Mini Power Pump

Amount

Conduction Geocysical Survey with Scientific Instruments including transportation charges

Drilling of 150 mm bore well in Hard rock formation using rig including Erection of casing pipes,transportation and fuel charges of Rig to site and all labour charges etc complete.(As per Local market Rate)

Supply and delivery of 150 mmDia P.V.C.(cs)casing pipe as per standard specification(Cost Excluding GST,Rate as per TWAD Board-2024-2025)

Supply and delivery of following materials as per ISI specification including cost and conveyance to site and all labour charges etc complete

Supply and Delivery of 1 H.P submersible motor 50 lpmX175m head -Three Phase Without Panel board (IS 8034)(,Rate as per TWAD Board-2024-2025.)

Supply and Delivery of Panel board (DOL)for 1 HP submersible motor(Rate as per TWAD Board-2024-2025.)

4sq.mm PVC insulted copper flat cable(,Rate as per TWAD Board-2024-2025.)

40 mm Dia B-Class G.I.Pipes(Medium) for submersible motors in borewell(Rate as per TWAD Board-2024-2025.) (180+45)

40 mm dia G.I.Coupling((Cost Excluding GST,Rate as per TWAD Board-2024-2025.)

40mm dia G.I.Elbow(Cost Excluding GST,Rate as per TWAD Board-2024-2025.)

40mm dia G.I.Union(Cost Excluding GST,Rate as per TWAD Board-2024-2025.)

50 mm dia G.M Gate valve & Non Return Valves(Rate as per TWAD Board-2024-2025.)

150 mm dia Bore cap(Rate as per TWAD Board-2024-2025.)

150 mm dia Bore Clamp set(Rate as per TWAD Board-2024-2025)

Errection for labours charges for 1 HP submersible motor and pump set etc., completed-TWAD SOR-2024-2025(5 to 10HP).

Earthwork excavation and Depositing on bank initial lead of 10 Meters and initial liftof 2 Metres in narrow trenches for laying of pipes for watersupply and sewarage works in Hard stiff clay,stiff black cotton,hard red earth,shales,murram gravel,stoney earth,earth mixed with small size boulders and hard gravelly soil to the full depth as may be directed by departmental officers etc. complete complying with standard specification.

Plain Cement Concrete 1:4:8 mix (One Cement, Four Fine Aggregate and Eight Coarse Aggregate) Using 40mm ISS HBG metal for foundation and basement including dewatering if found necessary and laid in layer of not more than 15cm thick and consolidated including all cost conveyance of materials and labour charges etc. complete as per standard specifications and as directed by departmental Engineers(TNBP No.28).

Brick Work in CM 1:5 (One part of cement & five parts of sand) mix using Third Class Country Brick Kiln Burnt bricks 9¾ " x 4 3/8 " x 2 ¾" including cost and conveyance of materials to work site and including all labour charges for mixing, laying, curing the concrete etc., complete as per standard specifications and as directed by departmental Engineers – TNBP No:31

Plastering with CM 1:5 (One part of cement & five parts of sand) mix for 12mm thick including cost and conveyance of all materials to work site and including all labour charges for mixing, laying, curing,finishing etc., complete as per standard specifications and as directed by departmental Engineers – TNBP No:56&57

Supply and delivery and fixing of HDPE 1000 Liters tank as per IS 12701 / 1996 including loading, unloading, transportation and labour charges for fixing of the GI pipes and specials for pipe connection works including cutting, threading and fixing charges etc.,(Rate As Per T.W.A.D.S.O.R item No:17.0)

Supplying and fixing of 32Amps DP Switch with Metal Galad of 500 V with Fuse and Neutral (Side Handle) on T.W.Box with P.W.D.Earting(SD No.143)

Supply and run of 4 x 6 sq.mm (84/0.3) PVC insulated SC unsheathed Cu.Conductor of 1100V on 7/20 GI bearerwire for service connection mains(SD No.68)

Supply and run of 4 x 6 sq.mm (84/0.3) PVC insulated SC unsheathed Cu.Conductor of 1100V grade in 32mm diaGI pipe (Class 'B') suitably bent at both ends with necessary angle iron up right and end supports for mains(SD No.73)

SATHISHKRISHNA (BID ID -1220026)