Gouribandha-I and II R/L

Amount

Schedule A(Civil works & Materials)

Earth work in excavation in hard soil in foundation within 50 mtr. Initial lead and 1.5 mtr. Initial lift including dressing and leveling the bed as per direction of Engineer-in-charge.

Filling F & P with sand well watered as per direction of E.I.C.

C.C. (1:4:8) with 4cm. size CBG metal etc. complete with curing as per direction of Engineer-in-charge.

Fly ash Brick (23cm x 11cm x 8cm) masonry work in cement mortar (1:6) with curing etc. complete as per direction of Engineer-in-charge.

12mm thick cement plastering with cement mortar (1:6) over brick work with curing etc. complete as per direction of Engineer-in-charge.

C.C. Work (1:2:4) with 12mm size CBG chips complete with curing as per direction of Engineer in charge.

RCC Work (1:2:4) with 12mm size CBG chips complete with curing as per direction of Engineer-in-charge.

Supplying fitting and placingi uncoated HYSD bar reinforcement including cost of binding wire complete as per direction of Engineer in charge.

Filling F & P with excavated hard soil including rough dressing and leveling, breaking clods to minimum size 5cm to 7cm as per direction of E.I.C.

Rigid smooth centering and shuttering for RCC works including false works and dismantling then after casting including cost of materials complete. a) For Roof Slab,Lintel

Supply of M.S. Door and Window having 32mmx 32mm angle iron framed choukath, shutter with 25mmx25mm angle iron frame covering with 18 SWG M.S. Sheet of size 0.80m. X 1.80m. Door and 0.60m. x 0.75m. window including Transportation andlabour charges for fixing

Labour charges for white washing two coats with shell lime as per direction of Engineer in charge.

Labour charges for colour washing two coats with stone lime & colouring materials as per direction of Engineer in charge.

Labour charges for painting two coats with approved enamel over a coat of red oxide primer paint of M.S. window as per direction of Engineer-in-charge.

Labour charges for conveyance, laying and fitting of 200mm/160mm dia PVC pipes as per direction of site Engineer-in-charge.

Labour charges for Welding of 200mm M.S pipes as per direction of site Engineer-in-charge.

Labour charges for conveyance, laying and fitting of 200mm M.S pipes as per direction of site Engineer-in-charge.

Cost and labour charges for writing display board including cost of materials as per direction of site Engineer-in-charge.

Cost and labour charges for fitting of air release valve in pressure pipe line including cutting and threading of 25mm dia GI Pipe (Both end) including cost of 0.30 mtr. RCC ring 3 Nos. and construction of protection tank as per direction of site engineer-in-charge.

Installation of 12.5/15 HP mono block pump set, on fixed foundation fitting of 100mm dia G.I. pipe in suction side and delivery side with required G.I. Flange, Bend, Socket, Foot Valve, NR Valve, Nut bolt, rubber packing, etc. cutting, threading, welding of G.I. Pipe connecting same to main pressure pipe line and other unforeseen items as required for smooth running of pumpset including transportation of materials as per direction of Engineer in charge.

Preparation documents for Elect aggrement and handing over LIP to P.P

Monoblock Centrifugal Pumpset of total head of 36M capable to discharge 1700 LPM, 12 K.W squirrel cage induction motor fitted with campanion flanges and CI “F” insulation suitable for operation at 415 Volt + 6% - 15%, 3 phase 50 Hz A.C. Power supply confirming to IS 9079/2002 with ISI mark and guarantee and testing at PTL, OLIC – Bhubaneswar as per direction of site Engineer-in-charge.

100mm dia Nominal Bore G.I Pipe having wall thickness 4.5 mm Electrical resistence welded of Medium class confirming to IS 1239 (Pt)- 1/2004) with latest amendments screwed at both ends as per IS 554 with socketed at one end and other end protected with plastic tread protector. The socket to confirming to IS-1239 (Pt)- II/1992 with latest emmendments with randam length of 4 to 7 mtrs. each pipe should bear ISI satisfaction and manufacturer name/trade mark as per direction of site EIC.

200mm dia Nominal Bore M.S Pipe having wall thickness 5.5 mm Electrical resistence welded of Medium class confirming to IS 1239 (Pt)- 1/2004) with latest amendments screwed at both ends as per IS 554 with socketed at one end and other end protected with plastic tread protector. The socket to confirming to IS-1239 (Pt)- II/1992 with latest emmendments with randam length of 4 to 7 mtrs. each pipe should bear ISI satisfaction and manufacturer name/trade mark as per direction of site EIC.

63AMP TP Main Switch specification as per direction of EIC

3 core x 16 mm2 insulated (HD) armoured Electric Cable with Aluminium conductor for use in 3 phase power system of working voltage up to and including 1100 Volts at 50 Hz confirming to IS 1554 (Pt-5)/ 1988 with ISI mark & guarantee as per direction of site EIC.

Rigid UPVC pipe of 200 mm dia class-II Ivory grey in colour having specific gravity of 1.4 to 1.46 Gm / CC of straight length of 6 M for portable water supplies confirming to IS 4985 / 2000 of BIS - Amendment - 2 Read with Table - I , of IS specification bearing ISI Mark for working presure of 2.5 Kgf/Cm2 as per latest amendment of ISI 4985 including cost of coupler for plain ended pipes or one end plain & other bell ended. The pipe should be tested by CIPET & each pipe should be clearly & indebile marked ink or Senciled conforming to IS 4985/2000.

Rigid UPVC pipe of 200 mm dia class-I Ivory grey in colour having specific gravity of 1.4 to 1.46 Gm / CC of straight length of 6 M for portable water supplies confirming to IS 4985 / 2000 of BIS - Amendment - 2 Read with Table - I , of IS specification bearing ISI Mark for working presure of 2.5 Kgf/Cm2 as per latest amendment of ISI 4985 including cost of coupler for plain ended pipes or one end plain & other bell ended. The pipe should be tested by CIPET & each pipe should be clearly & indebile marked ink or Senciled conforming to IS 4985/2000.

Rigid UPVC pipe of 160 mm dia class-I Ivory grey in colour having specific gravity of 1.4 to 1.46 Gm / CC of straight length of 6 M for portable water supplies confirming to IS 4985 / 2000 of BIS - Amendment - 2 Read with Table - I , of IS specification bearing ISI Mark for working presure of 2.5 Kgf/Cm2 as per latest amendment of ISI 4985 including cost of coupler for plain ended pipes or one end plain & other bell ended. The pipe should be tested by CIPET & each pipe should be clearly & indebile marked ink or Senciled conforming to IS 4985/2000.

Base for Motor of size 0.53mx0.28 made with 75mm M.S. Channel having suitable holes for fitting of different size and make 3 phase centrifugal mono block pump set from 10 HP to 20 HP colored with one coat of red oxide primer and two coats of smoke gray paint as per direction of Engineer-in-charge..

Motor Hood cover size 0.60 mtr.X0.45mtr.X0.45 mtr made with.18 SWG(cold rolled) M.S. sheet with one coat of red oxide primer & two coats of smoke Gray enamel paint on both the sides (in side & out side)suitable to cover 3 phase centrifugal mono block pump set from 10 HP to 20 HP & havng provisiion for attachment weith the groups on rear side of the pannel board as per direction of Engineer-in-charge.

Cost of 200 mm Ø M.S. Flange(Goribandha I & II one Pipe Line=12nos)

100mm dia. G.I. Bend

100mm dia. G.I. Flange

100mm dia. G.I. Socket

100mm dia. C.I. Foot Valve

100mm dia. C.I. N.R. Valve

110mm dia.PVC Tail Piece

110mm dia.PVC Flange

200mmx110mm dia PVC R/S

50mm dia. C.I. Air Release Valve including all

200mm dia PVC Tail Piece

200mm dia PVC Flange

200mmx160mm dia PVC R/S

160mm dia PVC Tail Piece

160mm dia PVC Flange

160mm dia PVC end cap

160mmx160mmx160mm dia.PVC Tee

150mmX150mmX110mm dia.M.S fabricated Tee fabricated with 100mm dai M.S raise rand bend including Locking arrange

Angle frame for Fitting with 12mm Ply for fitting Starter and Main swtch

Solvent Cement

4mm Sqr flat Copper Cable

⅝"X2⅟₂" M.S (F.T) Nut & Bolt

⅟₈ Thick Rubber Packing

Schedule B (Electrical Works)

Earthing installation with required earthing materials like charcoal, common salt, conduit pipe, soft solder alcaps, nut & bolts, cable socket etc. including excavation of earth pits 2 Nos. of size 1200mm x 1200mm x 3200mm for fixing of earthing pipe 2 Nos. of size 40mm dia x 3000mm length with required slotting in pipes and fittings with 40mm dia G.I. Flange etc. including excavation of earthing trench for laying of earthing G.I. Wire and filling the Trench pits after fixing of pipes on completion on earthing work, pannel wiring with required 4mm2 / 2.5mm2 PVC copper wire including supply and transportation of materials to work site as per the direction of site Engineer-in-charge.

Construction of 3 phase 11/0.4 KV line as per REC standard confirming to RE Rules 1956 with 300 kg 9 mtr Iong PSC Pole support in 70 mtr span 55 sqmm AAA Conductors, 11 KV ‘V’ Cross arm, with required No. of 11 KV T&C Disc. Insulators & 11 KV pin Insulators, carping & padding of poles, danger board at each pole, Anti climbing devices, stay set at Bending Point & Double Stay at end point with 18mm G.I.H.T stay concreting of stay with Anchore plate, guarding at Road crossing etc. including cost of all materials labour, transportation, inspection & commissioning etc complete.

Construction & errection of 11/0.4 KV,63 KVA D.P Mounted Substation confirming to RE rules 1956 3 star rated transformer mounted on 2.44 mtr. Long structure, supported in 300 Kg 9 mtr long PSC Pole-2 nos., transformer hard channel & top channel made of 2.8 mtr. Long 100x50x6 mm M.S. Channel, Transformer belting on 2.8 M long 50x50x6mm M.S. Angle (All REC SPN Std. F-30) with all accessories like 3 pole 11 KV HG Fuse (F-5) & A.B. Switches (F-9) both mounted on 2.8 mtr. Long 75x40x6mm M.S Channel and supported by 1.0 M long 50x50x6mm long M.S Angle with 3 No. 11 KV Lightening Arrestors & Distribution box including kit kat with fixing plate, bus bar,with M.C.B 300Amps for protection etc. for 63 KVA S/S pipe earthing (F-2), including cost of 95 Sqmm 3.5 core PVC cable carping & padding of poles, Danger board at each pole, Anti Climing Devices & all other massonary fittings i.e. required size Nuts& bolts, Brackets, cable sockets etc. including cost of all materials, labour, transportation complete with liasioning for testing inspection & commissioning etc. complete

M RAMADAS

LADU KISHORE TRINATH BEHERA