CONSTRUCTION OF 3-KLD FAECAL SLUDGE TREATMENT PLANT (FSTP) AT VILLAGE MUKHDAMYARI, PANCHAYAT MADWAN - B

Earth work in bulk excavation by mechanical means (hydraulic excavator) over areas (exceeding 30 cmin depth, 1.5minwidth aswell as 10 m2 on plan) includingdisposalofexcavatedearthleadupto 50 metersandliftupto1.5m, asdirectedbyEngineer-in Charge. 2.7.1 All kinds of soil :

Providing andLaying of dry stone solinghandpacked in foundations/ roads INCLUDING carriages, CONSOLIDATION COMPLETE JOB

PrProviding and laying in position cement concrete of specified grade including curing but excluding the cost of centring and shuttering. All work upto plinth level with: 4.4.7 1:4:8 (1 cement : 4 coarse sand : 8 graded stone aggregate 40 mm nominal size) including carriage @ 20km for coarse aggregate ,5km for cement and sand

Providing and laying in position cement concrete of specified grade including curing but excluding the cost of centring and shuttering. All work upto plinth level with: 4.4.3 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size) including carriage @ 20km for coarse aggregate ,5km for cement and sand

Providing and laying in position specified grade of reinforced cement concrete including curing but excluding the cost of centering, shuttering, finishing and reinforcement. All works upto plinth level 5.1.2 1:1½:3 (1 cement : 1½ coarse sand : 3 graded stone aggregate 20 mm nominal size) including carriage @ 20km for coarse aggregate ,5km for cement and sand

Reinforced cement concrete work in walls (any thickness) including attached pilasters, buttresses, plinth and string courses, fillets, columns, pillars, piers, abutments, posts and struts upto floor five level including curing but excluding cost of centering shuttering, finishing and reinforcement. 5.2.2 1:1½:3 (1 cement : 1½ coarse sand : 3 graded stone aggregate 20 mm nominal size) including carriage @ 20km for coarse aggregate ,5km for cement and sand

Extra for use of water proofing compound in Cement concrete grade of M 20, at one kg of compound per bag of cement.

Steel reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding all complete upto plinth level 5.22.6 Thermo-Mechanically Treated bars of grade Fe-500D or more. Including all carriages

Brick work with common burnt clay (non-modular) bricks of class designation 7.5 in superstructure above plinth level upto floor five level Cement mortar 1:6 ( 1 cement : 6 coarse sand) including cariiage of 30 kms

Centering and shuttering including strutting, propping etc. and removal of form for: 5.9.1 Foundations, footings, bases of columns etc. for mass concrete.

Centering and shuttering including strutting, propping etc. and removal of form for: Walls (any thickness) including attached pilasters, buttresses, plinth and string courses etc.

Centering and shuttering including strutting, propping etc. and removal of form for:5.9.3 Suspended floors, roofs, landings, balconies and access platforms.

20mm Cement plaster of mix: 13.3.1 1 : 4 ( 1 cement : 4 fine sand) including all carriages

Providing and mixing water proofing material in cement plaster work in proportion recommended by the manufacturers:one kg /bag of cement

Providing and fixing unplasticised PVC pipes with working pressure 10 kg/sq.cm with pipe fittings, clips, making good the floor, including cost of all materials, labour charges, HOM and testing complete as per specifications.

uPVC single equal Tee (with door) 110x110x110 mm

110mm nominal dia end cap

110mm dia elbow

110 mm dia perforated sampling pipe

110mm dia perforated pipe

160mm dia pipes for support 10kg/cm² class (extra heavy)

Providing and laying of coarse aggregate of 120mm-150mm size free from debris and dust, includes procuring,transporation and laying into the anaerobic filter as per instruction of Engineer-in-chargeincluding all cariages

120 mm nominal size (at Inlet & at center)

120 mm nominal size (at outlet)

53 mm nominal size

20 mm nominl size

12 mm nominal size

10 mm nominal size

Sand/Artificial Sand/Manufactured Sand

Supplying/Casting and fixing Precast Reinforced Cement Concrete perforated slabs (2" dia hole) of following thickness in RCC 1:2:4, using following HBGS jelly including cost of reinforcement steel in position, cost of moulding charges, casting of slab, finishing, curing and fixing in position in all floors etc., complete complying with standard specification and as directed. Percolate channel perforated slabs (670mmx500mmX75mm)

Maintenance covers 600 mm x 600 mm x 50 mm

Perforated slabs 480 mm x 580mm x 75mm

Supplying & errection of RCC rings for well steining of 0.3 Mtr Depth using M-20 grade concrete using clean graded granite or trap or jelly of approved quality 20mm and down size well compacted including centering, formwork and plastering for both faces with C.M 1:3 proportion as per design using 6.50mm M.S. coil at the rate of 10 Kgs/ring including cost of steel and fabrication, bailing out of water, errection etc., complete. a) For 1.80m dia (clear) rings of steining thickness 0.075mm upto 1.8 M depth

Supplying/Casting and fixing Precast Reinforced Cement Concrete slabs of following thickness in RCC 1:2:4 (one cement, two sand and four aggregates), using following HBGS jelly including cost of reinforcement steel in position, cost of moulding charges, casting of slab, finishing, curing and fixing in position in all floors etc., complete complying with standard specification and as directed.

Procuring and installation of 1 HP pump for the maintenance of modules as specified by the EIC including service line from nearest source with all electric parts complete job

Fencing with R.C.C. post placed at required distance, embedded in cement concrete blocks, every 15th post, last but one end post and corner post shall be strutted on both sides and end post one side only, provided with horizontal lines and two diagonals of barbed wire weighing 9.38 kg per 100 meters (minimum), between the two posts fitted and fixed with G.I. staples on wooden plugs or G.I. binding wire tied to 6 mm bar nibs fixed while casting the post (cost of R.C.C. posts, struts, earth work and concrete to be paid for separately) :- Payment to be made per meter cost of total length of barbed wire used. 16.18.1 With G.I. barbed wire

Providing and fixing RCC precast fencing pole of size 0.15m x 0.15m x2.0m casted in CC 1:1.5:3 with 20mm downsize aggregate making holes for drawing barbed wire at 30cm c/c using 10 mm dia vertical 4 TMT steel rods and 8mm dia stirrups at 15cm c/c fixed 1.5m above ground level using steel moulding, curing, transportation to work spot including excavation in hard soil fixing in plain cement concrete 1:2:4 using 20mm downsize aggregate including aligning to plumb and line providing including cost of all materials, labour, hire charge of machineries lead, lift loading & unloading etc.,Complete.

Surface dressing of the ground including removing vegetation and in-equalities not exceeding 15 cm deep and disposal of rubbish, lead upto 50 m and lift upto 1.5 m in -All kinds of soil.

Banking excavated earth in layers not exceeding 20cm in depth, breaking clods, watering, rolling each layer with 1/2 tonne roller, or wooden or steel rammers, and rolling every 3rd and top-most layer with power roller of minimum 8 tonnes and dressing up, in embankments for roads, flood banks, marginal banks, and guide banks etc., lead upto 50 m and lift upto 1.5 m in All kinds of soil:

PROVIDING AND LAYING OF GSB /RBM OF DESIRED GRADE ABOVE SUBGRADE COMPACTED WITH ROAD ROLLER OF 8 TONNE CAPACITY including carriage COMPLETE JOB

By Mix in Place Method . Construction of granular sub-base by providing close graded Material conforming to specifications, mixing in a mechanical mix plant at OMC, carriage of mixed material by tippers to work site, for all leads & lifts, spreading in uniform layers of specified thickness with motor grader on prepared surface and compacting with vibratory power roller to achieve the desired density, complete as per specifications and directions of Engineer-in-Charge. 16.82.1 With material conforming to Grade-I (size range 75 mm to 0.075 mm) having CBR Value-30

Providing, laying, spreading and compacting graded stone aggregate (size range 53 mm to 0.075 mm ) to wet mix macadam (WMM) specification including premixing the material with water at OMC in mechanical mix plant, carriage of mixed material by tipper to site, for all leads & lifts, laying in uniform layers with mechanical paver finisher in sub- base / base course on well prepared surface and compacting with vibratory roller of 8 to 10 tonne capacity to achieve the desired density, complete as per specifications and directions of Engineer-in-Charge

Providing and laying bituminous macadam using crushed stone aggregates of specified grading premixed with bituminous binder, transported to site by tippers, laid over a previously prepared surface with paver finisher equipped with electronic sensor to the required grade, level and alignment and rolling with smooth wheeled, vibratory and tandem rollers as per specifications to achieve the desired compaction and density, complete as per specifications and directions of Engineer-in-Charge. 16.63.1A 50 to 100 mm average compacted thickness with bitumen of grade VG-10 @ 3.5% (percentage by weight of total mix) prepared in Batch Type Hot Mix Plant of 100-120 TPH capacity.

Providing and laying semi- dense Bituminous concrete using crushed stone aggregates of specified grading, premixed with bituminous binder and filler, transporting the hot mix to work site by tippers, laying with paver finisher equipped with electronic sensor to the required grade, level and alignment and rolling with smooth wheeled, vibratory and tandem rollers to achieve the desired compaction and density as per specification, complete and as per directions of Engineer-in-Charge. 16.64.1A 25 mm compacted thickness with bitumen of grade VG- 10 @5% (percentage by weight of total mix) and lime filler @ 2% (percentage by weight of Aggregate) prepared in Batch Type Hot Mix Plant of 100-120 TPH capacity.

SEAL COAT Providing and laying seal coat of premixed fine aggregate (passing 2.36 mm and retained on 180 micron sieve) with bitumen using 128 kg of bitumen of grade VG-10 bitumen per cum of fine aggregate and 0.60 cum of fine aggregate per 100 sqm of road surface including rolling and finishing with road all complete.

Providing and applying tack coat using hot straight run bitumen of grade – VG-10, including heating the bitumen, spraying the bitumen with mechanically operated spray unit fitted on bitumen boiler, cleaning and preparing the existing road surface as per specifications. 16.38.1 On W.B.M. @ 0.75 Kg/sqm.

Dry stone pitching, 225mm thick, including cost of stones and preparation of surface. 24.1.1 Quarry stone

Providing and fixing pre cast solid cement concrete kerb stones made out of C.C. 1:2:4 with top and bottom width 114 and 165 mm respectively, 400mm high and 450mm in length finished with CM 1 3 plastering and finishing cutting, including form work, curing, including cost of all materials, labour, hire charges of machinery, loading, unloading, lead and lift, transportation etc., complete.

Providing, fabricating,fixing of SS Screens using SS 304 bars, 20 mm spacing of 4 mm thick with handle (7.5kg) including cost of material, transportation, labour charges etc complete as per direction of Engineer in charge

Supplying and fixing of CI openable cover with frame and hinges, coat of epoxy coating including transportation, labour charges etc all complete. At screening chamber (600mm x 600mm)

Procuring and Planting rhizomes such as canna indica, water lily, vertiver, etc at an interval of 0.5 m including transportation & planting At PDB (4 plants per sqm) At PGF (4 plants per sqm)

110mm nomial dia vent cowl premium with wire mesh

Clearing grass and removal of the rubbish upto a distance of 50 m outside the periphery of the area cleared.

Felling trees of the girth (measured at a height of 1 m above ground level) including cutting of trunk and branches, removing the roots and stacking of serviceable material and disposal of unserviceable material. 2.27.3 Beyond 120 cm girth upto and including 240 cm girth.

Felling trees of the girth (measured at a height of 1 m above ground level) including cutting of trunk and branches, removing the roots and stacking of serviceable material and disposal of unserviceable material. 2.27.2 Beyond 60 cm girth upto and including 120 cm girth.

Earth work in excavation by mechanical means (hydraulic excavator) in foundation trenches or drains (not exceeding 1.5M in width as well as 105qm on plan) including dressing of sides ramming of bottoms lift up to 1.5M including getting out the excavated soil and disposal of surplus excavated soil within a lead of 1 M from edge of cutting

P/L Cement concrete ( 1 : 4 : 8 ) mix using 20 mm n/S agg.

Providing and Laying in position cement concrete in 1:3:6 Mix with 20 % Plum using 40mm N/S Nallah aggregate. Excluding cost of centering and shuttering-All works up to plinth level.

Providing and Laying in position Specific grade of reinforced cement concrete. Excluding cost of centering and shuttering-.(1 : 2 : 4 ) mix, using 20mm N/s agg.

Supplying and laying of stone soling hand packed tightly including ramming, watering and carriages complete.

12mm thick plaster in cement mortar 1:4 mix

Centering and shuttering including strutting propping etc. and removal of form work: Foundations, footings, bases of columns, mass concreting

Providing & fixing angle iron shutters Doors panelled with coloured PGI sheet or CGI sheet and ventilators with welded Mesh wire as per directions of the Engineer in-charge. a ) Door Shutters with frame angle iron 40x40x5mm

Providing & fixing angle iron shutters Doors panelled with coloured PGI sheet or CGI sheet and ventilators with welded Mesh wire as per directions of the Engineer in-charge. b ) Ventilators

Brick work with FPS bricks of class designation 75 in super structure in cement mortar 1:6 (1 Cement: 6 Coarse sand). Brick work with FPS bricks of class designation 75 in super structure in cement mortar 1:6 (1 Cement: 6 Coarse sand).

Providing and fixing Ist quality ceramic glazed wall tiles conforming to IS : 15622 (thickness to be specified by the manufacturer), of approved make, in all colours, shades except burgundy, bottle green, black of any size as approved by Engineer- in-Charge, in skirting, risers of steps and dados over 12 mm thick bed of cement mortar 1:3 ( 1 cement : 3 coarse sand) and jointing with grey cement slurry @ 3.3 kg per sqm, including pointing in white cement mixed wit

Reinforcement of RCC works including straightening, cutting, bending placing in position and binding all complete. mild steel and medium tensile steel bars

B) Suspended floors,roofs,landings,balconies etc.

P/F of pre-cast Circular hollow rings 3 feet dia of M-25 Grade including filling of Boulders in perimeter, pre-cast concrete circular cover .

Finishing walls with white cement based putty two or more coats to give smooth finish over plastered surface

Painting with silicon and acrylic emulsion based water thinnable sealer of approved brand and manufacture on wet or patchy portion of plastered surfaces: Two coats

Painting with two or coats of snowcem on exterior surfaces as per specification of SBM guidelines with SBM LOGO.

Carriage of materials : A) Sand and Agg, by MT for an avg. lead of 25 Kms

B) Bricks for an average lead of 80 Km

Providing and fixing water closet squatting pan (Indian type W.C. pan) with 100 mm sand cast Iron P or S trap, 10 liter low level white P.V.C. flushing cistern, including flush pipe (of approved make) with manually controlled device (handle lever) conforming to IS: 7231, with all fittings and fixtures complete, including cutting and making good the walls and floors wherever required. 18.1.2 White vitreous china Orissa pattern W.C. pan of size 580x440 mm with integral type foot rests.

P/F water storage tank 500 ltr with necessary fitting and fixtures including water tank nipple, washers ect complete job.

Providing and fixing 3 layer PP-R (Poly propylene Random copolymer) pipes conforming to IS: 15801, UV stabilized and anti-microbial fusion welded, having thermal stability for hot and cold water supply including all PP-R plain and brass threaded Polypropylene random fittings. This includes testing of joints complete as per direction of Engineer-in charge. 19.2.1 Internal work-exposed on wall with clamps at 1.00 meter spacing 19.2.1.2 PN-16 pipe , 20mm OD(SDR-7.4)

19.2.1.1 PN-16 pipe, 16mm OD(SDR-7.4)

P/F of P.V.C pipe (B-type) with necessary fitting and fixtures complete job. a)110 mm

P/F of stainless steel bib cock with 15 mm nominal bore dia.

Provision for Cost of Sign Board of brick tile back ground with granite sheet having engraved letters and base of cement concrete and Photographs, Cont.Amut