Providing Shelter for Storage of Engine Empty Containers Tooling Equipment Lifting Trolley Jigs GHE GSE Items etc at TARMAC Area LCA Division Plant I HAL BC Including Electrical Works

HINDUSTAN AERONAUTICS LIMITED BANGALORE FACILITIES MANAGEMENT DIVISION

NAME OF THE WORK: Providing Shelter for Storage of Engine Empty Containers, Tooling Equipment, Lifting Trolley, Jigs, GHE / GSE Items, etc., at TARMAC Area, LCA Division Plant - I, HAL [BC] – [Including Electrical Works]. CONTRACT NO. HAL/FMD/C-51/25-26

Name of the Contractor : x

Sl. No. Specification Quantity Unit Rate in Figs [Excluding GST] Rate in Words Amount

Preamble: (1) The subject work has been called on works contract basis and prevailing GST for same is 18%. Any change in GST +/- during the currency of contract shall be on HAL account. The Tenderer shall abide by prevailing GST act. (2) L1 (lowest quote) will be determined based on the total quoted amount including GST. (3) This BOQ specification has to be read in conjunction with relevant CPWD specifications amended upto date/ detailed technical specification in tender document and tender drawings if any.

Part 'I' - Civil works

1 Removing / transporting the surplus excavated earth( all kinds of soil) including debris, vegetation waste etc., to a distance upto 5000m / outside HAL premises / to contractor's own yard including loading, unloading, depositing, spreading, levelling, etc., all complete as directed by Engineer-in-Charge. 66.00 Cu m 318.38 Rupees Three Hundred Eighteen and Thirty Eight Paise Only 21013.08

2 Earth work in excavation by mechanical means (Hydraulic excavator) / manual means over areas in all kinds of soft / hard soil for foundations, footings, column pedestals or members as per the drawing, etc., (exceeding 30cm in depth, 1.50m in width) including removal of vegetation and in-equalities, shoring, strutting for protecting the sides of foundation if required, removing slips or falls in excavation, forming steps in sides of deep excavations and their removal or covering up, levelling, ramming the bottom of excavation, getting out and disposal of excavated earth lead upto 50m for all lifts with all labour, tools & tackles, plant & machinery, hire & fuel charges, etc., all complete as directed by Engineer-in-Charge. 219.00 Cu m 172.99 Rupees One Hundred Seventy Two and Ninety Nine Paise Only 37884.81

3 Returning / filling in with useful excavated soil (excluding rock), free from salts, organic or other deleterious matter (Other than black cotton soil & rock etc., in trenches, plinth, sides of foundations, etc., spreading in layers not exceeding 20cm thick, watering, breaking / removing clods exceeding 50mm, ramming and consolidation of each deposited layer, etc., with all labour, tools & tackles, plant & machinery, etc., lead upto 50m and for all lifts, etc., all complete as directed by Engineer-in-Charge. 153.00 Cu m 191.02 Rupees One Hundred Ninety One and Two Paise Only 29226.06

4 Providing, mixing and laying in position cement concrete (1:3:6) derived from natural sources of required thickness using 20mm down graded hard stone/granite aggregate in accordance with IS 456 in all works up to plinth level and in Flooring including mechanical mixing, transporting, vibrating, consolidation, levelling, curing, dewatering if any, all materials, labour, lead & lift, tools, plant & machinery, keeping concrete well wetted during the curing period and protecting it in extreme weather conditions, etc, all complete as directed by the Engineer-in-Charge. 22.00 Cu m 7109.25 Rupees Seven Thousand One Hundred Nine and Twenty Five Paise Only 156403.50

5 Formwork (Centering and shuttering including strutting, propping etc, and removal of form) for the following RCC members which are defined as below, in fair finished by providing timber, wooden planks, runners / M.S. sheets with all supports, struts, braces, wedges, scaffolds, bracings, ladders, gangways, dressing with oil including M.S. bolts nuts and washers, temporary openings, filleting for a stop, chamfered edges, internal / external splayed, rounded angles or grooves for forming throating including making temporary openings in the forms for pouring concrete etc., all complete as directed by the Engineer-in-Charge for the sub-items mentioned below. Note: Formwork material is contractor's own property and shall be removed after completion of work.

a) Foundations, footings, bases of columns, pedestal, steps, etc,. for mass concrete 84.00 Sq m 382.19 Rupees Three Hundred Eighty Two and Nineteen Paise Only 32103.96

6 Supplying, straightening, fabricating (cutting & bending), placing in position and binding steel reinforcement of TMT bars of not less than Fe 500 D conforming to IS 1786 for all concrete reinforcment members / works above/below plinth level, including cutting to length, bending to shape required, including cranking, bending spirally for hooping for column, hooking ends and binding with mild steel wire (Annealed) not less than 0.90mm dia or securing with clips, including fixing and bracing, wastage, welding, supporting or otherwise holding firmly in position so that the placing and ramming of concrete will not displace it, etc., complete all as per specifications, drawings and as directed by the Engineer-in-Charge. Note: a) Only authorized laps, chairs etc. shall be considered for measurement. b) The exposed Reinforcement bars shall be coated with cement slurry. 2.160 M T 105110.00 Rupees One Lakh Five Thousand One Hundred Ten Only 227037.60

7 Providing and laying in position ready mixed or site batched M25 Grade with minimum cement content of 330Kgs/m3 design mix cement concrete for reinforced cement concrete work using coarseaggregate and fine aggregate derived from natural sources, PortlandPozzolana / Ordinary Portland / Portland Slag cement, admixtures in recommended proportions as per IS: 9103 to accelerate / retard setting of concrete, to improve durability and workability without impairing strength including pumping of concrete to site of laying, consolidation, levelling, curing, scaffolding, all materials, labour, carriage for all leads & lifts; but excluding the cost of centering, shuttering, finishing and reinforcement, etc, all complete as directed by the Engineer-in-Charge. Note: (i) Mix design to be obtained from Govt. / NABL laboratory for site batching concrete.

a) All works upto plinth level including necessary openings and packing if any for laying pipes, cables, etc., 24.00 Cu m 9263.11 Rupees Nine Thousand Two Hundred Sixty Three and Eleven Paise Only 222314.64

8 Structural steel work riveted, bolted or welded in built up sections, trusses and framed work including industrial doors and thier fittings by cutting, hoisting, fixing in position and applying a priming coat of approved steel primer, etc, all complete as directed by the Engineer-in-Charge. 19.121 M T 130310.00 Rupees One Lakh Thirty Thousand Three Hundred Ten Only 2491717.45

9 Cement concrete pavement with 1:2:4 (1 cement: 2 coarse sand : 4 Coarse Aggregate) with garded stone aggregate 20mm nominal size), including finishing complete to match the side concrete surface levels, etc, all complete as directed by the Engineer-in-Charge. 20.00 Cu m 8376.63 Rupees Eight Thousand Three Hundred Seventy Six and Sixty Three Paise Only 167532.60

10 Providing, fixing, testing and commissioning single socketed pipes of 110mm dia, on wall face unplasticised Rigid PVC rain water pipes of 6Kgs/cm² SWR grade and of approved make conforming to IS : 13592 Type A, including jointing together with seal ring conforming to IS : 5382, leaving 10mm gap for thermal expansion and all necessary fittings & specials, bends, branches, sockets, clamps, pipe cutting and wastages, cutting and making good the walls, connecting to existing lines, etc., along with removal of existing rain water pipes, etc., all complete as directed by the Engineer-in-Charge. 36.00 R m 367.81 Rupees Three Hundred Sixty Seven and Eighty One Paise Only 13241.16

11 Providing and fixing precoated galvanised iron profile sheets (size, shape and pitch of corrugation as approved by Engineer-in-Charge) of total coated thickness 0.50mm (base metal of minimum 0.45mm thickness with total coating thickness of 0.05mm) with zinc coating 120 grams per Sq m as per |S: 277, in 240 mpa steel grade, 5-7 microns epoxy primer on both side of the sheet and polyester top coat 15-18 microns. Sheet should have protective guard film of 25 microns minimum to avoid scratches during transportation and should be supplied in single length upto 12 metre or as desired by Engineer-in-Charge. The sheet shall be fixed using self drilling / self tapping screws of size [5.50 x 55]mm with EPDM seal, complete upto any pitch in horizontal/ vertical or curved surfaces, excluding the cost of purlins, rafters and trusses and including cutting to size and shape wherever required, etc, all complete as directed by the Engineer-in-Charge. Note: A performance guarantee bond for 5 years for leak proof roofing shall be given by the contractor on non-judicial stamp paper of Rs.500/-. The 10% of completed value of this item shall be dedcuted as defect liability deposit and the same shall be returned after sucessful completion of 5 years from the date of completion of contract / project as a whole. 662.00 Sq m 719.88 Rupees Seven Hundred Nineteen and Eighty Eight Paise Only 476560.56

12 Providing and fixing Falshings up to width of 600mm precoated galvanised steel sheet roofing accessories of total coated thickness 0.50mm (base metal of minimum 0.45mm thickness with total coating thickness of 0.05mm) with Zinc coating 120 gram per Sq m as per IS: 277, in 240 mpa steel grade, 5-7 microns epoxy primer on both side of the sheet and polyester top coat 15-18 microns using self drilling / self tapping screws, etc, all complete as directed by the Engineer-in-Charge. Note: A performance guarantee bond for 5 years for leak proof roofing shall be given by the contractor on non-judicial stamp paper of Rs.500/-. The 10% of completed value of this item shall be dedcuted as defect liability deposit and the same shall be returned after sucessful completion of 5 years from the date of completion of contract / project as a whole. 42.00 R m 473.26 Rupees Four Hundred Seventy Three and Twenty Six Paise Only 19876.92

13 Providing and fixing Gutter to Girth 600mm precoated galvanised steel sheet roofing accessories of total coated thickness 0.50mm (base metal of minimum 0.45mm thickness with total coating thickness of 0.05mm) with Zinc coating 120 gram per sqm as per IS: 277, in 240 mpa steel grade, 5-7 microns epoxy primer on both side of the sheet and polyester top coat 15-18 microns using self drilling / self tapping screws complete. The gutter to facilitate the down take pies. Gutter hsll have end caps as well, etc, all complete as directed by the Engineer-in-Charge. Note: A performance guarantee bond for 5 years for leak proof roofing shall be given by the contractor on non-judicial stamp paper of Rs.500/-. The 10% of completed value of this item shall be dedcuted as defect liability deposit and the same shall be returned after sucessful completion of 5 years from the date of completion of contract / project as a whole. 25.00 R m 1280.31 Rupees One Thousand Two Hundred Eighty and Thirty One Paise Only 32007.75

14 Painting Steel surfaces of any description with two coats of synthetic enamel paint of approved colour, brand and manufacture to give an even shade, including preparation of surface by rubbing with fine grade of abrasive paper to ensure smooth, etc., all complete as directed by the Engineer-in-Charge. 1835.00 Sq m 220.50 Rupees Two Hundred Twenty and Fifty Paise Only 404617.50

15 Demolishing cement concrete Nominal concrete 1:3:6 or richer mix including design mix at floor level Manually / by Mechanical means including disposal of material within 50 metres lead, etc, all complete as directed by the Engineer-in-Charge. 24.00 Cu m 2372.36 Rupees Two Thousand Three Hundred Seventy Two and Thirty Six Paise Only 56936.69

16 Disposal of building rubbish / malba / similar unserviceable, dismantled or waste materials by mechanical means, including loading, transporting, unloading to approved municipal dumping ground or as approved by Engineer-in-charge, beyond 50m initial lead, for all leads including all lifts involved, etc, all complete as directed by the Engineer-in-Charge. 34.00 Cu m 257.24 Rupees Two Hundred Fifty Seven and Twenty Three Paise Only 8746.14

Sub-Total of Part 'I' - Civil Works (Excluding GST) Rupees Forty Three Lakh Ninety Seven Thousand Two Hundred Twenty and Forty Two Paise Only 4397220.43

Part 'II' - Electrical Works

1 Supply, fixing to existing MS perlins at approx. 6-7 mtr height, using suitable MS angle frame work with required fixing hardwares etc., as per site requirement, testing & commissioning of industrial type highbay LED lighting fixture of wattage not exceeding 80watts made out of high pressure diecast aluminium housing, diffuser made of high grade toughened glass(or as per OEM standards), integral control gear, eye hook and surge protection of 10kV(Internal/external) etc., . The technical parameters of lighting fixtures are as below: The luminaire should have Lumen efficacy ≥ 110lm/watt and lumen output not less than 8800lumens, PF>0.90 and Colour temprature shall be ≥5700K, CRI≥70, THD <10%, IP66/65 operating on single phase 230V voltage 50 Hz AC supply with voltage range 140-270V including necessary interconnections between driver and lighting fixtures and other standard accessories complete in all respects and as directed by Engineer in-charge. The fitting may be of Crompton model no: TIP-320-80-57-SL-GL-NSG/ Equivalent model in other approved makes. LED used in the lighting fixtures should be one of the approved make. LM79 certification for luminares & LM80 certificate for LED shall be produced. Note: MS supports will be paid separately. 12.00 Nos 10306.78 Rupees Ten Thousand Three Hundred Six and Seventy Eight Paise Only 123681.36

2 Distribution Boards

Supply, fixing, testing & commissioning of the following factory built powder coated Double door MCB/MCCB DB of any approved make fabricated out of M.S. sheet steel enclosure & necessary cutouts for operating the MCB knobs & comprising of 200 amps tinned copper busbars & earthing bus with tapped holes including internal wiring with stranded copper PVC wires or suitable size copper strips etc. & fixing the DB in flush with wall/ on wall as per site requirement with necessary M.S. angle supports, chipping the wall and replastering to smooth finish etc., wherever required as per site condition, complete in all respects, as directed by Engineer-in-charge and comprising the following as detailed below:

a) 4 way (4 + 12), Horizontal Double door MCB DB 1.00 No 4232.51 Rupees Four Thousand Two Hundred Thirty Two and Fifty One Paise Only 4232.51

3 MCCBs, MCBs & RCBO

Supply, fixing, testing & commisisoning of following rating MCCB/MCB/RCBO in the existing Distribution board/powder coated enclosure as directed by Engineer-in-Charge.

a) 40-63 amps. ratings , 4P MCB, "C" curve, 10 KA breaking capacity. 1.00 No 1638.98 Rupees One Thousand Six Hundred Thirty Eight and Ninety Eight Paise Only 1638.98

b) 6-32 amps. ratings , SP MCB, "C" curve, 10 KA breaking capacity. 12.00 Nos 264.85 Rupees Two Hundred Sixty Four and Eighty Five Paise Only 3178.20

4 Supply, laying, testing & commissioning of following size Aluminium LT armoured power cables.

a) Supply & laying in the already excavated cable trench/fixing on wall/duct wall with necessary M.S clamps / encasing in pipes etc., testing & commissioning of 3.5Cx25 Sqmm XLPE insulated Aluminium conductor 1100V gr. Armoured U.G cables complete in all respect as directed by EIC. 50.00 Mtrs 212.02 Rupees Two Hundred Twelve and Two Paise Only 10601.00

5 Supplying and making end termination with brass compression gland and aluminium lugs for following size of PVC insulated and PVC sheathed / XLPE armoured aluminium conductor cable of 1.1 KV grade as required

a) 3.5C X 25 sq. mm Al arm cable 2.00 Nos 323.82 Rupees Three Hundred Twenty Three and Eighty Two Paise Only 647.64

6 Supplying and fixing suitable size GI box with modular plate and cover in front on surface or in recess, including providing and fixing 2 X 3 pin 5/6 A modular socket outlet and 2 X 5/6 A modular switch, connections etc. as required 1.00 No 987.00 Rupees Nine Hundred Eighty Seven Only 987.00

7 Wiring for circuit/submain wiring along with earth wire with the following sizes of FRLS PVC insulated copper conductor, single core cable in surface/ recessed medium class PVC conduit as required.

a) 3 x 2.5 sq. mm copper wires 180.00 Mtrs 284.52 Rupees Two Hundred Eighty Four and Fifty Two Paise Only 51213.60

a) Providing and fixing 6 SWG dia G.I. wire on surface or in recess for loop earthing along with existing surface/ recessed conduit/ submain wiring/ cable as required. 50.00 Mtrs 43.46 Rupees Forty Three and Forty Six Paise Only 2173.00

9 Design, Fabrication, Supply and fixing/grouting in wall/ceiling of suitable size MS angle iron supports/ flat/ brackets for light fixture supports, as per site requirement and painting the same with two coats of synthetic enamel paint over a coat of zinc chromite primer complete in all respects and as directed by EIC/OIC. 40.00 Kgs 114.18 Rupees One Hundred Fourteen and Eighteen Paise Only 4567.20

10 Supply & drawing of 0.5 mm dia copper conductor PVC insulated 4 pair colour coded and twisted unarmoured telecommunication cables in the existing PVC conduit as per standard practice including necessary inter connections & end terminations. 30.00 Mtrs 52.54 Rupees Fifty Two and Fifty Four Paise Only 1576.20

11 Supply & fixing on existing GI/PVC Modular box testing & Commissioning of 1 No. of Twin RJ-11 telephone socket outlets with shutter including with necessary interconnections complete as directed by Engineer-in-charge. Note: Modular GI/PVC mounting box, base plate & front covers will be measured separately. 1.00 No 144.00 Rupees One Hundred Forty Four Only 144.00

12 Supply and laying of 63mm dia, PE-100, PN8 ISI marked HDPE pipe confirming to IS 4984:19955 including suitable jointing using welding as required in the excavated trench/duct/at road crossings for encasing cables complete in all respect as directed by Engineer-in-charge. 40.00 Mtrs 140.38 Rupees One Hundred Forty and Thirty Eight Paise Only 5615.20

13 Supplying & fixing of 25MM size of medium class PVC conduit along with accessories in surface / recess including cutting the wall and making good the same in case of recessed conduit as required. 20.00 Mtrs 141.08 Rupees One Hundred Forty One and Eight Paise Only 2821.60

14 Supplying and fixing of 100 x 50 x 1.6mm size Hot dip galvanised Perforated type cable tray, steel: As per IS:2062 / 1079, Galvanising : As per IS: 2629 / 4759 including all accessories like base slotted angle , horizontal elbow, horizontal tee, horizontal cross, horizontal reducer, vertical elbow up, inside, vertical elbow down, outside, coupler plate, fasteners etc. 30.00 Mtrs 650.94 Rupees Six Hundred Fifty and Ninety Four Paise Only 19528.20

15 Supply and drawing in the existing PVC conduits / wall / above false ceiling, 1RxCat 6 UTP 4-Pair cable including necessary interconnections complete for LAN & Internet point as directed by Engineer-in-charge. 60.00 Mtrs 55.46 Rupees Fifty Five and Forty Six Paise Only 3327.60

16 Supply & fixing in flush with existing work station cubical(Modular Table) wire ways cutouts/PVC race ways/Aluminium partition, testing & Commissioning of 2 no's 1 Module RJ-45 socket in Module plate(2M) for Data point including supply base plates, front covers, etc., with necessary interconnections complete as directed by Engineer-in-charge. 1.00 No 700.00 Rupees Seven Hundred Only 700.00

17 Supply & fixing on the building at a height of 5-8mtr approx. including supply and fixing GI pipe bracket made out of suitable dia class B GI pipe of 1.5Mtrs long bent to shape with necessary fixing hardwares etc., to fix on building and testing & commissioning of building light LED light fixture of wattage not exceeding 70watts and lumens output not less than 7700 lumens with necessary interconnections consisting of pressure die cast aluminum housing, optical cover made out of heat resistance toughened clear glass / polycarbonate with IP66, luminous efficiency ≥110lm/w at luminaries level, operating on single phase 230V 50Hz AC supply, efficient heat sink, colour temperature shall be 5700K+300K, suitable optics for maximizing the spread complete in all respects and as directed by engineer-in-change. The luminaries shall have specific lens for optical dispersion including control gear and power factor of control gear shall be >0.95. LM 79 certification for luminaries & LM80 certificate for LED shall be produced. Any approved make fitting meeting the above technical specification has to be supplied.The LED Light fixture shall be of Crompton model no:CRP-409-70-57-SL-GL-NSG /Equivalent model in other approved makes luminaries which meets the above technical specification. LED used in the luminaire should be one of approved make as per approved make list of HAL. 2.00 Nos 6296.61 Rupees Six Thousand Two Hundred Ninety Six and Sixty One Paise Only 12593.22

18 Supply and fixing of weather proof cable junction box with terminals of size 104 mm x 104 mm x 70 mm Hensel Cat. No. DK 0402 G or equivalent in Legrand/ Schneider/ Hagar make only. The Box shall be mounted on the truss using suitable size MS angle frame work(including) with painting as per EIC, with cable entry knock-outs, including rigid support for all components, Din channel, required fasteners totally enclosed, dust and vermin proof and degree of protection shall not be less than IP-65 complete in all respects and as directed by Engineer-in-charge. 9.00 Nos 1156.78 Rupees One Thousand One Hundred Fifty Six and Seventy Eight Paise Only 10411.02

Sub-Total of 'II' - Electrical Works (Excluding GST) Rupees Two Lakh Fifty Nine Thousand Six Hundred Thirty Seven and Fifty Three Paise Only 259637.53

Total of Part 'I' + 'II' (Excluding GST) Rupees Forty Six Lakh Fifty Six Thousand Eight Hundred Fifty Seven and Ninety Five Paise Only 4656857.96

The Tenderer has to Quote Percentage Above / Below as Specified and Percentage Shall be Quoted in Figures. Approximate Amount Put to Tender State Above or Below Percentage in Figures [Excluding GST] Amount

Tenderer's Quote (Excluding GST) 4656857.96 BELOW % 4656857.96

Add 18% GST Rupees Eight Lakh Thirty Eight Thousand Two Hundred Thirty Four and Forty Three Paise Only 838234.43

Grand Total (Including GST) Rupees Fifty Four Lakh Ninety Five Thousand Ninety Two and Thirty Eight Paise Only 5495092.39

Note: The tenderer has to quote percentage above / below against the total amount considering the specified standard rates. If the contractor does not quote any percentage above / below on the total amount, the tender shall be treated as invalid and will not be considered.

WARNING: PLEASE ENTER PERCENTAGE QUOTE

HINDUSTAN AERONAUTICS LIMITED

Facilities Management Division

Pre-Qulification Profile (To Be uploaded along with Part A)

Tender Ref No. or Contract No.: HAL/FMD/C-51/25-26

Name of Work: Providing Shelter for Storage of Engine Empty Containers, Tooling Equipment, Lifting Trolley, Jigs, GHE / GSE Items, etc., at TARMAC Area, LCA Division Plant - I, HAL [BC] – [Including Electrical Works].

Estimated Amount in Rs.: 5500000

Tender Notice Date : 18.08.2025

PROVISIONAL GST ID NO. for HAL 29AAACH3641R1Z3

Sl.No Description Details Enclosed / Not Enclosed Remarks

1 Name of the Individual / Firm / Company: * Mandatory Please Enter Name of the Individual/firm/company

2 Type of ownership PlsEnter Type of Ownership

If Other, please specify

3 Details of Constitution or Legal Status such as certificate of incorporation, shops and establishments, Contractor registration No etc., Pls enter Details of Constitution

4 Address for correspondence: Pls Enter Address

5 (a) PAN No.: Pls Enter Pan NO

5 (b) Service Tax Registration No

5 (c ) Goods and Service Tax ID No.

6 Contact details

Contact person name Please Enter Contact person Name

Mobile No. Pls Enter Mobile No

Ph. No. with STD code

FAX No. with STD code 2 #N/A

7 Registered Contractor

If Registered Contractor with HAL Yes/ No Related Document to be Uploaded to eProcurement Portal * Category: E= 75 Lakhs - Lessthan= 100Lakhs F= 50Lakhs - Lessthan 75 Lakhs G = 25Lakhs - Lessthan 50 Lakhs H = 10Lakhs - Lessthan 25 Lakhs I = 5Lakhs - Lessthan 10 Lakhs J = 2Lakhs - Lessthan 5 Lakhs K = Lessthan 2Lakhs 0 7 E 1

Registration No. 199999 7 F 2

Category 200000 6 G 3

PEMD Amount ( If paid ) 499999 6 H 4

8 I.T Returns for past 03 years 999999 5 J 6

2024-25 Pls Select 'Yes' ' No' for IT Return for All Three years 1000000 4 K 7

9 Average annual financial turn over during the last 3 years, ending 31st March 2024 of the previous financial year [ should not be less than 30% of Amount put to tender] 4999999 3

YEAR TURN OVER IN Rs. Enclosed / Not Enclosed REMARKS 5000000 2

2023- 2024 Rs. Pls Enter Turn over in Rupees for all the 3 years 7499999 2

Average annual Financial turn over 0.00 1650000.00

Avg Annual Turnover criteria is not met 10000000 1

10 ESI & PF Nos with proof Nos Enclosed / Not Enclosed

ESI Registration No/. with proof if any Remarks if any

PF Registration No. with proof if any

11 Bank(s) details: [Copy of the cheque leaf to be uploaded]

Bank Account No. Related Document to be Uploaded to eProcurement Portal (Note Canceled cheque leaf to be uploaded)

Name of the Bank

Type of Account

12 Latest Bankers Solvency Certificate from Nationalized/ scheduled Bank issued NOT before 12 months from the last date of Tender submission solvency cal

Name of Bank & Branch Pls Enter Details to 'Name of the Bank' , 'Date of Issue','Value in Rs #REF! 28-Jun 0 40000

Date of Issue 200000 40000

Value in Rs. 200001 150000

Solvency value is NOT as per NIT

13 Experience of having successfully completed similar works during last 7 years ending last day of previous month. [Latest work experience certificate may be uploaded] (i) THREE similar completed works each costing not less than the amount equal to 40% of the estimated cost. (ii) TWO similar completed works each costing not less than the amount equal to 50% of the estimated cost. (iii) ONE similar completed work each costing not less than the amount equal to 80% of Amount put to the tender. 2200000 500001 250000

Completed similar works during last 7 years Pls Select %of similar works completed during last 7 years 1000000 250000

Work NoI Type of Work: [ Incase of private works the same shall be supported with TDS certificate] Related Document to be Uploaded to eProcurement Portal 1000001 500000

Brief Description of Work: Please enter Details for Work No 1 2000000 500000

Completed value of Work in Rs. 2000001 1000000

Date of Commencement of Work 4000000 1000000

Date of Actual Completion of Work: 4000001 2000000

Work No II Type of Work: [ Incase of private works the same shall be supported with TDS certificate] Related Document to be Uploaded to eProcurement Portal 10000000 2000000

Brief Description of Work: Pls Enter Details for Work No II

Completed value of Work in Rs.

Date of Commencement of Work:

Date of Actual Completion of Work: work done

Work No III Type of Work: [ Incase of private works the same shall be supported with TDS certificate] Related Document to be Uploaded to eProcurement Portal #REF! 2555

Brief Description of Work: Pls Enter Details for Work No III #REF!

Completed value of Work in Rs.

Date of Commencement of Work:

Date of Actual Completion of Work:

14 Details of person holding the power of Attorney (If different from contact person)

Name Related Document to be Uploaded to eProcurement Portal

Mobile No. Pls Enter Details for Person holding Power of Attorney

Ph. No. with STD code

FAX No. with STD code

15 DECLARATION I

The document being viewed / downloaded from the website and having read & understood all the contents of the tender document mentioned under terms and conditions including price bid do hereby accept all the terms and conditions laid down in the said Tender document and will abide by the same on acceptance and ward of work.

16 DECLARATION II

I/We declare and confirm that - 1. All information and attachments submitted along with this offer are true and correct. 2. I/We are aware that any false information provided herein will result in the rejection of my offer. 3. I/We shall not make refund claims of expenditure incurred in processing this offer. 4. I / We aware that document sought only be uploaded for evaluation of offer. Pls Accept the Delaration II