TENDER NO.(11) WARD NO.13 ME JHANSI KANPURA HIGHWAY SE ANDAR MUSTARA KO JANE WALE MARG PAR STHEET EAST VALLEY ME STHEET MARG PAR SIDE PATTI AWAM DAMARIKARAN KA KARYA.

Providing & laying tack coat with 80/100 maxphalt including mat., lab. & T&P etc. all complete with 0.35 kg/sq.m(A.Rate).

Providing and laying Bituminous Concrete grade-II (B.C.) with 60-90 TPH batch type H.M.P. Producing an average output of 75 tonne per hour using crushed aggregate of specified grading, premixed with bituminous binder CRMB-55 @ 5.4% of mix and filler, transporting the hot mix to work site applying with a hydrostatic paver finisher with sensor control to the required grade, level and alignment rolling with smooth wheeled, vibratory and tandem rollers to achieve the desired compaction as per M.O.R.T.&H. specification clause 509 complete in all respects.

Earth work in cutting & Filling or in ordinary soil mixed including 1.5m lift & 3km lead including lab., and T&P etc all complete as decressing. SOR 253. (a). Cargate SOR 231.

Supply & laying of GSB-I with approve size of stone ballast including etc all complete.

Providing & laying of C.C. with 20-40mm gauge stone ballast ,coarse sand ,cement in the proportion of 8:4:1 including supply of all materials,labour and T&P etc required for proper completion of the work all complete (S.I. No. 281).

1st class Brick Work in 1:4 Cement & Sand mortar in foundation and plinth including supply of all mat. Lab. And T&P etc. all complete (S.I. No. 305).

12mm thick plaster in 1:4 Cement & Sand mortar including lab.& T&P etc all complete ( S.I. No. 584).

Providing & laying of C.C. with 20mm gauge stone ballast ,coarse sand ,cement in the proportion of 1:2:4 including supply of all materials, labour and T&P etc required for proper completion of the work all complete (S.I. No. 279(a))

Supply & fixing of 80mm thick precast interlocking concrete block paverment laid in stone dust base and fill joint with fine sand. Joint filled after labling and dressing base including supply of all materials, labour T&P etc required for proper completion of the work (NEW ITEM NO-3)

P/L of Center line & Edge line road marking with hot applied thermoplastic compound 2.5 mm thick including reflectonsing glass beads @ 250 gms per sqm area, thickness of 2.5 mm is exclusive of surface applied glass beads as per IRC:35 the finished surface to be level, uniform and free from streaks and holes (S.I. no.1)

Supply and fixing of pavement maker (Cat Eye) Type X-ASTMD-4956-04 Avery Dennison /3-M (USA Maker) consisting of ASA plastic housing fitted with lightly adherent plotting compound. The housing shall contain prismatic two glass covered prismatic reflective face to reflect incident light i/c all tax. (S.I.no.11)