Recall Sampal Providing Functional Household Tap Connection Construction of Raw water Pumping Station Laying of Rising Main and distribution system in village Sampal Distt. Rohtak Construction of Raw water Pumping station Near Dadri Distributory at

Amount

Pumping Machinery RAW WATER PUMP SET Supply & erection of Horizontal spindle split casing type pumping sets of following duties directly coupled to AC squirrel cage induction type motor with accessories as described in Schedule No.II complete in all respect with priming arrangement with complete base frame a) RAW WATER PUMPING STATION NEAR Dadri Distributory at RD 29000-L

1400 LPM with 30 M. Head & 20 BHP

Supply and fixing following CI D/F pipe And sluice valves/non return valves/Reflex valves including cost of jointing materials, excavation, laying, jointing, refilling including making adequate supports of masonry/concrete/steel for delivery and suction pipe from bell mouth in the collecting tank upto the rising main laid by the department as per plan shown from the foundation wall of the pump chamber for all the raw water & clear water pumping sets at pumping station , as per specification given in schedule No. II Details of pipe. CI D/F (Raw water Pump House)

Supply, erection, testing and commissioning wall mounted electrical L.T panel board fabricated from 16 SWG CRCA sheet duly stouted with suitable angle iron frame work and completely powder coated of approximate size 1200x900mm & 400mm deep having following items:- (a) Incomer Switch 200 Amp (b) Aluminum bus bar Chamber 200 Amp capacity (c) Volt. Meter 100 X 100mm range to 500V (AE/KAPPA/L&T) (d) Indicating Lamp one set (Raw water Pump House ) (Inside Pump Chamber)

Floor mounted type electric Panel Board for motors for Existing W/W

LT Panel: Supply, erection, testing and commissioning (SITC) OF cubicle type, totally enclosed, free standing, floor mounted type, dust, damp and vermin proof, front openable, indoor type LT panel, necessary interlocking, powder coated, bus bar chamber and cable alley chambers, having complete fitting incoming and outgoing switchgears as per technical specification given in this tender ans as per required following item:- For Raw Water Pump Sets for 1400 LPM x 30 Mtrs. Head = 1 Nos. and for Clear water pump set 1500LPM x 40 M. Head = 1 No.( one for Each Pump set) at existing WW Sampal (a) MCCB 100 Amp 2 No. (L&T Siemens, ABB) (b) Volt meter 100x100mm range 0 to 500 volt =2 No. (AE/KAPPA/L&T) (c) Amp. Meter 100x100 mm range 0 to 100 Amp = 2 Nos. ( AE/KAPPA/L&T) (d) CT 100 / 3 Nos. ( AE/KAPPA/L&T) (e) VSS & ASS = 2 No. each No. of approved make. (f) SSP 4 Nos.approved make minilac (g) Motor starter, Star Delta 4 No. for 1400 LPM x 30 mtrs. Head Motor & 1500 LPM X 40 M Head (L&T, Siemens, ABB). (h) Capacitor KVAR as per site requirement (i) Indicating Lamp = One set

Supply erection testing and commissioning in HT epoxy type cable boxes for 35mm HT/11 KV XLPE 3 Core galvanized steel strip armoured cable including material/Required for complete erection of the same such as thimble lugs. Solder compound etc complete in all respects as described in schedule No.II as per approved NIT( At Pump house)

For outdoor Installation

For indoor Installation

DIESEL GENERATING SET AT RAW WATER PUMNP HOUSE The Rating should be at 1500 RPM

Design, Supply and erection of DG set 40 KVA of required capacity given below with acoustic of suitable rating with change over switch switch fenced encloser with plateform DG sets complete as per DNIT The rating should be at 1500 RPM a) Diesel Engine b)Alternator C) Battery 24V d) Base Plate e) 1X50 sq mm 3.0 core XLPE aluminum = 20m f)Tools A.M.F PANEL a) Motorised change over switch 63 Amp 4 P with fuse base and HRC links 63 Amp. b) under voltage/over voltage relay -2 No. 415 VAC c) Engine Start replay 24 VDC 1 No. d) Electronic Timber 24 VDC 1 No. e) Electronic Timber 24 VDC 2 No. f) Auxiliary relay 220 VAC -2 Nos. g) Auxiliary relay 220 VAC -3 Nos. h) Metering set 415 VAC -1 Set(Amp Meter, Volt meter , ASS, VSS, Phase Indicaters, Control Fuse, frequency meter, CT's) i) Metering set 24 V DC (Amp. Meter V-Meter)j) Overload protection for DC -1 No. k) Battery charger 24 V DC (Bluron make) l)Copper Bus bar of suitable size m)KWH Meter 96 sqr mm size n) Starting fuse button and key switch (on/off) O) Engine protction unit with Audiovisual alarm and shut down for low lubricating oil pressuere high collent tempreture p) Indicating lump for low lubricating oil pressuere high collent tempreture, set running, load on, DC Control on Note:- Control pannel shell have the provision to provide auto manual failure panel(AMFP)

a) Raw water Pump House 40 KVA

Transformer Design, Supply and erection of transformer of standered make required KVA 11/0.433 KVA rating outdoor type 11 KVA VCB panel G.O Switch H. Pole H.T metering panel, APFC panel battery charges, 11 KVA substation, entire cable netwrok from G.O switch to HT metering equipement and from HT metering to transformer from metering to transformaer, from teansformer to main LT panel, erthing safety equipement fenced enclosure for transformer and any other contingent thereto complete in all respect as per DNIT(Make KIRLOSKAR, Crompton & GEC) required at following sites as per respective capacity

A) Raw water Pump House 33 KVA

Providing and fixing of DI Air valve IVC Brand soft seated as confriming to ISI complete in all respect (200 mm DI rising main From Raw water Pump House existing water works 80 MM

Supply erection testing and commissioning of exhaust fans each having capacity of 45 cubic meters per minutes complete with suitable G,I Sheet Ducting in meter room and pump chamber and ergency for the sites (Pump house & water Works)

Supply erection testing of Ceiling fans of size 48" i/d (1200mm) of reputed ISI make complete in all rewspect (Pump house & water Works)

Supply erection testing of light fitting including wire in the pump chamber with material upto 10 points including switch, button plug PVC conduct pipe & copper wire etc as per approved specifications (Pump house & water Works)

Providing and fixing insulated Rubber matting suitable for HKV installation 1 meter X 2 meter X 12mm as per specifiaction (Pump House & water works)

Providing and fixing of PVC water Bar (Fixo-stop) with ribs & central bulbs of size given below confomed to IS-12200 of 1987 (Fixo-stop) along with the bitumen board including cost of bitumen filler complete i) 250mm wide X 8 to 11 mm thickness (1 No. RCC Raw water Reservior at pump House, 2 Nos. RCC & S&S Tank, 1 No. CWT at water works)

Supply erection testing and commissioning of flow meter (Krone Make) with digital display of 200mm dia i/d complete in all respect (For rising main & water works )

Supply and fixing of G.I Nipple 1/2" X 4" complete in all respect and the entire satsfaction of Engineer-in- Charge (Make Jindal/Parkash/Tata) complete in all respect

Supply and fixing of G.I Socket 1/2" complete in all respect and the entire satsfaction of Engineer-in- Charge (Make Jindal/Parkash/Tata) complete in all respect

Supply and fixing of G.I Elbow 1/2" complete in all respect and the entire satsfaction of Engineer-in- Charge (Make Jindal/Parkash/Tata) complete in all respect

Bidder Name

Amount

Sandeep Kumar(GSTN-NA)

M/S SHREE BALAJI BUILDERS(GSTN-NA)

M/S SHREE BALAJI BUILDERS

Sandeep Kumar