SPECIAL REPAIR TO OR MD ACCN BLDG NO P-16 (12 XQTRS) AT R ZONE OF OR MD ACCN OF INF (R and S) (WH) UNDER GE (E) FZR CANTT

Amount

Dismantling floor, hearth or wall tiling including cement morter beddind (but not backing removing seviceable tiles to store and rubbish off the premises

Material and labour non - skid Ceramic tiles coloured 7 to 8 mm thick (square/ rectangular),primium quality area of each tile exceeding 0.11 sqm but not exceeding 0.18 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match colour of tiles over and incl screed bedding 15mm thick in cm(1:6),complete all as specified and directed by Engineer-in-Charge.

All as per Item No-02 hereinbefore but as on vertical surfaces such as skirting/dado over and including 10 mm thick rendering in cement mortar (1:4), complete all as specified and directed by Engineer-in-Charge.

Material and labour ceramic coloured (colour & shade as approved) tiles non skid of size 300x300x 7mm thick as in floor set and jointed in neat cement slurry over and including 15mm thick screed in cement mortar (1:6) and pointed in white cement with pigment to match the colour of tiles complete all as specified and directed by Engineer-in-Charge.

Material and labour glazed ceramic tiles, coloured (colour as approved), of size 450x300x7mm thick on vertical surfaces such as in skirting/dado etc set and jointed in cement slurry over 10mm thick rendering in cement mortar (1:4) and pointed in white cement with pigment to match the colour of tiles complete all as specified and directed by Engineer-in-Charge.

Demolition of Stone slabs and tiles of any description or thickness in floors, aprons etc laid bedded and pointed in any mortor .

Material and labour Granite(of any type) tiles18- 20mm thick machine cut, bedded and jointed with grey cement slurry and pointed with white cement with admixture of pigment to match the shade of granite stone including 15 mm thick screed bed in back coat CM 1:4 complete including making circular gas pipe hole, moulding at corners and polishing type complete all as specified and directed by Engineer-in-Charge.

Demolition of un-reinforced cement concrete in any position complete all as specified and directed by Engineer-in-Charge.

Material and labour machine cut kota stone slab 18-20 mm thick as in flooring of size not less than 0.25 Square metre each, set and jointed in cement slurry over & including screed bed of 20 mm thick in cement mortar (1:6) and pointed in cement mixed with pigment to match the shade of slab including rubbing, cutting and polishing complete all as specified and directed by Engineer-in-Charge.

Material and labour 18 to 20 mm thick Baroda green marble in single piece incl nosing at front and sides in steps, jambs,pillars,window cills,CB platfoRMs,staircase and like with bull nosing in cm(1:4) incl pointing in white cement(1:2) using marble dust with admixture of pigment to match with marble shade including making grooves for slip guard or steps,edge moulding, including 15mm thick screed bed in cm 1:4 incl machine polishing to edge to finish etc complete all as specified and directed by Engr-in-Charge.

Material and labour machine cut kota stone slab 18-20 mm thick as in skirting,dado set and jointed in cement slurry over & including 10 mm thick rendering in cement mortar (1:4) and pointed in cement mixed with pigment to match the shade of slab including rubbing, cutting and polishing complete all as specified and directed by Engineer-in-Charge.

Providing edge moulding to 18-20mm thick stone of counters vanities etc. in Marble/ Granite stone any description including machine polishing to edge to give high gloss finish etc. complete.

Material and labour Cement concrete (1:3:6) type C-2 using 40 mm graded stone aggregate as in plinth protection, 75mm thick, surfaces finished even and fair without using extra cement as in plinth protection complete all as specified and directed by Engineer-in-Charge.

Taking down cement plaster or terrazzo from brick walls of any description, racking out joints, hacking for key, scrubbing down with water etc complete all as specified and directed by Engineer-in-Charge.

Material and labour for rendering/plastering, 15 mm thick in cement mortar (1:4) on brick or concrete surfaces, surfaces finished even and smooth without using extra cement complete all as specified and directed by Engineer-in-Charge.

Material and labour for 15mm thick rendering in cement mortar (1:6) on any face of brick walls or concrete surfaces, finished even and smooth without using extra cement complete all as specified and directed by Engineer-in-Charge.

Material and labour for 5mm thick rendering in cement mortar (1:3) on concrete surfaces, finished even and smooth without using extra cement as in ceiling complete all as specified and directed by Engineer-in-Charge.

Material and labour for preparation of new plastered wall surfaces and applying two coats of cement base paint over a white wash complete all as specified and directed by Engineer-in-Charge.

Material and labour for preparation of newly plastered surfaces of walls & applying two coats of OBD on chalk whiting on plastered surfases complete all as specified and directed by Engineer-in-Charge.

Material and labour for preparation of new surfaces of wall and applying two coats of white lime wash (white washing) on walls including corneces, pillars complete all as specified and directed by Engineer-in-Charge.

Material and labour for preparation of newly plastered surfaces of ceiling & applying three coats coats of white wash complete all as specified and directed by Engineer-in-Charge.

Taking down wooden chowkhats or frames with shutters (without taking off shutters from the frames) of size not exceeding 1.50 Square metre each including cutting holes in brick walls of appropriate size for insertion of cement concrete blocks for hold fasts complete all as specified and directed by Engineer-in-Charge.

All as per item No 22 above but size exceeding 1.5 Square metre and not exceeding 4 Square metre each.

Taking down shutters of any description,exc.1.0 sqm and not exc.2 sq. m each and after repair refixing in same opening.

Taking down shutter of any description of exceeding 1 sqm but not exc 2 Sqm complete all as specified and as directed

Supply and fixing pressed steel frames made of 1.25mm thick MS sheet of profile 105x60mm for door and window frames with one rebate including lock strike plate, shock absorber, 20mm dia 60mm long MS conduit for housing of a drop bolt, treating of internal surfaces of chowkhats with coal tar or black paint including hinges, hold fasts/lugs etc complete all as specified and directed by Engineer-in-Charge.

All as per item No 26 above but size 125x60mm with double rebate.

Material and labour for cement concrete (1:3:6), type C-1 using 20mm graded stone aggregate as in filling of steel chowkhats including necessary foRM work complete all as specified and directed by Engineer-in-Charge.

Material and labour for cement concrete (1:2:4) type B-I using 20mm graded stone agg. as in bed block of hold fast, coping incl. necessary foRM work complete all as specified and directed by Engineer-in-Charge.

Material and labour for Factory made, 35mm thick, 2nd class hard wood (Hollock), plain framed, panelled shutters, any number of panels, panels shall be of 12mm thick BWR glade veneered particle board medium density, wood particle board with commercial face veneers, size of members as specified in clause 8.20(a) of MES Schedule Part-I section-8 complete all as specified and directed by Engineer-in-Charge.

Material and labour for factory made 35 mm thick, 2nd class hard wood (Hollock), glazed and skeleton shutters open rebated and prepared to receive glass/ gauge etc (without sash bars), edges of framing plain chamfered or rounded, fitted with cut and mitered beads for securing glass etc for doors, size of members as specified in clause 8.24 (a) of MES Schedule Part-I Section-8, complete all as specified and directed by Engineer-in-Charge.

Supply and fixing solid PVC door frame of size 50 mm x 47 mm made of 5 mm plain colour PVC sheet reinforced with mild steel square tube complete all as specified in clause 8B.3.1 and shown on page 150 of MES Schedule Part-II (2010).

Supply and fixing factory made solid panel PVC door shutter 30 mm thick (style) consisting of frame made out of MS tubes for top & bottom rails, MS frame covered with heat moulded plain colour PVC ‘C’ channel having a PVC sheet strip of 20 mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail; paneling of plain colour PVC sheet to be fitted in the MS frame welded/sealed to the stiles & rails with suitable PVC sheet beading and jointed together with solvent cement, supply and fixing in the frame at site as per clause 8 B.2.1 of MES schedule Part-II (2004) complete all as specified and directed by Engineer-in-Charge.

Supply and fixing PTMT tower bolts, 200 mm long and fixed with steel screws complete all as specified and directed by Engineer-in-Charge.

Supply and fixing PTMT handle 125mm long fixed with steel screws complete all as specified and directed by Engineer-in-Charge.

Supply and fixing PTMT butt hinge, 100mm long, fixed with steel screws with brass/bronze hinge pin complete all as specified and directed by Engineer-in-Charge.

Supply and fixing factory made double rebate box type side hung steel window with glazed and mesh shutters with pintal hinges & 2 Nos 150 mm mild steel tower bolts to each shutter, steel handle with & without glazing bars, one side two shutters with glazing bars & other side glazed shutter with glazing bars including 8 mm mild steel guard bars dovetailed or welded and with framed with one shop coat of zinc chromate primer complete all as specified and shown on Drawing No CEJZ/TD-06/07 & CEJZ/TD-07/07. Note Wiremesh & glass will be measured separtely.

Supply and fixing factory made box type steel ventilator with glazing bars dovetailed or welded and with one shop coat of zinc chromate primer complete all as specified and shown on Drawing No CEJZ/TD-1019/08 sheet 1/3 to 3/3.

Supply and fixing mild steel framed work of as in grills/guard bars shouldered with steel window/ ventilator frames complete all as specified and directed by Engineer-in-Charge.

Hacking out old broken glass (any thickness, size, quality or description) from wooden/ steel frames, glazed with putty or fixed with beads complete all as specified and directed

Supply and fixing 3mm thick, plain sheet glass ordinary quality and glazing, with oil putty or with wooden beads (supplied alongwith shutters), in squares n.exc 0.50 Sqm complete all as specified and directed by Engineer-in-Charge.

Supply and fixing figured glass 4 mm thick pin head type and glazing with oil putty in squares n exc 0.5 sq. m in each pane complete all as specified and directed by Engineer-in-Charge.

Supply and fixing stainless steel wire cloth 0.36 mm nominal dia of wire and average width of aperture not more than 1.18 mm and fixed with stainless steel wire staples complete all as specified and directed

Supply and fixing in repairs stainless steel wire cloth 0.36 mm nominal dia of wire and average width of aperture not more than 1.18 mm and fixed with stainless steel wire staples complete all as specified and directed

Supply and fixing aluminium tower bolt of extruded section, 150mm length of bolt and fixed with screws, complete all as specified and directed by Engineer-in-Charge.

Supply and fixing 125mm size, aluminium (cast type) anodized, handle and fixed with screws complete all as specified and directed by Engineer-in-Charge.

Supply and fixing 250mm long aluminium alloy, anodized, sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts of extruded sections or cast aluminium alloy and fixed with screws complete all as specified and directed by Engineer-in-Charge.

Material and labour for preparation of new steel surfaces of any description, over 10cm width or girth and applying two coats of synthetic enamel paint over primed steel surfaces complete all as specified and directed by Engineer-in-Charge.

Material and labour for preparation of new wooden or wood based surfaces of any description, over 10cm width or girth and applying two coats of synthetic enamel paint over a coat of pink primer complete all as specified and directed by Engineer-in-Charge.

Dismantling timber in fillets, rails, posts, rafters, purlins, etc; under 40 sq. cm in each section, fixed in any position as in framed work complete all as specified and directed by Engineer-in-Charge.

Supply and fixing framed mild steel work of grade E-165 (Fe-290) as in framed work such as doors, gates or frame for cooler stand with gusset plates, rails, braces etc, drilled for fixing of sheeting or other covering of door etc, to be prepared for hanging or sliding etc including either hooks and hinges or steel hanging door fittings and hanging and fixing complete all as specified and directed by Engineer-in-Charge.

Supply and fixing pre painted galvatume aluminum zink coating GI based plain steel sheet 0.50 mm thick of an colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws as specified

Dismantling of boarding as in shelves complete all as specified and directed by Engineer-in-Charge.

Material and labour for 18-19mm thick pre-laminated particle board, flat pressed single layer type or three layer type with BWR type adhesive, medium density interior grade having one side decorative lamination and other side balancing white lamination as in cup board shutter/shelves including 6 mm thick teak wood leaping on three sides and 20mm thich on hanging side & French polishing to edging complete all as specified and directed by Engineer-in-Charge.

Continous (piano) hinges of mild steel bright finish or electro galvanised with flap (when open) 30mm,fixed with steel screw complete all as specified and directed by Engineer-in-Charge.

Supply and fixing hasp and staple of aluminium anodized, safety type, 100mm long, fixed with screws complete all as specified and directed by Engineer-in-Charge.

Supply and fixing mild steel butt hinge, 100 mm long, medium weight, cold rolled fixed with steel screws or welded to steel frame where required complete all as specified and directed by Engineer-in-Charge.

Supply and fixing in repairs decorative mild steel coloured curtain rod of 20 mm dia PVC coated approved pattern & design including side cups, powder coated mild steel flat iron brackets fixed with steel screws & PVC rawl plugs, complete all as specified and as directed

Supply and fixing in rep Stainless steel plate rack of standard pattern & of size (as per approved sample) 600 x 750mm.The thickness of stainless steel sheet shall be 1.00 mm & grade of sheet shall be 304 AISI including fixing to wall with 4 Nos 50mm screws & PVC rawl plugs complete all as specified and directed by Engineer-in-Charge.

Taking up or down existing steel water tubing, 15mm bore alongwith connections fixed/laid in any situation, complete all as specified

Taking up or down existing steel water tubing, 20mm bore alongwith connections fixed/laid in any situation, complete all as specified

Supply and fixing galvanised iron steel water tubing, 15mm bore, medium grade with all fittings and fixed to walls and ceilings or laid in floors complete all as specified and directed by Engineer-in-Charge.

Supply and fixing galvanised iron steel water tubing, 20mm bore, medium grade with all fittings and fixed to walls and ceilings or laid in floors complete all as specified and directed by Engineer-in-Charge.

Fixing only, after cleaning old steel water tubing, 15mm bore and connections in new or old position using new fittings complete all as specified and directed by Engineer-in-Charge.

Fixing only, after cleaning old steel water tubing, 20mm bore and connections in new or old position using new fittings complete all as specified and directed by Engineer-in-Charge.

Supply and fixing in rep 300mm Mild steel helical door spring including roller and roller plate complete all as specified and directed by Engineer-in-Charge.

Supply and fixing towel rail, 19mm dia brass chromium plated, 600mm long with fancy type brass chromium plated brackets on both sides and fixed with steel screws and wooden/rawl plugs as in repair complete all as specified and directed by Engineer-in-Charge.

Supply and fixing PVC low level flushing cistern (white) of 10 liters capacity with inlet ball float valve, PVC flush pipe and necessary fixing arrangements and connecting to water pipe and WC etc and fixed in repairs complete all as specified and directed by Engineer-in-Charge.

Supply and fixing 500 litres capacity rotational moulded, triple layer polythene water storage tanks (cylindrical vertical with closed top) hoisting and fixed in position on roofs including fittings & dismantling existing water storage tank, including Supply and fixing 20mm bore PTMT ball valve high pressure with polythene float and fly nut complete, screwed for iron pipe or brass ferrule and fixed, complete all as specified and directed by Engineer-in-Charge.

Supply and fixing in repair stop cock 15 mm cast copper alloy screwed down high pressure with crutch or butterfly handle, screwed both ends for iron pipe etc.

Supply and fixing in repair Bib tap long body of CP brass, 15mm bore, fancy type long body screwed down, screwed for iron pipe or for brass ferrule complete all as specified and directed by Engineer-in-Charge. .

Supply and fixing vitreous china white squatting pan orrissa pattern of size 580mm x 440 mm with integral foot rests including necessary lime concrete and 100 mm bore cast iron ‘P’ or 'S' trap with 550 to 600 mm long neck for connecting WC to branch piece with cement joints, fixed as in repair, complete all as specified and directed by Engineer-in-Charge.

Supply and fixing in repair Viterous China wash down water closet pan (pedestal pattern), white incl. Seat and cover & CP jet (excluding fixing bolts, flushing cistern and flush pipe) complete all as specified and directed

Supply and fixing 15mm bore stop valves/angle cock of cast copper alloy, screwed down, high pressure with crutch or butter fly handle, fancy type, chromium plated, with long shank and cup (concealed type) fixed in repairs complete all as specified and directed by Engineer-in-Charge.

Supply and fixing wash hand basin, flat back 450x300mm vitreous china (white) including PTMT waste fittings, 32mm bore size, waste pipe, PVC, 32mm bore, angle iron/cast iron brackets of required size as directed & making good disturbed surfaces to match with the existing as in repair complete all as specified and directed by Engineer-in-Charge.

Supply and fixing in repair 15mm bore pillar tap, cast copper alloy, with capstan heads, chromium plated, screwed down high pressure, with or without lettered ‘Hot’ or ‘Cold’ with long screwed shanks and fly-nuts, screwed for iron pipe complete all as specified and directed by Engineer-in-Charge.

Supply and fixing low density polythene pipe (LDPE) of pressure rating 6 Kg per Sq.cm, 450mm long, heavy duty with two sets of brass nuts & washers (one at each end)etc suitable for 15mm bore of pipe complete all as specified and directed by Engineer-in-Charge.

Supply and fixing low density polyethylene (LDPE) pipes 32mm bore of pressure rating 6 kgf/sq. cm complete all as specified and directed by Engineer-in-Charge.

Dismantling CI pipe alongwith fittings of 75/100mm dia, below or above ground level or laid in floors, jointed in cement mortar and taking out complete all as specified and directed by Engineer-in-Charge.

Supply and fixing 75mm dia PVC (SWR) pipes single socketed, in any length with rubber ring joints, laid in trenches or in floors complete all as specified and directed by Engineer-in-Charge. (fitting measured separately).

Supply and fixing 75mm bore PVC (SWR) floor trap, plain with grating including jointing with solvent including jointing to waste pipe in run lead as in repairs complete all as specified and directed by Engineer-in-Charge.

Supply and fixing 75 mm bore PVC (SWR) branch piece, single (single Y) equal or unequal complete all as specified and directed by Engineer-in-Charge

Supply and fixing 75 mm bore PVC (SWR) bends any radius complete all as specified and directed by Engineer-in-Charge

Supply and fixing in repair 110 mm bore PVC (SWR) pipes single socketed, in any length with rubber ring joints, fixed to walls including distance pieces and stack clamps as in rain water pipes as in repair complete all as specified and directed by Engineer-in-Charge.

Supply and fixing 110 mm bore PVC (SWR) branch piece, single (single Y) equal or unequal complete all as specified and directed by Engineer-in-Charge

Supply and fixing 110 mm bore PVC (SWR) bends/shoe any radius fixed to walls including distance pieces and stack clamps complete all as specified and directed by Engineer-in-Charge.

Supply and fixing in repair 1mm thick stainless steel sink with drainage board, plugs, washers, PVC waste pipe, union, CP coupling & fixed in RCC cooking platfoRM, overall size of sink 915mmx460mm, bowl size 410mmx330mmx160mm as in repair complete all as specified and directed by Engineer-in-Charge.

Supply and fixing 125mm dia CP brass shower rose with swivel joints, any colour including shower aRM 15mm dia, 195mm long with bend of 45 degree with flange of CP brass as in repair complete all as specified and directed by Engineer-in-Charge.

Material and labour for preparation of old decorated surfaces of wall and applying one coat of white lime wash (white washing) on walls including corneces, pillars complete all as specified and directed by Engineer-in-Charge.

Material and labour for preparation of old decorated surface of wall and applying one coat of oil emulsion distemper complete all as specified and directed by Engineer-in-Charge.

Material and labour for preparation of old decorated surface of wall and applying one coat of cement based paint including corneces, pillars etc complete all as specified and directed by Engineer-in-Charge.

Material and labour for preparation of old decorated surfaces on ceiling and applying one coat of white lime wash including cornice and pillars etc complete all as specified and directed by Engineer-in-Charge.

Material and labour for preparation of old painted wood or wood based surfaces of any description not otherwise described over 10cm width or girth and applying one coat of synthetic enamel paint complete all as specified and directed by Engineer-in-Charge.

Material and labour for preparation of old decorated surface of steel surfaces of any description not otherwise described over 10 cm width or girth and applying one coat of synthetic enamel paint complete all as specified and directed by Engineer-in-Charge.

Material and labour PCC (1:2:4) type B-0 using 12.5mm graded stone agg as in haunching, kerb in roof, sunken or similar work complete all as specified & directed.

Dismantling of brick tiles or terracing tiles single layer laid on roof jointed & pointed in cement mortar complete all as specified and directed

Demolition mud in roofs, any thickness, including plastering and leeping etc complete all as specified and directed

Material and labour for 15 mm thick rendering over concrete surface of sunken floor in CM 1:3 on wall as well as sunken floor finished even and smooth without using extra cement using WPC complete all as specified and directed by Engineer-in-Charge.(WPC measured and paid separetely)

Material and labour for cement concrete (1:5:10) type E-2 using 40 mm graded stone aggregate as in filling in sunkan slab or as in sub base, mass concrete complete all as specified and directed by Engineer-in-Charge.

Material and labour for rendering/screeding 10 mm thick cement plaster on roof surfaces in cement mortar (1:4) finished even and fair and using with water proofing compound complete all as specified and directed

Material and labour for water proofing treatment to sunken/roof surface including parapet wall comprising with the following course of treatment/ specifications foRM bottom to top:- (a) Applying evenly a tack coat of industrial bitumen 85/25 @ 1.2 kg per sqm over a coat of bitumen primer @ 0.30 ltr per sqm including preparation of roof surfaces complete all as specified and as directed. (b) One layer of APP based polymeric membrane minimum weighing 3kg/sqm and minimum 3mm thick reinforced with polyster non wove fabric (wt. not less than 150 gms/sqm) land on primed surface by forced application complete all as specified and directed by Engineer-in-Charge. Polymeric membrane shall be taken to a height of 60 cm (minimum) and then inserted inside the groove of parapet walls and shall be finished by a membrane flashing. Note: (i) Laying of APP based membranes shall be done by torch on method or as per manufacturer's instructions. (ii) A minimum overlap shall be 75mm length wise and 100 mm width wise of polymeric membranes respectively and sealed all overlaps and joints as manufacturer's instructions.

Material and labour for two coat of aluminium paint over APP membrane complete all as specified and directed by Engineer-in-Charge.

Supply only integral water proofing compound complete all as specified and directed by Engineer-in-Charge.

Material and labour brick work with sub class 'B' bricks, straight or curved on plan exceeding 6m mean radius built in CM (1:6) including demolition of brick work or stone/boulder masonary built in cement mortor including all quoins,arches,pillars etc,complete all as specified and directed

All as per item 105 above here-in-before but using old bricks retrieved from dismantling under here-in-before including cleaning and removal of mortar from old bricks etc including demolition of brick work or stone/boulder masonary built in cement mortor including all quoins,arches,pillars etc complete all as specified and directed

Demolition RCC Roofs, floors (other than ground floors), beams staircases, landing, chajjas, and similar suspended work complete all as specified and directed

Material and labour for RCC type B0 1:2:4 (12.5 mm graded Stone agg) as in Balcony, parapets, facia & Shelves etc complete all as specified and directed

Material and labour for applying bond coat of epoxy bonding agent & cement in 1:1 ratio for bonding old and new concrete on damaged surfaces applying polymer modified mortar in CM 1:3 including mixing of polymer latex additives upto 60mm thickness (Chajjas fins, border etc) (i) Qty of ploymer to be used 15% by weight of the cement. (ii) Use of electrical mixer to get the homogeneous dough on bond coat surfaces. (iii) To achieve required thickness repear this step after 24 hrs as required.(iv) Keep the surfaces moist using water forg for 5 to 7 days etc complete all as specified and as directed. (v) Rate shall be inclusive of all necessary scaffolding for building height up to 24 meters complete all as specified and directed by Engineer-in-CHarge.

Material and labour for use & waste wooden foRM work (rough finished surfaces ) to sides & soffits of Chajjas, parapets & facia and similar work n. exc 200 mm thick, complete all as specified and directed by Engineer-in-CHarge.

Material and labour for mild steel TMT Mild steel bars 10mm dia and over,cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with theincluding mild steel wire (annealed) not less than 0.9mmdia or securing with clips complete all as specified and directed by Engineer-in-CHarge.

Supply and fixing PVC waste pipe, 32mm bore suitable to waste coupling pipe attach with rubber ring joints fixed to waste coupling of sinks/WHBs complete all as specified and directed by Engineer-in-Charge.

Supply and fixing in repair grating doom 100 mm dia of PTMT (Minimum weight 25 gms) complete all as specified and directed

Supply and fixing in repair grating doom 125 mm dia with waste hole of PTMT. (Minimum weight 40 gms) complete all as specified and directed

Supply and fixing PVC (SWR) gully trap 125/110 mm, setting and jointing with solvent cement complete all as specified and directed

Suuply and fixing factory made PVC cup boards/ Shelf / Partition of required size consisting of panel of 18mm thick Celuka PVC Ply and for supporting the hold of Shelf/ Partition and shall provided 3 edges in size 18mm x18mm as per required length. The front side of the edge visible in the front of the shelf/ Partition to be edge lipped by 18mm width x 1mm thick PVC sheet using solvent cement etc. complete all as specified and directed by Engineer-in-Charge.

Material and labour for cement concrete (1:4:8) type D-1 using 20 mm graded stone aggregate as in sub base, 50mm thick, surfaces finished even and fair without using extra cement complete all as specified and directed by Engineer-in-Charge.

Material and labour for 25 mm thick cement concrete (1:2:4) type B-1 using (20 mm graded crushed stone aggregate) as in sub base of flooring,surface finished rough to receive floor topping complete all as specified and directed by Engineer-in-Charge.

Material and labour for machine pressed precast conctete interlocking paver block any shape,colour and size confirming to IS 15658-2006 of 60 mm thickness M-35 Grade, jointed and pointed with gray cement and no pigment over sand cushioning complete all as specified and directed by Engineer-in-Charge.

Material and labour for sand filling under floors for in cushioning to interlocking paver blocks complete all as specified and directed by Engineer-in-Charge.

Providing and laying at or near ground level factory made kerb stone of M-25 grade cement concrete in position to the required line, level and curvature, jointed with cement mortar 1:3 (1 cement: 3 coarse sand), including making joints with or without grooves (thickness of joints except at sharp curve shall not to more than 5 mm), including making drainage opening wherever required complete all as specified and directed by Engineer-in-Charge.

Material and labour for cleaning the blockage of bathroom/kitchen by cleaning the nanhi traps / gully traps of all the mud / sludge and getting out washing throughly traps, CI waste pipe by opening the cleaning eyes and depositing the sludge in a pit of suitable size at a distance not exceeding 100m from the gully trap and covering the same with the soil obtained from excavation of pit including excavation and earth work complete all as specified and directed by Engineer-in-Charge.

Taking down carefully existig copper / alumn point wiring for light / fan / bell / socket 5/15 Amp points complete with fitting and fixtures such as switches, sockets, c/ rosess, holders and bracket fittings with battens / conduits / wires,T/L fittings and making good the disturbed surfaces of walls and roofs etc.and to match with existing colour complete all as specified and directed by Engineer-in-Charge.

Taking down carefully unserviceable main switches and distribution boards with fuses/ MCB's (single phase or three phase) of any capacity complete all as specified and directed by Engineer-in-Charge.

Taking down carefully old unserviceable sub main wiring including meters and making good disturbed surfaces and matching with existing complete all as specified and directed by Engineer-in-Charge.

Supply and fixing point wiring complete with 1100 volts grade PVC FRLS insulated unsheathed cable of copper conductor, multi stranded of size 1.5 Sqmm, single core, drawn through & including PVC rigid concealed conduit, medium grade of suitable size (not less than 20mm dia) duly ISI marked with all accessories such as bends, reducers, spacers, saddles, junction boxes, bakelite sheets, sizes for mounting switch/sockets, fan regulators etc complete with and including continuous earth wire of size 1.5 Sqmm, single core, PVC FRLS copper conductor, insulated, unsheathed,stranded (Green colour) connected to common earth dolly complete all as specified for one light/fan/bell/Bldg security light point controlled by one single pole one way switch.

All as per Item No 126 above but one 3 pin 5 Amp socket outlet point controlled by one switch on Independent board.

All as per Item No 126 above but one 3 pin 5 Amp socket outlet point controlled by one switch on same board.

All as per item No 126 above but one 15 Amps socket outlet point controlled by one single pole switch one way and wiring with 2.5 Sqmm PVC insulated,stranded,unsheated copper conductor on independednt board with continuous earth wire of size 2.5 Sqmm green colours PVC insulated, unsheathed,stranded copper conductor cable.

All as per item No 126 above but one 15 Amps socket outlet point controlled by one single pole switch one way and wiring with 4.0 Sqmm PVC insulated,stranded,unsheated copper conductor on independednt board with continuous earth wire of size 4.0 Sqmm green colours PVC insulated, unsheathed,stranded copper conductor cable.

Supply and fixing 6 amps, single pole, one way switch urea back piece (IP20), 240V, 50Hz, white in colour, duly ISI marked complete all as specified and directed by Engineer-in-Charge.

Supply and fixing switch piano flush type 20 amps, single pole one way, white in colour, duly ISI marked complete all as specified and directed by Engineer-in-Charge.

Supply and fixing 6 Amps Socket 2 in 1, Urea backpiece (IP20), white in colour, duly ISI marked complete all as specified and directed by Engineer-in-Charge.

Supply and fixing socket outlet, UNI, 2 in one 10 Amps & 20 Amps, white in colour, duly ISI marked complete all as specified and directed by Engineer-in-Charge.

Supply and fixing bell push flush, type 6 amp single pole one way, white in colour, duly ISI marked complete all as specified and directed by Engineer-in-Charge.

Supply and fixing door bell, AC, 230 volts, single pole, white in colour, duly ISI marked complete all as specified and directed by Engineer-in-Charge.

Supply and fixing ceiling rose surface type, 240 volts, 50 Hz, 6A, Pilot 3 plate, white in colour, bakelite 65 x 50mm, 3 teRMinals duly ISI marked complete all as specified and directed by Engineer-in-Charge.

Supply and fixing batten holder (with metal ring), 240 volts, 50 Hz, 6A, white in colour, duly ISI marked complete all as specified and directed by Engineer-in-Charge.

Supply and fixing rotary stepped type electronic fan regulator for ceiling fan 1200/1400mm size, 240 volts, 6 Amps, 100W, deluxe, white in colour, duly ISI marked complete all as specified and directed by Engineer-in-Charge.

Supply and fixing LED light fitting 1 x 20 Watt, 220V, AC decorative box type with driver, holder including LED tube light connecting up with three core flexible copper conductor cable of suitable size from ceiling rose complete.

Supply and fixing LED bulb of 9/10 watts B-22 CDL 3 star 6500K, complete all as specified and directed by Engineer-in-Charge.

Supply and fixing factory made three phase and neutral Sheet Steel made out of CRCA 1.2 mm thick, powder coated double door vertical distribution board 4 way, dust and veRMin proof, fitted with two cover, one screwed cover for incoming and outgoing MCBs and the second for protection of MCBs fitted with colour bus bar of capacity 200 Amps, neutral link, earth bar and din rail suitable for use on 240/415V, 50Hz supply, VTPN DB, partly immersed in wall, including of MCCB 4 pole adjustable theRMal & fixed magnetic type 100 Amps, 50Hz, 415 Volts with rupturing capacity 16 KA and making good distrubbed surfaces with matching colour, complete all as specified and directed by Engineer-in-Charge.

Supply and fixing factory made single phase and neutral Sheet Steel made out of CRCA 1.2 mm thick, powder coated double door vertical distribution board 8 way, dust and veRMin proof, fitted with two cover, one screwed cover for incoming and outgoing MCBs and the second for protection of MCBs fitted with colour bus bar of capacity 200 Amps, neutral link, earth bar and din rail. suitable for use on 240V, 50Hz supply, partly immersed in wall and making good distrubbed surfaces with matching colour, complete all as specified and directed by Engineer-in-Charge.

Supply and fixing MCB SPN, 40A - 63Amps, 240 volts, "C" series, 10KA duly ISI marked, in MCB DB, complete with connection testing and commissioning complete all as specified and directed by Engineer-in-Charge.

Supply and fixing MCB SP, 6A-32 Amps, 240 volts, "B" series, 10KA duly ISI marked, in the MCB DB, complete with connection testing and commissioning complete all as specified and directed by Engineer-in-Charge.

Material and labour for Sub main wiring with two single core 2x6 sqmm FRLS insulated and unsheathed stranded copper conductor alongwith earth wire 6.0 sqmm drawn in FRLS rigid conduit connected to main board complete all as specified and directed (Two runs cable and one number earth wire and suitable FRLS conduit shall measured together as unit length) complete all as specified and directed by Engineer-in-Charge.

Supply and fixing exhaust fan heavy duty with louvers complete of sweep size 300mm, 900 RPM, single phase, with bolts, nuts and washers, size of the bolt 15 cm long 12mm dia embedded in the wall including provision of PVC flexible copper cable of size 23/00.0076 three core from ceiling rose to exhaust fan max 1.5 mtr for giving connection complete all as specified and directed by Engineer-in-Charge.

Cutting holes making good the distributed surface, grouting nuts for fixing of Exhaust fans complete all as specified and directed by Engineer-in-Charge.

Material and labour for disconnecting electric meter of any cap and refixing same after rewiring, in meter box including connection complete all as specified and directed by Engineer-in-Charge.

Supply and fixing sheet metal Meter Box single door minimum size 35x50x25cm for electric meter Factory made of MS sheets/CRCA sheet duly painted with powder paint and door hinged locking arrangement confoRMing to IS 5039 of 1983. The electric meter/switch box shall be suitable for fixing one number of electric meter and knock out holes for incoming and outgoing cable. Before the powder paint process the sheet steel shall go through the anti corrosion conditioning process in not less than seven tank process. Concealed in wall, including making good distrurbed surfaces with matching colour, complete all as specified and directed by Engineer-in-Charge.

Fixing or hanging only ceiling fans height upto 3mtr to 5 mtrs ceiling height of bldg including three core FR PVC Insulated & overall round sheathed flexible with PVC, colour of cores are Red, Black & Yellow/ Green is for earthing. Sheath colour is Black of cable size 23/0.0076 complete all as specified and directed by Engineer-in-Charge. Note : Ceiling fans obtained/ taking down from item Sr No 123 above.

Supply and fixing LED street light fitting 35 Watt 230 V AC outdoor type with high pressure die cast aluminum hosing and heat resistant complete with driver, lamp bracket with impact and corrosion resistant including theRMal management in multiple optics complete with IP 65/ 66 protection complete all as specified and directed by Engineer-in-Charge. .

Earthing complete with galvanized steel plate elecrode of size 60 cm x 60cm x 6.3 mm thick burried directly in ground vertically to a depth not less than 2.5 mtr below the ground level with top edge of earth plate at a depth not less than 1.5 mtr below ground level. Earth plate surrounded by 15mm thick packed alternative layers of charcoal dust and comman salt, earth lead GI wire of 4mm dia (8 SWG) by means of bolts , nuts, check nuts and washers of galvanised iron with thimbles. The other end of GI earth wire is connected to main switch board and protected by light grade GI pipe of 15 mm bore. provision of 20mm bore light grade GI pipe for watering including GI funnel and wire mesh. Pipe shallbe provided vertically upto top level of earth pit and then taken horrizontally to the earth pit. Cement concrete chamber of PCC ( 1:3:6 ) type C-2using 40 mm graded stone aggregate.The chamber shall be constructed one metre away from edge of earth pit. 50 mm thick pre cast cover of cement conrete (1:2:4) type B-1 using 20 mm graded stone aggregate and MS angle iron 50 x 50 x 6 mm frame including two coats of painting over a red oxide to sxposed steel surfaces. excavation in soft / loose soil, returning filling and removal of surplus soil to a distance of 50 mm as directed and shown in Electrical Plate No- 3 of SSR Part-1 (2009).

Supply and fixing as in repairs XLPE insulated, aRMoured,1100 volts grade, heavy duty cable of size 25 Sqmm nominal cross section, 4 core, flat or circular, PVC FRLS insulated aluminium conductor, served with inner sheathing of galvanized steel wire or tape and over-all PVC FRLS sheathed in service connections, laid in trenches, duct, through pipe, in floor, on pole including jointing and testing, complete all as specified and directed by Engineer-in-Charge.

Material and labour for excavation in trenches in soft/loose soil not exceeding 1.5 metre wide and not exceeding 1.5 metre deep and not exc 10 Sqm on plan, for laying of cable and getting out, complete all as specified and directed by Engineer-in-Charge.

Material and labour for dry and clean fine sand for cable cushioning to underground cable protection, complete all as specified and directed by Engineer-in-Charge. (Excavation and earth work measured separately). Note- Punned down thickness shall be measured.

Supply and fixing in repair Cover to underground cable with one layer of bricks using sub class ‘B’ bricks (old size) laid flat across the cable complete all as specified and directed by Engineer-in-Charge. (Excavation and earth work measured separately.)

Returning, filling in, earth including spreading, leveling watering and well ramming in layers each not exceeding 25cm thick each layer, complete all as specified and directed by Engineer-in-Charge.

Removal of surplus soil to a distance not exc. 50 metre and depositing where directed at a level not exc. 1.5 metre above the starting point complete all as specified and directed by Engineer-in-Charge.

Supply and fixing mild steel galvanised pipe, light grade, 50 mm nominal bore for passing of cable, fixed to poles/walls, laid under floor/road crossings, complete with and including clamps socket & elbow etc complete all as specified and directed by Engineer-in-Charge.

M/s Harkesh Kumar Bansal

M/s Sarup Singh