SPECIAL REPAIRS TO BLDG NO P-13 AT SELECTION CENTRE SOUTH AND PROVN OF CEILING, GUTTER LINES, CHANGE OF BATH ROOM TILES OF BLDG NO T-34 OF OFFRS MESS STORE ROOM AT SSB UNDER GE(SOUTH) BANGALORE

Amount

Dismantling floor hearth or wall tiling including cement mortar bedding (but not backing) removing serviceable tiles to store and rubbish off the premises complete all as specified and as directed.

M & L 40mm thick cement concrete type B-1, 1:2:4 (using 20mm graded crushed stone aggregate) as in sub base of floors complete all as specified and as directed.

S &F coloured non skid tiles 7 to 8mm thick (Square / rectangular ) area of each tile exceeding 0.18 sqm but not exc 0.36 Sqm in floor etc set and joined in neat cement slurry and pointed in white cement or coloured cement to match over and including 15mm thick screed bed in cement mortar 1:6 complete all as specified and as directed.

S &F coloured non skid tiles 7 to 8mm thick (Square / rectangular ) area of each tile exceeding 0.18 sqm but not exc 0.36 Sqm in skirting / dado etc set and joined in neat cement slurry and pointed in white cement or coloured cement to match over and including 15mm thick screed bed in cement mortar 1:6 complete all as specified and as directed.

M & L machine cut kota stone slab flooring 20-25mm thick over and including 20mm thick cement screed base of cement mortar 1:6 laid and joined with grey cement slurry mixed with pigment to match the shade to the slab including rubbing and polishing complete all as specified and as directed.

M & L machine cut kota stone slab flooring 20-25mm thick in riser of step, skirting, dado and pillar laid cement screed and joined with grey cement slurry mixed with pigment to match the shade to the slab including rubbing and polishing complete over and including 10mm thick on fair faces of brick work or concrete surfaces a backing coat in cement mortar 1:6 complete all as specified and as directed.

S &F coloured non skid ceramic tiles 7 to 8mm thick (square / rectangular) area of each tile exceeding 0.06Sqm but not exceeding 0.11 Sqm in floors etc set and joined in neat cement slurry and pointed in white cement or coloured cement to match over 15mm thick screed bed in cement mortar 1:6 complete all as specified and as directed.

S & F coloured Glazed ceramic tile in vertical surface area exc 0.06qm but n exc 0.12sqm set and joined in neat cement slurry and pointed in white or colour cement to match 10mm thick on fair face of brick work or concrete surfaces as backing coat in cement mortar 1:6 complete all as specified and as directed.

Taking down easing and adjustment and also refixing builders hardware in other opening as required incl renewal & refixing building hardware as required shutters of any description exc 1 Sqm and n exc 2 sqm each complete all as specified and as directed.

Dismantling cement (Corrugted, semi corrugated etc) sheets in roof covering complete all as specified and as directed.

Dismantling mangalore pattern roofing tiles with ceiling tiles or slate roofing & similar work complete all as specified and as directed.

Dismantling un framed timber scantling 40 Sqcm and over in section in any position complete all as specified and as directed.

Dismantling un framed timber fillets, rails, posts, rafters, purlin etc under 40Sqcm in section in any position complete all as specified and as directed.

S & F pre painted Galvalume aluminium zinc coating GI based corrugated steel sheet 0.50mm thick of an colour having tensile strength of 550Mpa as in roof covering / cladding to wall, fixed with self tapping screws all as specified and as directed.

S & F prepainted Galvalume aluminium zinc coating GI based plain steel sheet 0.50mm thick of an colour having tensile strength of 550 Mpa as in roof covering / cladding to wall, fixed with self tapping screws complete all as specified and as directed.

S & F rolled sections as in main and cross bems, hop and jack rafters, purlin where connected to common rafter and running rails and guiders for sliding doors fixed with angle cleats or other connecting plates conforming to Fe 410W (Gde E 250) quality A complete all as specified and as directed.

M & L preparation of new or previously untreated steel and iron surfaces of any description over 10cm in width or girth not otherwise described and applying two coats of synthetic enamel paint over a coat of red oxide complete all as specified and as directed.

M & L preparing surfaces of wood and wood based tiles or slate battens, any size and spacing, prepared and treated all over (measured over all on one side only, spaces not deducted) with new or old of any description and girth not otherwise described and treated with one coat of creosote oil complete all as specified and as directed.

Dismantling boarding any description fixed any position with nails complete all as specified and as directed.

S & F Techno Y Grid ceiling suspension system using M S hot dip section of main runner size 32mm x 24mm x 360mm , cross Tee size 27mm x 24mm x 1200mm & 27mm x 24mm x 600mm, wall angle of size 22mm x 20mm x 3050mm sheet thickness 0.30mm, including panels of Techno Acoustic Mineral FIbre Square mineral tesured tiles suspension system panels shall be of size 600mm x 600mm x 12mm having noise reduction co - efficient 0.4-0.6 light reflection over 85 relative humidity 95% Grid ystem for fixing ceiling tiles shall comprise of Techno T grid suspension system, 24mm web of main Tee runner suspended at an interval of 1200mm centre to centre, 1200mm cross tee attached between to main runners at every 600mm and further 600mm cross tee interconnected between two 1200mm cross tee and conforming a grid system of 600mmx 600mm. the main tees shall be suspended by means of 2/2.5mm wire of 4mm GI rod from slab /roof. the suspension shall be provided at 1200mm centre to centre and not more than 450mm from the wall. However, the suspension shall not be more than 150mm distance from the spliced joints of the main tee, complete all as specified and as directed. Make : New Age / Daiken / ARMstrong.

Taking down chowkat or frames with shutter (without taking off shutters from the frame) exc 1.5sqm but n exc 4 sqm complete all as specified and as directed.

S & F second class hard wood plain, solid, straight chowkats and frames, wrought, framed rebated on the solid rounded or chamfered put together with glue pinned at joints complete all as specified and as directed.

S & F 35mm thick flush shutter fabricated at site, solid core construction with block board core and ply wood face panels commercial type on one face and another face covered with decorative face veneer with lipping / frame to match complete all as specified and as directed.

S & F 30mm thick 2nd class hard wood Glazed and skelton shutters, open rebated and prepared to receive glass, gauze etc provided with stiles and rails as specified, edges of framing plain, chamfered or rounded, fitted with cut amd mitred beads for securing glass etc size of member of shutters as specified in SSR Part I, section 8, clause 8.24(a) complete all as specified and as directed.

S & F steel windows with side hung shutters including projecting type hinges with steel handle and steel peg stay complete with glazing bars dovetailed or welded complete all as specified and as directed.

S & F stainless steel wire cloth,0.36mm nominal dia of wire and average width of aperature 1.40mm and fixed with stainless steel wire staples complete all as specified and as directed.

S & F 3.0mm thick sheet glass ordinary quality and glazing with wooden beads in square n exc 0.5sqm in each pane all as specified and as directed.

S & F 100mm long butt hinges, medium weight cold rolled mild steel and fixed all as specified and as directed.

S & F 200mm long aluminium anodised barrel tower bolt and extrude section and fixed complete all as specified and as directed.

S & F 300mm long aluminium alooy, anodised sliding door bolt with hasp and staple (bolt type) and fixing clips or sheet, cast or extruded section and fixing bolts and sliding bolts of extruded sections of cast aluminium alloy fixed complete all as specified and as directed.

S & F 125mm long extruded aluminium alloy handle, fabricated type anodised all as speciifed and as directed.

M & L for 300mm rat tail rod pattern spring incl roller and roller plate complete all as specified and as directed.

M & L for preparation of new or previously untreated wood and wood based surfaces of any description, not other wise described over 10cm width or girth and applying two coats of synthetic enamel paint over a coat of pink primer complete all as specified and as directed.

Demolition of brick work or stone boulder masonry, built in cement mortar including all quoins, arches, pillars etc but excluding ashlar facing, dressed stone work and precast concrete articles complete all as specified and as directed.

M & L precast cement concrete 1:3:6 type C1 (using 20mm graded stone aggregate) as in block masonry with solid blocks exc 10cm in width and setting in cement mortar 1:4 complete all as specified and as directed.

M & L rendering 15mm thick on fair faces of brick work or concrete surfaces in cement mortar 1:4 including finished even and smooth (without using extra cement) complete all as specified and as directed.

Taking down cement plaster on brick or stone walls or concrete ceiling etc including raking out joints, hacking for key scrubbing down with water etc complete all as specified and as directed.

M & L for rendering 10mm thick on fair faces of brick work or concrete surfaces in cement mortar 1:6 including finished even and smooth (without using extra cement) all as specified and as directed.

M & L for rendering 5mm thick in cement mortar 1:4 on other than fair face of brick or concrete surface mixed with WPC @ 3% by weight of cement over 10mm thick in cement plaster in CM 1:4 finished even and smooth without using extra cement all as specified and as directed.

Supply only integral water proofing compound all as specified and as directed.

M & L preparing newly surfaces of walls and applying two coat of oil emulsion distemper including 2mm thick wall putty and priming plastered and other surfaces with chalk whiting on plastered surfaces complete all as specified and as directed.

M & L preparing newly plastered surfaces of walls and applying two coats of cement based paint and other surfaces over a coat of primer alkali resistant primer all as specified and as directed.

S & F in repairs harrison rails, anodised aluminium alloy with fixing brackets, stops, rollers etc complete all as specified and as directed.

Taking up or down 15mm bore steel tubing and connection including removal complete all as specified and as directed.

Taking up or down 20mm bore steel tubing and connection including removal complete all as specified and as directed.

S & F 15mm bore tubes, medium grade, galvanised with all fittings and fixed complete to walls and ceiling or laid in floors complete all as specified and as directed.

S & F 20mm bore tubes, medium grade, galvanised with all fittings and fixed complete to walls and ceiling or laid in floors complete all as specified and as directed.

S & F in repair vitreous china wash down water closet pan & trap (Pedestal pattern) with plastic water closet seat black closet pattern with flat bottom and cover and mild steel chromium plated or aluminium hinging device with flush pipe pedestal pan including all joints and connection to drain pipe complete all as specified and as directed.

S & F in repair PVC low level flushing cistern 10ltr capacity valveless, syphonic action type with inlet, ball valve float and handle including bracket and flush pipe 32mm bore complete all as specified and as directed.

S & F Health faucet (ABS body) mild steel Chromium plated suitable for 15mm dia pipe with 1.25m long flexible tube and ABS wall hook including making connection and fixed in poistion complete all as specified and as directed

S & F in repair vitreous china white wash hand basin flat back of size 550 x 400mm including brackets chain & plug and waste pipe, waste coupling etc complete all as speciifed and as directed.

S & F in repair PVC connection 15mm dia 45cm long with brass nut & washers etc complete all as spcified and as directed.

S & F in repair 32mm bore waste coupling of PTMT (half or full threaded) min weight 45Gms complete all as specified and as directed.

S & F in repair 15mm bore stop valve fancy type chromium plated cast copper alooy screwed down, high pressure with crutch or butterfly handle, screwed both ends for iron pipe or for union and fixed all as specified and as directed.

S & F in repair 15mm bore bib tap , cast copper alloy chromium plated with crutch or butterfly handle, screwed down screwed for iron pipe or for brass ferrule and fixed complete all as specified and as directed.

S & F in repair 15mm bore Pillar tap cast copper alloy, fancy type with capstan heads, chromium plated screwed down high pressure with or without lettered ' Hot' or 'cold' with long screwed for iron pipe and fixed all as specified and as directed.

S & F in repair brass chromium plated tubular towel rail 20mm dia, D type 60cm long between flanges complete all as specified and as directed.

M & L for Granite (of any type) tiles 20mm thick machine cut, bedded and joined with grey cement slurry and pointed with white cement with admixture of pigment to match the shade of granite stone including grinding and polishing complete all as specified and as directed.

Dismantling PVC / CI / AC drain pipe n exc 110mm dia complete all as specified and as directed.

S &F 75mm bore PVC (SWR) pipes single socketed, in any length with rubber ring joints, laid in trenches or in floors complete all as specified and as directed.

S & F 110mm bore PVC (SWR) pipes single socketed, in any length with rubber ring joints, laid in trenches or in floors complete all as specified and as directed.

M & L 75mm dia PVC (SWR) floor trap, plain with grating including jointing with solvent cement complete all as specified and as directed.

Dismantling to water tanks of capacity exc 500 litres and not exc 1000 litres complete all as specified and as directed.

S & F 1000 litre rotational moulded poly - ethylene water tanks (Cylindrical vertical closed top) hoisted and fixed in position all as specified and as directed.

S & F 20mm bore brass ball valve, high pressure, with polythene float and fly nut complete , screwed for iron pipe of brass ferrule and fixed complete all as specified and as directed.

Demolition of cement concrete in ground floors and pavings not exceeding 15cm thickness (below or above ground floor) complete all as speciifed and as directed.

M & L hard core of broken stone or boulders of gauge n exc 63mm deposited spread and levelled in layer n exc 15cm thick watered rammed to a true surface complete all as specified and as directed.

M & L for 75mm thick, PCC 1:3:6 type C1 (using 20mm graded stone aggregate) finished even and smooth without using extra cement as in plinth protection including joints filling complete all as specified and as directed.

M & L 75mm thick cement concrete type D-2 1:4:8 using 40mm graded crushed stone aggregate as in sub base of floors complete all as specified and directed.

S & F Chequered cement concrete tiles 20cm x 20cm x 25mm thick with grey cement and pigment, set joined and pointed in neat cement slurry in floors over 20mm thick screed bed in cement mortar 1:6 complete all as specified and as directed.

M & L providing and injecting chemical emulsion for post constructional ATT at points of contact of wood work by chemical emulsion ( in oil or kerosene based solution) @ 0.5 litre / hole by drilling 6mm dia holes at a downward angle of 45 degree at 150mm centre to centre and sealing the same complete all as specified and as directed.

M & L for providing and injecting chemical emulsion for post constructional ATT treatment of soil under existing floors using emulsion @ one litre per hole, 300mm apart incl drilling and plugging 12mm dia holes with cement mortar 1:2 to match the existing floors complete all as specified and as directed.

M & L providing and injecting chemical emulsion for post constructional ATT along the external wall below concrete or masonry apron using chemical emulsion @ 2.25 litres per linear meter including drilling and plugging holes etc in apron complete all as specified and as directed.

M & L for cement concrete 1:3:6 type C1 (using 20mm graded crushed stone aggregate) in lintel upto 1.5m clear span, cills, steps, seismic and other similar bands, plinth course, string course, lacing course, parapets and railing upto 60cm in height, coping, kneelers, apex stones bed plates, kerbs including weathering slightly rounded or chamfered angles and throating complete all as specified and as directed.

Dismantling Plain or corrugated steel sheeting,any gauge, thickness, includingNainital or similar pattern roof coverings (Double sheeting) complete all as specified and as directed.

M & L for preparation of old plastered surfaces of walls and applying two coats of white wash complete all as specified and as directed.

S & F 30mm thick flush shutter fabricated at site, solid core construction with block board core and ply wood face panels commercial type on one face and another face covered with decorative face veneer with lipping / frame to match complete all as specified and as directed.

S & F 30mm thick 2nd class hard wood Glazed and skelton shutters, open rebated and prepared to receive glass, gauze etc provided with stiles and rails as specified, edges of framing plain, chamfered or rounded, fitted with cut amd mitred beads for securing glass etc size of member of shutters as specified in SSR Part I, section 8, clause 8.24(a) complete all as specified and as directed.

S & F galvanised mild steel wire cloth 0.56mm nominal dia of wire and average width of aperture 1.40mm and fixed with tinned tacks, or galvanised wire staples complete all as specified and as directed.

S &F stainless steel 100mm butt hinges for doors complete all as specified and as directed.

S & F 250mm long aluminium alooy, anodised sliding door bolt with hasp and staple (bolt type) and fixing clips or sheet, cast or extruded section and fixing bolts and sliding bolts of extruded sections of cast aluminium alloy fixed complete all as specified and as directed.

S & F 150mm long extruded aluminium alloy handle, fabricated type with plate anodised all as speciifed and as directed.

S & F for floor door stopper (double) of aluminium alloy body and tongue anodised with hard drawn steel spring fixed to door over all length of cover plate 150mm complete all as specified and as directed.

Taking down of Chowkats or frames with shutters (Without taking off shutters from the frame) not exc 1.5Sqm all as specified and as directed.

S & F in repairs galvanised mild steel wire cloth 0.56mm nominal dia of wire and average width of aperture 1.18mm and fixed with tinned tacks, or galvanised wire staples complete all as specified and as directed.

S & F sheet glass ordinary quality 4mm thick in square exc 0.50sqm each pane glazing with oil putty , clip in metal frame and wooden beading in wooden frame complete all as specified and as directed.

S &F stainless steel 75mm butt hinges for doors complete all as specified and as directed.

S & F 75mm size extruded aluminium alloy handles fabricated type with plate anodized complete all as specified and as directed.

S & F 75mm long aluminium anodised barrel tower bolt and extrude section and fixed complete all as specified and as directed.

S & F solid PVC door frame of size 50mm x 47mm made out of 5mm plain colour PVC sheet, reinforced with MS square tube and fixing in position with hold fast, complete all as specified and as directed. (cost of hold fast included in the unit rate of this item)

S&F factory made solid panel PVC door shutter 30 mm thick (style) consisting of frame made out of M.S tubes for top & bottom rails. M.S. frame shall be covered with heat moulded plain colour PVC 'C' channel having a PVC sheet strip of 20 mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side colour PVC sheet to be fitted in the M.S frame welded/sealed to the stiles & rails with suitable PVC sheet beading, and joined together with solvent cement fixed to frame, including two nos tower bolts / Handles for each shutter all as per specification & drawing complete all as specified and as directed.

S & F 100mm size extruded aluminium alloy handles fabricated type with plate anodized complete all as specified and as directed.

S & F 100mm long aluminium anodized barrel tower bolts of extruded section complete all as specified and as directed.

S &F coloured non skid tiles 7 to 8mm thick (Square / rectangular ) area of each tile exceeding 0.18 sqm but not exc 0.36 Sqm in skirting / dado etc set and joined in neat cement slurry and pointed in white cement or coloured cement to match over and including 10mm thick screed bed in cement mortar 1:6 complete all as specified and as directed.

Demolition and breaking up drain pipes 150mm bore (Salt Glazed ware, AC or Reinforced concrete) set in cement mortar complete all as specified and as directed.

Excavation over areas n exc 1.5m deep and getting out in hard / dense soil complete all as specified and as directed.

S & F 150mm bore Salt Glazed stone ware drain pipe laid in trenches and joints complete all as specified and as directed.

M & L for Concrete bed type D2, 1:4:8 (using 40mm graded crushed stone aggregate) to 150mm bore drain pipes including packing under, and haunching against the sides of pipes after they are laid and tested complete all as specified and as directed.

Returning, filling in, including spreading, levelling, watering and well ramming in layers not exc 25cm in Hard / Dense soil complete all as specified and directed.

Removing excavated soil n exc 50m and depositing where directed at a lvel n exc 1.5m above the starting point complete all as specified and as directed.

Taking down carefully the existing unserviceabl batten / conduit / concealed type aluminium point wiring for light , fan , socket 5 Amps and 15 Amps complete removing the same including fittings / fixtures and making good the disturbed surface of walls, floors, ceiling etc complete all as specified and as directed.

Taking down Unserviceable main switch / DB, Teak wood boards etc complete all as specified and as directed.

M&L for point wiring in concealed with PVC insulated, unsheathed, single core multistandard copper conductor cable (FRLS) of size 1.5 Sqmm, 1100 volts grade including 1.5 Sqmm PVC insulated, unsheathed, copper conductor cable for earth continuity wire to be drawn through in and including PVC conduit medium grade ISI marked with its acessories & pressed steel terminal boxes and providing 3 mm thick ISI marked laminated sheet cover and brass screws with cup washers for fixing switches / socket / regulators etc including all necessary wall cutting chases and making good disturbed surfaces in cement mortar 1:3 for one light/CB point controlled by one switch, complete all as specified and as directed.

All as per item No 104 above but for one ceiling fan / Exhaust fan point controlled by one switch complete all as specified and as directed.

All as per item No 104 above but for one 3pin 5 Amps socket out let point on independent board complete all as specified and as directed.

All as per item No 104 above but for one 3pin 5 Amps socket out let point on same board with other switches complete all as specified and as directed.

All as per item No 104 above but with cable 2.5sqmm including 2.5sqmm cble as earth wire for 15/16 Amp socket point complete all as specified and as directed.

M & L for switch piano flush type single pole one way 5 Amps all as specified and as directed.

M & L for switch socket combination 2 in 1, 3pin 5 Amp flush type universal all as specified and as directed.

M & L switch socket out let 2 in 1, 3 pin 5 Amps all as specified and as directed.

M & L switch socket combination 2 in 1, 3 pin 15 Amps flush type univeral all as specified and as directed.

M & L ceiling rose surface bakelite 65 x 50mm two to three terminals all as specified and as directed.

S & F MCB single pole 'C' curve 240 volts rating 6 to 32 Amps all as specified and as directed.

S & F MCB single pole Neutral 'C' curve 240 volts rating 32 Amps all as specified and as directed.

S & F MCB triple pole and neutral 'C' curve 240 volts rating 63 Amps all as specified and as directed.

S & F sheet metal enclosure (for DB's when MCbs to be used) triple pole and neutral Double door, 4 way 415 volts IP 43 protection complete all as speciifed and as directed.

S & F sheet metal enclosure (for DB's when MCbs to be used) single pole and neutral Double door, 12 way 240 volts IP 43 protection complete all as speciifed and as directed.

S & F LED lights fitting 1 x 20watt, 220V, AC decorative box type with driver, holder including LED tube light connecting up with three core flexible copper conductor cable of suitable size from ceiling rose complete all as specified and as directed.

S & F recess mounted 36 watt 2' x 2' extruded aluminium housing with milky diffuser recess mounting ultra slim LED panel integrated electronic driver of operating voltage 110 to 265 volts of make C & S Cat No LTCRSLM36WATT2X2 / Bajaj Cat No BCTBLR-36W LED FP CW / Crompton Greaves Cat Part No LCPL-36-CDL (2x2) or equivalent in Philips / Jaquar / Wipro complete with all accessories including connecting up with twin core twisted flexible copper conductor cable of suitable size 24/0.2mm and taking down old unserviceable tube light fittings complete all as specified and as directed.

M&L sub main wiring concealed type with three runs of single core, PVC insulated, unsheathed multi stranded copper conductor cable of size 6 Sqmm, 1100 volts grade (FRLS) and one run of 6 Sqmm PVC insulated multi stranded copper conductor for earth continuity conductor drawn through and including suitable size ISI marked rigid PVC conduit with all necessary accessories such as bends, tees, junction boxes, elbows complete all as specified and as directed. (Note :- Three runs of 6 Sqmm cable, one run of 6 Sqmm continuity earth wire and one run of PVC conduit with all necessary accessories will be measured as one length).

M&L for earthing complete with GI earth plate electrode 60 cm x 60 cm x 6 mm thick burried directly in ground (earth plate not less than 2.25 Metre deep below ground level) with top edge of the plate not less than 1.5 metre below normal ground level connected to galvanished earth wire 4.0 mm dia by means of bolts, nuts check and washers of GI or steel all as shown in electrical plate No. 3 of SSR Pt -I connected to earthing test point all as specified or indicated including GI pipe 15 mm dia light grade for earth wire protection, necessary excavation, earth work in any type of soil, PCC (1:3:6) type C-1 (with 20mm graded stone aggregate),chamber and 50mm thick precast RCC (1:2:4) cover slab re-inforced with XPM Jalli including necessary earth work in excavation, returning filling and removal of surplus earth upto a distance not exceeding 50 m etc all as shown on electrical plate No. 3 of MES Schedule Part-I(2009) complete including testing on completion all as specified and as directed .

M.VENKATARAMANAPPA AND COMPANY