PROVN OF 01 x MD ACCN FOR BRIGADE CDR ATBENGDUBI MIL STN UNDER GE BANGDUBI

NOTE (Applicable for all Parts/ Items):- The bidders/contractors are advised to read tender document, all drawings & all corrigendum/ amendments and General conditions of contracts before entry/quoting the rates.

SCHEDULE "A" Part - I (BUILDING WORK ) Lum sum priced worked out by the the contractor for "BUILDING WORKS" as listed in shedule 'A' Part-I.

SCHEDULE 'A' PART-II (SITE CLEARANCE , DEVELOPMENT EARTH WORK AND EXCAVATION) Details of prepriced Schedule is given in tender documents.

SCHEDULE 'A' PART-IIl (ROAD/PATH/HARDSTANDING/CULVERT) Details of prepriced Schedule is given in tender documents.

SCHEDULE 'A' PART-lV (SEWAGE DISPOSAL) Details of prepriced Schedule is given in tender documents.

SCHEDULE 'A' PART-V (INTERNAL ELECTRIFICATION) Details of prepriced Schedule is given in tender documents.

SCHEDULE 'A' PART-Vl (INTERNAL WATER SUPPLY) Details of prepriced Schedule is given in tender documents.

SCHEDULE 'A' PART-Vll (MONKEY CAGING FOR PVC WATER TANK) Details of prepriced Schedule is given in tender documents.

SCHEDULE 'A' PART-Vlll (AREA DRAINAGE) Details of prepriced Schedule is given in tender documents.

SCHEDULE 'A' PART-IX (FENCING/ WALL/GATE) Details of prepriced Schedule is given in tender documents.

SCHEDULE 'A' PART-X (EXTERNAL WATER SUPPLY) Details of prepriced Schedule is given in tender documents.

SCHEDULE "A" PART -VII (MISCELLANEOUS ITEMS) Note:- This schedule is not pre-priced by MES and the pre-priced rate indicated as "Rs 0.00" under Col 5 signifies this fact only.

M&L for Bringing approved earth (as approved by Garrison Engineer) from sources outside defence land including all cost such as royalty if any, transportation, taxes etc. for area filling/ forming embankments including raising of original ground level(any height from OGL) or lowering by approved earth and including earth spreading in layers not exc 30cm thick each layer, watering, compaction with 8 tone to 12 tone power roller and finished to required size and shape etc, any high from EGL.

M&L including installation & testing for U type Modular Kitchen of Size 2500X3250 with following accessories.complete all as specified and directed. (i) Handle Type – 96 mm SS Handle (Upper Cabinets Only) (ii) Handel Less – SS cabinets and plywood Cabinet below cooking slab (iii) Laminate - outside colour inside white (iv) Carcass – waterproof plywood of grade 710 with decorative laminates outside colour and inside white (v) Kitchen Chimney (vi) Basket – Wire Basket10 nos SS304 grade (06 Nos plain basket , 01 nos cutlery , 01 nos plate,01 nos cupand saucer and 1 nos pull out) (vii) Channel – Telescopic Channel Hard ware Used – Godrej/KAFF/EBCO (viii) Hinges -0 to 10degree as required make - Hafle/ godrej or equivalent (ix) Upper cabinet - 02 Nos with plywood and laminate

S&F of 600 x 900 mm bevelled edge mirror of seleceted quality glass mounted on 6mm thick AC building board or ply board and fixed to wooden plug with CP brass screw and cup washer. complete all as specified and as directed.

S&F CP Towel Ring fixed with and including Chromium plated brass screws and plastic cleats (Minimum weight 150gms) complete all as specified

S&F corner glass shelf wall mounted of size 22.5 x 22.5cm , 8mm thick tempered transparent glass, heavy duty, having bearing capacity upto 10kg with chromium plated bracket guard and railing complete all as specified .

S&F CP towel rack 600mm Long With Lower Hangers with 3 hooks, Stainless Steel fixed with CP brass screws complete all as specified.

S&F CP toilet paper holder equivalent to Cat no -model ACN-CHR-1151N of Jaquar fixed with CP brass screws complete all as specified.

S&F central hole basin mixer swan neck cost copper alloy with capstan head chromium plated , screwed down high pressure with or without lettered hot or cold with long scewed shank and fly nuts screwed for iron pipe of 15 mm bore complete all as specified and as directed.

S&F in repair chromium plated two way angle stop cock 15mm dia complete all as specified and directed.

S&F chromium plated sink mixture with or without lettered hot or cold including joints to steel pipes or unions and plugging and screwing complete all as specified and as directed

M&L reflective thermoplast white/yellow road marking paint laid down through road marking machine in layers of 3.00mm thick crystlese and use of 5kg per sqm by incorporating the white glass beads @ 300gms per sqm for reflecting including cleaning of surfaces complete all as specified and as directed

Supply & fixing 2 Module socket with sutter 25 Amps 240 Volts including Moduler Metal flush box and cover Plate complete all as specified and directed.

Supply & fixing 2 Module starter switch 25 Amps 240 Volts including Moduler Metal flush box and cover Plate complete all as specified and directed.

S & F for Plug Top 15A suitable for operation on 230 volt 50 HZ AC supply complete all as specified and as directed

S & F for Highly efficient LED Bulbs, 10 W, used as a ready replacement for existing GLS/CFL direct fit lamp,in B-22 cap of make Bajaj, Havells, HPL complete all as specified and directed

SS & F for Decorative wall mounted LED luminaire made out of metal with nickel finish globe glass suitable for LED E27 LED lamp 10 watt and provosion of E27 LED bulb 10 watts complete all as specified and as directed.

Supply and fixing wall mounted bed spot lamp 10 watt LED luminaire made out of metal with chrome finish with 3 watt inbuilt LED light complete all as specified and as directed.

Supply and fixing LED tube light battern box type of CRCA sheet with decorative end caps suitable with ultra bridght gklass LED tube light 1 x18/20 watt T8 type single side connecction complete with both end bi-pin holder and all accessories internally prewired and fixed to wall/ceiling incl fittings accessories and connecting up with twin core flexible copper conductor cable suitable size all as specified.

Supply and fixing LED tube light battern box type of CRCA sheet with decorative end caps suitable with ultra bridght gklass LED tube light 1 x18/20 watt T8 type single side connecction complete with both end bi-pin holder and all accessories internally prewired and fixed to wall/ceiling incl fittings accessories and connecting up with twin core flexible copper conductor cable suitable size all as specified.

S & F for Energy saving new generation 10 watts LED bulk head fitting IP 65 luminaire with opel diffuser pre wired with warranty option of 5 years from date of installation and necessary mounting arrangements , provision of new 3 core multistranded copper conductor of size 23/0.193 from ceiling rose to fitting including LED bulb complete all as specified and as directed.

S & F for Energy saving new generation environmental friendly long life versatile presure die cast aluminium IP 66 for security light fitting luminaire with high power LEDs as light source and electronic driver, LDR sersor fdor autimatic switch ON/ OFF of capacity 25 watts with pre wired and necessary mounting arrangements and provision of 2.5 sq mm three core copper conductor cable multi stranded from ceiling rose to light fitting including necessary dia GI pipe medium grade bracket 1.0 mtr long bend to required shape with clamps, nut, bolts complete all as directed by Engineer- in-charge.

S & F for energy efficient exhaust fan of 230 mm sweep made of metal body Ventil Air -DS type complete with louver with bolts nuts and washers size of the bolt 15 cm long 12 mm dia embedded in the wall including provision of PVC flexible copper cable of size 23/0.0076 two core from ceiling rose to exhaust fan for connection and making suitable size of hole to existing brick wall for fan base compelte all as specified and directed. (Note : Cost of suitable opening wall for fixing exhaust fan is deemed to be included in overall rate quoted).

M&L for construction of brick masonry valve pit of size 600x600x600mm (internal dimension) one brick thick wall in CM 1:4 on 100mm thick PCC 1:4:8 type D-2 (40mm graded aggregate) as in foundation, and 15mm thick rendering in cement mortor (1:4) internally, externally up to 15cm below GL, providing valve pit cover made of 3 mm thick MS sheet/plate, welded with 40 X 40 X 5mm angle iron frame fixed on top of valve pit by means of hold fast 150mm long, embeded in PCC 1:2:4 type B-1 (20mm graded aggregate) block of size 230 x 200 x 100mm and provision of hinges, handle and locking arrangement including two coats of anti-corrosive paint over a coat of red oxide zinc chrome primer and necessary excavation and earth work in soft/loose soil including dismantling of existing valve pit complete all as specified & directed.

Supply and fixing LED light fitting for street/security lighting energy saving & environmental friendly long life versatile pressure die-cast aluminium housing with toughened glass and individual high lumen LED with secondary optics of capacity 60 Watt with minimum 120 Lm/watt, 240 volts AC 50 Hz , IP 66 protection suitable for 40 mm dia GI pipe bracket including five years on site warranty from manufacturer complete all as specified and directed.

Supply and fixing LED Post top light fittting luminaires 40/45 Watts IP 65 type made in die-cast aluminium housing with decorative opal/clear polycarbonate diffuser complete with control gear box suitable for 50 mm dia post and all accessories duly prewired and connecting to junction box and testing including five years on site warranty from manufacturer complete all as specified and directed.

Supply and fixing pole mounted SMC junction box/bus bar chamber for loop IN/OUT connection of street light cable of size 295x195x100 mm high heat distoration temperature, non-fusing , shockproff, rustproof, 100 % weatherproof, fire retardant- class FV-O as per IS 11731 Part-II and suitable locking arragement with single phase and neutral aluminium busbar of size 20X3 mm of length 170 mm wrapped with PVC sleeves with maintained the colour code, MCB DIn rail channel for mouting of one no MCB SP and provision of making holes with GI nuts, bolts & washers for cable connections mounted on hydrograpic insulators with nuts & bolts at both ends of busbar and fixed on pole steel/PCC with suitable two nos flat iron clamp 25x4 mm with nuts and bolts (duly painted with two coats of aluminium paint over a coat of red oxide primer) complete all as specified and as directed.complete all as specified and directed

M & L for street light bracket made out of GI pipe light grade 40mm dia 1.2 metre length bent to shape and reduced to required size at top upto 1.5 metre length by cutting, welding and well finishing including MS clamp of flat iron of size 40x6 suitable length 2 sets complete with drilling, hole, fixing with nuts bolts and washers including painted with two coats of aluminium paints over a coat of red oxide primer complete all as specified and as directed.

Supply and fixing in reapir PVC Sheathed multi stranded unarmed copper conductor cable LT 1100 volt grade Conforming to IS 7098 FRLS (inner sheet) of size 1.5 Sqmm 3 Core (Nominal Area) from pole junction box to light fitting with suitable size copper cable lugs and connector all complete as specified and directed.

File No: 8326/B/E8