GE (W)/HSR-35/2023-24 REPAIR TO KICHEN AND ROOM CUPBOARDS OF OFFR MD ACCN AT ZONE A AT HISAR MIL STATION UNDER GE (W) HISAR

Amount

Taking down chowkat or frame with shutters area n.exe 1.5 sqm each (Without taking off the shutters from the frame) incl cutting holes For hold fast & making good complete all as specified

Taking down chowkat or frame with shutters area exe 1.5 sqm but not exe 4 sqm each (without taking off the shutters from the frame) incl cutting holes for hold fast and making good complete all as specified.

Taking down shutters of any description exe 1 sqm and n.exe 2 sqm each and removal from site etc complete all as specified and directed.

Easing of wooden doors/window/ventilator shutter any thickness, any size by planning with plane jack, by tightening of hinge screw, by adjusting/tightening tower bolts, sliding bolts etc and making it fully functional complete all as specified and directed.

S&F pressed steel Pre-painted frames of size 125x60mm for doors with one or more rebates incl necessary fixing lugs , hinges, lock strike plate etc complete all as specified and directed..

S&F pressed steel Pre-painted frames of size 105x60mm for doors with one or more rebates incl necessary fixing lugs , hinges, lock strike plate etc complete all as specified and directed..

M&L for PCC 1:3:6 type C-1 (using 20mm Graded Stone Aggregate) as in filling of Chowkhats and complete all as spd and directed .

M&L Prelaminated PVC solid Board ,18/19 mm thick ,Prelaminated on one side with decorative choice lamination & other side balancing white lamination , including pasting with solvent chemical as required at site or fixed with screws complete as in Kitchen Cupboard, room cupboard ,shelves / partition incl fixing arrangement on walls all as spd and directed by Engr-In-Charge including taking down of cupboard complete all as specified and directed.

M&L Prelaminated block board, 18/19 mm thick exterior grade, both side side balancing white lamination, fixed with screws to timber frame work including taking down of cupboard all as specified.

S&F for 1mm thick factory made pressed steel shutter fixed with 1.25mm thick pressed steel frame of 105 x 60mm and as reqd for cupboards (consisting two shutters) including 06 Nos hinges of size 100mm long and Godrej pattern three way locking system with suitable shape & size 12mm dia MS rod & 01 Nos chromium plated handle of size 150mm long with & including two coats of shop spray synthetic enamel painting over a coat of red oxide primer as colour approved by GE. Note : Cupboards frame to be fixed with 06 Nos nuts & bolts of dia 12mm & 150mm long at vertical outer edge of cupboards brick wall / concrete surface including making good the distrubed surfaces complete all as specified and directed. Note :front face shall only be measured for payment purpose.

Dismantling wrought iron or mild steel work of any description not otherwise provided for.

S&F,MS framed work such as grill grating, framed Guard bars, barred iron doors,ladders, frame work for securing water tank,cooler stand and similar work conformed to Fe-410 or 310-0 complete all as specified and directed.

S&F 30 mm thick factory made solid PVC Moulded Door Shutter with Wood Free EPS, with 2,4 or 6 raised panel design with 2mm thick moulded Prelam PVC sheet on front & back face and all as spd in SSR and directed by Engre-In-Charge

S&F solid PVC door frame of size 50mmx47mm made out of 5mm thick Prelam PVC sheet reinforced with MS square tube fixed in opening as per specifications and making good the plaster of wall in CM 1:6

S&F flush shutter 30 mm thick, solid core construction, with block board core and plywood face panels, commercial type on both sides complete all as specified and directed..

S&F 35mm thick factory made plain framed, paneled shutter made of 2nd class HW (Bonsum/Hollock) of 35 mm thick(two panels)with lock rail and panel of 12 mm veneered particle board with commercial veneering on both faces. The size of rail and styles as per IS: 1003 (Part-I), kiln seasoned and chemically pressure treated complete as directed

S&F 35 mm thick 2nd class hardwood glazed and skeleton shutters, open rebated and prepare to receive glass, gauge etc (with sash bars) edges but divided into squares, with plain, chamfered or rounded, mitred and rebated sash bars, any numbers as specified in SSR Part-I Section 8 Clause 8.24(a), fitted to chowkats complete all as directed.

M&L for preparation of new surfaces of wood or wood based mtrls of any desc over 10cm width or girth and applying two coats of synthetic enamel paint of approved tint over a coat of pink primer complete all as specified.

S&F steel window box type with side hung shutters Factory made including box type hinges with steel handle and steel peg stay complete with glazing bars devetailed or welded.The rates include for painting with one shop coat of zinc chromate primer. Note:- Details of box type window shall be given on HQ CEJZ drawing No TD/2013/01 sheet 1/3, 2/3, 3/3.

S&F steel window box type with side hung shutters Factory made including box type hinges with steel handle and steel peg stay complete w/o glazing bars devetailed or welded. The rates include for painting with one shop coat of zinc chromate primer. Note:- Details of box type window shall be given on HQ CEJZ drawing No TD/2013/01 sheet 1/3, 2/3, 3/3.

S&F steel ventilator with top hung shutter of glazed & gauged including hinges, steel peg stay complete with glazing bars including one shop coat of redoxide primer complete all as specified and directed.

S&F for Stainless steel wire cloth 0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed with stainless steel wire staples .

S&F in Repairs for Stainless steel wire cloth 0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed with stainless steel wire staples as in windows/doors all as specified and directed.

S&F 100mm aluminium anodised hasp and staple safety type.

S&F 100 mm extruded aluminium alloy handles fabricated type.

S&F 150 mm extruded aluminium alloy handles fabricated type.

S&F aluminium anodised barrel tower bolt of extrued section 150 mm long all as specified.

S&F aluminium anodised barrel tower bolt of extrued section 200mm long all as specified.

S&F 200 mm long aluminium alloy anodized sliding doot bolt with hasp staple (bolt type) and fixing clips of sheet cast or extruded section and fixining biolts abd sliding bolts of extruded section or cast aluminium alloy complete all as specified.

S&F in repairs butt hinges 100mm medium weight and fixed with steel frames by means of welding and riveting complete all as specified and directed.

S&F 200mm long Mild steel ordinary rat tail rod pattern springs including roller and roller plate complete all as specified and directed.

S&F in repairs 200mm long Mild steel ordinary rat tail rod pattern springs including roller and roller plate complete all as specified and directed.

M&L for two coats of synthetic enamel paint on steel surfaces of any description over 10cm in width or girth not otherwise described incl prepartion of new surfaces complete all as specified and directed.

S&F Glass pane ordinary quality 3mm thick not exc 0.50 sqm each pane with fixing clips ,putty or wooden beads to wooden/steel frames with and including MS glazing clips not less than 6 Nos per pane and making good the surface matching existing surface complete incl hacking out old broken glasses all as complete all as specified and directed.

S&F in repair Glass pane frosted quality 3mm thick not exc 0.50 sqm each pane with fixing clips ,putty or wooden beads to wooden/steel frames with and including MS glazing clips not less than 6 Nos per pane and making good the surface matching existing surface complete incl hacking out old broken glasses all as complete.

S & F continous piano hinges mild steel bright finish or galvanised of 40mm width of flaps for cupboard shutters complete all as specified.

S & F SS Cabinet Knob for cupboard shutters and kitchen cabinet and complete all as specified.

Demoliton of Brickwork or stone/boulder masonry, built in cement mortar including all quoins, arches, pillars, etc, but excluding ashlar facings, dressed stonework and precast concrete articles and removing debries out of MD land as directed.

M&L Brick work with flyash bricks, straight or curved on plan exc 6m mean radius, built in CM 1:4 complete all as specified and directed.

M&L for rendering 10mm thick in cement mortar 1: 6 on faces of brick work or concrete surfaces in patches, finished fair and even all as complete including taking down of cement or cement lime plaster.

M&L for preparation of new plastered surfaces of wall and applying two coat of oil bound distemper over and including one coat of 1 mm thick wall care putty complete

M&L Non skid ceramic coloured tiles 7 to 8 mm thick area of each tile exceeding 0.11 sqm but not exceeding 0.18 sqm , in floors etc. set and jointed in neat cement slurry and pointed in coloured cement to match tiles over and including 10 mm thick screed bed in CM 1:4 complete all as specified complete including dismantling of floor tiles.

M&L for coloured glazed ceramic tiles of size 350x250 x7/450x300x7 mm thick as in vertical surface set and jointed in neat cement slurry and pointed flush in white cement with pigment over and including 10mm thick baking coat in CM 1:3 complete all as specified. complete all as specified.

M & L for Vitrified ceramic tiles 10mm thick (square /rectangular ) polished , area of each tiles not.exceeding 0.36 Sqm in floors etc set and jointed in neat cement slurry and pointed flush in white or colour cement with pigment over and including 10 mm thick screed bed in CM 1:4 complete all as specified.

M & L for Vitrified ceramic tiles 10mm thick (square /rectangular ) polished , area of each tiles not.exceeding 0.36 Sqm as in vertical surfaces etc set and jointed in neat cement slurry and pointed flush in white or colour cement with pigment over and including 10mm thick screed bed in CM 1:3 complete all as specified.

S&F superior quality ,heavy type SS rail (grade -304) (Cu rtain rod/drapery rod), 20mm dia with and including fency type SS bracket 2 Nos for each opening and SS side Knob (fency type) of required shape and size 2 Nos of each opening complete all as specified and directed.

M&L for preparation of old painted steel or iron surfaces of any description, over 10 cm width or girth and applying two coats of synthetic enamel paint complete all as specified and directed.

M&L for preparation of old painted wooden or wood based surfaces of any description, over 10 cm width or girth and applying two coats of synthetic enamel paint complete all as specified and directed.

Dismantling Wall and ceiling boards (fibre, pulp, insulation, etc.) or insulation boards/slabs/ blankets, any thickness, including cover fillets and frame work complete all as spd andf directed.

S&F hollow PVC wall paneling, super strong quality single side prelaminated with flat or fancy patterned on laminated side, incl PVC 'L' and 'U' sections for finishing of corners and ends etc inclusive of fixing with screw or with solvent cement requrired at site on walls complete as specified and directed.

S&F Anodised aluminium snap grid framework of size 605 mm x 605 mm for false ceiling all as specified and directed by Engr-In-charge

M&L Exposed metal frame ceilings with 8 mm thick calcium silicate board of silicious and calcerious material reinforced with cellulose fibre for fixing in 600 x 600 mm grid (frame work for ceiling shall be measured and paid separatey )

M&L Powder coated Aluminium door Shutters , Aluminium Section weighing 0.55 Kg/Rm incl necessary joining cleats , glazing clps , rubber neoprene , packing , handle 2 Nos in each doors , hinges , anodised aluminium snaps bidding , screws etc complete all as spd and directed

S&F sheet glass 5.5 mm thick ordinary quality in squares exc 0.5 sq m incl 25 micron black film and all as specified.

M&L Powder coated aluminium window and ventilator shutters , side hung type (thickness or powder coating n less than 50 micron) without sash bars ,aluminium sections 0.55 Kg /m incl necessary joining cleats ,glazing clips ,rubber packing ,aluminium snap beading ,screws aluminium fittings such as peg stays 150 mm long (1 No) , hinges type B-21 100 mm long (2 No )., suitable handle (1 no ) complete all as spd and directed

M&L Powder coated aluminium window and ventilator shutters , fixed type (thickness or powder coating n less than 50 micron) without sash bars ,aluminium sections 0.55 Kg /m incl necessary joining cleats ,glazing clips ,rubber packing ,aluminium snap beading ,screws complete all as spd and directed

M&L Powder Coating (minimum thickness of powder coating 50 micron) Aluminium Door,Windows ,ventilators frames with one or more rebates incl joining cleat for fixing etc complete all as spd and directed .

S&F Floor door stopper of aluminium alloy body 50 mm long with rubber shoes and all as specified.

S & F double action floor spring hydraulically regulated made up of minimum 1.25 mm thick aluminium alloy sheet foundation box, main body with stainless steel cover, governing pivot made of brass, other parts made of mild steel heavy duty and fixed in repair.

M&L 20 mm thick Granite (of any type) work (table rubbed and polished) in steps,staircase treads and risers, jambs,pillars,Door& window-cills, cooking plateform, and like in cement mortar(1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite and complete all as spd and directed incl demolition of old tiles/stone and all as spd and directed.

malik constructions

HANS ENGINEERS

Siya constructions

Puja Traders

M/S KAVITA CONSTRUCTION

OM CONSTRUCTION CO.

PRINCE CONSTRUCTION

B B BUILDERS

P.K. ENTERPRISES