Construction of four Grazier Hut at Bruni, Emopani and Jairo Valley

Amount

Surface excavation n exc 30 cm and averaging 15 cm and getting out in any type of soil.

Execution in post holes (or similar holes)each not exceeding 0.5 cum getting out retaining filling in and srammingearth broken rubble mixed with earth around in layer not exceeding 25 cm Hard /dense soil.

M&L for PCC 1:4:8 type D2 (Using 40mm graded stone aggregate) as in foundation, filling and mass concrete.

M&L hard core of gauge exc 63mm but not exc 100 mm depoted, spread and leveled in layers not exc 15 cm thick watered and rammed to a true surface broken stone or boulders.

Removing excavated material n exc 50m and depotingwhere directed at a level n exc 1.5m above the starting point.

Returning filling including spreading, leveling, watering and well ramming in layers n exc. 25cm.

S&F powder coating of any colour Aluminum sliding window and ventilator side hung type without sash bars aluminum section weighting 0.55 kg/m including necessary joining cleats glazing clips rubber packing rubber packing including all fitting complete all as specified and directed.

S&F powder coating of any colour aluminum frame for doors, windows, ventilators with one or more rebates including joining cleat for fixing etc. complete all as specified.

S&F 3mm thick sheet glass, ordinary quality and glazing with oil putty in n.exc 0.5Sqm each pane.

S&F Pre-painted galvatume aluminum zinc coating GI based corrugated steel sheet 0.50mm thick of ancolour having tensile strength of 550 Mpa as in roof covering /cladding to wall, fixed with self tapping screws as specified.

S&F Pre-painted galvatume aluminum zinc coating GI based plain steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering /cladding to wall, fixed with self tapping screws as specified.

S & F aluminum Anodised snap grid frame work of size 600mm x 600mm frame work for ceiling with aluminum tee section of size 23.5mm x 26.4mm x 1.4mm thick and aluminum angle section of size 36.5mm x 25mm x 1.4mm thick, for false ceiling including Hangers 6 mm dia. G.I. (upto 1200mm length) adjusting level fixed to roof slabs by means of ceiling cleats made out of G.I. flat 40 x 3 mm size 60mm long and expansion hold fasteners 12.5mm dia, 40mm long including 4 mm thick non asbestor E-board, HSPC fixed to frame complete all as specified and directed.

M&L Preparing new ceiling and applying two coats of oil bond distemper complete as specified and as directed.

M&L Ilnd class clean sawn hard wood 30 mm thick with butt joint planed both side fixed with nails in any situation.

M&L Ilnd class clean sawn hard wood scantling Timber framed.

M&L for two coats of synthetic enamel paint on new wooden surfaces over one coat of pink primer over 10cm width of girth including preparation of surfaces.

S&F pressed steel door frame 125x60 mm for doors with one or more rebates including necessary fixing lugs hinges lock strike plates complete as specified and directed (pcc filling of holloow section measured and paid separately)

M & L PCC typeC-1,1: 3:6 (20mm graded stone aggt) for cills,hold fast filling of hollow of pressed steel door frame etc

M&L for 35mm thick IInd class hard wood made at site plain, framed, paneled shutters (any number of panels), with panels of timber flat on both sides (feather edged), or of veneered particle board medium density, wood particle board with commercial face veneers, supplied and fitted to chowkats complete all as specified and directed.

S&F, 200 mm long aluminum anodised barrel tower bolts of extruded section and fixed as specified and as directed.

S&F, 125 mm aluminium handles cast type, anodised complete all as specified and as directed.

S&F 300mm long aluminum alloy anodised sliding door bolts, with haps and staples (bolt type) and fixing clips of sheet, cast oions or cast aluminum alloy and fixed. with bright bolt not less than 12mm dia with and including a minimum of 6 bolts and nuts, four on bolt plate and two on staple plate and fixed complete all as specified and directed.

M & L for 40 mm thick PCC 1:4:8, type B-2, (using 12.50 mm graded stone aggregate) as in under layer of tile flooring & finishing the surfaces rough to receive screed bed complete as specified and directed.

Transportation

BINA GHOSH (BID ID -3130143)

M/S. MATA VAISHNO DEVI ENTERPRISE (BID ID -3130043)

AARNA TRADERS (BID ID -3130787)

AMIT KUMAR GHOSH (BID ID -3133693)