SPL REPAIR TO BLDG NO. P-08 OF MH, SPL REPAIR TO ROOF TREATMENT OF BLDG NO. P-1 ALONGWITH CERTAIN REVENUE AND

Amount

B/R Portion Demolition of brickwork or stone/boulder masonry, built in cement mortar or cement lime mortar including all quions, arches, pillars etc, but excluding ashlar facings, dressed stonework and precast concrete articles etc complete all as specified & directed.

M&L for brick work with sub-class 'B' bricks (ols size), straight or curved on plan exc 6m mean radius built in In cement mortar 1:4 complete all as specified and directed

Taking down cement plaster on brick or stone walls incl.raking out joints hacking for key scrubbing down with water complete all as specified and directed

M&L for rendering 15mm thick cement plaster on fair faces of brick or concrete surfaces in cement mortar 1:6, finished even and smooth w/o using extra cement complete all as specified and as directed by Engineer-in-Charge.

M&L for rendering 15mm thick cement plaster on fair faces of brick or concrete surfaces in cement mortar 1:4 finished even and smooth without using extra cement complete all as specified and as directed by Engineer-in-Charge.

M&L for preparing new plasterd surfaces of wall applying cement based wall care putty of approved make 1mm thick (average thickness) uniformly where ever required and applying two coats of weather proofing exterior acrylic emulsion paint (applied @ 1.67 litre/10sqm ) of DULUX Weather shield Max or APEX ULTIMA or equivlent as approved by GE complete all as specified and directed.

M&L for preparing new plastered surfaces of wall and applying two coats of oil bound distemper over and incl a coat of primer over and incl a coat of wall care putty of 2mm thick (avg thickness) applied in two layers including rubbing with suitable sand paper complete all as specified.

Demolition stone slabs and tiles of any description or thickness in floors, aprons etc laid, bedded and pointed in any mortar complete all as specified and as directed by Engineer-in-Charge.

M & L machine cut kota stone slab flooring 20-25mm thick over and including cement screed bed 15mm thick in CM 1:6 laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing complete all as specified and as directed by Engineer-in-Charge.

M&L machine cut Kota stone slab 20-25mm thick in riser of steps, skirting, dado and pillar laid over cement screed incl backing coat 10 mm thick on fair faces of brick work in CM (1:4) laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing complete all as specified and as directed by Engineer-in-Charge.

Taking down chowkhats or frames with shutters (without taking off shutters from the frame) of area exc 1.50 sqm and n.exc 4.00 sqm each complete all as specified and directed.

S & F mild steel framed work as in doors or gates of angle or other section with gusset plates, rails, braces etc as in chowkhat., tie bar, hold fast, guard bars complete including drilled for fixing conforming to Fe 410-W (Gde- E- 250) quality- A complete all as specified and directed. Note:- Cost of welding butt hinges to the door frame deemed to included in quoted rate

M&L 35mm thick factory made plain, framed, paneled door shutters kiln seasoned and chemically pressure treated second class, hardwood (two panels) with lock rail and panel of 9mm thick BWP commercial marine grade ply wood bonded with high quality liquid phenol formal dehyde synthetic resin adhesive confirming to IS-710. The size of rails and style shall be as per IS-1003. The shutter shall be fitted to chowkhats as directed by Engineer-in-Charge.

S&F 100 mm size butt hinges, heavy weight, cold rolled mild steel complete all as specified and directed.

S&F 150mm size mild steel pressed handle, oval type, stove enameled black and fixed with steel screws complete all as specified and directed.

M& L 100mm size mild steel barrel tower blots, stove enamelled black, with bright bolt and fixed complete all as specified and directed.

S&F 250mm mild steel sliding door bolts, plate type, stove enamelled black, with bright bolt not less than 12mm dia with and including a minimum of 6 bolts and nuts, four on bolt plate and two on staple plate and fixed complete all as specified and directed.

M&L for preparation of new wooden or wood based surfaces of any description, over 10cm width or girth and applying two coats of synthetic enamel paint over a coat of pink primer complete all as specified and directed.

M&L for preparation of old wooden or wood based surfaces of any description, over 10cm width or girth, not otherwise described and applying a coat of synthetic enamel paint complete all as specified and directed.

M&L 75mm thick plain cement concrete 1:3:6 type C-1 (using 20mm graded stone aggregates) as in plinth protections, finished even and fair with joints 10 mm wide and in full depth at corners and @ 3m c/c filled with mastic mortar including necessary formwork complete all as specified and directed.

Demolition of cement concrete (unreinforced) in ground floor & paving n. exc 15 cm thick (below or above GL) complete all as specified and directed.

M&L for 75 mm thick cement concrete type D-2, 1:4:8 (40mm graded aggregate) as in sub base complete all as specified and as directed.

M&L sand filling under floors or in foundations including watering, spreading and levelling in layers of 25 mm thick complete all as specified and as directed.

M&L Chequered cement concrete tiles 20cm x 20cm x 25mm thick, set, jointed and pointed in neat cement slurry in floors with grey cement and no pigment complete all as specified and directed.

M&L pre-cast cement concrete block masonry with solid blocks type B1 1:2:4(using 20mm graded stone aggregate), exc 10 cm in width and setting in cement mortar 1:4 complete all as specified and directed.

S & F 3mm thick sheet glass ordinary quality and glazing with oil putty or wooden beads in squares n.exc 0.5 sqm in each pane incl haking out old broken glass (any thickness, size, quality or description) from wooden frames or stone, concrete or brick surrounds, glazed with putty or fixed with beads complete all as specified and directed.

Dismantling CGI/asbestos cement (corrugated, semi corrugated etc) sheets in roof coverings including ridges complete all as specified and directed.

S&F pre-painted galvalume aluminium zinc coating GI based corrugated steel sheet 0.5mm thick of any colour having tensile strenght of 550 Mpa as in roof covering/ cladding to wall, fixed with self tapping screws/J hook, L-type crancked hook complete all as specified and directed.

Dismantling timber in fillets, rails, posts, rafters, purlins, etc. under 40 sq. cm in section, in unframed work in any position complete all as specified and directed.

S&F rolled mild steel sections as in main and cross beams, hip and jack rafters, purlins where connected to common rafters and running rails and guides for sliding doors fixed with angle cleats or other connecting plates conforming to Fe410-W(Gde E-250) Quilaty A complete all as specified and directed.

S&F Steel windows with side hung shutters factory made including projecting type hinges with steel handle, and steel peg stay, complete with glazing bars, dovetailed or welded incl inserting the holdfast in stone masonay and make good the distrubed masonary complete all as specified and directed.

S&F Steel windows with side hung shutters factory made including projecting type hinges with steel handle, and steel peg stay, complete without glazing bars, dovetailed or welded incl inserting the holdfast in stone masonay and make good the distrubed masonary complete all as specified and directed.

M&L for preparation of newly plaster surface of wall and applying two coat of exterior emulsion weather proof paint over and including one coat of primer on walls complete all as specified and directed.

M&L for Walling of random rubble, uncoursed, well bonded, bedded and solidly hearted, built in CM 1:6 complete all as specified and directed.

Taking up or down 20mm bore steel tubing with connections including cleaning for refixing or removal complete all as specified and directed

S&F 20 mm dia GI tubing, medium grade, with all necessary fittings, fixed to walls and ceiling or laid in floor complete all as specified and directed.

Disconnecting existing water tank of capacity exc 500 and not exc 1000 litre, setting aside (or lowering if required) for repairs, cleaning etc and hoisting if required, reconnecting and re-fixing in same position including cleaning and removing all scale and dirt etc from tank and from mouths of circulating pipe etc complete all as specified and directed.

Dismantling old unserviceable RCC / PVC water tank of capacity exceeding 250 ltr and not exc 500 ltrs & removal from site complete all as specified and directed.

S & F 500 Ltrs capacity rotational moulded polyethylene water storage tanks double layered (cylindrical vertical with closed top) hoisted and fixed in position & making necessary arrangements for fixing inlet, outlet & over flow pipe pipe etc complete all as specified in SSR Part-I and directed

Taking down existing roof treatment complete including PCC and properly clean the surface to remove loose particles with wire brushes and removing the debris out side of MoD Land complete all as specified and directed by Engr-In-Charge

M&L for surface preparation by removal of all loose particle to ensure clean, smooth and dry surface and laying 25mm thick PCC type B-1, (1:2:4) using 20 mm graded stone aggregate finished even & smooth without using extra cement to cover negative slope into prop complete all as specified and directed

M&L for screed plaster 15 mm thick in CM 1:4 on roof surface complete and finished the surface even and fiar without using extra cement etc. to receive water proofing treatment complete all as specified and directed

M&L water proofing treatment to roof surface by applying a coat of cold aplied bituminous primer @ 0.40 ltr/Sqm conforming to IS-33894 and laying APP based polymeric membrane not less than 3mm thick, weighing not less than 3.5kg/sqm, reinforced with polyester non woven fabric (weighing not less than 150gms/sqm) shall only be used. It shall be laid by torch application. Side over laps shall be 75mm and the end lap shall be 100mm and all over laps and joints shall be sealed by torch application. For parapets, membrane shall be taken to a height of minimum 60cm and then inserted inside the parapet groove. This shall be finished by a membrane flashing including a coat aluminuium paint over APP membrane as per manufacturer instructions complete all as specified and directed. Note : The work shall be carried out by authorised applicator

M&L preparation of new steel surface of any description n. exc 10cm in width or girth and applying two coats of synthetic enamel paint over a coat of red oxide primer complete all as specified and as directed by Engineer-in-Charge.

Dismantling of stone patti as in roof slab provided below roof slab of any desc and thickness complete all as specified and as directed by Engineer-in-Charge.

M&L Jodhpur stone roof slabs, self faced 7.5 mm to 10 cm thick, 25 cm to 35 cm wire hoisted and set, joined and grounted in CM 1:3 complete all as specified and as directed by Engineer-in-Charge.

Dismantling wrought iron or mild steel work of any description not otherwise provided for complete all as specified and directed.

Taking down eaves gutters and rainwater pipes (any size or pattern), including all fittings, heads, shoes, bends, swan-necks, etc., including cleaning or refixing or removal to Store (measured overall as fixed along the centre line over fittings and accessories) complete all as specified and directed.

S&F 110mm dia PVC (SWR) pipes, single socketed in length with rubber ring joints fixed to wall or in floors with and incl suitable SS clamp complete all as specified and as directed.

Excavating in trenchs, n exc 1.5m wide and n exc 1.5m in depth for foundation, etc. or for shafts, wells, manholes etc or for laying of cables n exc 10sqm on plan and n exc 1.5m in depth and getting out in soft/loose soil complete all as specified and directed.

M&L PCC 1:4:8 type D-2 (using 40 mm graded stone aggregate) in foundations, filling and mass-concrete complete all as specified and directed.

M & L for preparing new plastered or unplastered surfaces of wall and applying two coats of cement base paint on walls over and including a coat of primer complete all as specified and directed

M&L Returning, filling in, including spreading, levelling, watering and well ramming in layers not exc 25 cm complete all as specified and as directed.

Removing excavated material to a distance n exc 50 m and deposited where directed at a level n exc 1.5 m above the starting point complete all as specified and as directed.

M&L providing precast cement concrete louvres and jallies 25mm thick (measured solid), type B0 1:2:4 (using 12.5mm garded stone aggregate) set in CM 1:4 including pillars for finshing at regular interval including all mouldings but excluding frame and taking down old one of 25mm thick (measured solid),complete all as specified and as directed. Note : Pre cast frame shall be measured and paid separately.

M & L rendering 10 mm thick cement plaster in CM 1:6 on fair faces of brick work or concrete surfaces finished even and smooth without using extra cement complete all as specified and as directed.

Supply only integral water proofing compund complete all as specified and directed.

S&F powder coated (minimum thickness of powder coating 50 micron) anodised aluminium door shutters, fixed / sliding type without sash bar, aluminium section weighing 0.55kg/m including necessary joining cleats, glazing clips, rubber packing, locks, anodised alumnium snap beading, screws etc. complete all as specified and directed.

S&F powder coated (minimum thickness of powder coating 50 micron) anodised aluminium window and ventilator shutters, fixed / sliding type without sash bar, aluminium section weighing 0.55kg/m including necessary joining cleats, glazing clips, rubber packing, locks, anodised alumnium snap beading, screws etc. complete all as specified and directed.

S&F powder coated anodised aluminium section (minimum thickness of powder coating 50 micron) for doors /windows / ventilators, door partitions including fabrication of frame and fixing with necessary lugs, cleats, rollers, handles, locking arrangement etc incl all accessories such as glazing clips, rubber beading for fixing glass panes in frame complete all as specified and directed. Notes : (i) Glass panes will be measured and paid seperately (ii) The quoted rate shall be inclusive of cost of rubber beading however it will be not be weighed and paid seperately.

S&F 5.5 mm thick antilo sheet glass frosted on one side, ordinary quality and glazing with aluminium beads and rubber gasket in square exceeding 0.5 sqm each pane complete all as specified and directed.

Supply and fix 15 micron thick coloured aluminium anodised grill design No DG-117,10 mm thick including F Sections complete all as specified and directed. Make :- M/s Deco grill / M/s Royal grill or Equivalent

S&F brass mortice lock, vertical type, size 100mm, 4 Levers with escutcheon plates & two keys fixed in aluminium frame complete all as specified fixed

S&F Door closer aluminium anodized extruded section body hydraulically regulated designation No-3 universal type suitable for door shutter of 851 to 1000mm in width and of weight between 61 to 80 Kg complete all as specified and as directed by Engineer in Charge.

S&F 100 mm size butt hinges, medium weight, cold rolled mild steel complete all as specified and directed.

S & F 200mm long aluminium anodised barrel tower bolts of extruded section and fixed complete all as specified and as directed by Engineer in Charge.

S&F 150mm Floor door stopper of aluminium alloy body and tongue, anodised, with hard drawn steel spring, overall length of cover plate 1.40mm complete all as specified and as directed by Engineer in Charge.

S & F stainless steel wire cloth, 0.36 mm nominal dia of wire and average width of aperture 1.40 mm and fixed with tinned tacks, or stainless steel wire staples complete all as specified and directed

S&F 300mm long aluminium anodised alloy sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet cast or extruded section and fixing bolts and sliding bolts of extruded section or cast aluminium alloy etc complete all as specified and as directed by Engineer in Charge. .

S & F mild steel drappery rod / curtain ro, chromium plated with brackets, end cups, rings @ 10 Nos per RM and fixed with PVC rawl plugs & steel screws and all accesories complete all as specified and as directed by Engineer in Charge.

M&L for 150mm thick PCC 1:3:6 type C-2 (using 40 mm graded stone aggregate) as in flooring complete all as specified and directed by Engineer-in-Charge.

M & L 100 mm thick plain Cement Concrete 1:2:4 type B-1 (20mm graded aggregate) in floor, finish the surfaces even and smooth without using extra cement including necessary form work complete all as specified and directed.

M&L Machine pressed precast concrete, rubber moulded, coloured interlocking paver block any shape and size, 60 mm thickness, confirming to IS 15658 - 2006, M-35 Grade with grey cement and no pigmnent complete all as specified and as directed.

M&L for 100mm thick plain cement concrete 1:4:8, type D-2 (using 40mm graded stone) aggregate as in sub base finished even and fair complete all as specified and directed.

S&F suspended false ceiling extra microperforation size of 600 x 600 x 12 mm ceiling tiles over and including suspension metal system (MICRO LOOK) designer grid (15 mm grid 8mm return) including necessary hanging system arrangement which is required to be made from existing rafter and purlins of trussed roof of building or RCC roof/ stone slab all as directed by Engineer-in-Charge.

M&L for vitrified ceramic tiles 10mm thick (square / rectangular) polished, area of each tile exc 0.18sqm and n exc 0.36 sqm in floor etc set and jointed in neat cement slurry and pointed in coloured cement to match the shade of tiles over & including 15mm thick screed bed in CM 1:6 complete all as specified and directed.

M & L for glazed coloured joint free ceramic tiles area of each tile exc 0.11 sqm but n exc 0.18 sqm, 7-8 mm thick, on vertical surfaces of wall such as dado, skirting etc set and jointed in neat cement slurry and pointed in coloured cement to match the shade of tiles over and including 10mm thick backing coat on surfaces other than fair faces of brick work in CM 1:4 complete all as specified and directed

M&L for 20mm thick granite (of any tpe) work (table rubbed and polished) in steps, jambs, pillars, window cills, cooking platforms and like in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite and rounding the edges of granite complete all as specified and directed

Supply & laying DWC pipe (Double wall corrugated ) of class SN-4, IS-16098 (Part –II) of size internal dia of 150 mm, laid in trenches and jointed complete with coupler, bend, tee, reducer etc complete all as specified & directed .

M&L precast cement concrete type B1 1:2:4 (20 mm graded aggregate ) set in cement mortar 1:4 in landing, cover slabs (for manholes etc.) chullah hoods,chajjas,water troughs, mangers,shelves and similar articles with plain faces including chamfers, weathering, throating etc complete all as specified and directed

M&L Mild steel TMT bars 10 mm dia and over, cut to length, bent to shape requried, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips complete all as specified and as directed.

M&L for Cutting into existing manholes for connecting new drains of 150mm internal dai of pipes, making good to pipe and rendering, cutting out existing benching for and forming branch channel (½ round or ¾ section) in cement concrete 1:2:4 type B-1 (using 20mm graged stone aggregate) smooth finished and reforming benching as required complete all as specified and as directed.

M&L for surface dressing not exc 15 cm deep in soft/loose soil complete all as specified and as directed.

M&L for providing 40mm thick damp proofing course to horizotal or vertical surfaces in cement concrete 1:2:4 type B-0 including necessary form work including WPC complete all as specified and as directed.

M & L rendering 20 mm thick cement plaster in CM 1:4 on fair faces of brick work or concrete surfaces finished even and smooth without using extra cement complete all as specified and as directed.

M & L rendering 5mm thick on fair faces of brick work or concrete surfaces on ceiling in CM (1:3) finished even and smooth without using extra cement complete all as specified and directed

M & L preparing new plastered surfaces of ceiling and applying three coats of white wash complete all as specified and directed.

M & L preparing new plastered surfaces and applying two coats of cement base paint, white or tinted on wall over and including a coat of alkali resistant priming paint all as specified and as directed

M & L for RCC type B1, 1:1.5:3 (nominal mix) (using 20mm graded aggregate) as in Slabs supported on walls, beams and columns in floors, roofs, landings, balconies, canopies, deck slabs and in shelves and the like complete all as specified and directed Note : Reinforcement shall be measured and paid seperately.

M&L RCC type B1, 1:1.5:3 (nominal mix) using 20mm graded stone aggregates in beams, cantilevers, lintels over 1.5m span complete all as specified and as directed. Note : Reinforcement & formwork shall be measured and paid for separately.

M&L Mild steel bars TMT bars 6 to 8 mm dia as in stirupps cut to length, bent to shape requried, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips complete all as specified and as directed.

M&L for formwork to sides and soffits of suspended slabs such as roof slab, floor slabs landing horizontal or slopping and similar works thikness n.exc 200mm including neccesarry sufficient supports for flat and rough finished surfaces of concrete etc complete all as specified and directed by Engineer-in-Charge.

M & L Formwork to edges of concrete flats, treads, breaks in floors, window cills, concrete railings, openings in concrete walls, floor and roofs n exc 20 cm wide and sides of RCC/ PCC bands in walls, horizontal or sloping and similar work exc 10cm but n exc 20 cm wide complete all as specified and as directed.

M & L formwork to sides and soffits of floor or beam, beam haunchings, grider, bressumber, lintels, cantilever, shelves including supports, over hang etc also splay between floor and beams to rough finish surface of concrete flat complete all as specified and directed by Engineer-in-Charge.

M&L hardcore of broken stones or boulders of gauge exc 63 mm but n exc 100mm, deposited spread and levelled in layers n exc 15 cm thick watered and rolled /rammed to a true surface complete all as specified and as directed.

M & L joint free coloured non skid ceramic tiles 300x300x7mm thick in floors etc. set and jointed in neat cement slurry and pointed in coloured cement to match the shade of tiles over & including 15mm thick screed bed in CM 1:6 complete all as specified and directed.

S & F solid PVC door frame of size 50mm x 47mm made out of 5mm plain colour PVC sheet reinforced with MS square tube of 1.25 mm thickness suppling & fixing in opening as per specification & drawing complete all as specified and as directed.

S&F Factory made solid panel pvc door shutter 30mm thick (style) consisting of frame made out of M.S. tubes for top & bottom rails, M.S. frame shall be covered with heat moulded plain colour PVC `C' channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail; Panelling of plain colour PVC sheet to be fitted in the M.S frame wedded/ sealed to the stiles, & rails with suitable PVC sheet beading, and joined together with solvent cement, suppling & fixing in the frame at site as per specification & drawing.

S&F 100 mm long butt hinges extruded aluminium alloy with galvanised mild steel hinge pin anodised, ISI marked, type B21 complete all as specified and directed.

S & F 150mm long aluminium anodised barrel tower bolts of extruded section and fixed complete all as specified and directed.

S & F 150mm long aluminium handles, cast type anodised complete all as specified and directed.

S&F 15 mm dia GI tubing, medium grade, with all necessary fittings, fixed to walls and ceiling or laid in floor complete all as specified and directed.

Cutting chases, pinning in, making good to facings where required and pointing in cement mortar 1:3 to ends or edges of landings, steps, cills,sunshades, shelves, lintels, etc.; and ctting chases for concealed water tubing or concealed conduit wiring, etc., and making good, cutting not exc 10cm girth complete all as specified and directed.

S&F vitreous china urinal half stall type white (Excluding flushing cistern, flush pipe and waste pipe etc) complete all as specified and directed.

S & F brass chromium plated shower rose 300mm size with swivel joint suitable for fixing with 15 mm bore pipe including shower arm 15mm bore size with bend of 45 degree with flange complete all as specified and directed

S&F 110mm PVC (SWR) WC connector with lip ring complete all as specified and directed by Engineer-in-charge.

S&F PVC valveless, syphonic action type, flushing cistern, low level or high level 10 ltr capacity, white, with intel, ball valve, float and handle including brackets, flushing pipe complete all as specified & directed.

S&F PVC connections 15 mm size with PTMT nuts of length 450 mm complete all as specified & as directed.

S & F cast iron floor trap 75mm dia outlet with grating including jointing to wastage pipe fixed in cement concrete 1:2:4 type B-1 complete all as specified and directed.

S&F 20mm bore fancy type stop valve (concealed type) cast copper alloy chromium plated screwed down, high pressure with crutch or butterfly handles screwed both ends for iron pipe or for unions complete all as specified and directed.

S&F angle/stop valves, cast copper alloy, chromium plated, fancy type with long shank and cup, screwed down high pressure, screwed both ends for 15 mm bore dia iron pipe or for union, ISI marked, complete all as specified and as directed by Engineer-in-Charge.

S&F 15mm bore bib tap, fancy type, cast copper alloy, with crutch or butterfly handle, screwed down, screwed for iron pipe or for brass ferrule complete all as specified and as directed.

S&F tubular towel rail 20mm dia 600mm long of cast copper alloy, chromium plated fixed with brackets and including chromium plated brass screws and wooden/plastic cleats complete all as specified.

S&F vitreous china wash hand basin, white flat back size 580X450 mm including cutting for and pinning in ends of brackets and including 32 mm dia waste coupling of PTMT (min weight 45 gms), 25mm dia PVC waste pipe 75 cms long with necessary fixing arrangement complete all as specified and directed.

S&F waste pipe 32mm for urinal with PTMT waste coupling and necessary fittings complete all as specified and directed.

S&F brass Chromium plated central hole basin mixer 15mm bore for mixing hot & cold water, screwed down with long sunk and fly nutsscrewed for 15mm dia pipe complete with nipple and arms complete all as specified and directed.

S&F Vitreous China, wash down water closet pan (pedestal pattern) white in colour with and including plastic seat cover white closed pattern with flat bottom and cover and MS chromium palted hinging device including connecton to outgoing pipe, size 580 x440 mm white, with integral foot rests (excluding flushing cistern and flush pipe) complete all as specified and directed.

S & F Ball valves high pressure of PTMT with epoxy coated aluminium rod and high density plastic ball screwed for iron pipe 20mm dia (minimum weight 210 gms) complete all as specified and directed.

S&F 75mm dia PVC (SWR) pipes, single socketed in length with rubber ring joints fixed to wall or in floors with and incl suitable SS clamp complete all as specified and as directed.

S&F PVC(SWR) 110 mm bore branch piece, single y equal or unequal with access door complete all as specified and directed.

S&F PVC(SWR) 75 mm bore branch piece, single y equal or unequal with access door complete all as specified and directed.

S&F PVC (SWR) bends any radius 110 mm bore complete all as specified and directed.

S&F PVC (SWR) bends any radius 75 mm bore complete all as specified and directed.

S & F factory made steel ventilator with top hung shutter including hinges, steel peg stay and handle complete including taking down all as specified and as directed.

S & F 3mm thick figured glass pin head type and glazing with oil putty in sqaures not exc 0.5 sqm in each pane complete all as specified and as directed.

S&F corner Glass shelf of size 300mm fixed with chromium plated brass screws complete all as specified and as directed

S&F corner Glass shelf assembly of size 200mm fixed with chromium plated brass screws complete all as specified and as directed

M&L for providing plain cement concrete 1:4:8 type D-2 (using 40mm graded stone aggregates) as in bed to SGSW drain pipe of 150mm bore including packing under and haunching against the sides of pipe after they are laid and tested complete all as specified.

M&L for 150 mm (internal dia) salt glazed stone ware pipes, grade A, laid in trenches over existing concrete bedding and jointed complete all as specified and as directed

E/M Portion Taking down carefully surface aluminum /copper point wiring, casing capping /PVC concealed conduit for (light, fan, socket, bell or power) including fixture and fittings such as switches, ceiling rose, regulators, sockets, light fittings etc and making good disturbed surfaces complete all as specified and directed.

M&L for point wiring with 1100 volts grade PVC insulated FRLS multistranded copper conductor cable 1.5 Sqmm (Phase-Red, Neutral-Black) and earth continuity conductor 1.5 Sqmm (Green) drawn into and including concealed rigid non metallic PVC conduit medium grade not less than 20 mm dia ISI marked ivory colour with all conduit fittings/fixing accessories and unwelded sunken galvanised pressed steel terminal boxes of thickness not less than 1.0 mm covered with 3 mm thick phenoic laminated white sheet cover for mounting switches, scokets, fan regulators as required for one light point controlled by one switch complete all as specified and as directed

,---ditto--- all as per item No. 133 above but for one fan point controlled by one switch and regulator complete all as specified and as directed

,---ditto--- all as per item No. 133 above but for one socket outlet 6 amp controlled by one switch on the same board with other switches complete all as specified and directed.

,---ditto--- all as per item No. 133 above but for one socket outlet 6 amp controlled by one switch on indepdendent board complete all as specified and directed.

M&L for point wiring with 1100 volts grade PVC insulated FRLS multistranded copper conductor cable 4.0 Sqmm (Phase-Red, Neutral-Black) and earth continuity conductor 4.0 Sqmm (Green) drawn into and including concealed rigid non metallic PVC conduit medium grade not less than 20 mm dia ISI marked ivory colour with all conduit fittings/fixing accessories and unwelded sunken galvanised pressed steel terminal boxes of thickness not less than 1.0 mm covered with 3 mm thick phenoic laminated white sheet cover for mounting switches, sockets as required for one 20 Amps socket outlet point controlled by one switch on independent board complete all as specified and as directed

M&L for point wiring with 1100 volts grade PVC insulated FRLS multistranded copper conductor cable 1.5 sqmm (Phase - Red, Neutral - Black) and earth continuity conductor 1.5 sqmm (Green) drawn into and including concealed rigid non metallic PVC conduit medium grade not less than 20mm dia ISI marked ivory colour with all conduit fittings / fixing accessories and modular sunken GI metal boxes not less than 1.0mm thick and incl white modular cover plates with frame for mounting modular switches, sockets, fan regulators etc for one light point controlled by one switch complete all as specified and directed.

,---ditto--- all as per item No. 138 here-in-before but for one fan point controlled by one switch and regulator complete all as specified and directed.

,---ditto--- all as per item No. 138 here-in-before but for one socket outlet 6 amp controlled by one switch on the same board with other switches complete all as specified and directed.

,---ditto--- all as per item No. 138 here-in-before but for one socket outlet 6 amp controlled by one switch on indepdendent board complete all as specified and directed.

,---ditto--- all as per item No. 138 here-in-before but for one bell point controlled by one bell push complete all as specified and directed.

M&L for point wiring with 1100 volts grade PVC insulated FRLS multistranded copper conductor cable 4 sqmm (Phase - Red, Neutral - Black) and earth continuity conductor 4sqmm (Green) drawn into and including concealed rigid non metallic PVC conduit medium grade not less than 20mm dia ISI marked ivory colour with all conduit fittings / fixing accessories and modular sunken GI metal boxes not less than 1.0mm thick and incl white modular mounting cover plates with frame for mounting modular switches, sockets, fan regulators etc for 3 pin 16 amps socket outlet point controlled by one switch on independent board complete all as specified and directed.

S&F socket outlet, 2-in-1, 3 pin 6 Amps flush type complete all as specified and directed.

S&F switch piano flush button single pole one way 6 Amp complete all as specified and as directed

S&F switch piano flush button single pole one way 16 Amp complete all as specified and directed.

S&F socket outlet, 2-in-1, 3 pin 6 & 16 Amps flush type complete all as specified and directed.

S&F ceiling rose 3 plates polycarbonate body complete all as specified and as directed

S&F angle holder, insulated polycarbonate body with back plate complete all as specified and directed.

S&F switch modular 1 way 6 Amps, 230 volts, 1 module complete all as specified and directed.

S&F modular switch 1 way 16 Amps, 230 volts, 1 module complete all as specified and directed.

S&F modular bell push, 6 Amp, 1 module complete all as specified and directed.

S&F door bell, AC 240 volts, single pole complete all as specified and directed.

S&F modular socket 6/16 Amps, 2/3pin combined 2 module AC 230 volts complete all as specified and directed.

S&F modular socket 6 Amps, 2/3 pin combined 2 module AC 230 volts complete all as specified and directed.

S&F modular hum free electronic step fan regulator 120-280 volts of 100 watts capacity (socket type) including connecting up complete all as specified and directed.

S&F in replacement of LED bulb 9 watt complete all as specified and directed.

S&F MCBs Distribution board TPN 4 ways, powder coated, CRCA steel sheet, IP-43, IK09 with reversible double door, 415V, recess mounted having insulated 200 amp tinned copper bus bar, neutral bus bar, earth bar, din bar, detachable gland plate, blanking plate in unused spaces as required, ISI marked including required wiring connections with copper lugs of suitable size provided in MCB DBs complete all as specified and directed.

S&F MCBs Distribution board SPN, 8 ways, powder coated, CRCA steel sheet, IP-43, IK09 with reversible double door, 415V, recess mounted having insulated 200 amp tinned copper bus bar, neutral bus bar, earth bar, din bar, detachable gland plate, blanking plate in unused spaces as required, ISI marked including required wiring connections with copper lugs of suitable size provided in MCB DBs complete all as specified and directed.

S&F MCBs of 'B' curve single pole 6 to 32 Amps having breaking capacity 10 KA, ISI marked including required wiring connections with copper lugs of suitable size provided in MCB DBs complete all as specified and directed.

S&F MCBs of 'B' curve double pole 10 to 32 Amps having breaking capacity 10 KA, ISI marked including required wiring connections with copper lugs of suitable size provided in MCB DBs complete all as specified and directed.

S&F MCBs of 'B' curve SPN 40 to 63 Amps having breaking capacity 10 KA, ISI marked including required wiring connections with copper lugs of suitable size provided in MCB DBs complete all as specified and directed.

Supply and fix MCCB TPN 63 Amp, 16 KA, adjustable type Complete all as specified and directed.

S&F LED batten (1.2M) made of CRCA sheet housing with a PC glossy diffuser duly prewired connection having a nominal system lumen output of 2000 lumens at a minimum system efficiency of 105 lumen per watt and total power consumption not more than 20 watt including driver. It has a rated system life time of 40000 burning hours at L70 and should have a colour temperature of 6500K, CRI>80, THD<10% and PF>0.95 complete all as specified and directed. Make - Philips Cat ref No. ENDURALED BATTEN "BN 308C LED20S PSU CDL WH, Bajaj cat ref No. BLTRU 20W WH VIVA or Havells Cat No. 600BS20WLED840SPCWH as approved by GE.

S&F LED batten (0.6m) made of CRCA sheet housing with a PC glossy diffuser duly prewired connection having a nominal system lumen output of 900 lumens at a minimum system efficiency of 115 lumen per watt and total power consumption not more than 10 watt including driver. It has a rated system life time of 40000 burning hours at L70 and should have a colour temperature of 6500K, CRI>80, THD<10% and PF>0.95 complete all as specified and directed.

S&F LED bulk head light fitting 9/10 watt IP 66 & IK 09 with polycarbonate body with LED driver duly prewired connection with 0.75sqmm PVC insulated & sheathed three core flexible multi stranded copper conductor cable complete all as specified & directed.

S & F 20amp, single pole and neutral socket outlet, with 2 pole and earth metal enclosed plug top in powder coated CRCA steel sheet enclosre recess mounted with chained matel cover for socket out let with and incl one single pole B curve MCB 20 Amps complete all as specified and directed.

S&F water heater 25 litre capacity BEE star rating 5 in approved colour, heating element 2.0 KW, adjustable temperature setting knob for temperature setting between 25° C to 75° C and avoid overheating of water, outer tank made of metal, inner tank made of extra thick superior cold rolled steel provided with high density PUF insullation, safety valve, thermostate, NRV etc complete all as specified and directed.

S&F heavy duty stainless steel connection pipe, 15 mm bore 450 mm, suitable for hot and cold water, premier quality, 304 grade stainless steel alongwith copper inner joint, EPM tube with two numbers brass chromium plated nuts at end alongwith double ring sealing washer to prevent leakage complete all as specified and directed.

M&L for earthing with galvanised steel earth plate electrode 600 mm x 600 mm x 6 mm thick burried directly in ground (earth pit not less than 2.25 metres deep below normal ground level) with top edge of plate not less than 1.5 metre below normal ground level connected to galvanised earth lead wire 4 mm dia by means of steel bolts, nuts, check nuts and washers all as shown in electrical plate no 3 of MES Schedule Part-I connected to earthing point and testing on completion with and including 15 mm bore light grade G.I. protection pipe (upto 7.5 metre beyond outer edge of earth pit) making PCC pit of size 0.3m X 0.3m X 0.3m (inner size) in mix 1:3:6 type C1, 40 mm thick cover reinforced with 6 mm dia M.S bars, 3 nos both ways with lifting hook made out of 8 mm dia bar, watering arrangement with funnel and wire mesh and 20 mm bore light grade G.I. watering pipe, common salt and charcoal filling, including necessary excavation and earth work and testing on completion to achieve value not more than 2.0 ohm complete all as specified and directed.

S&F exhaust fan, high speed, steel body 225mm sweep, 1200 RPM, four blade, heavy duty motor, copper wound double ball bearings, grey colour with louver fixed on wall by making suitable size of hole and proper arrangement with nuts, bolts and washers and three core 0.75sqmm copper cable connection complete all as specified & directed.

Supply and laying PVC insulated, armoured, heavy duty electric cable, with stranded aluminum conductor 1100 V grade nominal cross sectional area 16 Sqmm, 2 core laid in trenches, ducts, drawn through pipes across the road/ path /along poles / wall/ floors/ equipments etc including jointing and testing complete all as specified and directed by the Engr-in-Charge

M&L for sand cushioning to cable with dry fine sand in trenches 8 cm below the cable and 15 cm above the cable after laying complete all as specified and directed by the Engr-in-Charge Note : punned thickness shall be measured for payment.

M & L bricks for protection cover to UG cable (with old size sub class B bricks) with width equal to length of brick, laid dry and flat abutting each other with gaps between adjecent bricks not exceeding 10mm complete all as specified and directed.

S & F 40 mm bore GI tubing light grade with all fitting (ISI marked), fixed to wall/ pole / laid in road crossing etc as reqd complete all as specified and directed.

Supply and fixing ceiling fan 1200mm sweep 50 Hz AC 230 votls, 5 star rated in white colour with BLDC fan motor, blade set, 0.45 mtr down rod, canopy set, rubber reel including 0.5 Sqmm three core PVC insulated flexible copper conductor multistranded wire from fan motor to ceiling and writing MES No. on fan body as required complete all as specified and directed.

Supply and fixing energy efficient recessed mounted LED luminaire suitable for 2'x2' grid ceiling with full glow fully diffused diffuser and lumen output of 3600 lumens having constant current electronic driver of 36 watt duly connected with 0.5 sqmm white colour PVC insulated & sheathed three core flexible multi stranded copper conductor cable as required.

Supply install commissioning and testing of hi-wall split Air Condition units in Stone walls - Type: Split AC, Inverter Model/ 5 Star Rating, adhering to Specified BEE & EER above 3.1, Refrigerant R 410 A Environmental Friendly Gas- indoor/outdoor complete with and incl cordless remote control unit and with in -built air ioniser and Plasma filter for better indoor air quality, Evaporator & Condenser Coils and of capacity 2.0 TR, service wire incl outdoor mounting stand complete all as specified and directed.

Supply and fix Voltage stabilizer for automatic operation, single phase naturally air cooled indoor type & designed input variation between 170 V to 250 V with ouput stabilized at 230 V with accuracy +2.5% and of capacity 5.0 KVA complete all as specified and directed.

S&F Copper Tubing suitable for the item Nos 179 in extended lenghs as requird from indoor to outdoor and Suitable insulation of Nitrile Rubber insulation fixing arrangement commissioning and testing complete all as specified and directed. Note : One meter run of sunction line of size 1/2" or 3/8" and liquid line of size 1/4" alongwith nitrile rubber insulation is counted as one RM for measurement purpose

Cutting of Stone walls and placing of 4" dia PVC pipe of required length for split AC pipe lines Power lines and drain pipe through and making the surface good for further installation process complete all as specified and directed.

M&L for sub main wiring with two run of 6 Sqmm PVC insulated FRLS multistranded copper conductor cable alongwith one run of 6 Sqmm earth wire as earth continuity conductor (Phase-Red, Neutral-Black, Earth-Green) drawing into and including concealed rigid non mettalic PVC conduit of size 25mm, medium grade, ISI marked ivory colour alongwith accessories of suitable size including making connection as required and making good the disturbed portion complete all as specified and directed. NOTE - Two run of 6 sqmm phase and neutral wire & One run of 6 sqmm earth wire & One run of PVC conduit with accessories shall be measured as One length.

Note:- The contract sum shall be calculated by deducting the amount shown in Credit Schedule attached to this tender, from total amount of Schedule 'A'/BOQ

ANKIT BUILDERS

UNIVERSAL INFRAPROJECT PVT LTD