PROVN OF SHED WITH HARD STANDING , SIDE WALL ETC AT 25 WEU AND OTHER SANCTIONED WORK AREA OF AGE BR-I UNDER GE (EAST) LUCKNOW.

Amount

Demolition of cement concrte in ground floor and paving not exceeding 15cm thick ( below or above ground level ) complete all as specified and directed.

Taking down cement plaster on brick or concrete surfaces, parapets including raking out joint, hacking for key, scrubbing down with water etc complete all as specified and directed.

Demolition of brick work built in cement mortar including all quions ,arcches , pillars etc complete all as specified and directed.

M&L brick work with fly ash brick in CM ( 1:6 ) with straight or curved on plan exceeding 6.0mtr mean radius complete all as specified and directed.

M&L for 15mm thick plastering on fair faces of brick wall or concrete surfaces in 1:6 cement mortar complete all as specified and directed.

Taking up or down 15 mm dia old serviceable /unserviceable steel tubing any grade and connection cleaning for re-fixing or removal to store complete all as specified and directed.

Cutting chases in brick wall built in cement mortar for concealed water tubing and making good with cement mortar in 1:4 ,cutting depth not exc 10 cm complete all as specified and directed.

S&F steel tubing medium grade ,galvanized with all fitting such as bend ,elbow, socket,tees,and fixed complete to wall or in ceiling or in floors including cutting threading and making forged bends on pipes MS hooks etc for 15 mm bore pipes complete all as specified and directed.

Dismantling broken/damaged PVC Water storage tanks and Supply and Fix rotational moulded polythylene water storage tanks, 500 Ltrs capacity, (Cylindrical vertical with closed top) hoisted and fixed in position complete all as specified and directed.

M&L RCC for Slab supported on walls beams and column in floor,roofs,landing,balconies,canopies deck slab and in shelves and the like complete all as specified and directed.

Fair finished Formwork to soffits of suspended slab such as roof slab ,floor slab ,landing and similar work not exceeding 200mm thick (horizontal or sloping) complete all as specified and directed.

Formwork to sides of concrete foundations, footings, bases of columns, raft and raft beams, sides and soffits (if any) of foundation and plinth beams; and similar work; vertical or to batter finished fair complete all as specified and as directed

Formwork to sides of pillars, posts, struts, piers, columns and stanchions finished fair complete all as specified and directed

M & L for TMT bars 10mm dia and over cut to length bent to shape required incl, cranking, bending spirally for hooping ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips conforming to IS:1786 complete all as specified and directed

Ditto all as per item No-14 above but 6 to 8 mm dia

S&F Non-skid joint free ceramic coloured floor tiles (square or rectangular) area of each tile exceeding0.11 sqm but n.exc 0.18 sqm in floors etc set and jointed in neat cement slurry and pointed in white or coloured cement to match over and including 15mm thick screed bed in cement mortar 1:6 complete all as specified and directed .

M&L for 450X300X7.8 mm thick joint free coloured ceramic tiles over and including 10 mm thick rendering in CM 1:4 on vertical surfaces such as on wall etc set and jointed in cement slurry and pointed in coloured cement to match complete in dado/skirting etc complete all as specified and directed.

Material and labour for machine cut kota stone slab flooring 18-20mm thick over and including 15mm thick screed bed in CM 1:6, laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing complete all as specified and directed.

S&F in repair 75mm outlet dia cast iron floor trap ,with grating including jointing to waste pipe fixed in cement concrete type B1 (1:2:4) complete all as specified and directed .

M&L for PCC (1:2:4) type B-1 as in flooring 40 mm thick using 20 mm graded stone aggregate complete all as specified and directed.

M&L for preparation of newly plastered surface and applying two coat of oil bound distemper over a coat of Birla/JK white putty 1mm thick and one coat primer surface fineshed even and smooth complete all as specified and directed.

M&L Rounding to edges of stone slab one edges,suchas in steps ,cooking plateform,and other similar situations complete all as specified and directed.

Taking down chowkats or frames with shutters (without taking off shutters from the frames) not exceeding 1.5 sqm complete all as specified and directed.

Taking down chowkats or frames with shutters (without taking off shutters from the frames) exceeding 1.5 sqm but n exc 4.00 Sqm complete all as specified and directed.

Taking down shutters of any description n.exceeding 1 sqm each complete all as specified and directed.

S & F Second class hard wood plain, solid, straight chowkats and frames, wrought, framed, rebated on the solid, rounded or chamfered, put together with glue pinned at joints including creosite painting to back side complete all as specified and directed.

Supply and fix 35mm thick, second class hard wood, factory made, glazed and skeleton door shutters, open rebated and prepared to receive glass, gauze etc divided into squares with rails and styles including cut and mitered beards for securing wire cloth etc. the size of members as specified in SSR-2009, Part I clause No 8.20 (a) complete all as specified and directed.

Supply and fix 30mm thick, second class hard wood, factory made, glazed and skeleton window shutter open rebated prepared to receive glass, gauze etc divided into squares, with plain, chamfered or rounded, mitred and rebated sash bars any numbers including cut and mitred beads for securing glass or wire mesh etc. for windows, the size of members as specified in SSR-2009 Part I clause No 8.20(b) complete all as specified and directed.

S&F 30mm thick flush shutter, solid core construction, with block board core and plywood face panels, commercial type on both sides complete all as specified and directed.

S&F 2nd cl H/W rail and style , 35mm thick factory made plain framed panelled shutters (two panel) with lock rail and panel of 9mm BWP commercial ply or 12mm veneered particle board with commercial veneering on both faces. The size of rail and stile as complete all as specified and directed.

S&F solid PVC door frame of size 50x47mm made out of 5mm thick plain colour PVC sheet reinforced with MS Square tube etc complete all as specified and directed. Make: Rajshree/Sintex

S&F factory made solid panel PVC door shutter 30mm thick (style) consisting frame made out of MS tube for top and bottom rail MS frame shall be covered with heat mould plaint colour PVC C channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for style and plain colour PVC sheet for top rail lock and bottom rail on either side and as gap insert for top rail and bottom rail plain colour PVC sheet tape fixed in MS frame welding sealed to the style and rail with suitable PVC sheet bearing and jointing together with solvent cement etc complete all as specified and directed. Make : Rajshree/Sintex

Supply and fix mild steel butt hinges 75 mm size cold rolled medium weight and fixed complete all as specified and directed.

Supply and fix mild steel butt hinges100 mm size cold rolled medium weight and fixed complete all as specified and directed.

Supply and Fix Extruded aluminium alloy handles fabricated type anodised 100mm size complete all as specified and directed.

Supply and Fix Extruded aluminium alloy handles fabricated type anodised 150mm size complete all as specified and directed.

Supply and Fix Aluminium anodised barrel tower bolts of extruded section, 100mm long complete all as specified and directed.

Supply and Fix Aluminium anodised barrel tower bolts of extruded section, 125mm long complete all as specified and directed.

Supply and Fix Aluminium anodised barrel tower bolts of extruded section, 150mm long complete all as specified and directed.

S & F in repairs galvanoised mild steel wire cloth of 0.56mm dia wire and average width of aperture 1.18mm & fixed with tacks or galvanised I wire staples complete all as specified and directed.

S & F galvanoised mild steel wire cloth of 0.56mm dia wire and average width of aperture 1.18mm & fixed with tacks or galvanised I wire staples complete all as specified and directed.

M/L in repair sheet glass ordinary quality 3mm thick and glazing with oil putty in squares. not exc 0.5 Sqm each complete all as specified and directed.

M&L for preparation of wooden surface of any description, not other wise described over 10 cm width or girth, applying two coat of synthetic enamel paint over one coat of rink primer on newly prepared surfaces complete all as specified and directed.

Dismantling wrought iron or mild steel work of any description not otherwise provided for complete all as specified and directed.

Dismantling AC sheet (Corrugated, Semi Corrugated etc) as in roofs etc including ridges complete all as specified and directed.

S&F hollow steel sections as in main sections as in main and cross beams, hip and jack rafters, purlins where connected to common rafters , fixed with angle cleats or other connecting plates etc. conforming to IS-4923-1997 GradeFe-410 quality `B’ complete all as specified and directed.

S& F of pre-painted galvalume aluminium zinc coating GI based corrugated steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in room covering/cladding to wall, including ridge cover fixed with self tapping screws etc complete all as specified and directed.

S& F of pre-painted galvalume aluminium zinc coating GI based plain steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in room covering/cladding to wall, including ridge cover fixed with self tapping screws etc all as specifed.

S&F in repair 10 Litres capacity PVC valveless syphonic action type flushing cistern low level, white with inlet ball valve float and handle including brackets connection to pipes and fixing of lever if any joint between flushing pipe and socket of WC pan pre-made complete all as specified and directed. Make : CERA/Slimline

S&F in repair S&F in repairs vitreous china squatting pan (Orissa pattern) water closet (white) of size 580x440mm with integral foot rests, 'P' or 'S' trap, including connection to trap and flushing pipe, antisyphonage pipe etc including provision of PCC (1:5:10) type E2 in filling, making good to floor, complete all as specified and directed.Make- Cera/Parryware/Hindware.

S&F in repairs kitchen sink with drainage board made of stainless steel 1mm for kitchen with plugs, washers and wastes, including fixing with cast iron cantilever brakkets, bedding in cement mortar on to dwarf wall, conntecting union to pipe, overall mimimum size 915mmx460mm with bowl size 410mmx330mmx160mm including 32mm dia waste pipe of polythelene of low or high density, 32mm bore chromium plated brass waster fitting with long screwed shanks and fly nuts, flage end bedded in red lead cement & other end fixed, making holes in walls for brackets and fixed in CM 1:3 or PCC 1:2:4 type B0, including taking down old unserviceable sink complete all as specified and directed. Make Nirali/Neelkanth/Jayna

S&Fin repairs 15mm dia fancy type chromium plated bib taps cast copper alloy with crutch or butterfly handle, scresed down screwed for iron pipe or for brass ferrule and fixed both ends for iron pipe or for unions complete all as specified and directed.

S&F in repairs vitreous china wash hand basin, white, flat back of size 600x480mm with & including a pair of cast iron brackets embedded in PCC 1:3:6 type C1 blocks of size 10x7.5x15cm, 32 mm dia PVC waste pipe and 32mm bore chromium plated brass waste fitting with long screwed shanks and fly nuts, flange end bedded in red lead cement & other end fixed, (excluding tap, waste chain & plug), complete all as specified and directed.

S&F in repair piller taps 15 mm cast copper alloy with capstan head chromium plated screwed down high pressure with or without lettered (hot or cold) with long screwed shanks and flynuts screwed for iron pipe and fixed complete all as specified and directed.

S&Fin repairs 15mm dia angle valve / cock to control water suitable for flushing cistern complete all as specified and directed.

S&F in repair PVC connection of 15 mm bore 600 mm long with brass coupling on both ends of superior quality complete all as specified and directed.PTMT nuts fixed as in repair.

M&L for 15mm thick plastering on fair faces of brick wall or concrete surfaces including chajjas etc in CM 1:4 complete all as specified and directed.

M&L for 10mm thick rendering ceiling surfaces on concrete surfaces in CM 1:4 complete all as specified and directed.

M&L two coat white wash on ceiling surfaces on newly plastered surfaces with preparation of surfaces complete all as specified and directed.

M&L preparation of newly plasteded surfaces and applying two coat of oil emulsion distemper complete all as specified and directed.

M&L two coat cement base paint on newly plastered surfaces with preparation of surfaces complete all as specified and directed.

Dismantling post or struts(wood,steel or RCC) any section,including,taking out embedded portion and making good disturbed ground complete all as specified and directed.

S&F, MS angle iron , swan neck ,fixed independently hand rails ,half or other stock or core for wooden hand rail straight portion,drilled and countershunk for baluster runningbars,for door,baluster,nosing to stepsincluding embeding in concrete and screwing etc wind ties for roof including securing bolts;posts and struts in fencing including cutting tops to shape as directed,drilling holes,notching to wire etc flat iron fillets for securing wiremeshetc including all necessary drilling,bolting or reviting etc and similar work conferming to Fe-290 Gde E-165 complete all as specified and directed.

S&F,galvanised, 2 strand , steel barbed wire 2.24 mm dia barbed with 2mm dia barbs at 75 mm spacing and straining and fixing to any type of standard rails ,straining bolts, securing and tying at crossings with and provision of galvanised mild steel wire, staple or steel pins etc. complete all as specified and directed.(each line wire to be measured).

M& L for PCC 1:3:6 type C-2 (using 40 mm graded stone aggregate) as post holes etc complete all as specified and directed.

M&L PCC 1:3:6 type C-2 using 40 mm graded stone aggregate 75 mm thick as in flooring complete all as specified and directed.

Supply only,chain link MS galvanised fencing any size or type complete all as specified and directed.

Fixing only chain link fencing including line wire, any mesh,size and type of standards,rails, straining bolts,etc including provision of binding wire complete all as specified and directed.

Supply only,mild steel bars in flats, round or square bars in available lengths, quality conforming to Fe-410-W (grade E-250) quality 'A' complete all as specified and directed.

Drilling and tapping holes, drilled upto 12 mm dia (and countersunk if required.) depth of bolts exc 12 but n exc 25 mm complete all as specified and directed.

S&F, mild steel screw bolts (machine made with hexagonal or square heads at one end and screwed the other or screwed both ends, each screwed end to be fitted with washers and one hexagonal or square nut, n exc. 5 cm long ( diameter of neck 11 to 15 mm) complete all as specified and directed.

M&L hard core of gauge n exc 63mm, deposited spred and levelled in layers n exc 15 cm thick ,warered and rammed to a true surface complete all as specified and directed.

Cement concrete 1:3:6 type C2 75mm thick as in flooring and in plinth protection complete all as specified and directed.

M&L for PCC1:4:8 type D2 ,using 40mm graded stone aggregate ,as in sub base of floor complete all as specified and directed.

M&L for machine pressed precast concrete interlocking paver blocks(Glossy Finish) of any shape ,size & Colour conferming to IS-15658-2006 of 60mm thickness M-35 grade with grey cement and pigment of the design & pattern complete all as specified and directed.

M&L sand filling under floors or in foundations including watering and consolidation complete all as specified and directed.

M&L cement concrete 1:2:4 type B1 using 20mm graded stone aggregate as in PCC Kerb complete all as specified and directed.

Demolition of lime/cement concret in any despription along with tar felt treatment and cement mortar bedding, any description including removal of debris or old material complete all as specified and directed.

Providing cement concrete type B-1, 1:2:4 (20mm graded aggregate) on roof slab s on levelling course complete all as specified and directed.

Rendering 10mm thick on fair faces of concrete surfaces in cement mortar 1:4, mixed with liquid water proofing compound finished even and smooth without using extra cement . (Liquid water proofing compound to be measured paid separately) complete all as specified and directed.

Supply only Liquid water proofing compound complete all as specified and directed.

M&L providing cement concrete type B1 1:2:4 (20mm graded crushed stone aggregate) as in roof kerb or mud stops,rounded or chamfered on edges complete all as specified and directed.

M & l for water proofing treatment to roof and edges (Vertical or tapered ) etc. in following sequence (i) Properly cleaning and drying the surface. (ii) Applying a coat of bitumen primer @ 0.3 kg/sqm. (iii) laying APP based polymetric membrane minimum weight 3 kg/sqm and minimum 3 mm thick reinforced with polyster non wove fabric(wt not less than 150 gms/sqm) with 100 mm over lap laid on primed surface by sealed and bonded to the surfaces by torchen method complete all as specified and directed.

M & L for applying two coats of bitumen based aluminium painting on water proofing treatment complete all as specified and directed.

M&L Brick work with fly ash bricks bricks straight or curved on plan to any radius in half brick lthick wall work built in CM (1:4 ) complete all as specified and directed.

S&F Steel windows with side hung shutter including projecting type hinges with steel handle and steel peg stay with glazing bars dovetailed or welded complete all as specified and directed.

M&L cement concrete chequered tiles glossy finish 20cm x20cmx20mm thick machine pressed set and jointed and pointed in neat cement slurry in floors and cut and polished complete all as specified and directed.

Excavation in post holes (or similar holes) each n exc .50 cum, getting out, returning , filling in and ramming earth or broken rubble mixed with earth around in layers n exc 25 cm, watering and removing surplus soil to distance n .exc 50m and making good surface complete all as specified and directed.

S&F steel work in tubular trusses included special shaped washer etc, complete using ERW or induction butt welded tubes conforming to IS-1161-1998 grade St-240 complete all as specified and directed.

S&F hard drawn steel wire fabric weight exceeding 4 kg /sqm cut to length,bent to shape required and tying with and including mild steel wire (annealed) not less than 0.9mm in dia supplied and fixed in reinforcement complete all as specified and directed.

S&F aluminium powder coated frame/chowkat of Alu door section of 100x44x1.30 to1.5 mm thick fixed with rawal plug and screw or wire expansion hold fasteners complete all as specified and directed.Make Jindal/Hindalco

Providing and fixing powder coated aluminium partly glazesd and partly paneled door shutter side hung type using 1.50mm thick standered door section having size of styles, top rails 83x44mm where as bottom rails will be made up of 100x44mm Make: Jindal/Hindalico including necessary joining cleats glazing clips, rubber packing, anodized aluminium snap beading screws, anodized aluminium fittings such as 100mm long 3 No. aluminium hinges B-21 ,type 01 No. aluminium tower bolt 200mm long and one no mortise lock 100mm size 4 levers (vertical type) and 01 No 300mm size long aluminium sliding bolt and 02 No fancey type fiber glass 150mm dia circular handle shall be provided to each door and glazing of top panel shall be made of 5.50 thick sheet glass make - Modi/ Saint gobin and pannelling shall be provided with 12mm thick exterior grade pre laiminated partical board with both side choice laminations, complete all as specified and directed.

S&F in repairs aluminium body door closer hydraulically regulated, designation No.3, universal type, suitable for door shutters of 851 to 1000 mm in width and of weight between 61 to 80 kg. and fixed complete all as specified and directed.

S&F alumium powder coated glazed window shutter sliding type using 1.30 mm thick aluminium open three track section having size of style & top rails 83x44mm, bottom rils 100x44mm Make jindal/Hindalco including necessary joining cleats, glazing clips, rubber packing, anodized aluminium snap beading screws, anodised aluminium fittings complete and glazing shall be done by using 5mm thick plain sheet glass Make- Modi guard/saint gobin) and steel wire cloth 0.63 mm nominal dia of wire and average width of aperture 1.40 mm complete all as specified and directed.

S&F aluminium powder coated grill (opening of gril not more than 100x100mm) fixed to windows or ventilators with anodised aluminium U channel 25x12mm size complete all as specified and directed.

M&L for 20mm thick granite (of any type) work (table rubbed and polished) in steps, jambs, pillars, window cills, cooking platform and like in cement mortar (1:4) including pointing in white cement (1:2) using marble dust and admixture of pigment to match with shade of granite complete all as specified and directed.

Removal of excavated soil to a distance exc 250 m but n’exc 500 m and depositing where directed at a level not exc 1.5 m above the starting point complete all as specified and directed.

Providing and fixing of E-board 'Everest' or equivalent make 600 x 600 x 6mm tk white prelaminated sett embosed reinforced desigener (lake & HM as approved ceiling board/tiles at all height laid on Armstrong Hot dipped powder coated Galvanised imposed grid with 24mm wide T-section exposed flanges which shall be powder coated white. The frame work will comprise of main runner made from 0.33mm thick GS sheet and of size 24x32x3000mm and spaced at 1200mm centers securely fixed to the structural soffits by approved hangers at 1200mm maximum centers. Hangers of GI wire 4mm dia to be fixed by approved rawl plugs, level and justers and screws etc. complete all as specified and directed.

S&F 250 mm long aluminium alloy, anodized, sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast aluminium alloy complete all as specified and directed.

Excavating in trenches, n.exc 1.5m wide and n.exc 1.5m depth for fdn, manholes, sewar line etc and getting out in hard/ dense soil complete all as specified and directed.

M&L RCC M-25 (Nominal Mix) using 20 mm graded stone aggr as in foundations, including rafts, footings, foundation beams; plinth beams; bases for columns, etc.; basement slabs, under-reamed piles and mass concrete complete all as specified and directed

M&L RCC M-25 (design Mix) using 20 mm graded stone aggr as in Columns, pillars, piers, posts and struts complete all as specified and directed

M&L RCC M-25 (design Mix) using 20 mm graded stone aggr as in beams, bands, cantilvers, bressummers, linters over 1.5m span etc complete all as specified and directed

S & F in repairs Steel rolling shutter 1.25 mm thick, without ball bearing, as specified including top cover, anchoring rod, hasp and staple and one shop coat of primer : erected in position complete all as specified and directed.

S & F, Safety lever locks mild steel with 4 levers for rolling shutters complete all as specified and directed.

S & F, Ball bearing for rolling shutters complete all as specified and directed.

Supply only lock plate made out of angle iron 35x5mm and MS block sheet 12 gauge including hand made handle, locking arrangement etc complete all as specified and directed.

M&L for preparation of newely plaster surface of wall and applying three coats of white wash complete all as specified and directed.

M&L two coat synthetic enamel paint over red oxide zinc chrome primer of steel surfaces of any description over 10cm in width or girth not otherwise described complete all as specified and directed.

S&F for framed work as in doors or gates of angles or other section with gusset plates, rails, braces etc. complete drilled for fixing of steel sheeting or other coverings, doors etc should be prepared for hanging or sliding with and including either hooks or hinges or steel hanging door fitting (exclusive of steel hanging door fittings and other coverings, running rails and guides and hanging also fastening and fixing complete quality conforming to FE-410W(gde E-250) quality B complete all as specified and directed.

Taking down carefully copper/aluminium point wiring (light, fan, socket, bell or power) complete including all electrical fittings & fixtures(DBs, submain,cables etc) and making good disturbed surfaces of wall , floor etc and matching wth original colour of wall, complete all as specified and directed.

Taking down carefully electric meter by disconnecting all electric connection and kept at site and refixing the same after completion of wiring including suitable concealed pressed steel box 175mm x100 mmx60mm with BL sheet connecting of electric connection complete all as specified and directed.

Taking down & re-fixing the same after completion of wiring including connecting of electric connection of ceiling fan/exhaust fan with three core copper flexible wire 23/0.0076 complete all as specified and directed.

M&L for one light/fan/exhaust fan point wiring controlled by one switch with PVC insulated unsheathed multi stranded copper conductor (FRLS) of size 1.5 Sqmm (for Phase colour code Red and for Neutral colour code Black) and one run of size 1.5 Sqmm PVC insulated unsheathed multi stranded copper conductor (FRLS) (as earth wire, colour code green) and connected to common earth dolly all as specified. , drawn through in and including concealed PVC Conduit medium grade, ISI marked not less than 19.5 mm / 20 mm dia (Make: Kalinga/Bajaj/Polypack/Seiko) along with conduit fixing accessories and with pressed steel terminal box thickness 1.6 mm painted with one coat of black bituminous paint as a primary and two coats of enamel paint with 3 mm thick laminated sheet (Make: Hylam) for provision of switches/regulators complete all as specified and directed.

All as per item No 115 above but 5 Amp socket outlet, independent.

All as per item No 115 above but on the same board.

All as per item No 115 above but for one bell/Buzzer point controlled by one push button on the same board with other switches or independent with 1.50 sqmm size cable.

All as per item No 115 above but 2.5 sq mm wire for one 15 Amps socket outlet independent with continuous PVC insulated single core green colour copper earth wire of size 1.5 sq mm connected to common earth dolly.

S&F in repairs switch piano flush type 5 Amp one way, single pole, 240 volts complete all as specified and directed.

S&F in repairs socket outlet 5 Amp, 5 Pin, 240 volt, flush type, complete all as specified and directed.

S&F in repairs bell push piano type, single pole 1 way 240 volt, complete all as specified and directed.

S&F in repair call bell , ding dong / musical, single phase 230 volts, complete all as specified and directed.

S&F in repairs switch socket outlet, two in one 5 & 15 Amp, 6 pin, multipurpose combination, complete all as specified and directed.ed.

S&F ceiling rose, 3 phase/PVC/polycarbonate, isolated body three terminals complete all as specified and directed.

S&Fixing in Replacement lamp holder bakelite with back plate suitable for batten fittings complete all as specified and directed.

S&F ceiling fan regulator electronic Stepped type for 1200/1400 mm sweep complete all as specified and directed.. Make:- Anchor/SSK/Bajaj.

Supply and fixing(in repairs) LED street light pressure die cast aluminium housing suitable for 70W IP 66 protection including MS clamps made of 25x3 mm flat iron with bracket of GI pipe light grade 25 mm dia and length not less than 1.2 mtr end of GI pipe complete all as specified and directed.Make : Philips Cat No-BRP409 LED CW 035 NR FG S1 PSU GR or equivalent in CG Cat No-LSTP-72-CDL/Havells Cat No-ENDURAPEALPLUSSL70WLED757SASYTOPC

Supply and fixing decorative LED lighting fixture with extruded Al. heat sink, environmental friendly, energy efficient ready to use suitable for 4’ LED tube complete all as specified and directed. Make: Havells Cat No REGALBATTENT8UPTO1X22WSSBSWH or equivalent in CG Cat No-DMLN1LT8-16/Philips Cat No-BN021C LED20S PSU NW GR .

Supply and fixing LED T8 IP 20 linear tubular lamp 22 watt(4') single end with PC body and PC diffuser complete with inbuilt driver complete all as specified and directed. Make: Havells Cat No-CRYSTAL1213T8DSTL;20WLED865SGLASS or equivalent in CG Cat No-LTT8-20/Philips cat No-915004565402.

Supply and fixing surface type LED down lighter 15 Watt with thermally conductive housing and PMMA diffuser complete all as specified and directed.Make: Havells Cat No-ENDURANEOHEURFACEDLS15WLED84OS or equivalent in Philips Cat No-915002621301/Crompton Cat No-LCSR-12-CDL/.

Supply and fixing LED bed side fitting 3 Watt 3000K 150lm complete all as specified and directed. Make : Philips Cat No-919215850349 or equivalent in CG/Havells.

Supply and fixing in repair wall bracket lantern cast aluminium body finishef with stove enameled with acrylic window cover.total lenfgt 380 mm & max projection breadth 212 mm. base provided 128mm x100 mm for wall mouting .B22 brass holder provided with aluminium cover suitable for 5 to 12 w led bulb .cat part no-mepro of WBL-04 complete all as specified and directed.

Supply and fixing as in repair DB TPN (double door) 4 Ways, 415 Volts including IP 43 bus bar neutral link, earth bar and din rail, recessed with wall surfaces by chase cutting and making good surfaces of wall complete all as specified and directed.

Supply and fixing as in repair MCB DB SPN (double door) 8 Ways including bus bar neutral link, earth bar and din rail, recessed with wall surfaces by chase cutting and making good surfaces of wall complete all as specified and directed.

Supply and fix single pole and neutral sheet metal enclosure with two pin and earth plug and socket complete with one single pole MCB 20 Amps complete all as specified and directed.

Supply and Fixing in replacement MCB, single pole, 240 Volts, curve 'C' of capacity (6-32 Amps) as ordered breaking capacity 10 KA complete all as specified and directed.

Supply and fixing in repair MCB SPN, 40 to 63 Amps, 240 Volts, curve 'C' of breaking capacity 10KA complete all as specified and directed.

Supply & Fixing in replacement MCB TPN 4 pole 415 volts, 100 Amps, curve 'C' of breaking capacity 16 KA complete all as specified and directed.

M&L for renewal of earthing complete with galvanised steel earth plate electrod 60cmx60cmx6mm thick burried directly in ground ( earth ) pit not less than 2.25mtr below normal ground ( level ) connected to and including using galvanised iron strip 25×4mm as earthing lead by means of bolts nuts check nuts and washers of galvanaised iron or steel including PCC pit in 1:2;4 type B-1 RCC cover with suitable handle and angle iron 40x40x5mm frame, excavation and earth work in any type of soil, medium grade GI watering pipe 20mm bore with funnel and wire mesh and light grade protetion pipe 15mm bore upto main board complete as shown on electrical plate No 5 of MES Sch 1991 ( part-I) and testing and completion.

M&L for sub main wiring with PVC insulated unsheathed cable with copper conductor multi strand two single core 4 sqmm including 4 Sqmm PVC insulated green colour earth continuity wire drawn through in and including 25 mm dia PVC concealed conduit complete all as specified and directed.

S&F cable 1100 volts grade heavy duty PVC insulated aluminium stranded conductor 10 sqmm twin core served with sheathing in service connection suspended by insulating hanger not more than 1m apart including 4mm dia GI suspension wire complete all as specified and directed.MAKE- Kalinga /Anchor /Seiko /Havells /Paragon /finolex/Plaza

S&F in replacement of surface mounted LED T8 tube light LUMINAIRE 20 Watt, 6500K of four feet long into and including LED tube rod 20W with intigrated electronic driver, T8 push fit type holders, connector block end caps suitable for surface and wall mounting including connecting up with FRLS 3 core cable in white colour outer sheath complete all as directed. Make Havells Cat No : REGALBATTENT8UPTO1X22WSSBSWH/Tube rod : 1213T8SSTL20WLED865SPC or CG Cat No GP 131 LT 8-16/LTT8-20 or Philps cat No TMC 100 1XT LED/MAS LED tube 1200 mm 18 w 865 T8 I-2100 Lumen

m/s raghubar dayal

M/S S S A ASSOCIATES

NEW BHARAT ENGINEERING AND CONSTRUCTION CO

Supreme Builders

M/s Reliable Electromech Systems