Loading…
Loading…
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹9.2 LAccepted-AOC | ₹9.2 L Quoted ₹9.4 L | L1 | Accepted-AOC BEING LOWEST |
| 2 | L2₹11.0 LRejected-Finance 205 PARSHAV VIHAR PLOT NO 50 IP EXTN PARPARGANJ DELHI 110092 | SHAHDARA | DELHI | 110092 | ₹11.0 L | L2 | Rejected-Finance NOT BEING LOWEST |
| 3 | Rejected-Technical H NO 597 SEONA ROAD RANJIT NAGAR PATIALA PB 147001 | PATIALA | PATIALA | PUNJAB | 147001 | - | - | Rejected-Technical Not enlisted in required category i.e c (iii) |
| Sl No | Description | Qty | Unit | SANJEEV ENTERPRISES L2 | M/S NRS TIIB AND CO L1 |
|---|---|---|---|---|---|
| 1.00 | Overall preventive maintenance and regular maintenance of electrically operated over head travelling cranes (EOT) double girder type of 15 tonne capacity 02 Nos and 5 tonne capacity 01 No comprising of electric motors for long travel, hoist motion, creeping micro speed and electrical control panels consisting of MCCBs/main switches, step down transformers, contactors, HRC fuses & mechanical wire rope with drum, brake units, gear boxes, oil levels, motor bed ends, electrical control cables etc. throughout the time period of the contract comprising of material, labour and T&P for routine, periodical, preventive maintenance or breakdown repair to make EOT crane functional all time complete all as directed by the Engr-in-charge. | 60 | PER JOB/VISIT | 8,000 ₹4.8 L | 7,000 ₹4.2 L |
| 1.01Note: (i) All lubricants incl Gear Oil 80W90, Fine quality Grease, spares and Unserviceable parts required for maintenance of cranes will be measured separately however labour work is inclusive in this item. The contractor shall check for any malfunctioning of the cranes during preventive maintenance. Preventive/regular maintenance to be performed for all cranes at least twice in a months, the contractor shall also be liable for maintenance and repair job as per fault/ defect occurrence without any extra cost. (ii) This item includes unlimited call response from contractor. Minor and Major break-down calls shall be attended within 12 hours from the time of intimation and Crane shall be made operational within 24 hours and 72 hours respectively without any extra charge. (iii) The maintenance of crane throughout the contract period shall be responsibility of contractor. Thus contractor should visit the site prior to bidding. (iv) Contractor is required to maintain breakdown/ rectification register duly signed by both parties i e Contractor and OC MR Bay/JCO,s incharge. (v) During checking/ inspection of EOT crane if any part found unserviceable replacement of same to be carried out after confirmation from Engr-in-Charge. (vi) During the visit trademens/workers will check every movable parts physically and tighten the all nuts/bolts and mark them with permanent marker upto the entire satisfaction of JE E&M/Engr-in-Charge. (vii) Contractor is fully responsible for safety of deployed person at site, all necessary tools, plants and safety equipments will be provided by contractor without any extra cost. If any mishappening happens with tradesman it will be sole responsibility of the contractor. (viii) During maintanance if any item found unserviceable which is not catered in the BOQ will be provided by department under schedule B upon intimation from the contractor, however, labour work is inclusive in this item. | |||||
| 2.00 | Material and labor for Load testing of double girder EOT Gantry cranes of 15 ton capacity at full load capacity including making arrangements of load complete all as directed by the Engr-in-charge. | 2 | EACH JOB | 19,000 ₹38,000 | 17,000 ₹34,000 |
| 3.00 | Material and labor for Load testing of Double Girder EOT Gantry crane of 5 ton capacity at full load capacity including making arrangements of load complete all as directed by the Engr-in-charge. | 2 | EACH JOB | 12,000 ₹24,000 | 10,000 ₹20,000 |
| 4.00 | Supply only in replacement step down transformer suitable for 15 & 5 ton EOT gantry complete all as specified and as directed | 2 | EACH | 7,000 ₹14,000 | 6,000 ₹12,000 |
| 5.00 | Supply only in replacement brake liners of electro thruster brake assembly for crane of capacity 15 & 5 ton complete all as specified and as directed | 2 | EACH | 4,000 ₹8,000 | 4,000 ₹8,000 |
| 6.00 | Supply only in replacement contactor 3 phase, 415 volts, 30 Amps, type ML 2 complete all as specified and as directed. | 3 | EACH | 4,500 ₹13,500 | 3,800 ₹11,400 |
| 7.00 | Supply only in replacement contactor 3 phase, 415 volts, 16 Amps, type ML 1 complete all as specified and as directed. | 3 | EACH | 2,000 ₹6,000 | 1,500 ₹4,500 |
| 8.00 | Supply only in replacement contactor 3 phase, 415 volts, 12 Amps, type ML 0 complete all as specified and as directed. | 3 | EACH | 1,800 ₹5,400 | 1,300 ₹3,900 |
| 9.00 | Supply only in replacement breaking resister 415 Volts, 3 phase, for 15 HP Motor capacity complete all as specified and as directed | 2 | EACH | 14,000 ₹28,000 | 8,800 ₹17,600 |
Updated dates
Tender Value
Refer Docs
EMD Value
₹20,000
Closing Date
1 Dec 2025, 6:00 pmClosed
MAJ MOHAMMED AQIL AZEEM
GE NORTH PATIALA MILITARY ENGINEER SERVICES SANGRUR ROAD PATIALA CANTT
REPAIR/ MAINT TO EOT CRANES AND CONNECTED WORKS AT PATIALA MIL STN
2025_MES_738074_1
GE (N)/TOKEN-74/2025-2026
Open Tender
Civil Works
365 days
PATIALA
AS PER TENDER DOCUMENTS
9 documents required · 9 mandatory
₹500
GE N PATIALA
₹20,000
Yes
7 Jan 2026
1 Nov 2025
3 Dec 2025
1 Nov 2025
1 Dec 2025
17 Nov 2025
Amount
Overall preventive maintenance and regular maintenance of electrically operated over head travelling cranes (EOT) double girder type of 15 tonne capacity 02 Nos and 5 tonne capacity 01 No comprising of electric motors for long travel, hoist motion, creeping micro speed and electrical control panels consisting of MCCBs/main switches, step down transformers, contactors, HRC fuses & mechanical wire rope with drum, brake units, gear boxes, oil levels, motor bed ends, electrical control cables etc. throughout the time period of the contract comprising of material, labour and T&P for routine, periodical, preventive maintenance or breakdown repair to make EOT crane functional all time complete all as directed by the Engr-in-charge.
Note: (i) All lubricants incl Gear Oil 80W90, Fine quality Grease, spares and Unserviceable parts required for maintenance of cranes will be measured separately however labour work is inclusive in this item. The contractor shall check for any malfunctioning of the cranes during preventive maintenance. Preventive/regular maintenance to be performed for all cranes at least twice in a months, the contractor shall also be liable for maintenance and repair job as per fault/ defect occurrence without any extra cost. (ii) This item includes unlimited call response from contractor. Minor and Major break-down calls shall be attended within 12 hours from the time of intimation and Crane shall be made operational within 24 hours and 72 hours respectively without any extra charge. (iii) The maintenance of crane throughout the contract period shall be responsibility of contractor. Thus contractor should visit the site prior to bidding. (iv) Contractor is required to maintain breakdown/ rectification register duly signed by both parties i e Contractor and OC MR Bay/JCO,s incharge. (v) During checking/ inspection of EOT crane if any part found unserviceable replacement of same to be carried out after confirmation from Engr-in-Charge. (vi) During the visit trademens/workers will check every movable parts physically and tighten the all nuts/bolts and mark them with permanent marker upto the entire satisfaction of JE E&M/Engr-in-Charge. (vii) Contractor is fully responsible for safety of deployed person at site, all necessary tools, plants and safety equipments will be provided by contractor without any extra cost. If any mishappening happens with tradesman it will be sole responsibility of the contractor. (viii) During maintanance if any item found unserviceable which is not catered in the BOQ will be provided by department under schedule B upon intimation from the contractor, however, labour work is inclusive in this item.
Material and labor for Load testing of double girder EOT Gantry cranes of 15 ton capacity at full load capacity including making arrangements of load complete all as directed by the Engr-in-charge.
Material and labor for Load testing of Double Girder EOT Gantry crane of 5 ton capacity at full load capacity including making arrangements of load complete all as directed by the Engr-in-charge.
Supply only in replacement step down transformer suitable for 15 & 5 ton EOT gantry complete all as specified and as directed
Supply only in replacement brake liners of electro thruster brake assembly for crane of capacity 15 & 5 ton complete all as specified and as directed
Supply only in replacement contactor 3 phase, 415 volts, 30 Amps, type ML 2 complete all as specified and as directed.
Supply only in replacement contactor 3 phase, 415 volts, 16 Amps, type ML 1 complete all as specified and as directed.
Supply only in replacement contactor 3 phase, 415 volts, 12 Amps, type ML 0 complete all as specified and as directed.
Supply only in replacement breaking resister 415 Volts, 3 phase, for 15 HP Motor capacity complete all as specified and as directed
Supply only in replacement breaking resister 415 Volts, 3 phase, for 7.5 HP Motor capacity complete all as specified and as directed.
Supply only in replacement limit switch, 40 amps rating with one NO & one NC for long travel & cross travel complete all as specified and as directed
Supply only in replacement limit switch, 40 amps rating with rotary gear of main hoist complete all as specified and as directed
Supply only in replacement wheel bearing size 6207 after taking down unserviceable / worn-out wheel bearing as existing at site complete all as specified and as directed.
Supply only in replacement variable speed drive in weather proof sheet metal enclosure as per existing make and model suitable for electric operated crane 15 ton capacity of 18 HP crane installed at site to control cross travel speed and making necessary connections including testing complete all as specified and directed.
Supply and fixing wheel bearing size 6207 after taking down unserviceable / worn-out wheel bearing as existing at site complete all as specified and as directed.
Supply only in replacement control cable, 1.5 sq mm 4 core, multistranded copper conductor, unarmoured, 1100 volt grade,FRLSH PVC insulated PVC sheathed with supporting steel/GI wire for fixing complete all as specified and as directed.
Supply only in replacement control cable, 2.5 sq mm 4 core, multistranded copper conductor, unarmoured, 1100 volt grade,FRLSH PVC insulated PVC sheathed with supporting steel/GI wire for fixing complete all as specified and as directed.
Supply only in replacement control cable, 1.5 sq mm 16 core, multistranded copper conductor, unarmoured, 1100 volt grade,FRLSH PVC insulated PVC sheathed with supporting steel/GI wire for fixing complete all as specified and as directed.
Supply only in replacement steel wire rope 12 mm dia with hemp core rope made in 6x36 pattern length of existing make & specification suitable for 5 ton capacity gantry fixed with suitable size 'D' clamp, nuts, bolts and washers complete all as specified and directed.
Supply only in replacement steel wire rope 22 mm dia with hemp core rope made in 6x36 pattern length of existing make & specification suitable for 15 ton capacity gantry fixed with suitable size 'D' clamp, nuts, bolts and washers complete all as specified and directed
Supply only transformer oil all as specified and directed by Engr-in-Charge.
Supply only fine quality grease (all purpose) over the moving parts/rail/gears of EOT cranes all as specified and directed by Engr-in-Charge.
Supply only of gear oil 80W90 all as directed by Engr-in-Charge.
M&L for painting by using spray painting method for crane ( EOT ) double girder type of 15 Ton capacity 2 Nos with two coats of superior quality synthetic enamel paint over one coat of red oxide primer after cleaning of existing surface ,removing rust complete all as specified and directed by Engr-in-Charge.
M&L for painting by using spray painting method for crane ( EOT ) double girder type of 05 Ton capacity 2 Nos with two coats of superior quality synthetic enamel paint over one coat of red oxide primer after cleaning of existing surface ,removing rust complete all as specified and directed by Engr-in-Charge.
M&L for dismantling of unserviceable rotating shaft & keyways from travelling crab and transporting to & fro to workshop for checking & repairing and making new keyways including inserting new key as per existing/site requirement for fully making functional of EOT crane complete all as directed by Engr-in-Charge.
SANJEEV ENTERPRISES (BID ID -3480083)
stage.html
html • 0.04 MB
tech_eval.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Tendernotice_1.pdf
PDF • 1.76 MB
TENDERDOCUMENTS.pdf
Tender Documents • 2.08 MB
BOQ_826446.xls
BOQ • 3.10 MB
Download all tender documents and submit your bid