy settled sand particles from the RCC semi under ground sump of 50,000 lakh lts capacity brushing, sweeping and brooming inner and outer tank and washing the complete tank with bleaching powder and M&L for white washing the entire over head tank with existing colour and painting with two coats of synthetic enamel paint to rising main, delivery pipe also writing date of cleaning and marking rising of delivery mains and header including all requisite safety precautions for worker to avoid any incident all as specified and directed.

Repair to leakage of joint of CI pipe 200 mm bore, including lead as per site requirement including earth work all as specified and directed.

Repair to leakage joint of CI pipe 150 mm bore, including lead as per site requirement including earth work all as specified and directed.

Repair to leakage joint of CI pipe 100 mm bore, including lead as per site requirement including earth work all as specified and directed.

Repair to leakage joint of CI pipe 75/ 80 mm bore, including lead as per site requirement including earth work all as specified and directed.

M&L for replacement of existing U/S Air Release Valve ( ARV) with 25 mm bore air release valve one way with 300mm height from FFL (from surface) for existing 150mm & 200mm dia CI pipe line including requisite fastening, clamp and earth work as required also to make good all as directed.

Surface dressing including removal of grass, rubbish, bushes and unwanted plants etc around the water supply installations complete all as specified and directed.

M&L for replacement of existing U/S sign board with size of 4 feet x 3 feet of PVC fibre sheet board of 6 mm size heavy duty including writing alphabatic letters computerised with refelctive sheets to be made as all directed of size 150 mm font including providing LED tubelight 20 W and fixed with stainless steel pipe heavy duty of size 40 to 50 mm dia and to be fixed outside the installations duly burried in ground along with required PCC and top of the sign board should be 2.0 mtr and all as directed and specified.

Taking out submersible pump of (any capacity and make) from the borewell complete with column pipe and other connected parts/accessories all per site requirement complete all as specified and directed.

Lowering submersible pump after repair (any capacity and make) in the borewell complete with column pipe and other connected parts and replacement of nuts, bolts and gasket of suitable size all per site requirement complete all as specified and directed.

Strip opening of 3 phase 10 HP, AC submersible motor, taking out burnt winding coil complete and re-winding with PVC insulated super quality water proof winding wire including PVC seal (water proof compound) and thrust bearing as per requirement of existing size and make, re-assembling the motor and testing complete.

S&F mild steel column pipe for submersible pump set, 80 mm bore, 5 mm thick and 3 mtr. Long duly screwed/ welded flanged on both sides with bolts & nuts to mild steel flange including rubber joints all as specified and directed.

Supply only calcium based granual disinfectant for water treatment more stable than chlorine gas and stronger than bleaching powder and sodium hypochloride (Packing in 45 Kg plastic drum) . Make:- AQUAFIT (Manufactured by Sreerayal seema hypo high strength (AP) or equivalent approved of E-in-C branch. Note:- Contractor shall produced purchase vouchers and Test certificate from authorised dealer/ manufaturere at the time of supply of material. No material will accepted without TC and PVs.

Supply and fixing in repair submersible cable 10 sqmm copper 3 core as per IS : 694 complete all as specified and directed.

Supply and fix in repair fully automatic starter suitable for 3 phase 400/440 volts 50 cycles/seconds for 5/7.5 HP capacity Motor complete all as specified and directed.

M&L for replacement of existing U/S single phase preventor complete all as specified and directed. Make : Minilec or equivalent.

M&L for scraping of old dull paints from the surface by scratching by wire brushes of steel surface over width or girth such as CI pipe, valve, motor, pump dozer , header etc and applying two coats of synthetic enamel paint by painting brush as per colour code and writing MES/ SM No/ location of machinery / pipe line comprising with the following items :- (i) Pipe lines of size 80 mm to 200 mm bore. (ii) LT Panel Board (iii) Centrifugal pump / motor set with accessories etc

Material and labour for replacement of existing U/S street light fittings with LED flood light fitting 90 Watts, IP 66, having pressure die cast alumn alloy housing with heat resistant toughned glass with individual LED lenses, having surge protection device 10 Kv and Driver shall be IP-67 for water protection, including making connections with PVC insulated and sheathed three core multi stranded alumn conductor cable of size 2.5 Sqmm complete all as specified and directed.

M&L in replacement of existing U/S MCCB 160 Amps current carrying capacity 36 KA , AC 415 Volts four pole with magnetic/ thermal fixed setting complete all as specified and directed. Make : Legrand / Seimens/ GE Power

M&L in replacement of existing U/S MCCB 125 Amps current carrying capacity 36 KA , AC 415 Volts four pole with magnetic/ thermal fixed setting complete all as specified and directed. Make : Legrand /Seimens /GE Power

Supply and fixing in replacement of existing old un-serviceable fixed type MCCB with MCCB 63 amps, 4 pole, 415 volts, 16 KA complete all as specified and directed. Make:- ABB / Legrand / Hager.

M&L for replacement of existing U/S obstruction light with LED obstruction light 5 Watt, 230 volts AC having single dom including all connected accessories and fixing/ installation on overhead reservoir complete all as specified and directed.

Taking out / dismantling/ opening of monoblock/ centrifugal pump including motor capacity 10 HP after disconnecting all electrical connections and taking out the same from foundation for complete servicing with materials including cleaning lathe work of shaft re-assambling & re-installation of the same on existing foundation including making all electrical connection and testing on complection complete with replacement of burnt/ damaged parts complete all as specified and directed. Note : Burnt/ damaged parts shall be measured and paid saperetly as "supply only".

M&L for rewinding of centrifugal pump set 10 HP with super enamelled copper winding wire of existing gauge & No of turns, insulating with varnishing & heating including cutting and existing burent winding complete and sealing the winding by using sealing compound complete all as specified and directed.

M&L for replacament of existing old unservicable earthing complete with galvanised steel earth plate electrode of size 600 mm x 600 mm x 6 mm thick burried directly in the ground (earth pit not less than 2.25 mtr deep below ground level) with top edge of the plate not less than 1.5mtr below ground level connected to galvanised iron wire 4 mm dia as earth lead by means of bolts, nuts and washers of GI up to test point , GI tubing 15 mm bore medium grade protection pipe , GI watering pipe 20 mm bore light grade with funnel and wire mesh , charcoal ,salt and precast PCC 1:2:4 (Nominal mix ) reinforced with XPM having weight not less than 4 kg /sqm including suitable handle of 6mm dia MS bar and angle iron 40x40x3mm frame for cover including earth work in soft/ loose soil , removal of surplus soil to a distance n.exc 50m and connecting , testing on completion all as shown on electric plate No 03 of SSR -2009 Part I complete all as specified and directed. Note: Excavation and earth work is deemed to be included in the rates quoted.

M&L in replacement of old u/s service cable size 16 sqmm, twin core 1100 volts grade heavy duty cable PVC insulated aluminium conductor, served with inner sheathing of PVC tape and overall PVC sheathed in service complete all as specified and directed.

M&L for replacement of existing U/S submersible pump set 5 HP with 40-50 metre head range complete all as specified and directed.

Supply only the following parts/ items of monoblock/ centrifugal pump set and bowl assembly :- (i) Ball bearing suitable for 10 HP monoblock / centrifugal pump set complete all as directed. Make- SKF/ NBC/ Tata.

(ii) SS bush as per existing suitable for 10 HP monoblock / centrifugal pump set complete all as specified and directed.

(iii) MS sleeves as per existing suitable for 10 HP monoblock / centrifugal pump set complete all as specified and directed.

(iv) MS Impeller suitable for 10 HP monoblock / centrifugal pump set complete all as specified and directed.

Supply,installation,testing & commissioning of granular chlorination dosing system with chemical dosing pump, high pressure, single head, gear motored with 4 lph to 7 lph dosing and adjustable high pressure up to 7 kgf/cm2 with accessories including lead, tubing, connection nuts, injection clay valve, clay weight and ferrules and 100 litres FRP tank with lid and level gauge along with agitator & shaft & blade in plastic mounted on tank.The agitator motor must possess following specifications :- Voltage input 230 V, Single phase, 50 Hz, 900 RPM of suitable capacity The accessories in the dosing system must consist of the following :- (a) Preparation tank (300 ltr) (i) water inlet line (ii)Outlet with strainer (iii)Drain (iv)Overflow (v) Conical bottom for sludge disposal (vi)Port hole with cover. (vii)Level gauge (viii)Agitator:120 W,900 RPM,single phase flange mounted motor with plastic shaft and impeller. (b) Service Tank (100 LTR) (i) Water inlet (ii) Dosing pump mounting provisions on lid/wall. (iii)Drain (iv)Overflow (v)Level gauge (vi)Inspection Port Make-DECLIBAC/ AQUAFIT/ AGUAPURO

Repair and maintenance of water booster pump upto 2 HP capacity including changing of worn out parts complete all as specified and directed.

M&L for fixing of CI water filter suitable for 200 mm bore CI/ DI pipe required for installation of Woltman water meters including all connected items complete all as specified and directed.

M&L for fixing of CI water filter suitable for 100 mm bore CI/ DI pipe required for installation of Woltman water meters including all connected items complete all as specified and directed.

M/s S.M. Construction

M/s Sumer Associates

MUKTA AND COMPANY

Balaji Associates

M/s Pooran Singh and Company