REPAIRS TO CERTAIN TOILETS, REPAIR/ REPLACEMENT OF SANITARY FITTINGS SWG /PVC DRAIN PIPES SUNKEN FLOOR, INSIDE DRDL/ ASL BUILDINGS UNDER AGE B/R-I, HYDERABAD

Amount

Dismantling floor, hearth or wall tiling including cement mortar bedding /backing coat and removing rubbish off the premises, complete all as directed.

Demolition of Brickwork or stone/boulder masonry, build in Cement mortar including all quoins, arches, pillars etc, but excluding ashlars facings, dressed stonework and precast concrete articles

M&L PCC 1:4:8 type D2 using 40mm graded stone agg as in sunken floor/ foundation/ mass filling, including demolition / digging of old concrete complete all as specified and directed by Engineer-in-Charge.

M&L PCC 1:2:4 type B-1 (using 12.5 mm grade stone agg) concrete 30 mm thick as sunken floor even and fair to receive top layer including demolition / digging of old concrete complete all as specified and directed

M&L rendering 15mm thick as in sunken portion on brickwork or concrete surfaces in cement mortar 1:3 and finished fair and even including mixing of WPC in mortar complete all as directed by Engr-in-charge. Note: - Supply only WPC shall be measured and paid separately.

M&L water proofing treatment with polymeric standard membrance of weight not less than 3Kg/Sqm with 90 micro high molecular high density polyethylene film sand witched between two layers of poly meric (atactic poly propylene based) bitumen laminated on both sides with 20 micron HMHDPE film over a coat of hot blow bitumen of 85/25 grade applied at the rate of 1.2 Kg per Sqm after priming the surfaces with bituminous emulsion at the rate of 100gms per Sqm duly 10cm over lapped and shall be fused uniformly by LPG torch flame on horizontal/ vertical surface of sunken floors complete all as directed by Engr-in-charge.

S&F in repairs 40mm bore GI medium grade pipe as in spouts 45cm long including making in holes in RCC and making good in cement mortar 1:1/PCC 1:2:4 complete all as directed by Engr-in-charge.

M&L Non skid coloured ceramic tiles 7 mm thick area of each tiles exc 0.06 sqm but n.exc 0.11 sqm as in floor finishes set and jointed in neat cement slurry and pointed in white or coloured cement to match to complete all as specified and as directed.

M&L Non skid coloured ceramic tiles 7 mm thick area of each tiles exc 0.11 sqm but n.exc 0.18 sqm as in floor finishes set and jointed in neat cement slurry and pointed in white or coloured cement to matchto complete all as specified and as directed.

M & L for coloured glazed ceramic tiles of size 350x250x7mm /450 x 300 x 7 mm thick on vertical surfaces such as skirting/dado, jointed in neat cement slurry and pointed in white or coloured cement to match with the colour of tiles, complete all as specified and as directed.

M&L Rendering 15mm thick cement plaster in CM 1:4 on fair faces of brick work or concrete surfaces to back of tiles complete all as directed.

M&L screed bed or bedding layer of mortar 15mm thick in CM 1:4 for laying floor finishes complete all as directed.

M&L for 18 to 20 mm thick granite (of any type) machine cut in floor/platform/tread, bedded and jointed with grey cement slurry and pointed with white cement with admixture of pigment to match shade of granite stone including griding and polishing types over screedbed complete all as specified and as directed.

M&L for 18 to 20 mm thick granite (of any type) machine cut in skirting/ dado/ riser, bedded and jointed with grey cement slurry and pointed with white cement with admixture of pigment to match shade of granite stone including griding and polishing types over screedbed complete all as specified and as directed.

M&L Rounding to edges of granite stone slabs one edge, such as in steps, cooking platform and other similar situation complete all as specified and directed

S&F in repairs vitreous china white wash down water closet pan, pedestal pattern including fixing bolts, 'P' or 'S' trap, plastic water closet seat and cover with recessed bottom with MS CP hinging device (excluding flushing cistern and flush pipe) complete all as all as directed by Engineer-in-Charge.

S&F in repairs vitreous china Orrissa pattern 'squatting pan', white of size 580x440mm with integral foot rest (excluding flushing cistern and flush pipes) but with its cement concrete bedding and ‘P’ or ‘S’ trap, including PVC pipe upto finished floor level to connect flush pipe, making good all the disturbed surfaces to match the adjoining complete all as directed by Engineer-in-Charge.

S&F in repairs vitreous china Urinal half stall type,white (excluding flushing cistern and waste pipe), complete.

S & F in repairs WHB vitreous china, 'Flat back or angle back type', white including cutting for & pinning in ends of brackets or existing stand including PVC waste pipe and fitting 32mm complete all as directed by Engineer-in-Charge.

S&F in repairs WHB vitrteous china glazed,size 550x440mm, Ovel type coloured including cutting for & pinning in ends of brackets or exisiting stand including CP waste pipe and fitting 32mm complete all as specified and directed by Engr-in charge

S&F in repairs 12 mm thick toughen glass as in urinal partition fixing with suitable clamp minimum 02 Nos complete all as directed

S & F in repairs PVC valve less, symphonic action type, flushing cistern 10 ltr capacity, low level, white, with inlet ball valve float and handle along with suitable flush pipe/bend including brackets, complete all as directed by Engineer-in-Charge.

S & F in repairs towel rail 600mm long of CP fixed with and including CP brass screws and wooden/plastic cleats complete all as directed by Engineer-in-Charge.

S & F in repairs PVC connection pipe 15mm dia, 600mm long with PTMT check nuts and washer on both ends complete all as directed by Engineer-in-Charge.

S & F in repairs grating doom 100mm dia of CP complete all as directed by Engineer-in-Charge.

S&F in repairs 32mm waste coupling of cast copper alloy chromium plated (half or full threaded), complete all as specified and directed by Engineer-in-Charge.

S&F in repairs 40 mm waste coupling of cast copper alloy chromium plated (half or full threaded), complete all as specified and directed by Engineer-in-Charge.

S & F in repairs 15 mm, Pillar taps, cast copper alloy, with capstan heads, chromium plated, screwed down, high pressure with or without lettered ‘Hot’ or ‘Cold' with long screwed shanks and fly nuts, screwed for iron pipe complete all as directed by Engineer –in-Charge.

S&F in repairs 15m dia pillar taps SWAN NECK type copper alloy with capstan head chromium plated screwed down high pressure with or without lettered hot or cold with long screwed shanks and fly nuts screwed for iron pipe complete all as directed by Engr- in - charge.

S & F in repairs bib cock, cast copper alloy, chromium plated for size 15mm dia with crutch or butter handle, screwed down for iron pipe complete all as directed by Engineer-in-Charge.

S & F in repairs stop cock 15mm dia cast copper alloy, screwed down high pressure, with crutch or butter fly handle, srewed both ends for iron pipe or for unions, complete all as directed by Engineer-in-Charge.

S&F in repairs Urinal spreader high pressure of cast copper alloy chromium Plated screwed for iron pipe

S&F in repairs Push tap high pressure of cast copper alloy chromium Plated screwed for iron pipe

S&F in repairs Gun Metal, globe or gate valves 25 mm bore, with iron whel head screwed both ends for irop pipe

S&F in repairs 15 mm angle valve of cast copper alloy chromium plated, high pressure screwed for iron pipe

S & F in repairs two way bib cock, cast copper alloy, chromium plated for size 15mm dia with crutch or butter handle, screwed down for iron pipe complete all as directed by Engineer-in-Charge.

S&F in repairs health faucet cast copper alloy ,chroimum plated including 1 mtr long pipe, and all fittings to fix screwed down for iron pipe complete all as specified and directed

Repairs to leakage from inlet /out let of over head water storage tanks by using M-seal or tightening of checknut or replacing chuknut etc complete all as speciifed by engr- in charge.

Taking down and Cleaning and re-fixing old 15mm dia GI water Tubing with and including new ISI marked pipe fittings, in new or old position on walls, ceiling, floors etc., complete all as directed by Engineer-in-Charge.

Taking down and Cleaning and re-fixing old 20mm dia GI water Tubing with and including new ISI marked pipe fittings, in new or old position on walls, ceiling, floors etc., complete all as directed by Engineer-in-Charge.

S&F in repairs Steel water tubing, medium grade, galvanized of 15mm dia with all fittings including short lengths, fixed to walls, concealed in wall and ceiling or laid in floor complete all as directed by Engineer-in-Charge.

S&F in repairs Steel water tubing, medium grade, galvanized of 20mm dia with all fittings including short lengths, fixed to walls, concealed in wall and ceiling or laid in floor complete all as directed by Engineer-in-Charge.

S & F Rotational moulded polyethylene water storage tank (cylindrical vertical with closed top) double layered 500 ltr capacity, hoisted and fixed in position all as specified in SSR Part I including taking down old unserviceable water tank complete all as specified and as directed by Engineer-in-Charge.

S & F Rotational moulded polyethylene water storage tank (cylindrical vertical with closed top) double layered 1000 ltr capacity, hoisted and fixed in position all as specified in SSR Part I including taking down old unserviceable water tank complete all as specified and as directed by Engineer-in-Charge.

S & F Rotational moulded polyethylene water storage tank (cylindrical vertical with closed top) double layered 2000 ltr capacity, hoisted and fixed in position all as specified in SSR Part I including taking down old unserviceable water tank complete all as specified and as directed by Engineer-in-Charge.

S & F in repair ball valves, PTMT epoxy coated aluminium rod & high density plastic ball screwed for iron pipe and fixed of 25 mm bore complete all as directed by Engineer-in-Charge.

Dicconnecting existing OH water tanks of any nature and type and of capacity exc 500 and n.exc 1000 litre, setting aside (or lowering if required) and hoisting if required, re-connecting and re-fixing in position including giving temporary connection till repairs are completed, complete all as specified and directed by Engineer-in-Charge.

All as per item No. 48 above but exc 1000 ltr not exc 2000 Ltrs

Taking down chowkats or frames with shutters (without taking off shutters from frames) area n exc.1.50 sqm each, complete all as directed by Engineer-in-Charge.

Taking down chowkats or frames with shutters (without taking off shutters from frames) area exc.1.50 sqm but not exc.4 sqm each,complete all as directed by Engineer-in-Charge.

Taking down shuters of any description exc 1 sqm and n exc 2 Sqm each complete all as directed.

S&F Second class hard wood Plain, solid, straight, chowkats and frames, wrought, framed rebated on the solid, rounded or chamfered, put together with glue pinned at joints, supplied and fixed

S&F 35mm thick second class hard wood factory made Plain framed, panelled shutter (two panel) with lock rail and panel of 9 mm B.W.P commercial ply or 12 mm veneered particle board with commercial veneering on both faces. The size of rail and stile as per IS: 1003 (Part I), kiln seasoned and chemically pressure treated

S & F Factory made solid PVC door frame of size 50 mm x 47 mm made out of 5 mm plain colour PVC sheet reinforced with MS square tube.

S&F Factory made solid panel PVC door shutter 30 mm thick (style) consisting of frame made out of M.S. tubes for top & bottom rails. M.S. frame shall be covered with heat moulded plain colour PVC ‘C’ channel having a PVC sheet strip of 20 mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail; Paneling of plain colour PVC sheet to be fitted in the M. S. frame welded/sealed to the stiles & rails with suitable PVC sheet beading and joined together with solvent cement, supplying & fixing in the frame at site complete all as directed by Engineer-in-Charge.

S&F 100mm Mild steel butt hinges medium weight, cold rolled complete all as specified and directed by engr-in-charge.

S & F aluminium anodized, barrel tower bolt of extruded section, 150 mm long complete all as directed by Engineer-in-Charge.

S & F 150 mm size aluminum handles, cast type, anodised complete all as directed by Engineer-in-Charge.

S & F Aluminium alloy, anodised sliding door bolt 300mm long, with hasp, staple (Bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast aluminium alloy and fixed, complete all as directed.

S & F steel windows/ ventilators fixed type with glazing bars including taking down old windows / ventilators complete all as directed.

S & F steel windows with side hung shutters including projecting type hinges with steel handles and steel peg stay complete with glazing bars, dovetailed or welded, including taking down window shutters complete all as directed.

S&F Figured glass 3mm thick, pin head type and glazing with oil putty in squares in exc 0.5 sq.m in each pane

S&F in repairs Figured glass3.00mm thick, pin head type and glazing with oil putty in squares in exc 0.5 sq.m in each pane

S&F in repairs for plain sheet glass, ordinary quality, 3.0mm thick and glazing with oil putty in square n exc. 0.5 sqm each pane

Preparation of new steel surfaces of any description over 10cm width or girth and applying two coats of synthetic enamel paint over a coat of red oxide zinc chrome primer, complete all as directed.

Preparation of wood and wood based new surfaces of any description not otherwise described over 10cm width or girth and applying two coats of synthetic enamel paint over a coat of pink primer, complete all as specified and as directed.

S & F in repairs PVC (SWR) pipes 110mm bore, single socketed in any length with rubber ring joints fixed to wall or laid in floors complete all as directed by Engineer -in-Charge.

S & F in repairs PVC (SWR) pipes 75mm bore, single socketed in any length with rubber ring joints fixed to wall or laid in floors complete all as directed by Engineer -in-Charge.

S & F in repairs PVC (SWR) bends (any radius) suitable for 110 mm bore pipe complete all as directed by Engineer -in-Charge.

S & F in repairs PVC (SWR) bends (any radius) suitable for 75 mm bore pipe complete all as directed by Engineer -in-Charge.

S&F in repairs for 75mm dia outlet PVC (SWR) floor trap plain with grating including jointing with solvent cement complete all as directed by Engr-in-Charge.

M&L Brick work with sub- class 'B' class bricks straight or curved on plan exc 6m mean radious in CM (1:6), complete all as specified and directed by Engineer-in-Charge.

M&L Brick work with sub class 'B' bricks, straight or curved on plan to any radius in half brick thick walls built in cement mortar 1:4, complete all as specified and directed by Engineer-in-Charge.

M&L 10mm thick rendering in cement motar (1:6) on brick or concrete faces finished even & smooth without using extra cement, complete all as specified and directed by Engineer-in-Charge.

M&L for Rendering 5 mm thick in CM (1:3) on fair faces of concrete surfaces ceiling etc, finished even and smooth without using extra cement including taking down cement plaster, any description on brick or stone or cement concrete walls including raking out joints, hacking for key, scrubbing down with watercomplete all as directed by Engineer-in-Charge.

M&L for Preparation of newly plastered surfaces of walls and applying three coats of white wash, complete all as directed.

M&L for Preparation of newly plastered surfaces of ceilling and applying three coats of white wash, complete all as directed.

Supply only integral water proofing compound.

WELDECOR

SM CONSTRUCTIONS

SRI SAI ENTERPRISES

sanjar enterprises

SUN LIGHT HOUSE

Venkat Sai Enterprises

M/s K Venkateswara Rao

Maruthi international