SPECIAL REPAIRS TO BLDG NO TWG/149 AT 935 IFSU UNDER GE TAWANG

Amount

Dismantling plain or corrugated steel sheeting any thickness, any gauge, thickness, including nainital or similar pattern roof covering complete all as specified and directed.

S&F pre-painted galvalume aluminium zinc coating GI based corrugated steel sheet 0.5mm thick of an colour having tensile strength of 550 Mpa as in roof covering/cladding to wall fixed with self tapping screws complete all as specified and directed.

S&F pre-painted galvalume aluminium zinc coating GI based plain steel sheet 0.5mm thick of an colour having tensile strength of 550 Mpa as in roof covering/cladding to wall fixed with self tapping screws as complete all as specified and directed.

Fixing only galvanised, corugated mild steel sheeting with two corrugations side lap, fixed with coach screws and washers, in roofs, walls etc. with grade of zine coating 275. complete all as specified and directed.

M&L for preparation of old painted surfaces and apply one coat of synthetic ennamel paint of steel surfaces of any description over 10 cm width or girth,not otherwise described complete all as specified and directed.

Dismantaling timber scantling 40sqcm as in unframed work and over in sec in any position complete all as specified and directed.

M&L II class HW clean swan timber framed work as in scantling complete all as specified and directed.

Demolition of stone slabs of any description or thickness in floor, apons etc and bedded & pointed in cement moter and disposing off debris out of MOD land complete all as specified and directed.

M&L for machine cut kota stone slab flooring 20-25 mm th over cement screed base laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab incl cutting, rubbing and polishing to receive mirror finish over 15 mm th screed bed in CM 1:6 complete all as specified and directed.

Taking down chowkhats or frame exc 1.5 sqmtr but n.exc 4 sq m(without taking off shutters from frames) complete all as specified and directed.

Taking down chowkets or frame with shutter (without taking off shutters from the frame) n.exe 1.5 sqm each complete all as specified and directed.

S&F II class HW plain solid straight chowkhats and frame wrought framed rebated on the soild rounded or chamfered put together with glue pinned at joints complete all as specified and directed

S&F 35mm thick, 2nd class HW plain framed panelled shutters (any number of panels) with panels of timber float on both side (feather edged) or of veneered panticle board medium density wood particle board with commercial face veneers, supplied and fitted to chowkhats complete all as specified and directed.

S&F 30mm th 2nd class hard wood glazed and skelton shutter open rebated and prepaid to receive glass gauze etc, divieded into squares (with sash bar), edges of plain, chamfered or rounded fitted with cut and mitred beads for secuering glass excecter size of members of shutter as specified in SSR part-I, sec 8 clause 8.24(a) complete all as specified and directed.

Dismantling of wall and celling boards in any thickness incl cover fillets complete all as specified and directed.

M/L galvanized iron snap grid with powder coated section of size 24mmx38mmx0.7mm thick ‘T’ section and 25mmx25mmx 0.35mm thick wall cleat of angle section and 4mm dia galvanized iron wire suspended with 4mm thick non AC board of Make : Zipro/ M/s EVEREST Industries Ltd of size 600mmx600mm and shall be fixed to galvanized iron snap grid of above section with mild steel screws as per manufacturer’s instructions including two coats of distemper oil emulsion over a coat of cement primer complete all as specified and directed.

M&L for 6mm thick plywood, grade BWR, type BB fixed with nails with timber framework in wall only complete all as specified and directed.

All as per item No 17 above but 4mm thick ply on ceiling complete all as specified and directed.

M&L for applying two coat of synthetic enamel paint over a coat of pink primer on wood/plywood based materials of over 10cm width or girth complete all as specified and directed.

Dismantling boarding any thickness fixed in any position with nails complete all as specified and directed.

M&L second class HW clean swan boarding, 50mm thick, with butt joints ln any situation fixed with nails complete all as specified and directed.

Dismantling of floor,hearth or wall tiling,including cement morter bedding (but not backing)removing,serviciable tiles to store and rubbish off the premises complete all as specified and directed.

M&L for glazed coloured ceramic tiles in vertical surfaces 350x250x7mm or 450x350x7mm thick set and jointed in neat cement slurry and pointed in coloured cement to match complete all as specified and directed.

M&L non-skid ceremic tiles 7 to 8mm th (square / rectangular) area of each tile exc 0.18sqm but n.exc 0.38 sqm, in floor etc set and jointed in neat cement slurry and pointed in white or coloured cement to match complete all as specified and directed.

Materials and Labour for non skid ceramic coloured tiles of 7 to 8 mm thick (square/rectangular) area of each tile exceeding 0.06 sqm but not exceeding 0.11 sqm, as in floors etc, set and jointed in neat cement slurry and pointed in white or coloured cement to match the coloure of tiles complete all as specified and directed

M/L for prepolished coloured, chequered, cement concrete tiles of size 300mm x 300mm x 25mm thick set jointed and pointed in neat cement slurry using grey cement with pigments etc as required complete as per manufacturer’s instructions and complete all as specified and directed. (Make : Mehtab/Topaz/Ultra Tiles/Gems/Multiwyn Tiles Co/Hero Tiles as approved)

M&L screed bed or bedding layer of mortar (1:4) 15mm thick for laying floor finishers complete all as specified and directed.

Demolition of precast concrete block/stone boulder walling built in C.M.complete all as specified and directed.

M & L for PCC (1:3:6) type C-1 using 20 mm graded stone aggregate solid building block set in cement mortar 1:6 in walls complete all as specified and directed.

Material and labour for rendering 15mm thick cement plaster in cement mortar (1:6) on unfair faces of brickworks complete all as specified and directed.

M&L for preparation of newly plasted surfaces of wall and applying a coat of primer preparatory to distempering and applying two coats of distember complete all as specified and directed.

Demolition of PCC floor and pavings nexc 15cm thickness including floor finishes like tiles if any of any description. (below or above ground level) complete all as specified and directed.

Material and labour for 75 mm 1:3:6 type C2 ( using 40 mm graded stone aggregate) as plinth protection./paving/footpath complete all as specified and directed.

S&F 100mm long butt hinges medium grade cold rollled mild steel and fixed complete all as specified and directed.

S&F aluminium anodised barrel tower bolts 150 mm of extruded section and fixed complete all as specified and directed.

S&F 150 mm long aluminium handles cast type anodised complete all as specified and directed.

S&F aluminium alloy anodised sliding door bolt 250mm long with hasp, staple and fixing clip of sheet cast or extruded sections and fixing bolts complete all as specified and directed.

S&F MS butt hinges medium weight 75mm long complete all as specified and directed.

S&F MS plain sheet 1mm th in covering to door shutter or covering to door chowkhats etc. complete all as specified and directed.

S&F aluminium anodized barrel tower bolts, extruded section 125mm long complete all as specified and directed.

S&F aluminium anodized handles, D type,100mm long complete all as specified and directed.

M&L 3mm thick sheet glass ordinary quality and glazing with oil puty in square nexc 0.5 sqm in each pane complete all as specified and directed.

S&F in repair bib taps 15mm bore dia,cast copper alloy with crutch or butter fly handle,screwed down,screwed for iron pipe or for brass ferrule and fixed complete complete all as specified and directed.

S&F 20mm outer dia 3-layer PP-R poly propylene random copolymer pipes SDR 7-4(PN-16) UV stabilized and antimicrobial fusion welded having thermal stability for hot & cold water supply including PPR plain & brass threaded polypropylene random fitting fixed complete to walls,ceilings or laid in floor complete all as specified and directed.

S&F stop cock fancy type 15mm dia CP high pressure with crutch or butterfly handle screwed both ends for iron pipe or for union complete all as specified and directed.

S&F in repairs CP Pillar taps 15 mm bore, cast copper alloy, with capstan heads screwed down high pressure, with or without lettered `Hot' or `Cold' with long screwed shanks & fly-nuts, screwed for iron pipe, complete all as specified and directed. Make : Esco. (Note : Contractor should resolve the complain within 24 Hrs and should give feedback to the Engineer in charge).

S & F in repair CP health faucet along with one mtr long flexible tube and holding stand including all necessery fitting complete all as specified and directed.

S&F in repairs soap dish any type fixed to plugs with cromium plated brass screw complete all as specified and directed.

S&F in repairs tubular towel rail aluminium anodised 20 mm dia 60 cm long between flanges complete all as specified and directed.

S&F in repair stop valves 15mm bore dia,cast copper alloy screwed down,high, pressure with crutch or butterfly handle screwed both ends for iron pipe or for unions and fixed complete.

M&L PVC (SWR) floor trap with grating including jointing withsolvent cement of 75mm dia complete all as specified and directed.

S&F PVC connector 15mm size with PTMT nuts of length 300mm complete all as specified and directed.

M&L for RCC 1:2:4 type B-1 using 20mm grd aggregates as in beams/lintel (UB & LB etc) complete all as specified and directed.

Formwork to sides and soffits of floor or roof beams, beam haunch- ings, girders, bressummers, lintels, cantilevers, shelves including sup- ports, overhangs, etc. complete all as specified and directed.

S&F in repair vitreous china wash down water closet pan (pedestal pattern) white with "P" or "S" Trap front or back inlet fixing bols, PVC seat cover and making all necessary connection complete all as specified and directed.

S&F for 10Ltr PVC valveless, syphonic action type, flushing cistern, low level, white, with inlet, ball valve, float and handle including brackets complete all as specified and directed.

S&F in repairs vitreous china wash basin, white, flat back, size 630x450mm with coupling excluding taps, waste, chain and plug and porcelain stopper but including brackets white incl 32/40mmdia 90cm long PVC waste down pipe complete all as specified and directed.

S&F 500 ltrs rotational moulded polyethylene water storage tanks ( cylindrical vertical with closed top ) hoisted and fixed in position all as specified in SSR part-I complete all as specified and directed.

S&F for mild steel TMT bars 10mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clip complete all as specified and directed.

Ditto as above but 5mm dia and over upto and including 10mm dia in stirrups, spacers and binders complete all as specified and directed.

Materials and labour for plain cement concrete (1:3:6) type C1 using 20 mm graded aggregate as in surface channels and drains wall complete all as specified and directed.

M&L for marble work green marble 18 to 20 mm thick (table rubbed and polished) in steps, jambs, pillars, window cills, cooking platforms and like in CM (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with marble shade including taking out old unserviceable one complete all as specified and directed.

S&F stainless steel sink 1 mm thk for kitchen with plug waste pipe washers incl cantilever cast iron brackets, connecting union to waste pipe etc including bedding in cement mortor on to dwarf wall overall size 495x420mm with bowl size 410mm x 330mm x160mm with 40 dia mm CP waste coupling in repairs complete all as specified and directed.

E/M Portion Taking down carefully copper/aluminum point wiring (light, fan, socket or power) complete including all fittings and fixtures such as switches, pendant, lamp holder,ceiling roses, regulators, switch socket outlet, bulk head fittings, tube light fittings etc and removing unserviceable materials from site of work and making good disturbed surfaces of walls, floors etc complete all as specified and directed.

Taking down carefully by unscrewing from board/outlet boxes, fittings and fixture such as main switches & DBs of any size and any capacity complete all as specified and directed

Dismantling and taking up or down old Unserviceable service cable and LT UG cable of any size complete all as specified and directed

M/L for point wiring with 2 single core HR FR / FRLS PVC insulated, unsheathed stranded copper conductor of size 1.5 sqmm in and including suitable size PVC casing & caping with PVC boxes and 3mm thick plastic laminated sheet top cover for light/fan/socket controlled by one switch complet with 1.5 sqmm PVC insulated unsheathed multistandard copper conductor 1100 volts grade green colour for earth continuity complete all as specified and directed.

All as per item No 68 here-in-before but for one 5 Amp socket outlet independent board complete all as specified and directed

All as per item No 68 here-in-before but for one 5 Amp socket outlet on the same board complete all as specified and directed

All as per item Ser No 68 above but for one 15 Amp socket outlet independent with 2 run of cable of size 4 sq mm and one run of 2.5 sq mm cable as earth continuity complete all as specified and directed.

Supply and fixing switch piano flush type single pole one way 5 Amp 240 volts complete all as specified and directed.

Supply and fixing for switch socket combination 2 in 1 , 5 pin 5 Amps flush type 240 volts complete all as specified and directed.

Supply and fixing for switch socket combination multipurpose 15 A flush type, 5 in 1 240 volts complete all as specified and directed.

S&F for ceiliing rose three terminal surface type bakelite 65x50 mm complete all as specified and directed.

Supply & fixing Surface and wall mounted LED batten up to1x22 watt extruded aluminium housing suitable for T8 Lamps with ultra bright LED tubelight (single side connection) 0f capacity 20 watt suitable for T8 fitting with G13 Lamp holder complete all as specified and directed. Make Havells Cat no REGALBATTENT8UPTO1x22WDSBSWH and PHOTONULTRA+1213T8SSTL20WLED865SPC & equivalent make specified.

S&F security LED light fittings, 1x40W LED luminiaries Complete with all acessories and including connecting upwith twin core twisted flexible copper conductor cable with suitable size of 230V, 50 HZ, 40mm light grade GI pipe with suitable clamps, nuts, bolts and all fitting accessories complete all as specified and directed.Make Havells Cat part No. ENDURAPEARLNEOSL40WLED757PASYTOPC & equivalent make specified.

S&F Lamp LED 1x10Watts complete all as specified Make Havells Cat part No.LED Adore Lamp 10W B22 CDL Ball Lamp LHLDERUEML & equivalent make complete all as specified and directed.

S & F Lamp holder, PVC/Polycarbonate type with back plate suitable for battern fittings complete all as specified and directed.

S&F MCB distrubution board SPN 8 way double door, sheet steel,phosphatised,powder coated with 200 amps bus-bar,neutral link,earth bar and din rail 240 V complete all as specified and directed.( for living sheltor)

Supply and Fixing MCB SPN 240V 40 Amps,10 KA complete all as specified and directed.

Supply and Fixing only MCB SP, 240V,6 to 40 Amps,10 KA complete all as specified and directed.

Supply and fix 1100 volts grade heavy duty cable PVC insulated aluminium stranded conductor,of size 10 Sqmm served with inner sheathing of PVC tape and overall PVC sheathed in service connections suspended by insulating hangers not more than 1 metre apart including4mm suspension wire, one twin core cable flat or circular complete all as specified and directed.

Supply and fix house service bracket (hook type complete with 3.0m long G.I. pipe 40mm dia Med. grade, two nos900 bends. M.S.hook and stay or guy complete all as specified and directed.

M & L for Tubes 'Light grade" galvanised 40mm for cable protection complete all as specified and directed.

M&L in replacement of circuit/submain wiring alongwith earth wire with the size of 2x4 Sqmm + 1x4.0 Sqmm earth wire of FRLS PVC insulated copper conductor, single core cable in surface/recessed as required in and including PVC casing caping complete fixing on wall, roof and floor complete all as specified and directed.

S & F air termination, single pointed copper rod 12mm dia and 300mm long complete all as specified and directed.

S & F test terminal block made of gun metal or phosphourus beonze size 75x75x25mm, drilled and screwed including 3 Nos , 8mm dia 25mm long hex. Head screw complete all as specified and directed.

S & F aluminium Strip 25 X 3.15 with saddles and fixing Screws ete for roof conductor and down conductor above ground complete all as specified and directed.

Materials and Labour for earthing complete with galvanized steel earth plate electrode 600 mm x 600 mm x 6.0 mm thick buried directly in ground end vertically to a depth not less than 2.25 meter deep below ground level with top edge of the earth plate at a depth not less than 1.5 M below normal ground level connected to galvanized earth lead wire4.0mm dia as earthing lead by means of bolts, nuts check nuts and washers of galvanized steel and connected to main switch board or main control board as directed and provision of concrete pit in PCC (1:3:6) type C1, pre-cast RCC (1:2:4) type B1, cover slab 54 cm x 54 cm x 5 cm, reinforced with 8 mm dia TMT bars @ 150 mm c/c both ways, one handle for lifting made out of 10 mm dia MS round bar, provision of funnel, wire mesh, 20 mm bore galvanized steel tubing (Medium grade) for watering, charcoal or coke and salt in alternate layers, 15 mm bore galvanized steel tubing (light grade) for protection of earth lead connection, including necessary excavation and earth work in any type of soil, dismantling and taking out old earthing plate and necessary testing complete all as shown on electrical plate No 5 of SSR Part –I (2009) complete all as specified and directed.

Materials and Labour for earthing complete with galvanized steel earth plate electrode 600 mm x 600 mm x 6.0 mm thick buried directly in ground end vertically to a depth not less than 2.25 meter deep below ground level with top edge of the earth plate at a depth not less than 1.5 M below normal ground level connected to galvanized iron strip 32x6mm as earthing lead by means of bolts, nuts check nuts and washers of galvanized steel and connected to main switch board or main control board as directed and provision of concrete pit in PCC (1:3:6) type C1, pre-cast RCC (1:2:4) type B1, cover slab 54 cm x 54 cm x 5 cm, reinforced with 8 mm dia TMT bars @ 150 mm c/c both ways, one handle for lifting made out of 10 mm dia MS round bar, provision of funnel, wire mesh, 20 mm bore galvanized steel tubing (Medium grade) for watering, charcoal or coke and salt in alternate layers, 15 mm bore galvanized steel tubing (light grade) for protection of earth lead connection, including necessary excavation and earth work in any type of soil, dismantling and taking out old earthing plate and necessary testing complete all as shown on electrical plate No 5 of SSR Part –I (2009) complete all as specified and directed.

M/S KHANDU CONSTRUCTION

M/S L G BUILDERS

M/S G M BUILDERS

M/S ARUNACHAL VIKASH

M/S KESANG CONSTRUCTION

M/S K D CONSTRUCTION