1.2mm thick CO2 solid coil wire

Special Eligibility Criteria

1. 1

   For Regular Vendors : Approved vendors in ICF vendor directory for the tendered item ID 2300250003.

   Document requiredConfirmation required
2. 2

   For Developmental vendors : Developmental vendors in ICF vendor directory for the tendered item ID 2300250003. New / untried sources can be considered for limited quantity Developmental orders provided they should submit along with their offer details of available M&P along with statement of clause-wise compliance of STR. Such tenderers are to note that non submission of such documents shall be taken as they are not having capacity / capability of manufacturing tendered item and their offer is liable to be rejected and no back reference in this regard will be made.

   Document requiredConfirmation required
3. 3

   Where there are not more than three Indian suppliers categorized as Approved Vendor for a particular item, developmental vendors can be considered for placement of bulk order without any quantity restrictions. However, while considering such vendors, factors including past performance, capacity, delivery requirements, quantity under procurement, nature of item, outstanding order load etc. shall be considered in a transparent manner, subject to rates being reasonable. Quantity allocation among eligible vendors shall be based on pre decided tender criteria.Such orders shall be treated as bulk orders.

   Document requiredConfirmation required
4. 4

   As per Public procurement (Preference to Make in India) order 2017, as amended, tendered item is to be procured from Class-I Local Suppliers only and the vendors who do not qualify to be Class-I Local Suppliers should not quote in the tender as their offers shall not be considered for any ordering.

   Document requiredConfirmation required

Check List

1. 1

   In case of indigenous bidders, whether you are Large scale Industry or consortia of MSEs formed by NSIC, if yes, have you indicated quantum of sub contracts given to Micro and Small Enterprises (in percent of order value)?
2. 2

   Have you gone through the Eligibility Criteria and submitted all the documents mentioned therein?
3. 3

   Have you confirmed for compliance of Public Procurement orders of Department of Expenditure regarding countries sharing land border with India?
4. 4

   Have you furnished the statement of Equipment & Quality Control?
5. 5

   Have you furnished tender specific letter of authority (if manufacturer has not quoted directly) to bid on behalf of manufacturer as per Annexure-II of ICF bid document.
6. 6

   Have you kept your offer valid for the validity period as mentioned in NIT header?
7. 7

   Have you submitted the details of location(s) at which local value addition is made/proposed?
8. 8

   Have you submitted self-declaration with respect to non debarment under any provisions of DPIIT rules?
9. 9

   Have you submitted translated copy into English, for all documents in language other than English and all such documents should be signed by the authorised translator and notarized in India?
10. 10

    Have you submitted declaration for passing on the input tax credit as per para 2.8 and 2.9 of section-II of ICF Bid Document.
11. 11

    Have you submitted authenticated copy of the document authorizing the signatory to submit offer and commit on behalf of tenderers?
12. 12

    Unapproved/new firms, have you attached clause wise compliance of STR?

Commercial-Compliance

1. 1

   EARNEST MONEY DEPOSIT (EMD): - (i) Regarding EMD, please refer to clause 6.1 of section I instructions to tenderer of ICF Bid document attached to the tender. Tenderers seeking exemption from Payment of EMD must upload the requisite documentary evidence in support of their claim for exemption from payment of EMD along with the offer. (ii) Traders/distributors/sole agents/ works contract are not exempted from the payment of EMD as they are excluded from the purview of the MSE policy. (iii) In reference to condition no.6.1 (vi) of Section I of ICF Bid Document, the exemption of EMD is also applicable only to Vendors having current and valid registration with Zonal Railways/Production Units for any of these trade Group/trade groups 7605 - Electroded and fluxes (Arc welding, Ferrous and Non- ferrous), 7601 (Welding Rods Gas welding (Ferrous , Non-ferrous) & 7645 electrodes, graphite for furnaces. . Firm should submit valid registration certificate for proof.

   Document optionalConfirmation required
2. 2

   Public Procurement (Preference to Make in India) policy is applicable as per Clause 16 of Section-I of ICF Bid Document . The procurement shall be done in accordance with the extant instruction of DPIIT (Department of Promotion of Industry and Internal Trade) for Make in India policy.

   Document optionalConfirmation required
3. 3

   For passing the benefits of ITC, I hereby confirm following: We hereby declare that in quoting the above price, we have taken into account the full effect of Input Tax Credit available under GST. We, further agree to pass on any financial gain/benefit as may become available in future in respect of all the input tax credit on the date of supply by way of reduction in price and advise the purchaser accordingly. We also undertake that we are aware of the provisions of section 171 of the CGST Act and consequences thereof if we fail to comply with the same.

   Confirmation required
4. 4

   The bidders should quote the applicable HSN codes and it is the responsibility of the tenderer to quote the correct HSN code and upload the document.

   Document requiredConfirmation required
5. 5

   (i) In case of MSE firm willing to claim the benefits under Public Procurement Policy (Preference to MSE) order 2012, the firm should upload with their offer, the proof of their being MSE registered with the agency mentioned in clause 13.1 of section-I of ICF Bid document, failing which such offers will not be liable for consideration of benefits detailed in para 13.3 of section-I of ICF Bid document. ( i i ) As per Gazette notification no. S.O.4926(E) dated 18.10.2022 amending notification no. S.O.2119(E) dated 26.06.2020 circulated vide Railway Board letter no. 2020/RS(G)/363/1 dated 03.11.2022 regarding re- classification of enterprises and Udyam registration, In case of an upward change in terms of plant and machinery or equipment or turnover or both, and consequent reclassification, an enterprise shall continue to avail of all non-tax benefits of the category it was in before the re-classification, for a period of three years from the date of such upward change. In such cases, the tenderer claiming such benefits shall submit necessary documentary evidence along with offer. (iii) Tenderers shall upload Udyam Registration detail showing that the enterprise is owned by Scheduled Castes (SC) / Scheduled Tribes (ST) / Women entrepreneurs to claim the benifit under this sub-classification.

   Document optionalConfirmation required
6. 6

   It is certified that the item offered meets the local content requirement for Class-I local supplier.

   Document optionalConfirmation required
7. 7

   The tenderers shall indicate the details of their jurisdictional Assessing officers (Designation, address & email id) for GST.

   Document optionalConfirmation required
8. 8

   It will be presumed that the firms who have submitted the e-bid have gone through and accepted all the terms and conditions of tender, until and unless firms specify the deviations from those conditions and so indicated specifically, under the headings - "Technical Deviation Statement" and "Commercial Deviation Statements". And if space available is not adequate, tenderers can upload a Statement of Deviations and a reference of uploaded deviation statement shall be given in Technical or Commercial Deviation Statement. If there is any contradiction between any techno commercial terms and conditions quoted in e-offer and documents attached along with the e-offer, the terms & conditions quoted in e-offer will prevail over that of quoted in attached documents. Tenderers in their own interest are advised not to quote any techno commercial terms & conditions in attached documents.

   Confirmation required
9. 9

   Please submit the details of the location at which the local value addition is being made.

   Document optionalConfirmation required
10. 10

    Goods & Services Tax (GST): Will be applicable as per Clause 2.0 and all sub clauses of Section-II of ICF Bid Document .

    Confirmation required
11. 11

    Please enter the percentage of local content in the material being offered. Please enter 0 for fully imported items, and 100 for fully indigenous items. The definition and calculation of local content shall be in accordance with the Make in India policy as incorporated in the tender conditions.

    Document optional

1. 1

   Validity of Offer: No deviation from the offer validity period stipulated in the NIT header of this tender document is permitted. For additional conditions please refer Clause 12.0 of Section -I of ICF Bid Document.